SCCM 2012 Recover "User State Recovery Key" after Deletion Policy has removed the key

I have a computer that was upgraded from Windows XP to 7 using SCCM 2012.  The user's info was captured and restored, but found out a month later that some Outlook Archives are corrupt. 
I had this happen before on a different user, but found out right away and was able to recover the User State Recovery Key and restore the files. 
I have looked under Assets and Compliance, User State Migration, but the computer is not listed anymore.
I have done a file restore of the USMT.MIG file from three weeks ago, but can not extract the users files without the User State Recovery Key.
I have looked through the SQL tables and have only found the StateEncryptDecryptKey in the StateMigration table which will not work. 
Environment:
Windows 2008 R2 SP1 SCCM 2012 Server
Windows 2008 R2 SP1 SQL 2012 Server
Any help would be appreciated.
Thanks,
Wendell

It worked! Thank you Jason!
I restored the server's Storage Folder from "State Migration Point" (USMT Folder) from the same date as the SQL database was restored from.  Shut the SCCM server down while doing the SQL restore.  Turned on the Server and was able
to pull out the User State Recovery Key. 
Then reverted back by shutting down the SCCM server and restoring SQL database back to previous backup taken before starting.
Only issue I'm getting now is that SMS_EN_ADSERVICE_MONITOR has a warning
8400 Enrollment Point AD Service Control failed to read and configure the registry keys necessary for this component.
With checking everything out to make sure no issues have arised. I looked through the log adctrl.log and found some more errors about Failed to create instance of ADService Managed Component. error = -2147024809
Any help would be appreciated.
Thanks,
Wendell

Similar Messages

  • SCCM 2012 R2 User State Migration Win XP to Win 8.1 does not migrate Domain User Files

    Hi @ all
    i'm trying migrate Win XP Sp3 to Win 8.1 using SCCM 2012 R2. So i followed the how to from the SCCM Team.
    https://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
    All things worked fine, but the user files from my test Domain user are not restored.
    Here some extracts of the loadstate log.
    2014-01-07 15:49:16, Info                  [0x000000] User SCCM\test.user maps to S-1-5-21-2486663232-1734351201-1738771205-1113
    2014-01-07 15:49:16, Info                  [0x000000] User TEST-COMPUTER\Administrator maps to TEST-COMPUTER\Administrator
    2014-01-07 15:49:16, Error                 [0x000000] The account TEST-COMPUTER\User is chosen for migration, but the target does not have account TEST-COMPUTER\User. See documentation
    on /lac, /lae, /ui, /ue and /uel options.
    2014-01-07 15:49:16, Info                  [0x000000] Failed.[gle=0x00000006]
    2014-01-07 15:49:16, Info                  [0x000000]   Unable to create a local account because /lac was not specified[gle=0x00000006]
    2014-01-07 15:49:16, Info                  [0x000000] Entering MigCloseCurrentStore method
    2014-01-07 15:49:16, Info                  [0x0801dc] Closing catalog file
    2014-01-07 15:49:16, Info                  [0x0801dd] Deleting catalog file at C:\Windows\Temp\tmpF6E7.tmp\Temp\tmp9F3.tmp
    2014-01-07 15:49:16, Info                  [0x000000] Leaving MigCloseCurrentStore method
    2014-01-07 15:49:16, Info                  [0x000000] USMT Completed at 2014/01/07:15:49:16.078[gle=0x00000057]
    The user sccm\test.user is my test user but, i cannot see any error in relation to that user.
    Has some some an idea?
    Thank you
    Adrian

    Hi,
    I found a similar article for your reference.
    http://blogs.technet.com/b/sudheesn/archive/2009/12/28/in-place-upgrade-from-windows-xp-to-windows-7.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to manually recover user state data saved to a State Migration Point

    Hi,
    In SCCM 2012, how would you recover the User State saved to the State Migration Point manually?
    In SCCM 2007 you could do what was outlined here:
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/159affd3-1726-4829-a0f4-0c875481fc11
    However this does not work for SCCM 2012 because the User State Recovery key so long that it cannot be used with a loadstate command (Loadstate commands cannot be longer than 256 characters)
    Previously you could also have just opened the User.mig file using Windows Easy Transfer and entered the User State Recovery key stored in SCCM - however in SCCM 2012 this does not work either!
    I really need to recover the contents for a user who got a new computer (old one stolen) and requires data from a previous user state capture on the State Migration Point.

