SCCM 2012 Report Problem

hi there,
we are using sccm 2012 with reports functionality on SQL 2008 R2 since 2 weeks now and everything is working fine, including reports.
most of the time i monitor the reports for "Status for a specified task sequence deployment on a specific computer"
but since yesterday i noticed that i cannot see any data here anymore - all task sequence deployments (which are working fine without errors) are not shown here anymore. not only i cannot see the current deployments of computers, i am also not able to see
data for deployments we had 2 weeks ago.
there is no error; sccm 2012 reports are just showing me no data (just for 1,2 computers instead of 20 or 30).
i rebooted sccm 2012 and also took a look at the component status; no error related to reporting system and reporting service is running.
anyone has a clue?

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

How to show a filter of the values in SCCM 2012 report?

I didn't see a forum for SCCM 2012 reporting, only SCCM 2007 Reporting, so I hope I am posting in the correct forum for this.
We upgraded to SCCM 2012 R2 and when running a report and entering values we can no longer type in a filter and then see a filtered list of values like in SCCM 2007.
Is there a solution for this? This was very useful especially in the Add/Remove report because many times we don't know exactly what to enter.
Below is a snapshot of what we did in SCCM 2007.

Garth, unfortunately, I don't. I was fair at SCCM 2007 reporting and modifying SQL statements, but it seems everything has changed with SCCM 2012 reporting. For the specific SCCM 2012 report I mentioned, "Computers with specific software
registered in Add Remove Programs", is there some code I could paste in somewhere to get it to operate like the SCCM 2007 report?
Are you using BIDS or Report Builder. (Keep in mind that I recommend BIDS over RP)
Here are the basic steps:
Review the SQL for the Prompt
Add a variable to the prompt
Import; refresh the SQL query within the dataset
Move that the new variable is BEFORE the existing variable
Enter in the Prompt text “Enter computer filer”
Test to make sure everything is nice
Upload the report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 report w/ selectable collection

I am trying to create a report with a selectable collection parameter. The original query I'm using is as follows (Stolen from
http://blogs.technet.com/b/infratalks/archive/2013/09/10/sccm-2012-reporting-get-system-serial-number-amp-create-custom-ssrs-report.aspx):
Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
From v_R_System SYS
left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
--Where sys.Name0 = @variable
order by sys.Name0
This works fine, but it gives me that information for EVERY machine in our infrastructure globally. I am only interested in getting this information from machines in certain collections and I want to be able to select the collection each time I run
the report. I found this article:
http://it.peikkoluola.net/2013/06/02/report-with-a-selectable-collection-parameter-sql/ and followed the steps, but cannot run the report successfully. I'm guessing it has something to do with needing to modify my query, but I am a newb with SQL and
have no clue what or where I should be tweaking. Just adding "WHERE(dbo.v_FullCollectionMembership.CollectionID
= @COLLID)" gives me a syntax error. Moving it above "Order by sys.name0" gives an error about not being bound to anything, which makes sense but as I mentioned, I don't know what to tweak. Help! Thanks.

Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
From v_R_System SYS
left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
join v_fullcollectionmembership fcm on fcm.resourceid=sys.resourceid
Where fcm.collectionid = @COLLID
order by sys.Name0
Try the above, note that @COLLID is a placeholder for a variable. It is presumed that you are creating this using Report Builder 3.0 (or better) or some other SQL tool to create reports for use on your SRS reporting point. If you happen
to be using Report Builder, once you save the above, under parameters you'd have a place for COLLID. Now, what you want is to be able to have that parameter be populated with your collection names, so that you can select from the list when the report
is run.
So... another DataSet, with a query like:
select collectionid, name
from v_collection
order by name
Then, back to your parameters, COLLID, available values, Get values from a query, and you'll want to use that dataset you just made, and Value field is collectionid, and Label field is Name.
If you want to test the top query in regular sql, don't use @collID. figure out the collectionid of a specific collection, and put in where fcm.collectionid='ABC00012'
Standardize. Simplify. Automate.

