SCCM 2012 report/data for importing software metering rules..

Hi,
I have a customer who would like to start using software metering. The plan is to create the rules manually, since I guess it would be overkill and/or have an huge performance impact to enable it for all...? We might be talking about 100-300 applications.
To do it manually, a powershell script can be used for creating these based on a txt file containing the following information.
Productname, FileName, OrginalFileName, FileVersion
The customer has then asked for a report/csv file showing these information for all .exe files, so they can pick what they want to have metered. The data amount will for sure be huge and unmanageable.
Anyone has a good approach for this challenge? :-)
Thanks in advance.
Best regards
Thomas

The approach is to say NO, what they are asking for is huge in the range of 100,000 different exes, there is no way anyone will go the list. Instead, look at the build in report for count of installed software products and sort from largest count
to smallest. Then create SWM rules for those applications that have a cost and not everyone has. Aka why would you crate a SWM rule for WORD or EXCEL? But it does make sense to create a rule for Visio or AutoCAD.
Also why create a rule for two different version of Visio? Do you need it, why? Are you sure?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

SCCM 2012 Reporting Capabilities for Software Metering

Hi,
I've been requested by my supervisors to get some information on metered software and computer usage in a specific lab, but I am unsure if I can obtain all the information they requested with just using SCCM.
I've already set up metering rules for the programs they want information on, software metering is enabled on the clients, and all of the lab computers are in in Configmgr and have good clients on them. Here's the list of the requests:
Total number of lab users by day
Total hours logged into lab computers by day
Total hours logged into a specific metered program by day
Total hours running different internet browsers
Total unique users over the course of a certain period of time
I am a novice when it comes to reports in SCCM. Are there built in reports that can give this information or would I have to write my own custom reports, or is this level of detail not possible for SCCM to give?
Any advice would be appreciated.
Thanks!

The most requested information can be found in the obvious reports about
Software Metering (\Monitoring\Overview\Reporting\Reports\Software Metering).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to show a filter of the values in SCCM 2012 report?

I didn't see a forum for SCCM 2012 reporting, only SCCM 2007 Reporting, so I hope I am posting in the correct forum for this.
We upgraded to SCCM 2012 R2 and when running a report and entering values we can no longer type in a filter and then see a filtered list of values like in SCCM 2007.
Is there a solution for this? This was very useful especially in the Add/Remove report because many times we don't know exactly what to enter.
Below is a snapshot of what we did in SCCM 2007.

Garth, unfortunately, I don't. I was fair at SCCM 2007 reporting and modifying SQL statements, but it seems everything has changed with SCCM 2012 reporting. For the specific SCCM 2012 report I mentioned, "Computers with specific software
registered in Add Remove Programs", is there some code I could paste in somewhere to get it to operate like the SCCM 2007 report?
Are you using BIDS or Report Builder. (Keep in mind that I recommend BIDS over RP)
Here are the basic steps:
Review the SQL for the Prompt
Add a variable to the prompt
Import; refresh the SQL query within the dataset
Move that the new variable is BEFORE the existing variable
Enter in the Prompt text “Enter computer filer”
Test to make sure everything is nice
Upload the report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Report for Software registered in Add/Remove programs

Hi
Am looking to create an SCCM 2012 Report for Software registered in Add/Remove programs on windows 7 machines but dont have enough experience with report builder to do this.
Was hoping someone could help.

