SCCM 2012 - Reports don´t show reality

Hello all.
I´m trying to get reports for  software titles that have not been used during a specified period of time trough default report "Software 09A".
The problem is the results don´t show the real situation. For example, got a 11k days unused software, like 30 years. =]
And more: some used softwares show as unused, and vice versa.
Anyone has the same problem and/or a solution for it?
Thanks all!

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
It sound like the issue is a corrupted SWM data for a PC. I would try to repair the client and see what changes happen. In the end their might not be anything that you can do short of deleting the PC from CM12 & letting it get re-created or running the
software on the PC to reset the usage data.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

  • SCCM 2012 Report Problem

    hi there,
    we are using sccm 2012 with reports functionality on SQL 2008 R2 since 2 weeks now and everything is working fine, including reports.
    most of the time i monitor the reports for "Status for a specified task sequence deployment on a specific computer"
    but since yesterday i noticed that i cannot see any data here anymore - all task sequence deployments (which are working fine without errors) are not shown here anymore. not only i cannot see the current deployments of computers, i am also not able to see
    data for deployments we had 2 weeks ago.
    there is no error; sccm 2012 reports are just showing me no data (just for 1,2 computers instead of 20 or 30).
    i rebooted sccm 2012 and also took a look at the component status; no error related to reporting system and reporting service is running.
    anyone has a clue?

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Reports don't show on SCCM 2012 SP1 Console

    Hello everyone,
    We are encountering a strange issue with the SCCM 2012 reporting services. I was creating a custom report earlier. At some point, and I don't know exactly how, I could not open the Reports hive on the 'Monitoring' wunderbar. No reports load in the console.
    When I right-click "Reports" and choose "Create Report" it throws up an error "The request failed with HTTP status 401: Unauthorised".
    When the above happens, what I see is that the report services service account keep getting locked out.
    I can open both http://RerportingServicesServer/Reports ad well as http://RerportingServicesServer/ReportServer using the service account (when not locked) to see the reports but I can not launch 'Report Builder' option.
    It's really strange. Looks as if the SCCM console is wrongly passing the stored service account while connecting to the reporting service.
    The rest of the SCCM appears to be fine. The SQL services appear to be running fine (i.e. they are not stopped).
    Any idea?

    Hi all. Apologies for not getting back sooner. The issue hasn't gone away, instead I am using a workaround.
    It appears to be a bug in the console to me. It looks like the problem is confined to my own account where as for other user accounts, the Reports do appear on the console on the same server.
    As far as I remember (it was a while back;)) the problem originally occurred when I had opened the Report Builder (select report -> Right-click edit) it prompted me for logon credentials where I entered the report service service account which
    has permissions to create/edit reports (but I also selected "save windows credentials" at that time which I think is the problem). It is since then things appear to be going wrong for my account. Now when I access the Reports folder on the console, the reports
    don't appear. When I right-click to create report, the above "The request failed with HTTP status 401: Unauthorised" error appears. And then I notice that the report services service
    account (which I had entered initially several days ago before the error had first occurred) gets locked out. It looks like the Admin console is trying to pass the corrupt(?) Report service service account credentials to the Reports module and
    that's where the problem lies. Though I could be wrong.

  • How to show a filter of the values in SCCM 2012 report?

    I didn't see a forum for SCCM 2012 reporting, only SCCM 2007 Reporting, so I hope I am posting in the correct forum for this.
    We upgraded to SCCM 2012 R2 and when running a report and entering values we can no longer type in a filter and then see a filtered list of values like in SCCM 2007.
    Is there a solution for this?  This was very useful especially in the Add/Remove report because many times we don't know exactly what to enter. 
    Below is a snapshot of what we did in SCCM 2007.