    Hi,
    It seems something changed in SCCM 2012.
    I've got the same problem and after couple hours of research I found MS article that only helped me -
    http://technet.microsoft.com/en-us/library/hh824962.aspx
    In SCCM server I run this command:
    C:\Program Files (x86)\Windows Kits\8.0\Assessment and Deployment Kit\User State Migration Tool\amd64>usmtutils.exe /extract C:\tmp\_MIG\USMT.MIG C:\tmp\_MIG\Extract /decrypt /keyfile:C:\tmp\_MIG\Key.txt
    and received necessary data.

  • How to recover the recovery partition after delete all hard disk partitions

    hallo
    how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
    note that : I did not work recovery disc or usb to my laptop.
    I have need of your help.

    Satellite Pro C850-1FN (PSCBXE-01700EEN)
    Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
    If no recovery discs were created, you can obtain them from Toshiba.
       Toshiba Europe Backup Media Online Shop
    For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
    -Jerry

  • HT201328 I have recieved a locked phone from US. At& T confirmed tht the same could be unlocked and had suggested the procedure of 'back up and restotre to unlock the phone, which was done. After this when I removed the old  simcard, the iphone cannot be

    I have recieved a locked phone from US. At& T confirmed tht the same could be unlocked and had suggested the procedure of 'back up and restotre to unlock the phone, which was done. After this when I removed the old  simcard, the iphone cannot be activated

    When you connected to iTunes and restored, did you get the
    'Congratulations. Your iPhone is now unlocked' message?
    If not, first try again. Follow the procedure in the email
    AT&T sent you exactly - do not skip steps. If still no success,
    contact AT&T as the problem is on their end.
    Do you have a sim in the iPhone when trying to activate it?
    You must put a sim into the iPhone for activation to compllete.

  • OSD Request User State Storage fails after SCCM 2012 upgrade to R2

    After SCCM upgrade from SP1 to R2 OSD fails on Request User State Storage. Error:
    Task sequence: XXXXX has failed with the error code (0x00004005). For more information, contact your system administrator or helpdesk operator.
    In smsts.log:
    =================================
    <![LOG[Certificate is a self signed certificate. It will not be checked for revocation or expiration.]LOG]!><time="09:27:37.133-120" date="03-14-2014" component="OSDSMPClient" context="" type="0" thread="5984"
    file="smpclientutil.cpp:420">
    <![LOG[Successfuly retrieved public key and verified signature.]LOG]!><time="09:27:37.133-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:2604">
    <![LOG[Sending share info request message: <RequestStateStore><ClientID>GUID:BF0F737B-1834-4625-984C-5C9DE2391CFC</ClientID><Reserved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eserved2></RequestStateStore>]LOG]!><time="09:27:37.134-120"
    date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:2285">
    <![LOG[Requesting SMP Root share config information from http://server.int.domain.com:0]LOG]!><time="09:27:37.290-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984"
    file="smpclient.cpp:2348">
    <![LOG[Received 3963 byte response.]LOG]!><time="09:27:37.333-120" date="03-14-2014" component="OSDSMPClient" context="" type="0" thread="5984" file="smpclient.cpp:2363">
    <![LOG[Adding \\server.int.domain.com\SMPSTORED_39C7CA32$ to list ]LOG]!><time="09:27:37.367-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:2403">
    <![LOG[Failed to connect to "\\server.int.domain.com\SMPSTORED_39C7CA32$" (1203).]LOG]!><time="09:27:37.440-120" date="03-14-2014" component="OSDSMPClient" context="" type="2" thread="5984"
    file="tsconnection.cpp:340">
    <![LOG[Failed to connect to "\\server.int.domain.com\SMPSTORED_39C7CA32$" (1203).]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="2" thread="5984"
    file="tsconnection.cpp:340">
    <![LOG[Cannot connect to http://server.int.domain.com SMP root share]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="3" thread="5984" file="smpclient.cpp:1754">
    <![LOG[ClientRequestToSMP::DoRequest failed. error = (0x80004005).]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="3" thread="5984" file="smpclient.cpp:1882">
    <![LOG[Request to SMP 'http://server.int.domain.com' failed with error (Code 0x80004005). Trying next SMP.]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="2"
    thread="5984" file="smpclient.cpp:1590">
    <![LOG[Sleeping for 60 seconds before next attempt to locate an SMP.]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:1565">
    =======================
    IIS log:
    =======================
    172.20.0.xx CCM_POST /SMSSMP/.sms_smp op=KeyInfo 80 - 172.20.6.yy SMS+CCM+5.0+TS 200 0 0 2281 2
    172.20.0.xx CCM_POST /SMSSMP/.sms_smp op=RootShareInfo 80 - 172.20.6.yy SMS+CCM+5.0+TS 200 0 0 4088 29
    172.20.0.xx OPTIONS /SMPSTORED_39C7CA32$ - 80 - 172.20.6.yy Microsoft-WebDAV-MiniRedir/6.1.7601 200 0 0 206 19
    172.20.0.xx PROPFIND /SMPSTORED_39C7CA32$ - 80 - 172.20.6.yy Microsoft-WebDAV-MiniRedir/6.1.7601 405 0 0 1496 1
    172.20.0.xx PROPFIND /SMPSTORED_39C7CA32$ - 80 - 172.20.6.yy Microsoft-WebDAV-MiniRedir/6.1.7601 405 0 0 1496 1
    ======================
    Allow clients to connect anonymously enabled on DP
    On SMP file share permissions enabled for everyone
    Any suggestions where to look?

