SCCM 2012 R2 updates - CU1, CU2, MDT 2013

Hi All,
Looking at upgrading to CU1 & CU2. Are there any know issues or prerequisites I need to look out for? Is it worth upgrading?
Also I see MDT 2013 is available. Is it worth upgrading from 2012?

Hi,
There is a known issue described in "Description of Cumulative Update 2 for System Center 2012 R2 Configuration Manager". You could have a look.
"The SQL update part of the cumulative update installation process may return a warning message if you manage mobile devices by using Configuration Manager and Windows Intune. This message does not stop the installation process. However, additional
steps will be required to make sure that the site database is fully updated."
http://support.microsoft.com/kb/2970177/en-us
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

SCCM 2012 SP1 update to R2

Hi!
SCCM 2012 SP1 update to R2.
I use SQL 2008R2 SP2 (10.50.4000.0), this version is Ok for SCCm 2012 R2 update?
cenubit

Yes it is.
See supported configurations
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
Also, see procedure to upgrade from SP1 to R2
http://www.gerryhampsoncm.blogspot.ie/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
Also, note that CU1 for R2 has also been released. You should apply this afterwards.
http://support.microsoft.com/kb/2938441/en-us
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 R2 sp1 cu1 ccmsetup.exe still 5.00.7958.1000

I downloaded sccm 2012 r2 sp1 cu1. I applied the server update to our Primary server. I also pushed out the client update (5.00.7958.1203) to all of our servers. But I have noticed that any new servers are still showing client version as
5.00.7958.1000. I checked the version of ccmsetup.exe on our Sccm primary server and it is showing 5.00.7958.1000. I would have thought when I applied the sccm 2012 r2 sp1 cu1 server update to the primary server it would have updated the ccmsetup.exe
to version 5.00.7958.1203. I know with time the client on new boxes will be updated with the client update push I have running on all windows server collection, but why not just have the most current version from the start. I searched for
an updated copy of ccmset.exe on the primary server, but never found it. I checked MS site for the most current version of sccm 2012 client install, but could find that either. Any help would be greatly appreciated,
Mark

Nope. CU1 is simple an update that must be layered on top of the R2 client. You can do this using either SCUP or a program deployment using the package/program that was created during the CU setup.
For reference:
http://technet.microsoft.com/en-us/library/jj553405.aspx
As a side note, this is something on most folks top 10 list of things they want changed but don't count on anything anytime soon.
Jason | http://blog.configmgrftw.com

WinPE Error Capture and Deploy Win7 - SCCM 2012 R2 w/ CU1

Hi Forum
Deploy and Capture: Windows 7 x64
SCCM Primary single site server: Server 2012 R2
Version: SCCM 2012 R2 w/ CU1
Environment is Hyper-V on Windows 8.1, deploying to a Gen1 VM with a legacy adapter.
I am running into an issue whilst building a lab environment. I have built a Capture and Deploy TS (using the standard TS, ie not MDT although this is integrated) and deployed to an imported machine using the MAC address via PXE. Custom Client package has
been created and put against the TS.
The machine picks up the PXE response and boots into the SCCM WinPE environment and I choose the TS. The only currently available TS is the Build and Capture.
It runs through the TS restarting at various points as expected and then after the Client Manager package is installed it restarts and runs the TS... at this point it starts saying. "Initiating Hardware Devices.." (or something to that effect).
It does this for about 15 seconds before I get this error:
Windows PE initialization failed with error code 0x8022001B
Seen here:
I am unable to get the cmd prompt up at this point and it will restart and carry on a normal build, no TS running, meaning no capture.
If any can advise, please do.
Thanks in advance
NN

Hyper-V should work fine without any drivers injected, and you did your VM correctly.
During this error, what you see in a back ground, ConfMgr wallpaper or Windows 7 black first-run screen "preparing/first run"? I´m just thinking, is there any chance, that you have additional restart step set to boot to WinPE, instead of booting
to default OS?
Otherwise, you will need to be able to Access CMD with F8 for more troubleshooting. Make sure you have F8 command Support enabled on boot image and re-distrubute it. Or create new boot image as Peter suggested.

