Sccm 2012 R2, upgrade, sms agent host,

Hi
We have today updated from sccm 2012 sp1 cu2 to sccm 2012 R2 however stupidly when R2 had finished there were 3 post upgrade actions I needed to do but I didn't write then down I hoped this was going to be in the configmgrsetup log but hasn't.
Now I find I cant use config manager and the sms agent host, dsm sa data manager and dsm sa connection service all wont start.
Does anyone have any pointers for me please other than to write things down proper.
Regards
Dave

Hi,
Have you seen this KB.
A service does not start, and events 7000 and 7011 are logged in Windows Server 2003, Windows Server 2008, and Windows Server 2008 R2
http://support.microsoft.com/kb/922918/en-us
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

SCCM 2012 R2 SMS Agent Host service crashing every 10 seconds on Secondary Site Client PCs running Win7

Hi Teem;
We are having the following issue with SCCM 2012 R2: The SMS Agent Host service keeps on crashing on Client PCs with in the Secondary site! the issue isn't happening at the primary site!
We have 3 SCCM 2012 R 2 servers: CAS & Pri @ the DataCenter site and the Secondary site in the office site.
Please advise.
Thank you.

The client is entering a loop, here are some lines of the ClientIDManagerStartup.log:
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
   HardwareID1=2:ED42563E6365D1A53E55EE48D92A4CDF5D208373
   HardwareID2=6CBB0600010000FE   ClientIDManagerStartup   3/21/2014 11:11:30 AM   3760 (0x0EB0)
RegEndpoint: Spawning task to re-register in 5000 milliseconds.   ClientIDManagerStartup   3/21/2014 11:11:43 AM   3760 (0x0EB0)
[----- SHUTDOWN -----]   ClientIDManagerStartup   3/21/2014 11:11:52 AM   1428 (0x0594)
[----- STARTUP -----]   ClientIDManagerStartup   3/21/2014 11:11:55 AM   1604 (0x0644)
Machine: SCCM-TEST02   ClientIDManagerStartup   3/21/2014 11:11:55 AM   1604 (0x0644)
OS Version: 6.1   ClientIDManagerStartup   3/21/2014 11:11:55 AM   1604 (0x0644)
SCCM Client Version: 5.00.7958.1000   ClientIDManagerStartup   3/21/2014 11:11:55 AM   1604 (0x0644)
'RDV' Identity store does not support backup.   ClientIDManagerStartup   3/21/2014 11:11:55 AM   1604 (0x0644)
CCM Identity is in sync with Identity stores   ClientIDManagerStartup   3/21/2014 11:11:55 AM   1604 (0x0644)
Client is set to use HTTPS when available. The current state is 224.   ClientIDManagerStartup   3/21/2014 11:11:55 AM   1604 (0x0644)
[RegTask] - Executing registration task synchronously.   ClientIDManagerStartup   3/21/2014 11:11:56 AM   3928 (0x0F58)
Read SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100   ClientIDManagerStartup
3/21/2014 11:11:56 AM   3928 (0x0F58)
Evaluated SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100
ClientIDManagerStartup   3/21/2014 11:11:56 AM   3928 (0x0F58)
No SMBIOS Changed   ClientIDManagerStartup   3/21/2014 11:11:56 AM   3928 (0x0F58)
SMBIOS unchanged   ClientIDManagerStartup   3/21/2014 11:11:56 AM   3928 (0x0F58)
SID unchanged   ClientIDManagerStartup   3/21/2014 11:11:56 AM   3928 (0x0F58)
HWID unchanged   ClientIDManagerStartup   3/21/2014 11:11:57 AM   3928 (0x0F58)
Windows To Go requires a minimum operating system of Windows 8   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
Windows To Go requires a minimum operating system of Windows 8   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
Computed HardwareID=2:ED42563E6365D1A53E55EE48D92A4CDF5D208373
   Win32_SystemEnclosure.SerialNumber=<empty>
   Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
   Win32_BaseBoard.SerialNumber=None
   Win32_BIOS.SerialNumber=VMware-56 4d 44 fe 3d ad af 3f-d4 e8 3f 19 48 d8 e2 71
   Win32_NetworkAdapterConfiguration.MACAddress=00:0C:29:D8:E2:71   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
[RegTask] - Client is not registered. Sending registration request for GUID:1A54B9A0-E658-4F89-8D39-A47220CD5C48 ...   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
[RegTask] - Client is registered. Server assigned ClientID is GUID:1A54B9A0-E658-4F89-8D39-A47220CD5C48. Approval status 1   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
'RDV' Identity store does not support backup.   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
[RegTask] - Client is registered. Exiting.   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
Read SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100   ClientIDManagerStartup
3/21/2014 11:11:59 AM   3928 (0x0F58)
Evaluated SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100
ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
No SMBIOS Changed   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
SMBIOS unchanged   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
SID unchanged   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
HWID unchanged   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
Windows To Go requires a minimum operating system of Windows 8   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