    Hi,
    Please try to access
    \\server.int.domain.com\SMPSTORED_39C7CA32$ using Network Access Account from the workstation you working on.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 - Automatic User Device affinity - Not Working

    Hi,
    I need to enable the Automatic User Device affinity.
    Have enabled following two group policy settings:
    Audit account logon events
    Audit logon events
    In client settings User and Device Affinity
    following is enabled:
    User device affinity threshold (120 minutes)
    User device affinity threshold (2 days)
    Automatically configure user device affinity from usage data – True
    However even after 2 days there is no user device relationship getting build.
    Is there anything more required to be done?
    Any logs or links to be referred for troubleshooting?
    Regards,
    Milind Dhuri.

    Hi,
    Please post this in SCCM 2012 forum.
    tx.

  • SCCM 2012 R2 MDT 2013 Install Features after OS Install

    I have a question in regards to installing Features on Windows Servers Post OS Install/OSD.
    I have MDT 2013 integrated with SCCM 2012 R2. I have created a MDT TS doing the following:
    Microsoft Deployment Custom Task Sequence (All other ones were for OSD)
    I removed all the steps in the TS except for the "Use Toolkit Package"
    Added Several MDT Sequence for Install Roles and Features, Selected SNMP for Server 2008, 2008 R2, 2008 R2 Core, 2012, 2012 R2.
    Removed the boot image since it is not needed.
    Deployed to my Test Collection.
    I see the TS Running on the test servers but when I check Server Manager the SNMP is still not installed even though software center shows installed on the TS.
    Am I missing something here? Any help would greatly be appreciated. Thanks!!

    Disregard my previous post. I was tinkering with the Compliance Settings and corrected my ignorance.
    Here were my steps:
    Create Configuration Item
    General: Put the name, Set Type to Window, filter set to "Server"
    Supported Platforms: All servers 2008 and newer
    Settings: Name,
    Discovery Script -PowerShell
    $FeatureName = "SNMP-Service"
    If (Get-WindowsFeature | Where {$_.State -eq "Enabled" -and $_.FeatureName -eq $FeatureName})
        $Compliance = "Compliant"
    Else {
        $Compliance = "NonCompliant"
    Return $Compliance
    Remediation Script - PowerShell
    $FeatureName = "SNMP-Service"
    Import-Module ServerManager
    Install-WindowsFeature -Name $FeatureName -IncludeAllSubFeature
    Compliance Rule: Name, Rule Type = Value, Must Comply Equals Compliant, Checked Run remediation script when not compliant, set Reports to Information
    Created Config Baseline, Assigned Config Item for SNMP Service and then deployed to my Servers.

  • SCCM 2012 - Wrong user in application catalog

    Hi everybody,
    i´ve got some strange things with my SCCM 2012 Server.
    The Software deployment works nearly perfect but there is a different user logged in the application catalog then logged into Windows.
    Is there any chance to change the logged in user in the application catalog? Or anybody knows where SCCM takes the information to set the account?
    Thanks and Regards

    Internet Explorer usually uses the credentials of the logged-in user to connect to the Application Catalog website. Any chance that there are pre-existing connection to the server hosting the app catalog?
    Torsten Meringer | http://www.mssccmfaq.de
    I´ve made a hole IE10 reset and cleared the browser cache. There are no other existing connections to the Server.
    Is there any chance to manually set the user used for the apllication catalog? Maybe in the UserProfile?

  • How to configure SCCM 2012 discover user group only?