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

How to update CU1 & CU2 to SCCM 2012 R2

I Install SCCM 2012 R2 then I install CU1 immediately. After about 2 months, I install CU2 in Primary Site.
Now I found some bug, but it should be fixed by CU, then I found this is because I didn't push CU to client.
So I have some questions about Update CU
After Install CU2, I find KB2970177 in server, click "about CM", show the version is
5.0.7958.1303, but I click the properties of primary site. the version is
5.00.7958.1000. Why? Did I finish the Update in primary site?
If I only install SCCM 2012 R2, can I install CU2 without install CU1 first or I must install CU1 before install CU2?
How to deploy CU to Client, I found the package of CU client update. But can I create applications to deploy? or Use software update or compliance? If have some post about these?
I use default Configuration Manager Client Package to do the OSD, can I create new package with CU2?
Thanks in advance!

Check out this blog:
http://blogs.technet.com/b/ryanan/archive/2014/01/31/applying-a-configmgr-hotfix-during-the-client-installation-of-an-os-deployment.aspx
You essentially can create a new client package with the client hotfix files.
Then adjust your Setup Windows and ConfigMgr TS step by adding the appropriate patch command to the properties section.
I mentioned this in a blog I did about applying R2 CU1. Same process applies with CU2 of course.
http://damonjohns.com/2014/04/08/applying-the-adk-8-1-update-and-cu1-for-system-center-2012-r2-configuration-manager/
Cheers
Damon

SCCM 2012 Software updates

Hi All,
We have SCCM 2012 R2 Server, We have been using more than a years ,
Now im facing crazy issues .
1.every month we using sccm server for deploying windows patches .
2.before patching we set maintenance schedules for device group.
3.patch deployment is working fine without any issues and we get the success 100 % compliants report in all the server .
Note:- but after one or two months later in Monitoring-->deployment tab-->its showing only few machines success results or deploying again old package''
this process is keep on rotating in all the deployment .
how to resolve this issues.
Regards,
Velu M

Hi,
You could try to initiate Software Updates Deployment Evaluation Cycle action from a problematic client, then check CIAgent.log, StateMessage.log to see if there are any helpful information.
Reference:
SCCM state messaging–in depth:http://blogs.msdn.com/b/steverac/archive/2011/01/07/sccm-state-messaging-in-depth.aspx
You could also follow the steps in the blog below to check state messages in WMI.
Software Update Compliance Reports – Detection State Unknown
http://blogs.technet.com/b/configmgrdogs/archive/2013/11/07/software-update-status-reports-detection-state-unknown.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 r2 with CU1 - XP Refresh

Hi Everyone,
Hoping someone out there can assist with this. I am doing a refresh for XP to win7. I have read
http://social.technet.microsoft.com/Forums/en-US/6e934990-999a-4367-860a-3ce4e5eda956/sccm-2012-r2-error-0x800700c1?forum=configmanagerosd
and
http://www.windows-noob.com/forums/index.php?/topic/9418-referesh-task-sequence-from-xp-fails-on-sccm-2012-r2/
none of these work. I took a look at this and I was able to get pass the staging of the boot image
http://blogs.technet.com/b/brandonlinton/archive/2013/06/21/how-to-create-and-import-a-winpe-3-1-boot-image-for-use-in-configmgr-2012-sp1-cu2.aspx
however when the machine rebooted I received this. I also inject the nic drivers using dism and still the same issue. Any idea of a fix or how to go about refresh for
XP using sccm 2012 r2?
thanks all!