Computed HardwareID=2:ED42563E6365D1A53E55EE48D92A4CDF5D208373
   Win32_SystemEnclosure.SerialNumber=<empty>
   Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
   Win32_BaseBoard.SerialNumber=None
   Win32_BIOS.SerialNumber=VMware-56 4d 44 fe 3d ad af 3f-d4 e8 3f 19 48 d8 e2 71
   Win32_NetworkAdapterConfiguration.MACAddress=00:0C:29:D8:E2:71   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
   HardwareID1=2:ED42563E6365D1A53E55EE48D92A4CDF5D208373
   HardwareID2=6CBB0600010000FE   ClientIDManagerStartup   3/21/2014 11:11:59 AM   3928 (0x0F58)
RegEndpoint: Spawning task to re-register in 60000 milliseconds.   ClientIDManagerStartup   3/21/2014 11:12:13 AM   3232 (0x0CA0)
[----- SHUTDOWN -----]   ClientIDManagerStartup   3/21/2014 11:13:16 AM   1604 (0x0644)
[----- STARTUP -----]   ClientIDManagerStartup   3/21/2014 11:13:16 AM   3516 (0x0DBC)
Machine: SCCM-TEST02   ClientIDManagerStartup   3/21/2014 11:13:16 AM   3516 (0x0DBC)
OS Version: 6.1   ClientIDManagerStartup   3/21/2014 11:13:16 AM   3516 (0x0DBC)
SCCM Client Version: 5.00.7958.1000   ClientIDManagerStartup   3/21/2014 11:13:16 AM   3516 (0x0DBC)
'RDV' Identity store does not support backup.   ClientIDManagerStartup   3/21/2014 11:13:16 AM   3516 (0x0DBC)
CCM Identity is in sync with Identity stores   ClientIDManagerStartup   3/21/2014 11:13:16 AM   3516 (0x0DBC)
Client is set to use HTTPS when available. The current state is 224.   ClientIDManagerStartup   3/21/2014 11:13:16 AM   3516 (0x0DBC)
[RegTask] - Executing registration task synchronously.   ClientIDManagerStartup   3/21/2014 11:13:19 AM   3792 (0x0ED0)
Read SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100   ClientIDManagerStartup
3/21/2014 11:13:19 AM   3792 (0x0ED0)
Evaluated SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100
ClientIDManagerStartup   3/21/2014 11:13:19 AM   3792 (0x0ED0)
No SMBIOS Changed   ClientIDManagerStartup   3/21/2014 11:13:19 AM   3792 (0x0ED0)
SMBIOS unchanged   ClientIDManagerStartup   3/21/2014 11:13:19 AM   3792 (0x0ED0)
SID unchanged   ClientIDManagerStartup   3/21/2014 11:13:19 AM   3792 (0x0ED0)
HWID unchanged   ClientIDManagerStartup   3/21/2014 11:13:20 AM   3792 (0x0ED0)
Windows To Go requires a minimum operating system of Windows 8   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
Windows To Go requires a minimum operating system of Windows 8   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
Computed HardwareID=2:ED42563E6365D1A53E55EE48D92A4CDF5D208373
   Win32_SystemEnclosure.SerialNumber=<empty>
   Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
   Win32_BaseBoard.SerialNumber=None
   Win32_BIOS.SerialNumber=VMware-56 4d 44 fe 3d ad af 3f-d4 e8 3f 19 48 d8 e2 71
   Win32_NetworkAdapterConfiguration.MACAddress=00:0C:29:D8:E2:71   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
[RegTask] - Client is not registered. Sending registration request for GUID:1A54B9A0-E658-4F89-8D39-A47220CD5C48 ...   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
[RegTask] - Client is registered. Server assigned ClientID is GUID:1A54B9A0-E658-4F89-8D39-A47220CD5C48. Approval status 1   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
'RDV' Identity store does not support backup.   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
[RegTask] - Client is registered. Exiting.   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
Read SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100   ClientIDManagerStartup
3/21/2014 11:13:22 AM   3792 (0x0ED0)
Evaluated SMBIOS (encoded): 56004D0077006100720065002D00350036002000340064002000340034002000660065002000330064002000610064002000610066002000330066002D0064003400200065003800200033006600200031003900200034003800200064003800200065003200200037003100
ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
No SMBIOS Changed   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
SMBIOS unchanged   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
SID unchanged   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
HWID unchanged   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
Windows To Go requires a minimum operating system of Windows 8   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
Computed HardwareID=2:ED42563E6365D1A53E55EE48D92A4CDF5D208373
   Win32_SystemEnclosure.SerialNumber=<empty>
   Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
   Win32_BaseBoard.SerialNumber=None
   Win32_BIOS.SerialNumber=VMware-56 4d 44 fe 3d ad af 3f-d4 e8 3f 19 48 d8 e2 71
   Win32_NetworkAdapterConfiguration.MACAddress=00:0C:29:D8:E2:71   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
   HardwareID1=2:ED42563E6365D1A53E55EE48D92A4CDF5D208373
   HardwareID2=6CBB0600010000FE   ClientIDManagerStartup   3/21/2014 11:13:22 AM   3792 (0x0ED0)
RegEndpoint: Spawning task to re-register in 5000 milliseconds.   ClientIDManagerStartup   3/21/2014 11:13:36 AM   3672 (0x0E58)

SCCM 2012 SP1 CU4 ccmsetup runs with SMS Agent Host on the "Service" mmc after upgrading the client to CU4.