SCCM 2012 Report equivalent of WSUS Report

In the old WSUS admin console you could set your display under All Computers (and other computer groups) to show patches that were Failed/Needed/Applied. I found this EXTREMELY useful. I can not find an equivalent within SCCM 2012. Does such a report exist
and if not, how do I go about making one? Software Updates A - Compliance, Compliance 1 is sort of close but it makes you click multiple times to get one report and you have to do it for each group. In WSUS all you had to do was click once or twice and I see
no option equivalent to All Computers.
Ben JohnsonWY

Here's the whole set:
http://social.technet.microsoft.com/Forums/en-US/78d145bb-81d2-45c7-9e23-d0980aaaf7ca/sccm-2012-r2-how-to-get-ipaddress-working-in-my-custom-report?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/d27bf671-91b4-45e9-bbc9-a3da9a4fd628/sccm-2012-compliance-7-customize-for-total-updates-needed?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/e865c492-9058-4141-9af7-26b280fbfe0b/sccm-2012-reporting-code-returns-same-value-for-total-number-of-required-updates-per-computer?forum=configmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/1e5a2644-4eb7-4bed-92a3-a07d670bbb51/software-update-compliance-report-in-sccm-2012?forum=configmanagersecurity
http://social.technet.microsoft.com/Forums/en-US/3e3e0120-7e8c-4c9f-a1e0-4dc1fffe0618/sccm-2012-report-equivalent-of-wsus-report?forum=configmanagergeneral
Hope it helps
Ben JohnsonWY

SCCM 2012 Report for Software registered in Add/Remove programs

Hi
Am looking to create an SCCM 2012 Report for Software registered in Add/Remove programs on windows 7 machines but dont have enough experience with report builder to do this.
Was hoping someone could help.

When i use the url i still only see the following categories
Administrative Security
Asset Intelligence
Client Push
Client Status
Compliance and Settings ManagementHave looked through them all and that one is not there
the only software ones are the following
Report Software 01A - Summary of installed software in a specific collectionThis report provides a summary of installed software ordered by the number of instances found from inventory.
Open Menu
Report Software 02A - Product families for a specific collectionThis report lists the product families and the count of software in the family for a specific collection.
Open Menu
Report Software 02B - Product categories for a specific product familyThis report lists the product categories in a specific product family and the count of software within the category. This report is linked to Software 02C - Software in a specific product
family and category.
Open Menu
Report Software 02C - Software in a specific product family and categoryThis report lists all software that is in the specified product family and category. This report is linked to Software 06B - Software by product name.
Open Menu
Report Software 02D - Computers with specific software installedThis report lists all computers with specific software installed. This report is linked to Software 02E - Installed software on a specific computer .
Open Menu
Report Software 02E - Installed software on a specific computerThis report lists all software installed on a specific computer.
Open Menu
Report Software 03A - Uncategorized softwareThis report lists the software that is either categorized as unknown or has no categorization.
Open Menu
Report Software 04A - Software configured to automatically run on computersDisplays a list of software configured to automatically run on computers.
Open Menu
Report Software 04B - Computers with specific software configured to automatically runDisplays all computers with specific software configured to automatically run.
Open Menu
Report Software 04C - Software configured to automatically run on a specific computerDisplays installed software configured to automatically run on a specific computer.
Open Menu
Report Software 05A - Browser Helper ObjectsThis report displays the Browser Helper Objects installed on computers in a specific collection.
Open Menu
Report Software 05B - Computers with a specific Browser Helper ObjectDisplays all of the computers with a specific Browser Helper Object.
Open Menu
Report Software 05C - Browser Helper Objects on a specific computerDisplays all Browser Helper Objects on the specific computer.
Open Menu
Report Software 06A - Search for installed softwareThis report provides a summary of installed software ordered by the number of instances based on search criteria for the product name, publisher, or version.
Open Menu
Report Software 06B - Software by product nameThis report provides a summary of installed software ordered by the number of instances based on selected Product Name.
Open Menu
Report Software 07A - Recently used executable programs by the count of computersThis report displays executable programs that have been used recently with a count of computers on which they have been used. The Software Metering client must be enabled for this
site to view this report.
Open Menu
Report Software 07B - Computers that recently used a specified executable programThis report displays the computers on which a specified executable program has recently been used when you enable the software metering client setting.
Open Menu
Report Software 07C - Recently used executable programs on a specified computerThis report displays executables that have been used recently on a specified computer when you enable the software metering client setting.
Open Menu
Report Software 08A - Recently used executable programs by the count of usersThis report displays executable programs that have been used recently with a count of users that have most recently used them when you enable the software metering client setting.
Open Menu
Report Software 08B - Users that recently used a specified executable programThis report displays the users that have most recently used a specified executable program when you enable the software metering client setting.
Open Menu
Report Software 08C - Recently used executable programs by a specified userThis report displays executable programs that have been used recently by a specified user when you enable the software metering client setting.
Open Menu
Report Software 09A - Infrequently used softwareThis report displays software titles that have not been used during a specified period of time. You can specify a value that will represent the number of days that have elapsed since the last use (e.g. if you
enter 90 days, you will see software that was not used in the past 90 days or more). You can also leave the Days not used field empty to see all software titles that were never used.
Open Menu
Report Software 09B - Computers with infrequently used software installedThis report displays computers which have software installed that has not been used for a specified period of time. The specified period of time is based on the value specified in the
'Software 09A - Infrequently used software' report.
Open Menu
Report Software 10A - Software titles with specific multiple custom labels definedThis report allows you to view software titles based on matching of all selected custom label criteria. Up to three custom labels can be selected to refine a software title search.
Open Menu
Report Software 10B - Computers with a specific custom-labeled software title installedThis report shows all computers in this collection, that have the specified custom-labeled software title installed.
Open Menu
Report Software 11A - Software titles with a specific custom label definedThis report allows you to view software titles based on matching of at least one of the selected custom label criteria.
Open Menu
Report Software 12A - Software titles without a custom labelThis report displays all software titles that do not have a custom label defined.
Open Menu
Report Software 14A - Search for software identification tag enabled softwareThis report provides the count of installed software with a software identification tag enabled.
Open Menu
Report Software 14B - Computers with specific software identification tag enabled software installedThis report lists all computers that have installed software with a specific software identification tag enabled.
Open Menu
Report Software 14C - Installed software identification tag enabled software on a specific computerThis report lists all installed software with a specific software identification tag enabled on a specific computer.
Open Menu