Hi,
Also ran into this issue, you're encountering this error because some components are missing in your WinPE image.
Note that this refresh scenario is not supported, however you can get this to work by manually customizing (especially importing WMI component) your WinPE image
before importing it ConfigMgr.
I made the script below, ran in on a base WinPE image from WADK for Windows 8 (a 6.2 version image so) to make it work (sorry for french comments Inside but I'm sure you'll get it :) ):
#Adapt these variables to you environment
$ADK = "C:\Program Files (x86)\Windows Kits\8.0\Assessment and Deployment Kit" #Chemin d'ADK
$DismArchitecture = "amd64" #archi a utiliser pour DISM
$CompArchitecture = "x86" #archi a utiliser pour les composants
$MountDir = "e:\Mount" #point de montage a utiliser
$Wimdir = "E:\winpe.wim" #chemin du wim a modifier
$InjectDrivers = $TRUE #Choisir si il faut ajouter des pilotes ou non
$DriversDir = "E:\Pilotes\WinPE3.1_x86" #chemin contenant les pilotes
$AddCMTrace = $FALSE #Choisir si il faut ajouter cmtrace ou non
$CMTraceDir = "E:\Microsoft Configuration Manager\tools\cmtrace.exe" #chemin de cmtrace
$ChangeLocale = $TRUE #Choisir si il faut modifier les paramètre regionnaux ou non
$Locale = "fr-FR" #param regionnaux a utiliser
$DismFolder = "$ADK\Deployment Tools\$DismArchitecture\DISM" #ne pas modifier
$OptComponents = "$ADK\Windows Preinstallation Environment\$CompArchitecture\WinPE_OCs"; #ne pas modifier
$AddOPTComponents = $TRUE #Choisir si il faut ajouter des composants ou non
#liste des composants:
$ComponentList = @(
“$OptComponents\WinPE-WMI.cab”
“$OptComponents\$Locale\WinPE-WMI_$Locale.cab”
“$OptComponents\en-us\WinPE-WMI_en-us.cab”
“$OptComponents\WinPE-NetFx4.cab”
“$OptComponents\$Locale\WinPE-NetFx4_$Locale.cab”
“$OptComponents\en-us\WinPE-NetFx4_en-us.cab”
“$OptComponents\WinPE-HTA.cab”
“$OptComponents\$Locale\WinPE-HTA_$Locale.cab”
“$OptComponents\en-us\WinPE-HTA_en-us.cab”
“$OptComponents\WinPE-DismCmdlets.cab”
“$OptComponents\$Locale\WinPE-DismCmdlets_$Locale.cab”
“$OptComponents\en-us\WinPE-DismCmdlets_en-us.cab” );
#Composants pour WinPE 6.3: (a inserer a la place de NetFx4)
#“$OptComponents\WinPE-NetFx.cab”
#“$OptComponents\$Locale\WinPE-NetFx_$Locale.cab”
#“$OptComponents\en-us\WinPE-NetFx_en-us.cab”
#“$OptComponents\WinPE-PowerShell.cab”
#“$OptComponents\$Locale\WinPE-PowerShell_$Locale.cab”
#-----debut du script
#Creation du point de montage
New-Item -ItemType Directory -Force -Path $MountDir
#import de DISM
import-module $DismFolder
#montage de l'image
Write-Host "Mounting WIM file"
Mount-WindowsImage -ImagePath $Wimdir -Index 1 -Path $MountDir -ErrorAction Stop
#changement de locale
if($ChangeLocale -eq $TRUE)
Write-Host "Changing locale"
cd $DismFolder
dism.exe /image:$MountDir /set-syslocale:$Locale
dism.exe /image:$MountDir /set-userlocale:$Locale
dism.exe /image:$MountDir /set-inputlocale:$Locale
#ajout de cmtrace
if($AddCMTrace -eq $TRUE)
Write-Host "Adding CMTrace"
$CMTraceDest = $MountDir + "\Windows\System32"
Copy-Item -Path $CMTraceDir -Destination $CMTraceDest
#ajout des pilotes
if($InjectDrivers -eq $TRUE)
Write-Host "Injecting Drivers"
Add-WindowsDriver -Recurse -ForceUnsigned -Driver $DriversDir -Path $MountDir -Verbose -ErrorAction SilentlyContinue
#ajout des composants
if($AddOPTComponents -eq $TRUE)
Write-Host "Adding Optionnal Components"
foreach ($Component in $ComponentList)
Write-Host -Object (’Installing component: {0}’ -f $Component);
Add-WindowsPackage -Path $MountDir -PackagePath $Component -ErrorAction SilentlyContinue;
#demontage de l'image
Write-Host "Unmounting WIM file"
Dismount-WindowsImage -Path $MountDir -Save -Verbose
Mickael, My technet galleries contributions : ConfigMgr driver injector : http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d SCCM Collection splitter : http://gallery.technet.microsoft.com/SCCM-Collection-Splitter-e1c82b06 ConfigMgr
TS Tools : http://gallery.technet.microsoft.com/TSTools-f9b01357