When i use the url i still only see the following categories
Administrative Security
Asset Intelligence
Client Push
Client Status
Compliance and Settings ManagementHave looked through them all and that one is not there
the only software ones are the following
Report Software 01A - Summary of installed software in a specific collectionThis report provides a summary of installed software ordered by the number of instances found from inventory.
Open Menu
Report Software 02A - Product families for a specific collectionThis report lists the product families and the count of software in the family for a specific collection.
Open Menu
Report Software 02B - Product categories for a specific product familyThis report lists the product categories in a specific product family and the count of software within the category. This report is linked to Software 02C - Software in a specific product
family and category.
Open Menu
Report Software 02C - Software in a specific product family and categoryThis report lists all software that is in the specified product family and category. This report is linked to Software 06B - Software by product name.
Open Menu
Report Software 02D - Computers with specific software installedThis report lists all computers with specific software installed. This report is linked to Software 02E - Installed software on a specific computer .
Open Menu
Report Software 02E - Installed software on a specific computerThis report lists all software installed on a specific computer.
Open Menu
Report Software 03A - Uncategorized softwareThis report lists the software that is either categorized as unknown or has no categorization.
Open Menu
Report Software 04A - Software configured to automatically run on computersDisplays a list of software configured to automatically run on computers.
Open Menu
Report Software 04B - Computers with specific software configured to automatically runDisplays all computers with specific software configured to automatically run.
Open Menu
Report Software 04C - Software configured to automatically run on a specific computerDisplays installed software configured to automatically run on a specific computer.
Open Menu
Report Software 05A - Browser Helper ObjectsThis report displays the Browser Helper Objects installed on computers in a specific collection.
Open Menu
Report Software 05B - Computers with a specific Browser Helper ObjectDisplays all of the computers with a specific Browser Helper Object.
Open Menu
Report Software 05C - Browser Helper Objects on a specific computerDisplays all Browser Helper Objects on the specific computer.
Open Menu
Report Software 06A - Search for installed softwareThis report provides a summary of installed software ordered by the number of instances based on search criteria for the product name, publisher, or version.
Open Menu
Report Software 06B - Software by product nameThis report provides a summary of installed software ordered by the number of instances based on selected Product Name.
Open Menu
Report Software 07A - Recently used executable programs by the count of computersThis report displays executable programs that have been used recently with a count of computers on which they have been used. The Software Metering client must be enabled for this
site to view this report.
Open Menu
Report Software 07B - Computers that recently used a specified executable programThis report displays the computers on which a specified executable program has recently been used when you enable the software metering client setting.
Open Menu
Report Software 07C - Recently used executable programs on a specified computerThis report displays executables that have been used recently on a specified computer when you enable the software metering client setting.
Open Menu
Report Software 08A - Recently used executable programs by the count of usersThis report displays executable programs that have been used recently with a count of users that have most recently used them when you enable the software metering client setting.
Open Menu
Report Software 08B - Users that recently used a specified executable programThis report displays the users that have most recently used a specified executable program when you enable the software metering client setting.
Open Menu
Report Software 08C - Recently used executable programs by a specified userThis report displays executable programs that have been used recently by a specified user when you enable the software metering client setting.
Open Menu
Report Software 09A - Infrequently used softwareThis report displays software titles that have not been used during a specified period of time. You can specify a value that will represent the number of days that have elapsed since the last use (e.g. if you
enter 90 days, you will see software that was not used in the past 90 days or more). You can also leave the Days not used field empty to see all software titles that were never used.
Open Menu
Report Software 09B - Computers with infrequently used software installedThis report displays computers which have software installed that has not been used for a specified period of time. The specified period of time is based on the value specified in the
'Software 09A - Infrequently used software' report.
Open Menu
Report Software 10A - Software titles with specific multiple custom labels definedThis report allows you to view software titles based on matching of all selected custom label criteria. Up to three custom labels can be selected to refine a software title search.
Open Menu
Report Software 10B - Computers with a specific custom-labeled software title installedThis report shows all computers in this collection, that have the specified custom-labeled software title installed.
Open Menu
Report Software 11A - Software titles with a specific custom label definedThis report allows you to view software titles based on matching of at least one of the selected custom label criteria.
Open Menu
Report Software 12A - Software titles without a custom labelThis report displays all software titles that do not have a custom label defined.
Open Menu
Report Software 14A - Search for software identification tag enabled softwareThis report provides the count of installed software with a software identification tag enabled.
Open Menu
Report Software 14B - Computers with specific software identification tag enabled software installedThis report lists all computers that have installed software with a specific software identification tag enabled.
Open Menu
Report Software 14C - Installed software identification tag enabled software on a specific computerThis report lists all installed software with a specific software identification tag enabled on a specific computer.
Open Menu

