SCCM 2012 Reporting point server instance blank

I have installed SCCM 2012 With remote SQL database server successfully, at the time of Reporting service point role installation, its verified the SCCm database successfully but SQL server service instance is blank, what would be the reason....
Below my SCCM architecture:
1. Created one Database in Remote server SQL server is in failover cluster active passive mode
2. Configured Reporting services in active mode.
3. at the time of reporting point role installed failover cluster database name given and its successfully verified with SCCM_123 database.
4. on the instance name showing blank.
Please help me if anyone facing this type of problem.
Thanks in advance.
Rishi!!
Regards, Rishi

It is not totally intuitive when installing the Reporting Point role with a cluster.  When installing a Failover Cluster, SSRS can only get put on one node or on its own box, as it uses NLB for scale-out not FoC.  SSRS is also not configured by
default if you use it with a clustered SQL instance, so you have to open SSRS Configuration Tool and make sure the ReportServerDB is created, and that the URLs can be browsed.  Once that is done, then try adding it in CfgMgr:
In CfgMgr, In the Administration workspace, expand Site Configuration, and then click
Servers and Site System Roles.
Select the node that has SSRS installed on it (not the Failover Cluster virtual computer account).  If SSRS is on its own box, first you have to go to
New site system and add the SSRS box.
Then, on the Home tab, in the Server group, click
Add Site System Role. The Add Site System Roles Wizard opens.  Choose Reporting Point, and after verifying the connection to the CfgMgr DB, the instance name should populate.
http://technet.microsoft.com/en-us/library/gg712698#BKMK_InstallReportingServicesPoint
http://social.technet.microsoft.com/Forums/en-HK/configmanagerdeployment/thread/390a6ea8-8a24-47d0-b6ad-2e1063bbc72d

Similar Messages

  • Sccm 2012 reporting services server instance blank

    Hi guys,
    Can anyone provide me tips to install reporting service point on SCCM 2012 server.
    P.S: SRS instance configured in SQL server 2008 R2 SP2 and it can accessible (http://<SQLserver>/Reports/) in SCCM 2012 server
    Please help me!
    Thanks,

    If you don't have DNS entry for your Report Service Point (SQL server), the instance field can be blank too.
    Can you expand on this as I have never heard of this issue before.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 Distribution Point server in a workgroup as well as the clients

    HI, 
    It is possible to have a distribution point set up by SCCM 2012 R2 which resides in a workgroup to manage workgroup users.
    Basically, SCCM 2012 R2 is setup within a domain and a forest, The clients in the workgroup resides in a DMZ. The server in the DMZ is also within the workgroup. 
    For some reasons, at this time, it is not possible to add the server to the Active Directory to push it the distribution point role and therefore managing thoses clients within the workgroup. 
    Is there a way to set up the distribution point role to a server in a workgroup?
    Thank you
    E

    https://technet.microsoft.com/en-us/library/gg682077.aspx?f=255&MSPPError=-2147217396#BKMK_SupConfigWorkgroups
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM 2012 - Reporting Instance

    Hi Experts,
    I have
    Server 1 - SCCM 2012 SP1 - Windows server 2012
    Server 2 - SQL site database - Windows server 2012/SQL server 2012
    Server 3 - SQL reporting server - Windows server 2012/SQL server 2012
    When I try configure reporting services role on Server 1 - SCCM 2012 SP1,
    reporting server instance (Server 3 - SQL reporting server) is not detected automatically but
    Server 2 - SQL site database is detected
    Is there any configuration am I missing between Server 2 -
    SQL site database - Windows server 2012/SQL server 2012 and Server 3 - SQL reporting server - Windows server 2012/SQL server 2012
    Regards, Pratap

    1. The installation and computer account of SCCM primary site server has local admin - OS level and sysadmin access on the Site database.
    2. The installation and computer account of SCCM primary site server has local admin - OS level and sysadmin access on the reporting database level. Do I need to add primary site server computer account as a local admin in reporting server database.
    Still I have an issue that reporting site role wizard finds an empty instances.
    Regards, Pratap

  • Procedure performing a "Retry Secondary Site" Operation in SCCM 2012 R2 Secondary Server