Dear Brothers,
I have an issue with two (2) of my Site Servers, I have below scenarioa and explained issue details:
Scenario:
1. Server1: Windows 2012 Server, CAS, SCCM 2012 Hierarchy Roles: Management Point, DP, SUP, Component Server.
2. Server2: Windows 2008 R2 Server, Secondary Site Role, SCCM 2012 Hierarchy Roles: Management Point, DP, Component Server.
Issue:
After updating the SCCM 2012 Client to CU4 on the actual Site Server, the "ccmsetup" appears also with "SMS Agent Host"
at the Service MMC. Which I believed this is very unusual behavior.
The Client however it seems properly installed and working please see below details:
Questions: I believed the Client installations are still running on the background, even though the Client tends to look working on the Control Panel.
1. How can I resolved this issue?
2. Should I need to perform a total Client uninstallation, even depth till removing entries in the Registry levels?
3. Or this is a normal behavior for the scenario?
Advance thanks for your future replies, my brothers in technology.

Dear Brother,
2 Weeks since I installed the CU4, it seems a little bit to long isn't it? for both the ccmsetup and the SMS Host Agent Services to exist, for the errors on the ccmsetup.log there are some errors after uninstallation since I am trying to removed
the issue .
CCMsetup.log
==========[ ccmsetup started in process 5376 ]========== 7/1/2014 7:14:45 PM 4104 (0x1008)
Running on platform X64 7/1/2014 7:14:45 PM 4104 (0x1008)
Updated security on object C:\Windows\ccmsetup\cache\. 7/1/2014 7:14:45 PM 4104 (0x1008)
Launch from folder C:\Windows\ccmsetup\ 7/1/2014 7:14:45 PM 4104 (0x1008)
CcmSetup version: 5.0.7804.1500 7/1/2014 7:14:45 PM 4104 (0x1008)
Running on OS (6.2.9200). Service Pack (0.0). SuiteMask = 272. Product Type = 3 7/1/2014 7:14:45 PM 4104 (0x1008)
Ccmsetup command line: ccmsetup.exe /uninstall 7/1/2014 7:14:45 PM 4104 (0x1008)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. 7/1/2014 7:14:45 PM 4104 (0x1008)
Command line: ccmsetup.exe /uninstall 7/1/2014 7:14:45 PM 4104 (0x1008)
SslState value: 224 7/1/2014 7:14:45 PM 4104 (0x1008)
Detected client version 5.00.7804.1500 from WMI. 7/1/2014 7:14:45 PM 4104 (0x1008)
Updated security on object C:\Windows\ccmsetup\. 7/1/2014 7:14:45 PM 4104 (0x1008)
Another instance of ccmsetup is already running. 7/1/2014 7:14:45 PM 4104 (0x1008)
Task 'Configuration Manager Client Upgrade Task' does not exist 7/1/2014 7:14:45 PM 4104 (0x1008)
CcmSetup is exiting with return code 3 7/1/2014 7:14:45 PM 4104 (0x1008)
MSI: Action 19:15:20: SmsRemoveUIEvents. This custom action is no longer used. The custom action used to remove the COM+ event subscriber and publisher used for UI notifications. We no longer use COM+ events for UI notifications. 7/1/2014 7:15:20 PM 5628
(0x15FC)
MSI: Action 19:15:20: CcmUnregisterPerfCounters. Removes performance counters gathered in the CcmUnregisterPerfCountersInit action 7/1/2014 7:15:20 PM 5628 (0x15FC)
MSI: Action 19:15:20: CcmRemoveLanternDocuments. Removing documents from Microsoft Policy Platform that have been submitted by Configuration Manager authority. 7/1/2014 7:15:20 PM 5628 (0x15FC)
MSI: Action 19:15:30: CcmTypelibRollback. In the event of install failing, this event rolls back the type libraries to the state before install started. 7/1/2014 7:15:30 PM 5628 (0x15FC)
MSI: Action 19:15:30: SmsDeinstallDesktopClient. This custom action uninstalls the desktop client with following steps-
1. Makes sure there are no desktop client installations in progress and prevents any new instance of intallation.
2. Checks the desktop client version and gets the installation direcotry.
3. Stops remote control and other desktop components.
4. Kills the following client processes - clisvc1.exe, pea32.exe, smsapm32.exe, smsmon32.exe and sms_reen.exe.
5. Saves information needed for migration and uninstalls the desktop components followed by clean up. 7/1/2014 7:15:30 PM 5628 (0x15FC)
MSI: Action 19:15:30: CcmDetectFilesInUseRollback. Rolls back files moved by CcmDetectFilesInUse. 7/1/2014 7:15:30 PM 5628 (0x15FC)
MSI: Action 19:15:30: CcmDetectFilesInUse. Moves files that are in use so that they will be deleted upon the next reboot. 7/1/2014 7:15:30 PM 5628 (0x15FC)
MSI: Action 19:15:31: CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this we cannot rollback. 7/1/2014 7:15:31 PM 5628 (0x15FC)
MSI: Action 19:15:31: InstallFiles. Copying new files 7/1/2014 7:15:31 PM 5628 (0x15FC)
MSI: Internal Error 2902. ixfAssemblyCopy 7/1/2014 7:15:32 PM 5628 (0x15FC)
MSI: Action 19:15:32: Rollback. Rolling back action: 7/1/2014 7:15:32 PM 5628 (0x15FC)
File C:\Windows\ccmsetup\configmgr2012ac-sp1-kb2882125-x64.msp installation failed. Error text: ExitCode: 1603
Action: InstallFiles.
ErrorMessages:
Internal Error 2902. ixfAssemblyCopy
7/1/2014 7:15:33 PM 5628 (0x15FC)
A Fallback Status Point has not been specified. Message with STATEID='301' will not be sent. 7/1/2014 7:15:33 PM 5628 (0x15FC)
Deleted file C:\Windows\ccmsetup\ccmsetup.xml 7/1/2014 7:15:33 PM 5628 (0x15FC)
Deleted file C:\Windows\ccmsetup\client.msi 7/1/2014 7:15:33 PM 5628 (0x15FC)
CcmSetup failed with error code 0x80070643 7/1/2014 7:15:33 PM 5628 (0x15FC)
Regards,