SCCM 2012 Report Problem

hi there,
we are using sccm 2012 with reports functionality on SQL 2008 R2 since 2 weeks now and everything is working fine, including reports.
most of the time i monitor the reports for "Status for a specified task sequence deployment on a specific computer"
but since yesterday i noticed that i cannot see any data here anymore - all task sequence deployments (which are working fine without errors) are not shown here anymore. not only i cannot see the current deployments of computers, i am also not able to see
data for deployments we had 2 weeks ago.
there is no error; sccm 2012 reports are just showing me no data (just for 1,2 computers instead of 20 or 30).
i rebooted sccm 2012 and also took a look at the component status; no error related to reporting system and reporting service is running.
anyone has a clue?

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Report equivalent of WSUS Report

In the old WSUS admin console you could set your display under All Computers (and other computer groups) to show patches that were Failed/Needed/Applied. I found this EXTREMELY useful. I can not find an equivalent within SCCM 2012. Does such a report exist
and if not, how do I go about making one? Software Updates A - Compliance, Compliance 1 is sort of close but it makes you click multiple times to get one report and you have to do it for each group. In WSUS all you had to do was click once or twice and I see
no option equivalent to All Computers.
Ben JohnsonWY

Here's the whole set:
http://social.technet.microsoft.com/Forums/en-US/78d145bb-81d2-45c7-9e23-d0980aaaf7ca/sccm-2012-r2-how-to-get-ipaddress-working-in-my-custom-report?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/d27bf671-91b4-45e9-bbc9-a3da9a4fd628/sccm-2012-compliance-7-customize-for-total-updates-needed?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/e865c492-9058-4141-9af7-26b280fbfe0b/sccm-2012-reporting-code-returns-same-value-for-total-number-of-required-updates-per-computer?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/1e5a2644-4eb7-4bed-92a3-a07d670bbb51/software-update-compliance-report-in-sccm-2012?forum=configmanagersecurity
http://social.technet.microsoft.com/Forums/en-US/3e3e0120-7e8c-4c9f-a1e0-4dc1fffe0618/sccm-2012-report-equivalent-of-wsus-report?forum=configmanagergeneral
Hope it helps
Ben JohnsonWY

SCCM 2012 report with BitLocker status

I am not an expert in SCCM 2012 Report Builder and i am trying to create a report with>
computername(laptop),drive letter, bitlocker status
I can't find the property to use in report builder to read the drive letter and bitlocker status. Is there someone who can help me out or had a rdl report file for me ?
PS. creating a query in SCCM 2012 is easy and works...but how to create a report out of it ??

SELECT dbo.v_R_System.Name0, dbo.v_GS_ENCRYPTABLE_VOLUME.DriveLetter0, dbo.v_GS_ENCRYPTABLE_VOLUME.ProtectionStatus0
FROM dbo.v_GS_ENCRYPTABLE_VOLUME INNER JOIN
dbo.v_R_System ON dbo.v_GS_ENCRYPTABLE_VOLUME.ResourceID = dbo.v_R_System.ResourceID
Please use the query above, you need to create your own data source of this Report. For more information, please ask at SQL forum, there is a dedicated SSRS forum for this kind of question.
Juke Chou
TechNet Community Support

SCCM 2012 report w/ selectable collection

I am trying to create a report with a selectable collection parameter. The original query I'm using is as follows (Stolen from
http://blogs.technet.com/b/infratalks/archive/2013/09/10/sccm-2012-reporting-get-system-serial-number-amp-create-custom-ssrs-report.aspx):
Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
From v_R_System SYS
left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
--Where sys.Name0 = @variable
order by sys.Name0
This works fine, but it gives me that information for EVERY machine in our infrastructure globally. I am only interested in getting this information from machines in certain collections and I want to be able to select the collection each time I run
the report. I found this article:
http://it.peikkoluola.net/2013/06/02/report-with-a-selectable-collection-parameter-sql/ and followed the steps, but cannot run the report successfully. I'm guessing it has something to do with needing to modify my query, but I am a newb with SQL and
have no clue what or where I should be tweaking. Just adding "WHERE(dbo.v_FullCollectionMembership.CollectionID
= @COLLID)" gives me a syntax error. Moving it above "Order by sys.name0" gives an error about not being bound to anything, which makes sense but as I mentioned, I don't know what to tweak. Help! Thanks.

Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
From v_R_System SYS
left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
join v_fullcollectionmembership fcm on fcm.resourceid=sys.resourceid
Where fcm.collectionid = @COLLID
order by sys.Name0
Try the above, note that @COLLID is a placeholder for a variable. It is presumed that you are creating this using Report Builder 3.0 (or better) or some other SQL tool to create reports for use on your SRS reporting point. If you happen
to be using Report Builder, once you save the above, under parameters you'd have a place for COLLID. Now, what you want is to be able to have that parameter be populated with your collection names, so that you can select from the list when the report
is run.
So... another DataSet, with a query like:
select collectionid, name
from v_collection
order by name
Then, back to your parameters, COLLID, available values, Get values from a query, and you'll want to use that dataset you just made, and Value field is collectionid, and Label field is Name.
If you want to test the top query in regular sql, don't use @collID. figure out the collectionid of a specific collection, and put in where fcm.collectionid='ABC00012'
Standardize. Simplify. Automate.

SCCM- software metering rules.

HI All,
Can some one share the information on how we can create software metering rule for Adobe in SCCM 2007?
Also, where can we find the correct file name or product name for the software to be metered?
Rgs,

Here are the Technet information and a step by step guide about software meetering:
http://technet.microsoft.com/en-us/library/bb633043.aspx
http://blogs.msdn.com/b/minfangl/archive/2011/04/29/step-by-step-on-how-to-use-software-metering.aspx

Using the tcode:S_ALR_87013611, no report data for the cost center

Hi,Friends.I need a help.
In the tcode FB60,i entered the following data and then posted the vendor inovice sucessfully.
data:
( Note: G/L acct:55020141 is also a primary cost element)
In the tcode:S_ALR_87013611,I entered the following data and executed.
but the result is:{Report contains no data. Check the selection log}.
data: { Controlling Area: C999, Fiscal Year: 2010, From Period:1, To Period:12,Plan Version:0,
        Or value(s):2001}
(Note: Cost center:2001 belongs to Controlling Area: C999)
please tell me how to do,so that using the tcode:S_ALR_87013611, I can see the report data for
the cost center 2001.
sincerely                      WenYao Ma
Edited by: wenyao ma on Mar 22, 2010 1:09 PM

thank you,friends.
I just solved it.
Solution:
1) Maintain Controlling Area
   path:spro>Controlling>Organization>Maintian Controlling Area>Maintain Controlling Area.   tcode:OKKP
In the {Activate components/control indicators}cost center should be 'component active'
2) Maintain Number Ranges for Controlling Documents
   path:spro>Controlling>Organization-->Maintain Number Ranges for Controlling Documents.   tcode:KANK
Element { COIN CO Through-postings from FI} should be assigned to one group.

Report data for 0SAPBLNCE-01 saved!!

hi
while i run one report the message that is displayed is :
Report data for 0SAPBLNCE-01 saved
where can i see that data..guesss problem in exporting the data!!
thx
Gunjan

Hi GUnjan,
What is the program you are running?
Is it a custom code?
What is the type of message that you are getting?
Ravi

Automatic creation software metering rules

hi
I have installed SCCM 2012 r2 with two servers .A site server and a database server .I enabled software metering on client settings and software and hard ware inventory .But I ve got a problem that sccm doesn't create software metering rules automatically
.I had already enabled Automatic create software metering rule on SMW properties . But no luck yet.
when I create a rule manually It works fine but Its not working automatically .

you have configured 2% of computers must use the disabled programs to activate automatically (Specify
the percentage of computers in the hierarchy that must use a program before a software metering rule is automatically created) .so pls check if any of the computers are using the disabled programs or not.Login to test computer and use the disabled
program and then check the status.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr
I have more than 500 clients with enabled software metering .Dont you think it is enough to create rules automatically .?