SCCM 2012 report with BitLocker status

I am not an expert in SCCM 2012 Report Builder and i am trying to create a report with>
computername(laptop),drive letter, bitlocker status
I can't find the property to use in report builder to read the drive letter and bitlocker status. Is there someone who can help me out or had a rdl report file for me ?
PS. creating a query in SCCM 2012 is easy and works...but how to create a report out of it ??

SELECT dbo.v_R_System.Name0, dbo.v_GS_ENCRYPTABLE_VOLUME.DriveLetter0, dbo.v_GS_ENCRYPTABLE_VOLUME.ProtectionStatus0
FROM dbo.v_GS_ENCRYPTABLE_VOLUME INNER JOIN
dbo.v_R_System ON dbo.v_GS_ENCRYPTABLE_VOLUME.ResourceID = dbo.v_R_System.ResourceID
Please use the query above, you need to create your own data source of this Report. For more information, please ask at SQL forum, there is a dedicated SSRS forum for this kind of question.
Juke Chou
TechNet Community Support

SCCM 2012 Reporting point server instance blank

I have installed SCCM 2012 With remote SQL database server successfully, at the time of Reporting service point role installation, its verified the SCCm database successfully but SQL server service instance is blank, what would be the reason....
Below my SCCM architecture:
1. Created one Database in Remote server SQL server is in failover cluster active passive mode
2. Configured Reporting services in active mode.
3. at the time of reporting point role installed failover cluster database name given and its successfully verified with SCCM_123 database.
4. on the instance name showing blank.
Please help me if anyone facing this type of problem.
Thanks in advance.
Rishi!!
Regards, Rishi

It is not totally intuitive when installing the Reporting Point role with a cluster. When installing a Failover Cluster, SSRS can only get put on one node or on its own box, as it uses NLB for scale-out not FoC. SSRS is also not configured by
default if you use it with a clustered SQL instance, so you have to open SSRS Configuration Tool and make sure the ReportServerDB is created, and that the URLs can be browsed. Once that is done, then try adding it in CfgMgr:
In CfgMgr, In the Administration workspace, expand Site Configuration, and then click
Servers and Site System Roles.
Select the node that has SSRS installed on it (not the Failover Cluster virtual computer account). If SSRS is on its own box, first you have to go to
New site system and add the SSRS box.
Then, on the Home tab, in the Server group, click
Add Site System Role. The Add Site System Roles Wizard opens. Choose Reporting Point, and after verifying the connection to the CfgMgr DB, the instance name should populate.
http://technet.microsoft.com/en-us/library/gg712698#BKMK_InstallReportingServicesPoint
http://social.technet.microsoft.com/Forums/en-HK/configmanagerdeployment/thread/390a6ea8-8a24-47d0-b6ad-2e1063bbc72d

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

Sccm 2012 reporting services server instance blank

Hi guys,
Can anyone provide me tips to install reporting service point on SCCM 2012 server.
P.S: SRS instance configured in SQL server 2008 R2 SP2 and it can accessible (http://<SQLserver>/Reports/) in SCCM 2012 server
Please help me!
Thanks,