SMS Agent Host Service requirement for Site Server or Site Systems

Is the SCCM Client a requirement on the SCCM 2012 Site Server or Site Systems or is it possible to disable SMS Agent Host Service or uninstall the client without affecting any of the Site roles? I have actually done that and everything
is working as expected but I wanted to make sure that none of the site roles are dependent on the client agent.

Hi,
Only need to install client when you want to manage the servers by Configuration Manager client.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SMS agent host service is not getting removed from Service.msc even after complete uninstallation

Dear Team,
i am trying to uninstall SCCM agent but still i am seeing "SMS agent host" in services.msc . But this service is getting removed after the client restart . But i want to clear this service without restarting the client.
Please find the below screen . Can some one help me on this
Raja

Hi Jason,
This is happening on random machines ... Even i tried for sc delete servicename .. which is not working but if i try
sc query ccmexec i am getting an output saying that service is stopped (but i am unable to remove)
Would be great if i get some solution ..
Raja

"SMS Agent Host" Automatic (Delayed Start)

Hi,
Our support think it take longtime to reconnect with the "Remote Control Viewer" if you rebooted the "Windows Client"
The "SMS Agent Host" is set to Automatic (Delayed Start), and I have seen both it is okey to change it to "automatic" and not. I found an post that it should be okey to set it to "automatic"? Is there any issue to do so?
https://social.technet.microsoft.com/Forums/en-US/c339a6cc-fb0d-4b15-8fed-06caee20b003/delayed-startup-on-sms-agent-host-service?forum=configmanagerdeployment
/SaiTech

Hi,
The remote control agent is separate from the SMS Agent host and can be changed to Automatic, see this previous thread.
https://social.technet.microsoft.com/Forums/en-US/778e5454-a968-4c5c-87df-470636e5e29b/changing-the-service-start-on-configuration-manager-remote-control-service?forum=configmanagergeneral
The reason the SMS Agent host is set to delayed start is to not effect the startup time for the user..
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Reports are not opening after SCCM 2012 R2 Upgrade

Hi,
I have upgraded my SCCM 2012 SP1 to R2, After that I am unable to run a report and getting below error
System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: Logon failure: unknown user name or bad password.
Seems it is a known issue after R2 upgrade,To resolve this issue we need to change the registry value for "EnableRbacReporting" to "0" under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP.
It was fine for some time,Later its value reverted back to "1" on its own and again reports stopped working.
Is there any other way to resolve this issue in order to make sure my reports are always available
Please help me.Thanks
srkr

Hi Paul,
We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
The command for SQL Server 2012 is:
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
folders>
DTS
SDK
Tools
srkr

SCCM 2012 R2 upgrade & broken reports

After upgrading to R2, everything went off w/o a hitch until we tried to run reports (see below for error)
Weird part is *some* of the admins can run reports just fine (for instance, two separate AD groups that are a part of the Full Administrators within SCCM, one can run, while the others cannot). We can also do this solution: http://www.netdavidic.com/2013/11/how-to-fix-sccm-2012-r2-reporting.html .
While this works, it is not a viable solution moving forward.
Our setup is pretty simple; single site server w/ all services, 2-3 DP's etc. Server 2012, SQL 2012 SP1. We upgraded from SCCM 2012 SP1.
The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: The user name or password is incorrect.
(rsRuntimeErrorInExpression)
Microsoft.Reporting.WinForms.ReportServerException
The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: The user name or password is incorrect.
(rsRuntimeErrorInExpression)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReportSoapProxy.OnSoapException(SoapException e)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
-------------------------------

Update:
TL;DR If you're running SQL services under a different context other than Local Service, you'll have problems.
The ultimate solution was this: http://social.technet.microsoft.com/Forums/en-US/77bad9b6-de0e-42d3-ae9f-e7c9d26b4330/reporting-error-after-upgrading-to-sccm-2012-r2?forum=configmanagergeneral
However, I'll provide a bit more detail in case anyone else runs into this.
In our environment, we run all SQL services as a separate account, say domain\CMSQLSERVICE account (so if you looked at the services, you'd see SQL Server, SQL Server Agent & SQL Server Reporting Services all running as CMSQLSERVICE). We also run
reporting as another account, say domain\CMSQLREPORTING account (SCCM console, Admin, Site Config, Servers & Sites, Reporting services point). Placing CMSQLREPORTING account into the Windows Authorization Access Group did not resolve the issue as
I had thought. We then placed CMSQLSERVICE account in there & everything worked as intended.
You'll be able to easily see the errors by looking on the reporting point / server with the SQL database for C:\Users\ACCOUNTRUNNINGSQLSERVICE\AppData\Local\Temp .
It took procmon to lead me to that location for the ultimate solution.