    Garth, unfortunately, I don't.   I was fair at SCCM 2007 reporting and modifying SQL statements, but it seems everything has changed with SCCM 2012 reporting.  For the specific SCCM 2012 report I mentioned,  "Computers with specific software
    registered in Add Remove Programs", is there some code I could paste in somewhere to get it to operate like the SCCM 2007 report?
    Are you using BIDS or Report Builder. (Keep in mind that I recommend BIDS over RP)
    Here are the basic steps:
    Review the SQL for the Prompt
    Add a variable to the prompt
    Import; refresh the SQL query within the dataset
    Move that the new variable is BEFORE the existing variable
    Enter in the Prompt text “Enter computer filer”
    Test to make sure everything is nice
    Upload the report.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 report w/ selectable collection

    I am trying to create a report with a selectable collection parameter.  The original query I'm using is as follows (Stolen from
    http://blogs.technet.com/b/infratalks/archive/2013/09/10/sccm-2012-reporting-get-system-serial-number-amp-create-custom-ssrs-report.aspx):
    Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
    From v_R_System SYS
      left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
      left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
      left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
      left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
      --Where sys.Name0 = @variable
      order by sys.Name0
    This works fine, but it gives me that information for EVERY machine in our infrastructure globally.  I am only interested in getting this information from machines in certain collections and I want to be able to select the collection each time I run
    the report.  I found this article:
    http://it.peikkoluola.net/2013/06/02/report-with-a-selectable-collection-parameter-sql/ and followed the steps, but cannot run the report successfully.  I'm guessing it has something to do with needing to modify my query, but I am a newb with SQL and
    have no clue what or where I should be tweaking.  Just adding "WHERE(dbo.v_FullCollectionMembership.CollectionID
    = @COLLID)" gives me a syntax error.  Moving it above "Order by sys.name0" gives an error about not being bound to anything, which makes sense but as I mentioned, I don't know what to tweak.  Help!  Thanks.

    Select sys.Name0 Machine, CS.UserName0 'User Name',OS.Caption0 OS, OS.CSDVersion0 'Service Pack',CS.Manufacturer0 Manufacturer,CS.Model0 Model,BIOS.SerialNumber0 'Serial Number',RAM.Capacity0 Memory, cs.SystemType0
    From v_R_System SYS
      left join v_GS_COMPUTER_SYSTEM CS on sys.Name0=cs.Name0
      left join v_GS_PC_BIOS BIOS on sys.ResourceID=bios.ResourceID
      left join v_GS_OPERATING_SYSTEM OS on sys.ResourceID=OS.ResourceID
      left join v_GS_PHYSICAL_MEMORY RAM on sys.ResourceID=ram.ResourceID
      join v_fullcollectionmembership fcm on fcm.resourceid=sys.resourceid
      Where fcm.collectionid = @COLLID
      order by sys.Name0
    Try the above, note that @COLLID is a placeholder for a variable.  It is presumed that you are creating this using Report Builder 3.0 (or better) or some other SQL tool to create reports for use on your SRS reporting point.  If you happen
    to be using Report Builder, once you save the above, under parameters you'd have a place for COLLID.  Now, what you want is to be able to have that parameter be populated with your collection names, so that you can select from the list when the report
    is run.
    So... another DataSet, with a query like:
    select collectionid, name
    from v_collection
    order by name
    Then, back to your parameters, COLLID, available values, Get values from a query, and you'll want to use that dataset you just made, and Value field is collectionid, and Label field is Name.
    If you want to test the top query in regular sql, don't use @collID.  figure out the collectionid of a specific collection, and put in where fcm.collectionid='ABC00012'
    Standardize. Simplify. Automate.

  • SCCM 2012 Report equivalent of WSUS Report

    In the old WSUS admin console you could set your display under All Computers (and other computer groups) to show patches that were Failed/Needed/Applied. I found this EXTREMELY useful. I can not find an equivalent within SCCM 2012. Does such a report exist
    and if not, how do I go about making one? Software Updates A - Compliance, Compliance 1 is sort of close but it makes you click multiple times to get one report and you have to do it for each group. In WSUS all you had to do was click once or twice and I see
    no option equivalent to All Computers.
    Ben JohnsonWY

    Here's the whole set:
    http://social.technet.microsoft.com/Forums/en-US/78d145bb-81d2-45c7-9e23-d0980aaaf7ca/sccm-2012-r2-how-to-get-ipaddress-working-in-my-custom-report?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/d27bf671-91b4-45e9-bbc9-a3da9a4fd628/sccm-2012-compliance-7-customize-for-total-updates-needed?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/e865c492-9058-4141-9af7-26b280fbfe0b/sccm-2012-reporting-code-returns-same-value-for-total-number-of-required-updates-per-computer?forum=configmanagergeneral
    http://social.technet.microsoft.com/Forums/en-US/1e5a2644-4eb7-4bed-92a3-a07d670bbb51/software-update-compliance-report-in-sccm-2012?forum=configmanagersecurity
    http://social.technet.microsoft.com/Forums/en-US/3e3e0120-7e8c-4c9f-a1e0-4dc1fffe0618/sccm-2012-report-equivalent-of-wsus-report?forum=configmanagergeneral
    Hope it helps
    Ben JohnsonWY