If you don't have DNS entry for your Report Service Point (SQL server), the instance field can be blank too.
Can you expand on this as I have never heard of this issue before.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Reports not visible

Hi All,
I am unable to view Reports in the SCCM CM 2012 console and the URL.
I have installed the Reporting service in DB server and later also ran the Reporting service configuration on DB server.
After that I am able to browse to the URL but do not see any default reports.
I have followed http://www.windows-noob.com/forums/index.php?/topic/4550-using-sccm-2012-rc-in-a-lab-part-11-adding-the-reporting-services-point-role/
Please suggest

Hi,
This is what I am getting in the log SRSRP
Any Suggestions
Timed Out... SMS_SRS_REPORTING_POINT
4/7/2013 7:30:43 AM 4012 (0x0FAC)
Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
4012 (0x0FAC)
The request failed with HTTP status 401: Unauthorized.
SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
4012 (0x0FAC)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
4/7/2013 7:30:43 AM 4012 (0x0FAC)
Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
4012 (0x0FAC)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
4/7/2013 7:30:43 AM 4012 (0x0FAC)
Timed Out... SMS_SRS_REPORTING_POINT
4/7/2013 7:31:43 AM 4012 (0x0FAC)
Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
4012 (0x0FAC)
The request failed with HTTP status 401: Unauthorized.
SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
4012 (0x0FAC)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
4/7/2013 7:31:43 AM 4012 (0x0FAC)
Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
4012 (0x0FAC)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
4/7/2013 7:31:43 AM 4012 (0x0FAC)
Timed Out... SMS_SRS_REPORTING_POINT
4/7/2013 7:32:43 AM 4012 (0x0FAC)
Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
4012 (0x0FAC)
The request failed with HTTP status 401: Unauthorized.
SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
4012 (0x0FAC)
(!) SRS not detected as running SMS_SRS_REPORTING_POINT
4/7/2013 7:32:43 AM 4012 (0x0FAC)
Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
4012 (0x0FAC)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
4/7/2013 7:32:43 AM 4012 (0x0FAC)
Murali Krishna V.S

SCCM 2012 - Reporting Instance

Hi Experts,
I have
Server 1 - SCCM 2012 SP1 - Windows server 2012
Server 2 - SQL site database - Windows server 2012/SQL server 2012
Server 3 - SQL reporting server - Windows server 2012/SQL server 2012
When I try configure reporting services role on Server 1 - SCCM 2012 SP1,
reporting server instance (Server 3 - SQL reporting server) is not detected automatically but
Server 2 - SQL site database is detected
Is there any configuration am I missing between Server 2 -
SQL site database - Windows server 2012/SQL server 2012 and Server 3 - SQL reporting server - Windows server 2012/SQL server 2012
Regards, Pratap

1. The installation and computer account of SCCM primary site server has local admin - OS level and sysadmin access on the Site database.
2. The installation and computer account of SCCM primary site server has local admin - OS level and sysadmin access on the reporting database level. Do I need to add primary site server computer account as a local admin in reporting server database.
Still I have an issue that reporting site role wizard finds an empty instances.
Regards, Pratap

SCCM 2012 Reporting Only

Hello,
I'm looking for a way to only allow some users to use the reporting function of SCCM 2012. So far it seems as I grant permissions they get access to other parts of SCCM as well. Is there a way to configure their account to only view and run reports as need?
If so, could you please explain the process? Thanks!
Pat
Pat

I'm having some issues. I wanted to take screen shots but it won't allow me to paste on the forum. I'm a full administrator of SCCM. When I view my different reporting options I have 58 category of reports which there are more reports inside each category.
I followed the directions from the links provided but when my user goes to view the reports they do not see as much as I do. I don't know the exact amount of reports he can view but I think it's about 11. I'm not sure how to allow the rest of the reports to
be visible. I went down each security setting and if it had the option to "Run Report" and made sure it said "Yes". Any help is appreciated.
Pat

SCCM 2012 Reporting Code Returns Same Value For Total Number Of Required Updates Per Computer