SCCM 2012 R2 Upgrade Error - Fails on SQL

Greetings,
I am currently working to upgrade our current SCCM 2012 SP1 CU3 servers to SCCM 2012 R2. i have ran all the pre-checks and all comes through without error. when doing the upgrade the following errors appear and as such it will not move forward.
can anyone please assist on this one? I have searched and searched but not found anything that will point me towards a resolve.
Thanks for the help and i really hope this will be an easy fix
JAK

Still looking for any sort of assistance on this one. not sure if the above capture was enough to give any insight so i am attaching the complete log. was going through multiple windows so copy past was not working, please see below...
TestDBUpgrade log:
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: Running SQL Server test query. Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA MASTER, Type: Secure Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: SQL Server Test query succeeded. Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
ERROR: Failed to get Service Pack version for SQL Server <SITE.DB.CA>. Configuration Manager Setup 04/02/2014 3:01:16 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Unsecure Configuration Manager Setup 04/02/2014 3:01:17 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:17 PM 3080 (0x0C08)
INFO: The size of the existing site database is 5.0 gigabytes. Setup may take some time to upgrade the database. Configuration Manager Setup 04/02/2014 3:01:17 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: SiteCode for the specified database is CS1 Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Starting database upgrade test using CM_CS1 database, on the SITE.DB.CA server. Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Testing database this SiteNumber: 0. Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Testing database setup type: 8, top level: 1. Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Site server of the Database is SITE.SERVER.CA Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Site code of the Database is CS1 Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Build number from the database is 5.00.7804.1000 Configuration Manager Setup 04/02/2014 3:01:22 PM 3080 (0x0C08)
INFO: Upgrading SQL Server database... Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: The database compatibility level for CM_CS1 is 110 Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: Set Database options: starting... Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA MASTER, Type: Secure Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: Database options: connected... Configuration Manager Setup 04/02/2014 3:01:33 PM 3080 (0x0C08)
INFO: Successfully set database to SINGLE_USER mode Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set database owner to sysadmin. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set TRUSTWORTHY ON Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully configured [clr enabled]. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set Recursive triggers to CM_CS1. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set checkpoint truncation. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Configuring SQL Server service broker... Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully enabled service broker. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set HONOR_BROKER_PRIORITY. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set CHANGE_TRACKING=ON. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set ALLOW_SNAPSHOT_ISOLATION ON. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set READ_COMMITTED_SNAPSHOT ON. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully configured Max text replication size. Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully set default settings Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Successfully enabled MULTI_USER Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:36 PM 3080 (0x0C08)
INFO: Set Database options: end. Configuration Manager Setup 04/02/2014 3:01:37 PM 3080 (0x0C08)
INFO: Database options set. Configuration Manager Setup 04/02/2014 3:01:37 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating SQL Server database roles and schemas. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_MP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_MCS. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_DMP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_siteprovider. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_siteserver. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_AMTSP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_AIUS. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_AITool. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_extract. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_WebPortal. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_EnrollSvr. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_DViewAccess. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_SUP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_CRP. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsschm_users. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_DmpConnector. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbrole_HMSUser. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbuser_ReadOnly. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbuser_ReadWrite. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Creating smsdbuser_ReportSchema. Configuration Manager Setup 04/02/2014 3:01:38 PM 3080 (0x0C08)