    Dear Brother,
    My SCCM 2012 R2 Secondary Site Server, unfortunately crashed and required to be restored, doing this I end up performing a "Retry Secondary Site Operation.
    One by one I am clearing out the errors but there are few remaining errors on the prerequisite checks:
    1.[Failed]:The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    Actions Done: SQL Related Services use Logon As Domain Account "Microsoft-Domain\BillAdmin" , but still the above message still appears in the logs.
    Actions Done: None
    2.[Failed]:The collation of the site database does not match the collation of the parent site's database.  All sites in a hierarchy must use the same database collation.
    3.[Failed]:The site server might be unable to publish to Active Directory. The computer account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have
    manually verified these permissions. For more information about your options to configure required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    Actions Done: None, as this machine is previously a working Secondary site for 1 Year already. So I do not suspect anything from the current related configuration.
    4.[Failed]: Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Action Taken:  Domain Account "Microsoft-Domain\BillAdmin" has a
    Sysadmin roles and actually all the check boxes are chosen to acquire all SQL account roles" 
    5. [Failed]:Prerequisite checks complete with failure - check ConfigMgrPrereq.log
    in the root of the primary site server system drive.
    6[Failed]:Unable to complete secondary site server installation - check ConfigMgrSetup.log in the root of the secondary site server system drive.
    ConfigMgrPrereq.log-Start
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> ******* Start Prerequisite checking. *******
    ?<12-27-2014 23:39:35> ********************************************
    ?<12-27-2014 23:39:35> Commandline :
    "E:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    ?<12-27-2014 23:39:35> Check Type: Secondary site
     Site Server: SecondarySite2.microsoft.com,
     SQL Server: SecondarySite2.microsoft.com,
     SQL Named Instance: MSSQLSERVER,
     Install Folder: E:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: E:\Source\SCCM2012-R2
    ?<12-27-2014 23:39:35> INFO: Executing prerequisite functions...
    ?<12-27-2014 23:39:35> ===== INFO: Prerequisite Type & Server: SITE_SEC:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:39:35> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:39:35> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:39:35> INFO: CheckLocalSys is Admin of <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:43> SecondarySite2.microsoft.com;    Site server computer account administrative rights;    Passed
    ?<12-27-2014 23:39:43> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:39:43> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:39:43> INFO: Check Lanman service: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:44> SecondarySite2.microsoft.com;    Check Server Service is running;    Passed
    ?<12-27-2014 23:39:45> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:39:46> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Unsupported site server operating system version for Setup;    Passed
    ?<12-27-2014 23:39:46> SecondarySite2.microsoft.com;    Domain membership;    Passed
    ?<12-27-2014 23:39:47> INFO: Free disk space on target
    \\SecondarySite2.microsoft.com\E$\. = 83157 MB
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Free disk space on site server;    Passed
    ?<12-27-2014 23:39:47> SecondarySite2.microsoft.com;    Pending system restart;    Passed
    ?<12-27-2014 23:39:48> INFO: The server SecondarySite2.microsoft.com is not read-only domain controller.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Read-Only Domain Controller;    Passed
    ?<12-27-2014 23:39:48> INFO: Check FQDN Length for site server: <SecondarySite2.microsoft.com>.
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Site Server FQDN Length;    Passed
    ?<12-27-2014 23:39:48> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:39:48> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:39:48> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60);    Passed
    ?<12-27-2014 23:39:49> SecondarySite2.microsoft.com;    Microsoft Remote Differential Compression (RDC) library registered;    Passed
    ?<12-27-2014 23:39:49> INFO: Checking Windows Installer version on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:39:50> INFO: Path of Windows Installer is <\\SecondarySite2.microsoft.com\C$\Windows\system32\msi.dll>.
    ?<12-27-2014 23:39:51> INFO: Msi.dll version is: <5.0.7601.17807> .
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    Microsoft Windows Installer;    Passed
    ?<12-27-2014 23:39:51> INFO: Start Checking InstallSQLExpress on site server: SecondarySite2.microsoft.com, SQL Server instance MSSQLSERVER
    ?<12-27-2014 23:39:51> INFO: SQL Server Express installation was not selected.
    ?<12-27-2014 23:39:51> SecondarySite2.microsoft.com;    SQL Server Express on Secondary Site;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Existing Configuration Manager server components on site server;    Passed
    ?<12-27-2014 23:39:52> SecondarySite2.microsoft.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    ?<12-27-2014 23:39:52> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:52> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    SQL Server service running account;    Error;    The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service
    name> or LOCAL SERVICE.  You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
    ?<12-27-2014 23:39:53> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:39:53> INFO: SQL Server named instance <MSSQLSERVER>
    ?<12-27-2014 23:39:53> INFO: Cannot connect to registry key.
    ?<12-27-2014 23:39:53> SecondarySite2.microsoft.com;    Dedicated SQL Server instance;    Passed
    ?<12-27-2014 23:39:53> INFO: CheckSQLCollationSecondary
    ?<12-27-2014 23:39:53> INFO: Collation on <PrimarySite2DB.microsoft.com> <SQL_Latin1_General_CP1_CI_AS>
    ?<12-27-2014 23:41:27> ERROR: failed to get collation from secondary site
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;    Parent/child database collation;    Error;    The collation of the site database does not match the collation of the parent site's database.  All
    sites in a hierarchy must use the same database collation.
    ?<12-27-2014 23:41:27> INFO: Checking .NET framework versions 3.5...
    ?<12-27-2014 23:41:28> INFO: .NET is installed