I'm trying to make a custom report in SCCM 2012 R2 with SQL 2012 since Microsoft took out the ability to list the number of updates needed per computer. This was in WSUS reporting but is not in SCCM reporting. I've made a custom report for this but can't
quite get it to work. The report runs but the same value for total number of updates needed shows up for every computer. I took a query from one report and am trying to get it to run inside the select statement from another report. Here is the code as it is
right now:
declare @CI_ID int; select @CI_ID=CI_ID from fn_rbac_ConfigurationItems(@UserSIDs) where CIType_ID=9 and CI_UniqueID=@AuthListID
          declare @StateID int
          select @StateID=StateID from fn_rbac_StateNames(@UserSIDs) sn where sn.StateName=@StateName and TopicType=300
          declare @RequiredUpdateCount int
          select @RequiredUpdateCount=Count(v_StateNames.Statename) from
v_StateNames,
v_Update_ComplianceStatusAll
Inner Join v_R_System On (v_R_System.ResourceID = v_Update_ComplianceStatusAll.ResourceID)
Inner Join v_UpdateInfo On (v_UpdateInfo.CI_ID = v_Update_ComplianceStatusAll.CI_ID)
where
v_StateNames.TopicType = 500 and
v_StateNames.StateID = v_Update_ComplianceStatusAll.Status and
v_StateNames.Statename = 'Update is required'
Group By v_R_System.Name0
          select
            ccm.ResourceID,
            rs.Name0+isnull('.'+rs.Resource_Domain_or_Workgr0, '') as MachineName,
            rs.User_Domain0+'\'+User_Name0 as LastLoggedOnUser,
            asite.SMS_Assigned_Sites0 as AssignedSite,
            rs.Client_Version0 as ClientVersion,
@RequiredUpdateCount as RequiredUpdates
          from fn_rbac_ClientCollectionMembers(@UserSIDs) ccm
          join fn_rbac_Update_ComplianceStatusAll(@UserSIDs) cs on cs.CI_ID=@CI_ID and cs.ResourceID=ccm.ResourceID
            and (@StateID=0 and cs.Status=0 or @StateID=1 and cs.Status in (1,3) or @StateID=2 and cs.Status=2)
          join fn_rbac_R_System(@UserSIDs) rs on rs.ResourceID = ccm.ResourceID
          left join fn_rbac_RA_System_SMSAssignedSites(@UserSIDs) asite on asite.ResourceID = ccm.ResourceID
          where ccm.CollectionID=@CollID
          order by MachineName
Ben JohnsonWY

There's plenty wrong with it. It gives you no idea of how many patches each box needs. Then you have to click on each computer, click the sort arrow by the "required" column, and count the number needed. When you have hundreds of computers to work on this
is a big deal as it's very time consuming. What's great about the view in WSUS that had this is that it listed this for you and you could sort the required column. So if have most computers needing 2 patches, you can go find the one that needs 40 and 150 (to
over exaggerate) and put the time on them needed to see why they're so far behind. The WSUS format was quick, easy, and informative. SCCM makes getting this info a royal PITA which is why I'm (and many others) so royally peeved at MicroShaft for removing this
functionality, but that's what we've all come to expect from MicroShaft--just like when then took the nice colorful themes out of Office 2010 and replaced them in Office 2013 with just white, gray, and a darker gray. That's super boring and actually hurts
my eyes.
Ben JohnsonWY

SCCM 2012 Reporting Services Website

Can someone point me to a how-to for configuring the Reporting Services website? The URL for our 2007 server is http://<server name>/SMSReporting_<site code>, but I can't figure out how to access the reporting website for SCCM 2012.

By default http://servername/reports
Justin Chalfant | http://patchmypc.net | Please remember to mark as helpful/answer if this helped you

GDI Error - Charts not visible in sccm 2012 reports

I'm trying to run some default out of box reports for my sccm 2012 environment and finding that the raw data in table format is being provided but if there's any charts that should be included in the report they're not showing up. In the SSRS logs I see
the error below:
reportrendering!ReportServer_0-245!7e88!04/30/2015-11:09:07:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: , Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: A generic error occurred
in GDI+. ---> System.Runtime.InteropServices.ExternalException: A generic error occurred in GDI+.
In researching this I found similar issues out there where Hotfix-KB2823372 resolved the issue but this now looks to only be available for Windows8 as I tried to download the Hotfix and run on my server to only receive a message advising it's not applicable.
Please advise if you've seen this error before and what you've done to resolve it.
Jason

What operating system are you using? That hotfix should do the trick for Windows Server 2012, see also:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8b47f28e-c6d5-497e-85db-d89a74fb27cd/a-generic-error-occured-in-gdi-error-ssrs-2012-sp1-on-windoes-server-2012?forum=sqlreportingservices
For Windows Server 2008 R2, see:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/50c071db-b4fc-4a2e-a9f4-e10e833c97d2/report-not-rendering-charts-in-pdf-a-generic-error-occurred-in-gdi?forum=sqlreportingservices
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 Report Problem

Similar Messages

Maybe you are looking for