INFO: Beginning SQL Server script execution. Configuration Manager Setup 04/02/2014 3:01:51 PM 3080 (0x0C08)
INFO: Executing PreUpgrade Cleanup scripts. Configuration Manager Setup 04/02/2014 3:01:51 PM 3080 (0x0C08)
INFO: Executing DropForeignKeys Configuration Manager Setup 04/02/2014 3:02:13 PM 3080 (0x0C08)
INFO: SQL Connection succeeded. Connection: SITE.DB.CA CM_CS1, Type: Secure Configuration Manager Setup 04/02/2014 3:02:23 PM 3080 (0x0C08)
INFO: Executing DropAllCLRObjects Configuration Manager Setup 04/02/2014 3:02:23 PM 3080 (0x0C08)
DropAllCLRObjects Configuration Manager Setup 04/02/2014 3:02:23 PM 3080 (0x0C08)
INFO: Executing DropAllOjects for Service Portal Configuration Manager Setup 04/02/2014 3:02:38 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 start. Configuration Manager Setup 04/02/2014 3:02:38 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 end, success: 52, Failed: 0 Configuration Manager Setup 04/02/2014 3:02:43 PM 3080 (0x0C08)
INFO: Executing DropAllOjects Configuration Manager Setup 04/02/2014 3:02:43 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 start. Configuration Manager Setup 04/02/2014 3:02:43 PM 3080 (0x0C08)
INFO: Drop SqlObj: alertvariablechangeinitiatorservice Configuration Manager Setup 04/02/2014 3:03:25 PM 3080 (0x0C08)
INFO: Drop SqlObj: alertvariablechangetargetservice Configuration Manager Setup 04/02/2014 3:03:26 PM 3080 (0x0C08)
INFO: DROP MESSAGE TYPE: <declare @VarName nvarchar(128) ~declare @VarSql nvarchar(400) ~select @VarName = [name] from sys.service_message_types where lower([name]) = lower(N'alertvariablechangemessage') ~if @VarName IS NOT NULL ~begin ~   set
@VarSql = N'DROP MESSAGE TYPE ' + QUOTENAME(@VarName, N'[') ~   execute(@VarSql) ~end > Configuration Manager Setup 04/02/2014 3:03:26 PM 3080 (0x0C08)
INFO: DROP MESSAGE TYPE: <declare @VarName nvarchar(128) ~declare @VarSql nvarchar(400) ~select @VarName = [name] from sys.service_message_types where lower([name]) = lower(N'alertvariablechangeackmessage') ~if @VarName IS NOT NULL ~begin ~   set
@VarSql = N'DROP MESSAGE TYPE ' + QUOTENAME(@VarName, N'[') ~   execute(@VarSql) ~end > Configuration Manager Setup 04/02/2014 3:03:26 PM 3080 (0x0C08)
INFO: Drop SqlObjs Round: 0 end, success: 3049, Failed: 0 Configuration Manager Setup 04/02/2014 3:03:34 PM 3080 (0x0C08)
INFO: Executing UnBindXMLSchemas Configuration Manager Setup 04/02/2014 3:03:34 PM 3080 (0x0C08)
INFO: Dropping objects from csaObject Configuration Manager Setup 04/02/2014 3:03:35 PM 3080 (0x0C08)
INFO: Executing the preupgrade SQL Server scripts. Configuration Manager Setup 04/02/2014 3:03:37 PM 3080 (0x0C08)
INFO: Upgrade cleanup end Configuration Manager Setup 04/02/2014 3:03:56 PM 3080 (0x0C08)
INFO: Creating SQL Server tables for the Configuration Manager database... Configuration Manager Setup 04/02/2014 3:03:56 PM 3080 (0x0C08)
*** create table dbo.Add_Remove_Programs_64_DATA (MachineID int NOT NULL ,InstanceKey int NOT NULL ,RevisionID int NOT NULL ,AgentID int NULL ,TimeKey datetime NOT NULL ,rowversion timestamp NOT NULL ,ProdID00 nvarchar(255) NULL
,DisplayName00 nvarchar(255) NULL ,InstallDate00 nvarchar(255) NULL ,Publisher00 nvarchar(255) NULL ,Version00 nvarchar(255) NULL ) Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
*** [42S01][2714][Microsoft][SQL Server Native Client 11.0][SQL Server]There is already an object named 'Add_Remove_Programs_64_DATA' in the database. Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
ERROR: SQL Server error: [42S01][2714][Microsoft][SQL Server Native Client 11.0][SQL Server]There is already an object named 'Add_Remove_Programs_64_DATA' in the database. Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
CSqlSchema::CreateTable - error in CSql->Execute() create table dbo.Add_Remove_Programs_64_DATA (MachineID int NOT NULL ,InstanceKey int NOT NULL ,RevisionID int NOT NULL ,AgentID int NULL ,TimeKey datetime NOT NULL ,rowversion
timestamp NOT NULL ,ProdID00 nvarchar(255) NULL ,DisplayName00 nvarchar(255) NULL ,InstallDate00 nvarchar(255) NULL ,Publisher00 nvarchar(255) NULL ,Version00 nvarchar(255) NULL ) Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
ERROR: Failed to execute SQL Server script: Creating table Add_Remove_Programs_64_DATA Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
ERROR: SQL Server error: <> Configuration Manager Setup 04/02/2014 3:03:58 PM 3080 (0x0C08)
<02-04-2014 15:04:09> Failed to create process of SetupWpf.exe. 01/01/1601 12:00:00 AM 1993431915 (0x76D15B6B)
JAK

SCCM 2012 R2 upgrade: upgrade clients

Hi,
Please advise on client upgrades. After upgrading the server (Windows 2008 R2 & SCCM 2012 SP1) to R2, we need to upgrade the clients. Client push is not enabled and we do not want to enable it.
What is the correct way to go then? Right click on client and choose "client install" (that did not do the trick for me), creating a package with the upgrade "from definition" (that loaded the cpu for half an hour to 100 %).
http://anoopcnair.com/2013/02/19/how-to-automatically-upgrade-sccm-configmgr-2012-rtm-clients-to-sp1/
Please advise.
J.
Jan Hoedt

I would use the Automatic Client Upgrade feature to get the new client out there..
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/09/09/using-configuration-manager-automatic-client-upgrade-to-upgrade-to-the-latest-system-center-endpoint-protection-client.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2007 to SCCM 2012 CLIENT upgrade