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

SCCM 2012 R2 - Updates not installing

Hi all,
I have a SCCM 2012 R2 setup at a customer which has problems with distributing updates to the Windows 7 computers in the environment. The update group (with updates that are 100% sure required) is deployed to some test computers but the updates don't get
installed. It is also configured to be able to install the updates without looking at any maintenance windows. I see in the reporting that the updates are required, so in my opinion they should get installed.
I've checked the registry and the Windows Updates registry keys are pointing towards the right server (my SCCM primary site server). I've created a new software update group with fewer updates, same problem.
What I find in the UpdatesDeployment.log on one of the test machines is rather strange:
Assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B} has total CI = 2
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) reconnected to the existing job ({779CA9E2-ABB8-43E1-B8AE-F4A94BA8C761}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment {c076f100-c2f7-43f9-a3f9-51fd33872b94} has total CI = 216
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({c076f100-c2f7-43f9-a3f9-51fd33872b94}) reconnected to the existing job ({A9758363-1871-4BD9-86D9-1BE0D82531AE}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
OnPolicyModify for assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B})...
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
Work in progress for assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B}, forced trigger (TriggerEnforce) will be attempted when done
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4532 (0x11B4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4000 (0x0FA0)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Removing scan history to force non cached results
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 15:46:47 4836 (0x12E4)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>True</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 17:06:31 6032 (0x1790)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Suspend activity in presentation mode is selected
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Proceeding to non-business hours activites as presentation mode is off.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Attempting to install 0 updates UpdatesDeploymentAgent
29/09/2014 22:00:00 3240 (0x0CA8)
No actionable updates for install task. No attempt required.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Updates could not be installed at this time. Waiting for the next maintenance window.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT END Event
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
No current service window available to run updates assignment with time required = 1
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
Attempting to cancel any job started at non-business hours.
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
There are several updates found in the assignment (2 in the first, 216 in the second). Some of them are required but still the log says: No actionable updates.
The SERVICEWINDOWEVENT events originate from the business hours set in the client settings I suppose?
But I don't get why the log sais "No current service window available to run updates assignment with time required = 1"
Any advice?
Kind regards,
Bert

Hi,
What's the status in Software Center on clients?
Please check ScanAgent.log, WUAHandler.log, UpdatesHandler.log and Windowsupdate.log on the client to see if there is any helpful information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012: Assigned updates to update group don't get there deployment

Hello,
Problem:
When I assign available updates to the update group the updates are not getting there deployment. Deployed: NO
(Previous months no problem)
Situation:
SCCM 2012 SP1
We made different Update groups. Example:
Windows 2008 R2
This group is deployed to different collections and has several deployments.
Steps taken:
Downloaded the new updates to Windows 2008 R2 Deployment Package (no errors)
Edit Membership and added updates to the Windows 2008 R2 update group (no errors)
When I check the update group I see the assigned updates in the group. The Downloaded Status is YES but the Deployed status is NO. When I check the update deploymensts it has no deployments.
Any idea where to find a solution for the problem? Which logs files to check?
Greetings