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    ?<12-27-2014 23:41:28> INFO: Skipping check for .NET version, user did not select to install SQL Server Express for Secondary Site.
    ?<12-27-2014 23:41:28> SecondarySite2.microsoft.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    ?<12-27-2014 23:41:28> INFO: CheckInstallSourceVersion <E:\Source\SCCM2012-R2>
    ?<12-27-2014 23:41:29> SecondarySite2.microsoft.com;    Setup Source Version;    Passed
    ?<12-27-2014 23:41:29> INFO:CheckInstallSourcePath <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    Setup Source Folder;    Passed
    ?<12-27-2014 23:42:14> INFO: Enter CheckSecSiteSqlOnSameMachine.
    ?<12-27-2014 23:42:14> INFO: Target secondary site Machine <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> INFO: SQL Server computer <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:14> SecondarySite2.microsoft.com;    SQL Server on the Secondary Site Computer;    Passed
    ?<12-27-2014 23:42:14> INFO:CheckSupportedFQDNFormat <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:15> INFO: NetBIOS <SECONDARYSITE2>
    ?<12-27-2014 23:42:15> SecondarySite2.microsoft.com;    Primary FQDN;    Passed
    ?<12-27-2014 23:42:15> INFO:CheckMachineAccountHasADAccess <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:40> ERROR: Site server does not have create child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> WARN: Site server does not have delete child permission on AD 'System Management'
    ?<12-27-2014 23:42:40> SecondarySite2.microsoft.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer
    account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure
    required permissions, see
    http://go.microsoft.com/fwlink/p/?LinkId=233190.
    ?<12-27-2014 23:42:40> INFO:CheckRemoteWMIConnection <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Remote Connection to WMI on Secondary Site;    Passed
    ?<12-27-2014 23:42:48> INFO: Check required collation of Sql Server.
    ?<12-27-2014 23:42:48> INFO: LangID <409>
    ?<12-27-2014 23:42:48> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    ?<12-27-2014 23:42:48> SecondarySite2.microsoft.com;    Required SQL Server Collation;    Passed
    ?<12-27-2014 23:42:48> ===== INFO: Prerequisite Type & Server: SQL:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:42:48> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:42:48> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:42:48> INFO:RemoteCheckAdminOnSQL <SecondarySite2.microsoft.com>, SQL Server <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    SQL Server sysadmin rights;    Error;    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions
    on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
    ?<12-27-2014 23:44:33> ===== INFO: Prerequisite Type & Server: MP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:44:33> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Administrative share (Site system);    Passed
    ?<12-27-2014 23:44:33> INFO:CheckSiteSystemtoSQLConnectivity <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:44:33> INFO: Installing secondary site, skipping SQL Server connectivity check.
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;    Site System to SQL Server Communication;    Passed
    ?<12-27-2014 23:44:33> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:44:33> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:44:33> INFO: The rule 'Check Server Service is running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:34> INFO: OS version:601, ServicePack:1.
    ?<12-27-2014 23:44:35> INFO: Target computer is a Windows server.
    ?<12-27-2014 23:44:35> SecondarySite2.microsoft.com;    Unsupported management point operating system version for Setup;    Passed
    ?<12-27-2014 23:44:35> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> INFO: Windows Cluster not found on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    Windows Failover Cluster;    Passed
    ?<12-27-2014 23:44:36> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:44:36> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:44:36> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:44:36> SecondarySite2.microsoft.com;    IIS service running;    Passed
    ?<12-27-2014 23:45:35> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:45:35> SecondarySite2.microsoft.com;    BITS installed;    Passed
    ?<12-27-2014 23:47:00> INFO: CheckWebSvcExtnRemote, result:<7>.
    ?<12-27-2014 23:47:01> WARN: BITS Service is not running on SecondarySite2.microsoft.com.
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    BITS enabled;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for management point;    Passed
    ?<12-27-2014 23:47:01> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Firewall exception for SQL Server for management point;    Passed
    ?<12-27-2014 23:47:01> SecondarySite2.microsoft.com;    Administrative rights on management point;    Passed
    ?<12-27-2014 23:47:01> INFO:CheckV4ClientNotInstalled <SecondarySite2.microsoft.com>
    ?<12-27-2014 23:47:45> SecondarySite2.microsoft.com;    Client Version on Management Point Computer;    Passed
    ?<12-27-2014 23:47:45> ===== INFO: Prerequisite Type & Server: DP:SecondarySite2.microsoft.com =====
    ?<12-27-2014 23:47:45> <<<RuleCategory: Access Permissions>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking access permissions...>>>
    ?<12-27-2014 23:47:45> <<<RuleCategory: System Requirements>>>
    ?<12-27-2014 23:47:45> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Unsupported distribution point operating system version for Setup;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Windows Failover Cluster' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> <<<RuleCategory: Dependent Components>>>
    ?<12-27-2014 23:47:47> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Passed
    ?<12-27-2014 23:47:47> INFO: The rule 'IIS service running' has been run on server 'SecondarySite2.microsoft.com', skipped.
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    IIS HTTPS Configuration for distribution point;    Passed
    ?<12-27-2014 23:47:47> SecondarySite2.microsoft.com;    Administrative rights on distribution point;    Passed
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> ******* Prerequisite checking is completed. *******
    ?<12-27-2014 23:47:48> ***************************************************
    ?<12-27-2014 23:47:48> INFO: Updating Prerequisite checking result into the registry
    ?<12-27-2014 23:47:48> INFO: Connecting to SecondarySite2.microsoft.com registry
    ?<12-27-2014 23:47:50> INFO: Setting registry values
    ConfigMgrPrereq.log-End
    Well my question is what would be the best solutions as it bugs me for days now.
    Regards,