  • SCCM 2012 Report for Software registered in Add/Remove programs

    Hi
    Am looking to create an SCCM 2012 Report for Software registered in Add/Remove programs on windows 7 machines but dont have enough experience with report builder to do this.
    Was hoping someone could help.

    When i use the url i still only see the following categories
    Administrative Security
    Asset Intelligence
    Client Push
    Client Status
    Compliance and Settings ManagementHave looked through them all and that one is not there
    the only software ones are the following
    Report Software 01A - Summary of installed software in a specific collectionThis report provides a summary of installed software ordered by the number of instances found from inventory.
     Open Menu
    Report Software 02A - Product families for a specific collectionThis report lists the product families and the count of software in the family for a specific collection.
     Open Menu
    Report Software 02B - Product categories for a specific product familyThis report lists the product categories in a specific product family and the count of software within the category. This report is linked to Software 02C - Software in a specific product
    family and category.
     Open Menu
    Report Software 02C - Software in a specific product family and categoryThis report lists all software that is in the specified product family and category. This report is linked to Software 06B - Software by product name.
     Open Menu
    Report Software 02D - Computers with specific software installedThis report lists all computers with specific software installed. This report is linked to Software 02E - Installed software on a specific computer .
     Open Menu
    Report Software 02E - Installed software on a specific computerThis report lists all software installed on a specific computer.
     Open Menu
    Report Software 03A - Uncategorized softwareThis report lists the software that is either categorized as unknown or has no categorization.
     Open Menu
    Report Software 04A - Software configured to automatically run on computersDisplays a list of software configured to automatically run on computers.
     Open Menu
    Report Software 04B - Computers with specific software configured to automatically runDisplays all computers with specific software configured to automatically run.
     Open Menu
    Report Software 04C - Software configured to automatically run on a specific computerDisplays installed software configured to automatically run on a specific computer.
     Open Menu
    Report Software 05A - Browser Helper ObjectsThis report displays the Browser Helper Objects installed on computers in a specific collection.
     Open Menu
    Report Software 05B - Computers with a specific Browser Helper ObjectDisplays all of the computers with a specific Browser Helper Object.
     Open Menu
    Report Software 05C - Browser Helper Objects on a specific computerDisplays all Browser Helper Objects on the specific computer.
     Open Menu
    Report Software 06A - Search for installed softwareThis report provides a summary of installed software ordered by the number of instances based on search criteria for the product name, publisher, or version.
     Open Menu
    Report Software 06B - Software by product nameThis report provides a summary of installed software ordered by the number of instances based on selected Product Name.
     Open Menu
    Report Software 07A - Recently used executable programs by the count of computersThis report displays executable programs that have been used recently with a count of computers on which they have been used. The Software Metering client must be enabled for this
    site to view this report.
     Open Menu
    Report Software 07B - Computers that recently used a specified executable programThis report displays the computers on which a specified executable program has recently been used when you enable the software metering client setting.
     Open Menu
    Report Software 07C - Recently used executable programs on a specified computerThis report displays executables that have been used recently on a specified computer when you enable the software metering client setting.
     Open Menu
    Report Software 08A - Recently used executable programs by the count of usersThis report displays executable programs that have been used recently with a count of users that have most recently used them when you enable the software metering client setting.
     Open Menu
    Report Software 08B - Users that recently used a specified executable programThis report displays the users that have most recently used a specified executable program when you enable the software metering client setting.
     Open Menu
    Report Software 08C - Recently used executable programs by a specified userThis report displays executable programs that have been used recently by a specified user when you enable the software metering client setting.
     Open Menu
    Report Software 09A - Infrequently used softwareThis report displays software titles that have not been used during a specified period of time. You can specify a value that will represent the number of days that have elapsed since the last use (e.g. if you
    enter 90 days, you will see software that was not used in the past 90 days or more). You can also leave the Days not used field empty to see all software titles that were never used.
     Open Menu
    Report Software 09B - Computers with infrequently used software installedThis report displays computers which have software installed that has not been used for a specified period of time. The specified period of time is based on the value specified in the
    'Software 09A - Infrequently used software' report.
     Open Menu
    Report Software 10A - Software titles with specific multiple custom labels definedThis report allows you to view software titles based on matching of all selected custom label criteria. Up to three custom labels can be selected to refine a software title search.
     Open Menu
    Report Software 10B - Computers with a specific custom-labeled software title installedThis report shows all computers in this collection, that have the specified custom-labeled software title installed.
     Open Menu
    Report Software 11A - Software titles with a specific custom label definedThis report allows you to view software titles based on matching of at least one of the selected custom label criteria.
     Open Menu
    Report Software 12A - Software titles without a custom labelThis report displays all software titles that do not have a custom label defined.
     Open Menu
    Report Software 14A - Search for software identification tag enabled softwareThis report provides the count of installed software with a software identification tag enabled.
     Open Menu
    Report Software 14B - Computers with specific software identification tag enabled software installedThis report lists all computers that have installed software with a specific software identification tag enabled.
     Open Menu
    Report Software 14C - Installed software identification tag enabled software on a specific computerThis report lists all installed software with a specific software identification tag enabled on a specific computer.
     Open Menu

