SCCM 2012 report for all versions on MS lync installed

Hello,
I have installed Microsoft Lync 2010 and Lync 2013 on computers in my company and I have different versions
like 32 and 64 bits, 365 etc I want to make query in SCCM 2012 to tell me the total number of Microsoft Lync clients Installed on win 8 machines in my company, is there a best way to do this I need your advice..
I have tried various built in reports and not been successful so far.
Thanks in Advance

There's a thread already explaining this :
http://social.technet.microsoft.com/Forums/en-US/f16f1ee8-206c-42a1-af0e-0363c51b840c/how-to-know-total-of-microsoft-lync-installed-on-computers-in-sccm-2012?forum=configmanagergeneral
Benoit Lecours | Blog: System Center Dudes

Similar Messages

  • SCCM 2012 Report for Software registered in Add/Remove programs

    Hi
    Am looking to create an SCCM 2012 Report for Software registered in Add/Remove programs on windows 7 machines but dont have enough experience with report builder to do this.
    Was hoping someone could help.

    When i use the url i still only see the following categories
    Administrative Security
    Asset Intelligence
    Client Push
    Client Status
    Compliance and Settings ManagementHave looked through them all and that one is not there
    the only software ones are the following
    Report Software 01A - Summary of installed software in a specific collectionThis report provides a summary of installed software ordered by the number of instances found from inventory.
     Open Menu
    Report Software 02A - Product families for a specific collectionThis report lists the product families and the count of software in the family for a specific collection.
     Open Menu
    Report Software 02B - Product categories for a specific product familyThis report lists the product categories in a specific product family and the count of software within the category. This report is linked to Software 02C - Software in a specific product
    family and category.
     Open Menu
    Report Software 02C - Software in a specific product family and categoryThis report lists all software that is in the specified product family and category. This report is linked to Software 06B - Software by product name.
     Open Menu
    Report Software 02D - Computers with specific software installedThis report lists all computers with specific software installed. This report is linked to Software 02E - Installed software on a specific computer .
     Open Menu
    Report Software 02E - Installed software on a specific computerThis report lists all software installed on a specific computer.
     Open Menu
    Report Software 03A - Uncategorized softwareThis report lists the software that is either categorized as unknown or has no categorization.
     Open Menu
    Report Software 04A - Software configured to automatically run on computersDisplays a list of software configured to automatically run on computers.
     Open Menu
    Report Software 04B - Computers with specific software configured to automatically runDisplays all computers with specific software configured to automatically run.
     Open Menu
    Report Software 04C - Software configured to automatically run on a specific computerDisplays installed software configured to automatically run on a specific computer.
     Open Menu
    Report Software 05A - Browser Helper ObjectsThis report displays the Browser Helper Objects installed on computers in a specific collection.
     Open Menu
    Report Software 05B - Computers with a specific Browser Helper ObjectDisplays all of the computers with a specific Browser Helper Object.
     Open Menu
    Report Software 05C - Browser Helper Objects on a specific computerDisplays all Browser Helper Objects on the specific computer.
     Open Menu
    Report Software 06A - Search for installed softwareThis report provides a summary of installed software ordered by the number of instances based on search criteria for the product name, publisher, or version.
     Open Menu
    Report Software 06B - Software by product nameThis report provides a summary of installed software ordered by the number of instances based on selected Product Name.
     Open Menu
    Report Software 07A - Recently used executable programs by the count of computersThis report displays executable programs that have been used recently with a count of computers on which they have been used. The Software Metering client must be enabled for this
    site to view this report.
     Open Menu
    Report Software 07B - Computers that recently used a specified executable programThis report displays the computers on which a specified executable program has recently been used when you enable the software metering client setting.
     Open Menu
    Report Software 07C - Recently used executable programs on a specified computerThis report displays executables that have been used recently on a specified computer when you enable the software metering client setting.
     Open Menu
    Report Software 08A - Recently used executable programs by the count of usersThis report displays executable programs that have been used recently with a count of users that have most recently used them when you enable the software metering client setting.
     Open Menu
    Report Software 08B - Users that recently used a specified executable programThis report displays the users that have most recently used a specified executable program when you enable the software metering client setting.
     Open Menu
    Report Software 08C - Recently used executable programs by a specified userThis report displays executable programs that have been used recently by a specified user when you enable the software metering client setting.
     Open Menu
    Report Software 09A - Infrequently used softwareThis report displays software titles that have not been used during a specified period of time. You can specify a value that will represent the number of days that have elapsed since the last use (e.g. if you
    enter 90 days, you will see software that was not used in the past 90 days or more). You can also leave the Days not used field empty to see all software titles that were never used.
     Open Menu
    Report Software 09B - Computers with infrequently used software installedThis report displays computers which have software installed that has not been used for a specified period of time. The specified period of time is based on the value specified in the
    'Software 09A - Infrequently used software' report.
     Open Menu
    Report Software 10A - Software titles with specific multiple custom labels definedThis report allows you to view software titles based on matching of all selected custom label criteria. Up to three custom labels can be selected to refine a software title search.
     Open Menu
    Report Software 10B - Computers with a specific custom-labeled software title installedThis report shows all computers in this collection, that have the specified custom-labeled software title installed.
     Open Menu
    Report Software 11A - Software titles with a specific custom label definedThis report allows you to view software titles based on matching of at least one of the selected custom label criteria.
     Open Menu
    Report Software 12A - Software titles without a custom labelThis report displays all software titles that do not have a custom label defined.
     Open Menu
    Report Software 14A - Search for software identification tag enabled softwareThis report provides the count of installed software with a software identification tag enabled.
     Open Menu
    Report Software 14B - Computers with specific software identification tag enabled software installedThis report lists all computers that have installed software with a specific software identification tag enabled.
     Open Menu
    Report Software 14C - Installed software identification tag enabled software on a specific computerThis report lists all installed software with a specific software identification tag enabled on a specific computer.
     Open Menu