    Hi,
    I'm wondering if there is a way to discover user group only (ignore computer group) in SCCM 2012?
    Jason

    Hi,
    Also note that by default, only security groups are discovered. However, you can discover the membership of distribution
    groups when you select the checkbox for the option Discover the membership of distribution groups on
    the Option tab
    in the Active Directory Group Discovery Properties dialog box.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Deploying the SCCM 2012 Client to WES 7 devices that are locked down with the FBWF using 2007 task sequence via WEDM.

    I'm wondering how people are migrating their embedded devices that are using the FBWF. I've done some googling and it seems like most people are just re-imaging the devices and after migrating a single device i see why. Its not a pretty process. This will
    be a long description but ultimately my question stems more from trying to find a better way to execute the device migration from 2007 to 2012.
    Some back ground on my situation might be in order here. I'm in the process of wrapping up our 2007 to 2012 migration. We have a 2007 infrastructure that was a central server with 2 primaries and 286 secondary site servers. I've consolidated that to a single
    2012 primary site server that hosts all the main roles. There are 2 more servers in the data centers both operating solely as push distribution points I'll refer to them as 2012 01 02 and 03. I'm over half way through the migration and so far haven't needed
    to offload any site roles. There are almost 10,000 clients now reporting to the 2012 site server and almost a 100 field servers pulling content from 2012 02 as their source dp as pull dp is the only way forward for this many devices. I've read the horror stories
    of trying spin up 200 plus push dps. We are running PKI. I'm at the point now where i need to start migrating the Windows Embedded Seven Standard clients that have the 2007 sccm client on them with WEDM for write filter handling.
    What i'm wondering is if anyone has any pointers for me regarding migrating the WES 7 devices. My plan that i've come up with is to somehow script the process using a 2007 WEDM Task Sequence to try and migrate them over to 2012. Things are complicated as
    I need to somehow script the install, the policy checkin, hardware inventory, software inventory, and validate the SCEP client installs before I reboot the device one last time to enable the FBWF. How I handled the SCCM 2007 client install on these devices
    when they were provisioned was to just create a batch file that would sleep for ten minutes then check to see if the inventoryagent.log file had been created yet. I realize now that is inefficient as i can kick off the inventory using a WMI method once the
    client has installed. Also I need to make sure the machine gets its first policy as that is how it creates the communication using PKI through that first policy transfer and that also finalizes the client install. The biggest piece i'm uncertain about in this
    regard is the SCEP client.
    I had to change the SCEP client install from yes to no in the default client settings as we have some Mcaffee servers that can't have the SCEP client on them. I have incremental updates enabled on the collection that has the policy that installs the SCEP
    client but this will take an unknown amount of time unless i force the environment to update as the device starts in 2012 install, or if I could kick off the SCEP isntall... IDK. I'm also wondering if i should keep the device in the migration process until
    i validate it has its proper scep policy applied which I believe can be validated by a registry key somewhere.
    Once the 2012 client gets installed will that cause it to lose its place within the 2007 Task Sequence? Considering its going to take a minimum of 2 reboots I'd normally use the task sequence to handle its progression through the process.
    I'm also considering trying to use an Orchestrator runbook, as that would be a good way to keep track of the migration process as each device migrates. Especially since this might take several seperate scripts.
    I'm going to take a stab at scripting the migration process, but if anyone has any pointers that might make this a less complicated I'd really appreciate it as I've got about 3000 of these devices that need to be migrated over. The other things i've learned
    the hard way is any time you have something this complicated over the course of 3000 devices you will run into unknowns and the failure rate increases. I'm in the precarious position of having to not only build this process out but in some situations have
    it complete in the shortest amount of time possible as we have sites running 24x7. I know the end users behavior all to well and they will just keep hitting the power button sometimes even though their not supposed to so they can get their device functional
    again. In those situations i'd end up, if i'm lucky with a device that no longer has a healthy SCCM client in either environment and the write filter disabled.
    So like i said any pointers anyone could throw my way i'd really appreciate. I manually went through the migration process on a single device for proof of concept and ended up with almost 2 pages of pseudo code for my migration script/scripts.
    Thanks,
    -K.R.