  • The database migration report don't show all the erros at creation time

    Hello experts,
    I'm using omwb to migrate a sql server database, i realize that at creation of oracle model there are few stored procedures that was not created.. those object doesn't appear in the Errors_and_Warnings_report.htm but in the logs. My question is why the report don't show those objects?
    Another question: how to list the objects that the tool was unable to create in the oracle model?
    best regards

    HHerrera,
    Are the stored procedures that were not created, but were not in the in the Errors_and_Warnings report, visible in oracle, i.e. is the text available in Oracle? If so, it would be easy to compile all the objects in your schema and do a select to see which stored procedures were invalid.
    Regards,
    Turloch

  • SCCM 2012 report with BitLocker status

    I am not an expert in SCCM 2012 Report Builder and i am trying to create a report with>
    computername(laptop),drive letter, bitlocker status
    I can't find the property to use in report builder to read the drive letter and bitlocker status. Is there someone who can help me out or had a rdl report file for me ?
    PS. creating a query in SCCM 2012 is easy and works...but how to create a report out of it ??

    SELECT dbo.v_R_System.Name0, dbo.v_GS_ENCRYPTABLE_VOLUME.DriveLetter0, dbo.v_GS_ENCRYPTABLE_VOLUME.ProtectionStatus0
    FROM dbo.v_GS_ENCRYPTABLE_VOLUME INNER JOIN
    dbo.v_R_System ON dbo.v_GS_ENCRYPTABLE_VOLUME.ResourceID = dbo.v_R_System.ResourceID
    Please use the query above, you need to create your own data source of this Report. For more information, please ask at SQL forum, there is a dedicated SSRS forum for this kind of question.
    Juke Chou
    TechNet Community Support

  • SCCM 2012 Report that shows the users with specific software installed

    Hi,
    Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
    1. Adobe(all versions)
    2. Photoshop(all versions)
    3. MS Project(all versions)
    4. MS Vision(all versions)
    Regards, Lorin Davis

    Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

  • SCCM 2012 report Shows as Non-Complaint

     Hi , I am new for SCCM 2012 , Today i have created the deployment in sccm 2012...
    After some time i view my SCCM Status ...  Some of the systems are shows as NON-Complaint
    I have checked all log files in sccm client side , it doesn't show any error.
    I have check the SCCM client version is up-to-date.
    What can i do.. Pls help....  