  • SCCM 2012: report for inventory of different hardware types?

    Hi,
    Is there a default report which shows how much of each model (vendor, type, f.e. 24 Dell Lenovo, 80 Dell ...) we have in our company?
    J.
    Jan Hoedt

    Hi Jan
    I have used this SQL Query when I am doing projects to get an overview of models by manufactor.
    select
    GSCS.Manufacturer0 as [Manufacturer],
    GSCS.Model0 as [Model],
    count(*) as [Count]
    from v_R_System RS
    left join v_GS_COMPUTER_SYSTEM GSCS on RS.ResourceID = GSCS.ResourceID
    Group by GSCS.Model0, GSCS.Manufacturer0
    Order by GSCS.Model0
    It is not a report in itself, but If you create a new empty report in ConfigMgr 2012 and open it with Report builder, you can use this query to built a very basic "Count Hardware Models by Manufactor".
    But I think it will give you the information you are looking for.

  • Need to make collection Query statement by sccm 2012 sp1 for Count of Licenses by License Status

    I want to make collection Query statement by sccm 2012 sp1 for all windows activated and all non-activated windows.
    Ahmed Sherif

    Have a look at the Software Licensing Product attribute classes when creating a Query - remember to choose
    System Ressource when creating the Query. You would have to enable this class to be collected during Hardware Inventory. Go to
    Client Settings -> Hardware Inventory ->
    Set Classes -> Select Software Licensing Product.
    This Class is part of the Asset Intelligence classes so you could enable it from there as well.
    Another way to accomplish is to use Compliance Settings to get this information.
    Create a Configuration item that query the Win32_WindowsProductActivation WMI Class, if you are using XP and the
    SoftwareLicensingProduct class for later os´s
    Add this Configuration Item to a Baseline ad deploy it to your Collections as needed.
    When the Baseline has been evaluated you can use this information to create query
    Machines reported as compliant is actived and machines reported as Non-Compliant is not activated.
    You can read about the Win32_WindowsProductActivation WMI Class here:
    http://msdn.microsoft.com/en-us/library/aa394520(v=vs.85).aspx
    and the SoftwareLicensingProduct here:
    http://msdn.microsoft.com/en-us/library/cc534596(v=vs.85).aspx

  • Pull out Report for all configured Collection veriables in SCCM 20007

    Hi All,
    I have tried many ways but failed to pull out a report on collection veraiables.
    It would be great, if someone could suggest how to pull out a report for all collection veriables which are configured.
    Thanks
    Regards, Dan

    Hi,
    Check if this link helps :
    http://it.peikkoluola.net/2013/09/30/display-a-sccm-collection-variable-and-its-value/
    ~ Räjeésh M | Blog:
    ScorpITs | Please remember to 'Mark as Answer' or 'Vote as Helpful' on the post that helps. It helps others reading the thread and recognizes useful contributions.