You could try and run this sql query to check the database directly and see if IsDeployed = 1 here. If that is the case there is just the console that is not updated. You'll need to change the Config Item ID (in red) to match the ID of your group, you'll
find this in the console. (Right click columns and add it)
select all upd.CI_ID,upd.LocaleID,upd.ApplicabilityCondition,upd.ArticleID,upd.BulletinID,upd.CI_ID,upd.CI_UniqueID,upd.CIType_ID,upd.CIVersion,upd.CreatedBy,upd.CustomSeverity,upd.CustomSeverityName,upd.DateCreated,upd.DateLastModified,upd.DatePosted,upd.DateRevised,upd.EffectiveDate,upd.EULAAccepted,upd.EULAExists,upd.EULASignoffDate,upd.EULASignoffUser,upd.IsUserCI,upd.InUse,upd.IsBroken,upd.IsBundle,upd.IsChild,upd.IsContentProvisioned,upd.IsDeployable,upd.IsDeployed,upd.IsEnabled,upd.IsExpired,upd.IsHidden,upd.IsLatest,upd.IsMetadataOnlyUpdate,upd.IsOfflineServiceable,upd.IsQuarantined,upd.IsSuperseded,upd.IsUserDefined,upd.LastModifiedBy,upd.LastStatusTime,upd.Description,upd.DisplayName,upd.CIInformativeURL,upd.LocaleID,upd.MaxExecutionTime,upd.ModelID,upd.ModelName,upd.NumMissing,upd.NumNotApplicable,upd.NumPresent,upd.NumTotal,upd.NumUnknown,upd.PercentCompliant,upd.PermittedUses,upd.PlatformType,upd.RequiresExclusiveHandling,upd.RevisionNumber,upd.SDMPackageVersion,upd.SedoObjectVersion,upd.Severity,upd.SeverityName,upd.SourceSite
from fn_ListUpdateCIs(1033) as upd,vSMS_CIRelation as cr where ((cr.FromCIID =
16822104
AND cr.RelationType = 1) AND upd.CI_ID = cr.ToCIID)

Deploy SCCM 2012 Monthly updates (not with ADR), updates get expired

Hi,
I’m looking howto use monthly updates in SCCM 2012 R2. This post is showing howto with automatic deployment rules (ADR), but I’d need to do this without ADR.
http://www.windows-noob.com/forums/index.php?/topic/6799-using-system-center-2012-configuration-manager-part-9-deploying-monthly-updates/
What I do:
1.filter on updates I need
2.add them to an update group
3.distribute these updates as mandatory to our default windows 7 collection
Now everything works fine until some updates in the update group get expired. Then no updates are distributed anymore. Please advise.
J.
Jan Hoedt

Leave the expired updates and group the remaining updates (create software group fo these) and deploy to your clients.
Search the updates in sccm console: Add criteria: Expired NO
Have a look in this post (Software updates deployment without ADR)
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-rc-in-a-lab-part-6-deploying-software-updates/
Thanks, Prabha G

SCCM 2012 R2 Update not Downloading

Hi
i had install SCCM 2012 R2 and WSUS on the same server and i configure the software update point component .(End Point Protection) when I'm trying
to download software update, i click on All software updates repository right click and run synchronization i cant see any update.
wsyncmgr.log :
Thread terminated by service request. $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:41:50.922-330><thread=5384 (0x1508)>
SMS_EXECUTIVE started SMS_WSUS_SYNC_MANAGER as thread ID 5976 (0x1758). $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.078-330><thread=2736 (0xAB0)>
Log level 2 $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.309-330><thread=5976 (0x1758)>
Wakeup by SCF change $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 15:19:48.428-330><thread=5976 (0x1758)>
Please help

WCm log error
Remote configuration failed on WSUS Server.   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=BDC.mydomain.com SITE=NAV PID=2648 TID=5680 GMTDATE=Tue Jul 15 08:11:13.273 2014 ISTR0="BDC.mydomain.com" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=0   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Setting new configuration state to 3 (WSUS_CONFIG_FAILED)   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)
Waiting for changes for 49 minutes   SMS_WSUS_CONFIGURATION_MANAGER   7/15/2014 1:41:13 PM   5680 (0x1630)

SCCM 2012 SP1 Update to CU5 not showing version 1600 for clients updated !

Recently upgraded SCCM 2012 SP1 and its showing a version of 5.0.7804.1600 as it should be. Pushed out the CU 5 client manager update to few machines and they are also showing .1600 as the version, however in SCCM 2012 manager itself it is not updating the
status of those machines from say .1000 or .1400 to .1600. Why is this happening and any solution for it ? I have also updated the CM on the server hosting the SCCM and is current to .1600 version.

Because the client agent version is returned from clients via heartbeat discovery which only occurs by default every 7 days. Thus, you need to be patient. Note that I generally recommend reducing the heartbeat cycle to at least once a day partly for
this reason.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 R2 updates - CU1, CU2, MDT 2013

Similar Messages

Maybe you are looking for