Software Metering Rule not working SCCM 2012

No usage data found to generate software metering report.
mean that the
machines ran meteriing, but there isnt nothing on the machiine that matches the
meter rule so it says
No usage data found to generate software metering
report, int the SWMTRReportGen.log?
Please help me in this issue.
Regards,
Faisal Alvi

a common mistake is to configure a specific language and/or version that is not present on all machines.
Kent Agerlund | My blogs: blog.coretech.dk and
SCUG.DK | Twitter: @Agerlund | Linkedin:
Kent Agerlund | Author:
Mastering System Center 2012 R2 The Fundamentals

SCCM 2012 Report that shows the users with specific software installed

Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin Davis

Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

SCCM 2012 Reporting Code Returns Same Value For Total Number Of Required Updates Per Computer

I'm trying to make a custom report in SCCM 2012 R2 with SQL 2012 since Microsoft took out the ability to list the number of updates needed per computer. This was in WSUS reporting but is not in SCCM reporting. I've made a custom report for this but can't
quite get it to work. The report runs but the same value for total number of updates needed shows up for every computer. I took a query from one report and am trying to get it to run inside the select statement from another report. Here is the code as it is
right now:
declare @CI_ID int; select @CI_ID=CI_ID from fn_rbac_ConfigurationItems(@UserSIDs) where CIType_ID=9 and CI_UniqueID=@AuthListID
          declare @StateID int
          select @StateID=StateID from fn_rbac_StateNames(@UserSIDs) sn where sn.StateName=@StateName and TopicType=300
          declare @RequiredUpdateCount int
          select @RequiredUpdateCount=Count(v_StateNames.Statename) from
v_StateNames,
v_Update_ComplianceStatusAll
Inner Join v_R_System On (v_R_System.ResourceID = v_Update_ComplianceStatusAll.ResourceID)
Inner Join v_UpdateInfo On (v_UpdateInfo.CI_ID = v_Update_ComplianceStatusAll.CI_ID)
where
v_StateNames.TopicType = 500 and
v_StateNames.StateID = v_Update_ComplianceStatusAll.Status and
v_StateNames.Statename = 'Update is required'
Group By v_R_System.Name0
          select
            ccm.ResourceID,
            rs.Name0+isnull('.'+rs.Resource_Domain_or_Workgr0, '') as MachineName,
            rs.User_Domain0+'\'+User_Name0 as LastLoggedOnUser,
            asite.SMS_Assigned_Sites0 as AssignedSite,
            rs.Client_Version0 as ClientVersion,
@RequiredUpdateCount as RequiredUpdates
          from fn_rbac_ClientCollectionMembers(@UserSIDs) ccm
          join fn_rbac_Update_ComplianceStatusAll(@UserSIDs) cs on cs.CI_ID=@CI_ID and cs.ResourceID=ccm.ResourceID
            and (@StateID=0 and cs.Status=0 or @StateID=1 and cs.Status in (1,3) or @StateID=2 and cs.Status=2)
          join fn_rbac_R_System(@UserSIDs) rs on rs.ResourceID = ccm.ResourceID
          left join fn_rbac_RA_System_SMSAssignedSites(@UserSIDs) asite on asite.ResourceID = ccm.ResourceID
          where ccm.CollectionID=@CollID
          order by MachineName
Ben JohnsonWY

There's plenty wrong with it. It gives you no idea of how many patches each box needs. Then you have to click on each computer, click the sort arrow by the "required" column, and count the number needed. When you have hundreds of computers to work on this
is a big deal as it's very time consuming. What's great about the view in WSUS that had this is that it listed this for you and you could sort the required column. So if have most computers needing 2 patches, you can go find the one that needs 40 and 150 (to
over exaggerate) and put the time on them needed to see why they're so far behind. The WSUS format was quick, easy, and informative. SCCM makes getting this info a royal PITA which is why I'm (and many others) so royally peeved at MicroShaft for removing this
functionality, but that's what we've all come to expect from MicroShaft--just like when then took the nice colorful themes out of Office 2010 and replaced them in Office 2013 with just white, gray, and a darker gray. That's super boring and actually hurts
my eyes.
Ben JohnsonWY

SCCM 2012 report/data for importing software metering rules..

Similar Messages

Maybe you are looking for