    Hi,
    In R2 there are some new variables you can use to solve this,
    http://ccmexec.com/2014/12/smstsmplistrequesttimeout-value-in-milliseconds/
    In Sp1 though adding a step to sleep for 2-5 minuter after reboot and before the application install step is a common workaround.. a powershell command with "Start-Sleep
    -s 120" should do it. 
    /Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCCM 2012 CU3 / WSUS - Update files are being deleted

    We have been running this configuration since April of last year and haven't had any problems. 
    The problem is a majority of the window/security updates files in the WSUSContent folder are missing.  I have ran wsusutil /reset and it takes a day or so but it will successfully download the 80GB of missing files.  But after a few days they are
    once again missing.  We do run our EPP updates through WSUS and we have no problems with those.
    I have searched endlessly through the log files, I can see where it goes through and skips them due to being superseded. 
    Do not see any database or communication issues between SCCM and WSUS, per the wsyncmgr.log it sees the thousands of that are available from our WSUS server. 
    So, any suggestions as to what might be causing the update files to be deleted from the WSUSContent folder?
    We are running this on:
    Server 2012 / SCCM 2012 CU3 / WSUS for 2012

    So, just to make sure I understand.  Is that we should be deploying updates from the SCCM Configmgr? 
    If you want to use the integrate experience, then yes.
    but the problem is that a majority of updates are showing Downloaded = No when looking under All Software Updates
    You need to either manually initiate the download of updates or set up an Automatic Deployment Rule (ADR). Either will cause ConfigMgr to download the updates placing them into an update package (which in turn gets placed on a DP where the clients can access
    and download the updates).
    wsynclog shows the sync of the update catalog, i.e., the metadata, and not the actual update binaries.
    Jason | http://blog.configmgrftw.com

  • Jar file is not working after deleting all packages from the same directory

    hello
    i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
    Please tell me what may be the reason???
    thanks in advanced

    hello
    i have created a jar file named as server.jar in the same directory in which i have all the packages(for which i have created this jar file).This jar file was working correctly when i had all the packages in the same directory.But after deleting all the packages from the same working directory, this jar file is neither working nor giving any error message..
    Please tell me what may be the reason???
    thanks in advanced

  • After deleting enhanced view still the bsp application is showing in se80

    Hi,
    I enhanced one component then after some reason i deleted the enhanced view at that time it's asked do you want to delete bsp application i click on yes then after also still i showing in se 80 under my package it's showing.
    after deleting enhancement view and deleted enhancement component.
    after deleting these total still all the z classes are showing in sm24. if i enhance from starting on wards from enhancing component and enhancing view i need to new bsp application name because previous bsp application is still showing and some of the context class. after transporting in to quality server this component is showing there is context class which i redefine in the development and view is not defined in the run time repository. why it's showing these errors in quality server.
    my guess is in dev i deleted which are deleted still the classes and bsp application are there older one if provide new bsp classes also.
    what are important things we need to follow if delete the view enhancement and deleting the component enhancement. because if i transport after deleting with new bsp application name and with a previous existing class with a new request also it's not working quality server. because lot of classes are generating automatically in when we redefine the context class in development so these classes are not there in quality server.
    please guide me if delete any enhanced view and component why still bsp application and redefine z classes are showing in se80 and se24. because if enhance newly also and redefine also it's considering previous bsp application and previous redefine classes.
    what are precautions i need to take if i delete enhanced view and enhance component.please guide me.
    jemmi.

    Jemmi,
    You should follow the following SAP Note in deleting enhancements. There are a few steps to be done in SM34. If we just delete through the wizard we are bound to have these issues.
    SAP Note 1122248 - Consultation:Procedure when dealing w/framework enhancements
    Briefly, these are the steps to delete the enhancemnet-
    1) In SM34, view BSPWDVC_CMP_EXT. Select enhancement set and then select enhancement definition. You will see your component there.
    2) Select your component and in left side navigation click Controller Substitutes.
    3) A list of the enhanced views are displayed.
    4) Select the views and delete it. Before you delete make a note of the BSP application these views are attached to. Hopefully, you attached them in a Z BSP application
    5) Go to SE80. Select the Z BSP application and delete it.
    Go through the SAP Note to understand the process in more detail.

  • How to recover user accounts and email after clean (not upgrade) server reinstall

    I  have a OSX Mavericks Server 3.1.2 that has developed issues than only a clean install will resolve. I have a large number of user accounts and email data that needs to be reinstated after the the clean install and I am not sure if Migration from a backup is the best way to reover the  user data. Someone p[lease tell me that I dont have to recreate all the user accounts and restore the email directories manually! Any help would be greatly appreciated.

    Helloo,
    I know that it is not the same issue but you might try the steps below listed since it is the same error message and there seems to be a fault in the registery of XP
    http://support.microsoft.com/default.aspx?scid=kb;en-us;314060
    hope it helps
    Cheers

Maybe you are looking for