Hi,
We have some Windows XP machines with a SCCM 2007 client, connected to a SCCM 2007 server. Meanwhile some client are already migrated to Windows 7 but still connected to SCCM 2007 (and their packages/collections).
Now we would like to:
-migrate the Windows 7 machines to SCCM 2012 and keep their packages (so no re-run of advertisements) run
-migrate the Windows XP machines by migrating the SCCM 2007 clients then advertise a task sequence (Windows 7) to it
Questions:
-should we push the sccm client from 2007 or from 2012 server to keep the membership of collections?
-if we have to push from 2007, please advise howto: use ccmsetup.exe, the msi (is this the way to go: http://blog.metasplo.it/2012/10/how-to-upgrade-sccm-2007-clients-to.html)?
Please advise.
J.
Jan Hoedt

It doesn't seem to be published on the site.
I'll paste it here. Could you advise?
I would like to test with a cmd, so I made an install.cmd which contains.
@echo on
Cscript ConfigMgrStartup.vbs /ConfigMgrStartup.xml
pause
Then I edited the configmgrstartup.xml:
*Commmented lab1 since I'm not sure what to put there, why put a machine name and why the forward slash?
I'd expect domain\administrator.
*Commented out hotfixes since we don't need it
Launched the cmd but nothing happens, no loggings either.
!-- <Option Name="LocalAdmin" >lab1/dadmin</Option> -->
   <Option Name="SiteCode" >LTF</Option>
   <Option Name="CacheSize">8120</Option>
   <Option Name="AgentVersion">5.00.7804.1000</Option>
   <Option Name="MinimumInterval">0</Option>
   <Option Name="ClientLocation">\\oursccmserver\SMS_PRD\Client</Option>
   <Option Name="MaxLogFile">2048</Option>
   <Option Name="ErrorLocation">\\dfs\ErrorLogs\Clientinstall</Option>
   
   <Option Name="Delay" >5</Option>
   <InstallProperty Name="FSP">oursccmserver.fqdn</InstallProperty>
   <InstallProperty Name="SMSMP">oursccmserver.fqdn</InstallProperty>
   <CCMSetupParameter Name="BITSPriority">HIGH</CCMSetupParameter>
   <CCMSetupParameter Name="noservice" />
   <ServiceCheck Name="BITS" State="Running" StartMode="Auto" Enforce="True" />
   <ServiceCheck Name="winmgmt" State="Running" StartMode="Auto" Enforce="True" />
   <ServiceCheck Name="wuauserv" State="Running" StartMode="Auto" Enforce="True" />
   <ServiceCheck Name="lanmanserver" State="Running" StartMode="Auto" Enforce="True" />
   <ServiceCheck Name="RpcSs" State="Running" StartMode="Auto" Enforce="True" />
   <RegistryValueCheck Key="HKLM\SOFTWARE\Microsoft\Ole" Value="EnableDCOM" Expected="Y" Enforce="True" Type="REG_SZ"/>
   <RegistryValueCheck Key="HKLM\SOFTWARE\Microsoft\Ole" Value="EnableRemoteConnect" Expected="Y" Enforce="False" Type="REG_SZ"/>
   <RegistryValueCheck Key="HKLM\SOFTWARE\Microsoft\Ole" Value="LegacyAuthenticationLevel" Expected="2" Enforce="False" Type="REG_DWORD"/>
   <RegistryValueCheck Key="HKLM\SOFTWARE\Microsoft\Ole" Value="LegacyImpersonationLevel" Expected="2" Enforce="False" Type="REG_DWORD"/>
</Startup>
Jan Hoedt

SCCM 2012 R2 Upgrade - Side by Side

Hi All,
I'm new to SCCM. I have a scenario where I suppose migrate (side by side) SCCM 2012 R2 from SCCM 2012 RTM and upgrade it client and remap with new setup.
Configuration Settings: 01 Primary Site with inbuild SQL, 2000 client and will be used only for software update.
Question: Kindly someone help me with the High level steps with reference document to proceed?

You can only migrate from R2 to R2 according to
http://technet.microsoft.com/en-us/library/gg699364.aspx
That document also covers the steps needed.
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 OS Upgrade

Dear all,
We have SCCM 2012 SP1 which runs on Win 2008 OS , we would like to upgrade to Win2012 , Can you please let me know the things which need to consider before and after upgrade.
Thanks,
Senthil

Upgrade of the Site Server Operating System
Configuration Manager supports an in-place upgrade of the operating system of the site server in the following situations:
In-place upgrade to a higher Windows Server service pack as long as the resulting service pack level remains supported by Configuration Manager.
In-place upgrade from Windows Server 2012 to Windows Server 2012 R2.
Configuration Manager does not support the following Windows Server upgrade scenarios.
Any version of Windows Server 2008 to any version of Windows Server 2008 R2 or later.
Any version of Windows Server 2008 to any version of Windows Server 2012 or later.
Any version of Windows Server 2008 R2 to any version of Windows Server 2012 or later.
When a direct operating system upgrade is not supported, perform one of the following procedures after you have installed the new operating system:
Install System Center 2012 Configuration Manager with the service pack level that you want, and configure the site according to your requirements.
Install System Center 2012 Configuration Manager with the service pack level that you want and perform a site recovery. This scenario requires you to have a site backup that was created by using the
Backup Site Server maintenance task on the original Configuration Manager site, and that you use the same installation settings for the new System Center 2012 Configuration Manager site.