  • SCCM 2012 Report that shows the users with specific software installed

    Hi,
    Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
    1. Adobe(all versions)
    2. Photoshop(all versions)
    3. MS Project(all versions)
    4. MS Vision(all versions)
    Regards, Lorin Davis

    Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

  • SCCM 2012 Report Problem

    hi there,
    we are using sccm 2012 with reports functionality on SQL 2008 R2 since 2 weeks now and everything is working fine, including reports.
    most of the time i monitor the reports for "Status for a specified task sequence deployment on a specific computer"
    but since yesterday i noticed that i cannot see any data here anymore - all task sequence deployments (which are working fine without errors) are not shown here anymore. not only i cannot see the current deployments of computers, i am also not able to see
    data for deployments we had 2 weeks ago.
    there is no error; sccm 2012 reports are just showing me no data (just for 1,2 computers instead of 20 or 30).
    i rebooted sccm 2012 and also took a look at the component status; no error related to reporting system and reporting service is running.
    anyone has a clue?

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 Report equivalent of WSUS Report

    In the old WSUS admin console you could set your display under All Computers (and other computer groups) to show patches that were Failed/Needed/Applied. I found this EXTREMELY useful. I can not find an equivalent within SCCM 2012. Does such a report exist
    and if not, how do I go about making one? Software Updates A - Compliance, Compliance 1 is sort of close but it makes you click multiple times to get one report and you have to do it for each group. In WSUS all you had to do was click once or twice and I see
    no option equivalent to All Computers.
    Ben JohnsonWY

    Here's the whole set:
    http://social.technet.microsoft.com/Forums/en-US/78d145bb-81d2-45c7-9e23-d0980aaaf7ca/sccm-2012-r2-how-to-get-ipaddress-working-in-my-custom-report?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/d27bf671-91b4-45e9-bbc9-a3da9a4fd628/sccm-2012-compliance-7-customize-for-total-updates-needed?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/e865c492-9058-4141-9af7-26b280fbfe0b/sccm-2012-reporting-code-returns-same-value-for-total-number-of-required-updates-per-computer?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/1e5a2644-4eb7-4bed-92a3-a07d670bbb51/software-update-compliance-report-in-sccm-2012?forum=configmanagersecurity
    http://social.technet.microsoft.com/Forums/en-US/3e3e0120-7e8c-4c9f-a1e0-4dc1fffe0618/sccm-2012-report-equivalent-of-wsus-report?forum=configmanagergeneral
    Hope it helps
    Ben JohnsonWY

  • How to show a filter of the values in SCCM 2012 report?

    I didn't see a forum for SCCM 2012 reporting, only SCCM 2007 Reporting, so I hope I am posting in the correct forum for this.
    We upgraded to SCCM 2012 R2 and when running a report and entering values we can no longer type in a filter and then see a filtered list of values like in SCCM 2007.
    Is there a solution for this?  This was very useful especially in the Add/Remove report because many times we don't know exactly what to enter. 
    Below is a snapshot of what we did in SCCM 2007.

    Garth, unfortunately, I don't.   I was fair at SCCM 2007 reporting and modifying SQL statements, but it seems everything has changed with SCCM 2012 reporting.  For the specific SCCM 2012 report I mentioned,  "Computers with specific software
    registered in Add Remove Programs", is there some code I could paste in somewhere to get it to operate like the SCCM 2007 report?
    Are you using BIDS or Report Builder. (Keep in mind that I recommend BIDS over RP)
    Here are the basic steps:
    Review the SQL for the Prompt
    Add a variable to the prompt
    Import; refresh the SQL query within the dataset
    Move that the new variable is BEFORE the existing variable
    Enter in the Prompt text “Enter computer filer”
    Test to make sure everything is nice
    Upload the report.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Crystal Reports for Eclipse Version 2 - XML, XSD Report. Need hep !!!

    Dear all,
    I'm using Crystal Reports for Eclipse Version 2
    I have looked for "Programmatically Create Reports off of XML or Web Services Data Sources", then i found some ways to do this.
    But all the time, we have to use both XSD and XML files for Report Data Sources.
    My question is:
    1. Can we just add XSD file to report to define or update the report data definition only (no report data) ?
    2. Can we just add XML file to report to update report data only (do not change report definition) ?
    Anyone who have solved it, please give me an example.
    Thanks in advanced.
    Huy Nguyen

    Moved to Java forum

  • SCCM 2012 report w/ selectable collection

    I am trying to create a report with a selectable collection parameter.  The original query I'm using is as follows (Stolen from
    http://blogs.technet.com/b/infratalks/archive/2013/09/10/sccm-2012-reporting-get-system-serial-number-amp-create-custom-ssrs-report.aspx):
    Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
    From v_R_System SYS
      left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
      left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
      left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
      left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
      --Where sys.Name0 = @variable
      order by sys.Name0
    This works fine, but it gives me that information for EVERY machine in our infrastructure globally.  I am only interested in getting this information from machines in certain collections and I want to be able to select the collection each time I run
    the report.  I found this article:
    http://it.peikkoluola.net/2013/06/02/report-with-a-selectable-collection-parameter-sql/ and followed the steps, but cannot run the report successfully.  I'm guessing it has something to do with needing to modify my query, but I am a newb with SQL and
    have no clue what or where I should be tweaking.  Just adding "WHERE(dbo.v_FullCollectionMembership.CollectionID
    = @COLLID)" gives me a syntax error.  Moving it above "Order by sys.name0" gives an error about not being bound to anything, which makes sense but as I mentioned, I don't know what to tweak.  Help!  Thanks.

    Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
    From v_R_System SYS
      left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
      left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
      left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
      left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
      join v_fullcollectionmembership fcm on fcm.resourceid=sys.resourceid
      Where fcm.collectionid = @COLLID
      order by sys.Name0
    Try the above, note that @COLLID is a placeholder for a variable.  It is presumed that you are creating this using Report Builder 3.0 (or better) or some other SQL tool to create reports for use on your SRS reporting point.  If you happen
    to be using Report Builder, once you save the above, under parameters you'd have a place for COLLID.  Now, what you want is to be able to have that parameter be populated with your collection names, so that you can select from the list when the report
    is run.
    So... another DataSet, with a query like:
    select collectionid, name
    from v_collection
    order by name
    Then, back to your parameters, COLLID, available values, Get values from a query, and you'll want to use that dataset you just made, and Value field is collectionid, and Label field is Name.
    If you want to test the top query in regular sql, don't use @collID.  figure out the collectionid of a specific collection, and put in where fcm.collectionid='ABC00012'
    Standardize. Simplify. Automate.

  • Crystal Reports for Eclipse Version 2 - Feedback?

    Hello All!
    The new [Crystal Reports for Eclipse Version 2|https://www.sdn.sap.com/irj/boc/crystalreports-java] has been out for a couple of weeks now, so I thought it'll be good opportunity to get your initial impressions of the new version.
    What do you think of the new embedded designer?
    What do you think of the new Crystal Reports Java SDK?
    What do you think of the new Embedded Designer Extension Points SDK?
    What do you think of the new features - export features, report creation/modification API, etc?
    Please do reply to this forum post with your views!
    Sincerely,
    Ted Ueda

    Hi Clark,
    Great timing as the packages just became generally available:
    CR4E Runtime Package
    crjava-runtime_12.2.202.zip
    http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/crjava-runtime_12.2.202.zip
    CR4E Manual Install Package
    cr4e_2.0.1.zip
    http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e_2.0.1.zip
    CR4E All-In-One Package
    cr4e-all-in-one-win_2.0.1.zip
    http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e-all-in-one-win_2.0.1.zip
    CR4E Language Packs
    cr4e.nls1_2.0.1.zip
    http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls1_2.0.1.zip
    cr4e.nls2_2.0.1.zip
    http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls2_2.0.1.zip

  • SCCM 2012 report with BitLocker status

    I am not an expert in SCCM 2012 Report Builder and i am trying to create a report with>
    computername(laptop),drive letter, bitlocker status
    I can't find the property to use in report builder to read the drive letter and bitlocker status. Is there someone who can help me out or had a rdl report file for me ?
    PS. creating a query in SCCM 2012 is easy and works...but how to create a report out of it ??

    SELECT dbo.v_R_System.Name0, dbo.v_GS_ENCRYPTABLE_VOLUME.DriveLetter0, dbo.v_GS_ENCRYPTABLE_VOLUME.ProtectionStatus0
    FROM dbo.v_GS_ENCRYPTABLE_VOLUME INNER JOIN
    dbo.v_R_System ON dbo.v_GS_ENCRYPTABLE_VOLUME.ResourceID = dbo.v_R_System.ResourceID
    Please use the query above, you need to create your own data source of this Report. For more information, please ask at SQL forum, there is a dedicated SSRS forum for this kind of question.
    Juke Chou
    TechNet Community Support

  • Sales document report for all open documents

    hi i need the code for sales document report for all open documents is sd
    ...      can anyone help me out.
                                     thanks in advance

    Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
    If you want the Open sales order qty in output and its not displayed, do the following.
    Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
    You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
    For both you'll need an object registration in OSS.
    Hope this helps.
    Thanks,
    Balaji

  • Need to run the report for All Values when Null is passed in parameter

    Hi All,
    In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
    Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
    IMP : My Database is SQL Server
    where
    (table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
    Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
    I also tried simply
    table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
    Any suggestions on how can I handle this? Any help would be highly appreciated.
    Thanks,
    Ronny

    thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
    also please share the SR number, so i can also check the same.
    can there be any other work around to this?
    thanks,
    ronny

Maybe you are looking for