    Hello,
    ?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;   
    SQL Server sysadmin rights;    Error;   
    Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
    Setup cannot continue.
    Did you install SQL server with a local account?
    ?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;   
    Parent/child database collation;    Error;   
    The collation of the site database does not match the collation of the parent site's database. 
    All sites in a hierarchy must use the same database collation.
    Try this blog:
    http://jthys.wordpress.com/2012/04/02/sccm-2012-required-sql-server-collation/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

    Hi,
    Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
    Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign  2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
    IP for communicating with the CAS server which is in a different domain.? 
    Details: 
    1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
    Thanks
    Rajesh Vasudevan

    First, it's not possible. You cannot attach a primary site to an existing CAS.
    Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
    CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
    no functional differences but does add complexity, latency, and additional failure points.
    Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
    As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
    for trouble IMO.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM 2012 report w/ selectable collection

    I am trying to create a report with a selectable collection parameter.  The original query I'm using is as follows (Stolen from
    http://blogs.technet.com/b/infratalks/archive/2013/09/10/sccm-2012-reporting-get-system-serial-number-amp-create-custom-ssrs-report.aspx):
    Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
    From v_R_System SYS
      left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
      left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
      left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
      left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
      --Where sys.Name0 = @variable
      order by sys.Name0
    This works fine, but it gives me that information for EVERY machine in our infrastructure globally.  I am only interested in getting this information from machines in certain collections and I want to be able to select the collection each time I run
    the report.  I found this article:
    http://it.peikkoluola.net/2013/06/02/report-with-a-selectable-collection-parameter-sql/ and followed the steps, but cannot run the report successfully.  I'm guessing it has something to do with needing to modify my query, but I am a newb with SQL and
    have no clue what or where I should be tweaking.  Just adding "WHERE(dbo.v_FullCollectionMembership.CollectionID
    = @COLLID)" gives me a syntax error.  Moving it above "Order by sys.name0" gives an error about not being bound to anything, which makes sense but as I mentioned, I don't know what to tweak.  Help!  Thanks.

    Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
    From v_R_System SYS
      left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
      left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
      left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
      left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
      join v_fullcollectionmembership fcm on fcm.resourceid=sys.resourceid
      Where fcm.collectionid = @COLLID
      order by sys.Name0
    Try the above, note that @COLLID is a placeholder for a variable.  It is presumed that you are creating this using Report Builder 3.0 (or better) or some other SQL tool to create reports for use on your SRS reporting point.  If you happen
    to be using Report Builder, once you save the above, under parameters you'd have a place for COLLID.  Now, what you want is to be able to have that parameter be populated with your collection names, so that you can select from the list when the report
    is run.
    So... another DataSet, with a query like:
    select collectionid, name
    from v_collection
    order by name
    Then, back to your parameters, COLLID, available values, Get values from a query, and you'll want to use that dataset you just made, and Value field is collectionid, and Label field is Name.
    If you want to test the top query in regular sql, don't use @collID.  figure out the collectionid of a specific collection, and put in where fcm.collectionid='ABC00012'
    Standardize. Simplify. Automate.

  • SCCM 2012 Report for Software registered in Add/Remove programs

    Hi
    Am looking to create an SCCM 2012 Report for Software registered in Add/Remove programs on windows 7 machines but dont have enough experience with report builder to do this.
    Was hoping someone could help.

    When i use the url i still only see the following categories
    Administrative Security
    Asset Intelligence
    Client Push
    Client Status
    Compliance and Settings ManagementHave looked through them all and that one is not there
    the only software ones are the following
    Report Software 01A - Summary of installed software in a specific collectionThis report provides a summary of installed software ordered by the number of instances found from inventory.
     Open Menu
    Report Software 02A - Product families for a specific collectionThis report lists the product families and the count of software in the family for a specific collection.
     Open Menu
    Report Software 02B - Product categories for a specific product familyThis report lists the product categories in a specific product family and the count of software within the category. This report is linked to Software 02C - Software in a specific product
    family and category.
     Open Menu
    Report Software 02C - Software in a specific product family and categoryThis report lists all software that is in the specified product family and category. This report is linked to Software 06B - Software by product name.
     Open Menu
    Report Software 02D - Computers with specific software installedThis report lists all computers with specific software installed. This report is linked to Software 02E - Installed software on a specific computer .
     Open Menu
    Report Software 02E - Installed software on a specific computerThis report lists all software installed on a specific computer.
     Open Menu
    Report Software 03A - Uncategorized softwareThis report lists the software that is either categorized as unknown or has no categorization.
     Open Menu
    Report Software 04A - Software configured to automatically run on computersDisplays a list of software configured to automatically run on computers.
     Open Menu
    Report Software 04B - Computers with specific software configured to automatically runDisplays all computers with specific software configured to automatically run.
     Open Menu
    Report Software 04C - Software configured to automatically run on a specific computerDisplays installed software configured to automatically run on a specific computer.
     Open Menu
    Report Software 05A - Browser Helper ObjectsThis report displays the Browser Helper Objects installed on computers in a specific collection.
     Open Menu
    Report Software 05B - Computers with a specific Browser Helper ObjectDisplays all of the computers with a specific Browser Helper Object.
     Open Menu
    Report Software 05C - Browser Helper Objects on a specific computerDisplays all Browser Helper Objects on the specific computer.
     Open Menu
    Report Software 06A - Search for installed softwareThis report provides a summary of installed software ordered by the number of instances based on search criteria for the product name, publisher, or version.
     Open Menu
    Report Software 06B - Software by product nameThis report provides a summary of installed software ordered by the number of instances based on selected Product Name.
     Open Menu
    Report Software 07A - Recently used executable programs by the count of computersThis report displays executable programs that have been used recently with a count of computers on which they have been used. The Software Metering client must be enabled for this
    site to view this report.
     Open Menu
    Report Software 07B - Computers that recently used a specified executable programThis report displays the computers on which a specified executable program has recently been used when you enable the software metering client setting.
     Open Menu
    Report Software 07C - Recently used executable programs on a specified computerThis report displays executables that have been used recently on a specified computer when you enable the software metering client setting.
     Open Menu
    Report Software 08A - Recently used executable programs by the count of usersThis report displays executable programs that have been used recently with a count of users that have most recently used them when you enable the software metering client setting.
     Open Menu
    Report Software 08B - Users that recently used a specified executable programThis report displays the users that have most recently used a specified executable program when you enable the software metering client setting.
     Open Menu
    Report Software 08C - Recently used executable programs by a specified userThis report displays executable programs that have been used recently by a specified user when you enable the software metering client setting.
     Open Menu
    Report Software 09A - Infrequently used softwareThis report displays software titles that have not been used during a specified period of time. You can specify a value that will represent the number of days that have elapsed since the last use (e.g. if you
    enter 90 days, you will see software that was not used in the past 90 days or more). You can also leave the Days not used field empty to see all software titles that were never used.
     Open Menu
    Report Software 09B - Computers with infrequently used software installedThis report displays computers which have software installed that has not been used for a specified period of time. The specified period of time is based on the value specified in the
    'Software 09A - Infrequently used software' report.
     Open Menu
    Report Software 10A - Software titles with specific multiple custom labels definedThis report allows you to view software titles based on matching of all selected custom label criteria. Up to three custom labels can be selected to refine a software title search.
     Open Menu
    Report Software 10B - Computers with a specific custom-labeled software title installedThis report shows all computers in this collection, that have the specified custom-labeled software title installed.
     Open Menu
    Report Software 11A - Software titles with a specific custom label definedThis report allows you to view software titles based on matching of at least one of the selected custom label criteria.
     Open Menu
    Report Software 12A - Software titles without a custom labelThis report displays all software titles that do not have a custom label defined.
     Open Menu
    Report Software 14A - Search for software identification tag enabled softwareThis report provides the count of installed software with a software identification tag enabled.
     Open Menu
    Report Software 14B - Computers with specific software identification tag enabled software installedThis report lists all computers that have installed software with a specific software identification tag enabled.
     Open Menu
    Report Software 14C - Installed software identification tag enabled software on a specific computerThis report lists all installed software with a specific software identification tag enabled on a specific computer.
     Open Menu