[SCCM 2012 R2] Windows Update Agent do not scan correctly thus SCCM has bad reports

Hi All,
My colleagues reported that after manual download and installation of update Office 2010 SP2 ... SCCM still do not report as Installed:
https://support.microsoft.com/en-us/kb/2687455
KB2687455 update on SCCM is reported as:
Update ID: 9c5e43a3-3ae9-434d-b105-a9d7902d5f9f
Update Title: Service Pack 2 for Microsoft Office 2010 (KB2687455) 32-Bit Edition
Test Computer:
After investigation I found out that Windows Update Agent (verbose logging) is reporting that this update is really not installed: Agent Update {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F} is deployed for scan, and is installable. It will be reported
as installable.
Update KB2687455 is shown in Programs and Features/Installed Updates as installed on this computer.
Question:
This update is MSP (not standard update) so it cannot be queried by win32_quickfixengineering WMI class. How to query all installed updates on system (registry, API, ...)?
How WUA query ALL installed updates?
Thank you in advance.
Regards,

Hi,
You could check the version number. The version number of Office 2010 SP2 is greater than or equal to
14.0.7015.1000.
The script in the blog below could get List of installed Windows / office Updates.
http://www.blackforce.co.uk/2013/01/27/get-list-of-installed-windows-office-updates-command-line
The sample in the following article can be used to determine if a critical security update is installed on a computer. If the update isn't installed, the user can ensure that the update is downloaded and installed. The user can also ensure that
they are notified about the status of the installation.
https://msdn.microsoft.com/en-us/library/windows/desktop/aa387101(v=vs.85).aspx
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft
does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Sccm 2012 sp1 upgrade, new client install hangs

I just upgraded from 2012 to 2012 sp1. When i try the "Install Client" ccmsetup.exe appears to hang on the remote machine. Thoughts?

Thanks for helping me track down the issue. Now for the actual problem.
<![LOG[Checking compatibility of site version '5.00.7711.0000', expect newer than '5.00.7783.1000']LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="1" thread="1208" file="siteinfo.cpp:703">
<![LOG[Client version '5.00.7804.1000' is not compatible with the site 'LNK' version '5.00.7711.0000'.]LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="2" thread="1208" file="siteinfo.cpp:721">
<![LOG[Client version '5.00.7804.1000' is not compatible with the site 'LNK' version '5.00.7711.0000'. Fail the installation.]LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="3" thread="1208" file="ccmsetup.cpp:1439">
<![LOG[CcmSetup failed with error code 0x87d0029d]LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="1" thread="1044" file="ccmsetup.cpp:10544">
So after the upgrade process i "accidently" ran a reset this site from the install. Not sure if thats what is cuasing my issues but i wanted that to be known. Other then that i am not sure why my site is show as pre sp1 still.
My setup is just 1 primary box nothing complicated all self contained.
*EDIT*
If i go to Administration->Site COnfiguration->Sites->Properties on LNK
It shows Build number 7804
*EDIT*
After reading through this post
http://social.technet.microsoft.com/Forums/en-US/configmanagerdeployment/thread/77abdd5a-fdb8-4202-b092-ddce0dc05b7b/
I get a new error
<![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="httphelper.cpp:1972">
<![LOG[Received header '<Msg SchemaVersion="1.1">
<ID>{0568D04C-8345-4CD0-A502-76391B624A0A}</ID>
<SourceID>GUID:86F07109-3652-438D-811D-8C96A1EA8FBF</SourceID>
<SourceHost>SYSCEN0</SourceHost>
<TargetAddress>direct:COD-VMSCCMT:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<ReplyCapabilities><AllowRegistrationReset>direct:SYSCEN0:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>COD-VMSCCMT</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2013-05-21T12:57:17Z</SentTime><Body Type="ByteRange" Offset="0" Length="1252"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">SYSCEN0;SYSCEN0.abc.medforest.org;</Property><Property Name="MPSiteCode">LNK</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="httphelper.cpp:1724">
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="LNK" MasterSiteCode="LNK" SiteLocality="LOCAL" IISPreferedPort="" IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="LNK00002" FullPackageVersion="2" FullPackageHash="5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C" MinimumClientVersion="5.00.7804.1000" RandomizeMaxDays="1" ProgramEnabled="false" LastModifiedTime="30298897;380127488" SiteVersionMatch="true" SiteVersion="5.00.7804.1000" EnablePeerCache="true"/></ContentLocationReply>']LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="siteinfo.cpp:221">
<![LOG[Failed to get DP locations as the expected version from MP 'SYSCEN0.abc.medforest.org'. Error 0x87d00215]LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="2" thread="1312" file="ccmsetup.cpp:10926">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='101' will not be sent.]LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="1" thread="1312" file="ccmsetup.cpp:9428">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="ccmsetup.cpp:8498">

Sccm 2012 R2, upgrade, sms agent host,

Similar Messages

Maybe you are looking for