  • How to show a filter of the values in SCCM 2012 report?

    I didn't see a forum for SCCM 2012 reporting, only SCCM 2007 Reporting, so I hope I am posting in the correct forum for this.
    We upgraded to SCCM 2012 R2 and when running a report and entering values we can no longer type in a filter and then see a filtered list of values like in SCCM 2007.
    Is there a solution for this?  This was very useful especially in the Add/Remove report because many times we don't know exactly what to enter. 
    Below is a snapshot of what we did in SCCM 2007.

    Garth, unfortunately, I don't.   I was fair at SCCM 2007 reporting and modifying SQL statements, but it seems everything has changed with SCCM 2012 reporting.  For the specific SCCM 2012 report I mentioned,  "Computers with specific software
    registered in Add Remove Programs", is there some code I could paste in somewhere to get it to operate like the SCCM 2007 report?
    Are you using BIDS or Report Builder. (Keep in mind that I recommend BIDS over RP)
    Here are the basic steps:
    Review the SQL for the Prompt
    Add a variable to the prompt
    Import; refresh the SQL query within the dataset
    Move that the new variable is BEFORE the existing variable
    Enter in the Prompt text “Enter computer filer”
    Test to make sure everything is nice
    Upload the report.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Internet Information Services (IIS) becomes Disabled automatically on SCCM 2012 Distribution Points

    Hi !
    Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points.
    Please help and share configuration steps.
    Thank you.

    This is not anything ConfigMgr is doing. The cases I've seen similar to this have had a GPO responsible for this behavior from which the site systems needed to be excluded.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • IIS Admin Service Disabled on all SCCM 2012 Distribution Points Automatically After few Hours

    Hi !
    Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points after few Hours.
    Please help and share configuration steps.
    Thank you.
    Regards,
    Faisal Alvi
    Regards, Faisal Alvi PPL

    That's not something ConfigMgr does. Examine eventlog and see if there are GPOs or whatever is disabling it.
    Torsten Meringer | http://www.mssccmfaq.de

  • SCCM 2012 Report Problem

    hi there,
    we are using sccm 2012 with reports functionality on SQL 2008 R2 since 2 weeks now and everything is working fine, including reports.
    most of the time i monitor the reports for "Status for a specified task sequence deployment on a specific computer"
    but since yesterday i noticed that i cannot see any data here anymore - all task sequence deployments (which are working fine without errors) are not shown here anymore. not only i cannot see the current deployments of computers, i am also not able to see
    data for deployments we had 2 weeks ago.
    there is no error; sccm 2012 reports are just showing me no data (just for 1,2 computers instead of 20 or 30).
    i rebooted sccm 2012 and also took a look at the component status; no error related to reporting system and reporting service is running.
    anyone has a clue?

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 Report equivalent of WSUS Report

    In the old WSUS admin console you could set your display under All Computers (and other computer groups) to show patches that were Failed/Needed/Applied. I found this EXTREMELY useful. I can not find an equivalent within SCCM 2012. Does such a report exist
    and if not, how do I go about making one? Software Updates A - Compliance, Compliance 1 is sort of close but it makes you click multiple times to get one report and you have to do it for each group. In WSUS all you had to do was click once or twice and I see
    no option equivalent to All Computers.
    Ben JohnsonWY

    Here's the whole set:
    http://social.technet.microsoft.com/Forums/en-US/78d145bb-81d2-45c7-9e23-d0980aaaf7ca/sccm-2012-r2-how-to-get-ipaddress-working-in-my-custom-report?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/d27bf671-91b4-45e9-bbc9-a3da9a4fd628/sccm-2012-compliance-7-customize-for-total-updates-needed?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/e865c492-9058-4141-9af7-26b280fbfe0b/sccm-2012-reporting-code-returns-same-value-for-total-number-of-required-updates-per-computer?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/1e5a2644-4eb7-4bed-92a3-a07d670bbb51/software-update-compliance-report-in-sccm-2012?forum=configmanagersecurity
    http://social.technet.microsoft.com/Forums/en-US/3e3e0120-7e8c-4c9f-a1e0-4dc1fffe0618/sccm-2012-report-equivalent-of-wsus-report?forum=configmanagergeneral
    Hope it helps
    Ben JohnsonWY

  • Running WMI repair script on SCCM 2012 primary site server

    Hi,
    running WMI rebuilding repository script on SCCM 2012 primary site server. Any idea what kind of issue on SCCM environment it will cause.
    Regards,
    Gopi

    Gah!  did you already do so? I hope your resume is up to date.  As to what kind of issues:  it'll break everything, and nothing will ever work right ever again.  Ever. Again.
    Standardize. Simplify. Automate.

  • SCCM 2012 report with BitLocker status

    I am not an expert in SCCM 2012 Report Builder and i am trying to create a report with>
    computername(laptop),drive letter, bitlocker status
    I can't find the property to use in report builder to read the drive letter and bitlocker status. Is there someone who can help me out or had a rdl report file for me ?
    PS. creating a query in SCCM 2012 is easy and works...but how to create a report out of it ??

    SELECT dbo.v_R_System.Name0, dbo.v_GS_ENCRYPTABLE_VOLUME.DriveLetter0, dbo.v_GS_ENCRYPTABLE_VOLUME.ProtectionStatus0
    FROM dbo.v_GS_ENCRYPTABLE_VOLUME INNER JOIN
    dbo.v_R_System ON dbo.v_GS_ENCRYPTABLE_VOLUME.ResourceID = dbo.v_R_System.ResourceID
    Please use the query above, you need to create your own data source of this Report. For more information, please ask at SQL forum, there is a dedicated SSRS forum for this kind of question.
    Juke Chou
    TechNet Community Support

Maybe you are looking for

  • How to add comments in IP so that no multiple lines are created?

    Hi, I have a problem with adding free text in IP. I'm using this How-to guide: How to Flexibly Change Characteristic Values and Comments in BI Integrated Planning http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d2b273-0e12-2c10-fab3-a34bde55

  • Mapping in RT LOG with RESA

    Hi, Can anyone tell me what are the codes used for mapping in RTLOG with RESA

  • Streaming, no video just audio

    When i try to watch clips online it does not seem to play correctly, it does not display any video content yet it plays sound? Any idea's? Thanks

  • Accounting in wireless controller

    Hi everyone! I have the question according to accounting of wi-fi users. Does wireless controller support accounting of all connections, sessions(duration,mac, ip address etc) that were made during a predefined ammount of time, for example one month?

  • Photo Booth will not open

    I just tried to use Photo Booth for the first time in about a month. I get a message telling me that the isight camera is being used by another application. There are no applications open except photo booth. Any ideas.