    So many SU will have multiple versions, are you sure that you are deploying the needed SU to these PC? Why do you think that the reports are wrong?
    http://www.enhansoft.com/

  • SCCM 2012 Reporting point server instance blank

    I have installed SCCM 2012 With remote SQL database server successfully, at the time of Reporting service point role installation, its verified the SCCm database successfully but SQL server service instance is blank, what would be the reason....
    Below my SCCM architecture:
    1. Created one Database in Remote server SQL server is in failover cluster active passive mode
    2. Configured Reporting services in active mode.
    3. at the time of reporting point role installed failover cluster database name given and its successfully verified with SCCM_123 database.
    4. on the instance name showing blank.
    Please help me if anyone facing this type of problem.
    Thanks in advance.
    Rishi!!
    Regards, Rishi

    It is not totally intuitive when installing the Reporting Point role with a cluster.  When installing a Failover Cluster, SSRS can only get put on one node or on its own box, as it uses NLB for scale-out not FoC.  SSRS is also not configured by
    default if you use it with a clustered SQL instance, so you have to open SSRS Configuration Tool and make sure the ReportServerDB is created, and that the URLs can be browsed.  Once that is done, then try adding it in CfgMgr:
    In CfgMgr, In the Administration workspace, expand Site Configuration, and then click
    Servers and Site System Roles.
    Select the node that has SSRS installed on it (not the Failover Cluster virtual computer account).  If SSRS is on its own box, first you have to go to
    New site system and add the SSRS box.
    Then, on the Home tab, in the Server group, click
    Add Site System Role. The Add Site System Roles Wizard opens.  Choose Reporting Point, and after verifying the connection to the CfgMgr DB, the instance name should populate.
    http://technet.microsoft.com/en-us/library/gg712698#BKMK_InstallReportingServicesPoint
    http://social.technet.microsoft.com/Forums/en-HK/configmanagerdeployment/thread/390a6ea8-8a24-47d0-b6ad-2e1063bbc72d

  • MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

    Hi
    I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
    error message.
    "Error: the 'MBAM Policy' view does not exist"
    Any ideas why this is? I get the same error message with all 4 reports.

    Hi Slycy,
    There is another thread that seems to be a similar issue
    here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
    Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
    Make MBAM MOF changes
    Select TPM spec version in hardware inventory
    Install MBAM CM Integration feature
    Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
    Perform hardware inventory
    Update MBAM Supported Computers collection membership.  The machine should appear if it meets the criteria
    Run another machine policy refresh on the client so that the Configuration Baseline will come down
    Make sure that the MBAM agent has woken up once
    Evaluate the Configuration Baseline
    The MBAM views should be created now.
    You don't have to do this for every machine, but this is the process to speed it up.  If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
    Hope this helps,
    David

  • GDI Error - Charts not visible in sccm 2012 reports

    I'm trying to run some default out of box reports for my sccm 2012 environment and finding that the raw data in table format is being provided but if there's any charts that should be included in the report they're not showing up. In the SSRS logs I see
    the error below:
    reportrendering!ReportServer_0-245!7e88!04/30/2015-11:09:07:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: , Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: A generic error occurred
    in GDI+. ---> System.Runtime.InteropServices.ExternalException: A generic error occurred in GDI+.
    In researching this I found similar issues out there where Hotfix-KB2823372 resolved the issue but this now looks to only be available for Windows8 as I tried to download the Hotfix and run on my server to only receive a message advising it's not applicable.
    Please advise if you've seen this error before and what you've done to resolve it.
    Jason

    What operating system are you using? That hotfix should do the trick for Windows Server 2012, see also:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8b47f28e-c6d5-497e-85db-d89a74fb27cd/a-generic-error-occured-in-gdi-error-ssrs-2012-sp1-on-windoes-server-2012?forum=sqlreportingservices
    For Windows Server 2008 R2, see:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/50c071db-b4fc-4a2e-a9f4-e10e833c97d2/report-not-rendering-charts-in-pdf-a-generic-error-occurred-in-gdi?forum=sqlreportingservices
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SCCM 2012 report on computers with local shares and share permissions

    Very new to SCCM 2012, want to put together a report to show computers with local shares and the permissions on those shares (for security purposes, need to investigate any systems that have open shares_.
    Managed to add and now collecting information that populates v_gs_share and I have a handle on the report itself, just wondering how to collect the share permissions - I've seen other qustions on the boards that are similar but reference earlier versions
    of SCCM so wondering how to do it in 2012.
    Thanks

    So, where are you at?  The script is running, and the clients have the data in their local WMI namespace, root\cimv2\sms_sharepermissions ?
    So all that's left is to modify hardware inventory to pull that custom WMI Namespace in?  If so, it's not too horrid.  Take note of a workstation (or server) to which you have remote rights to; and which has run the script, so that on THAT specific
    machine, root\cimv2\SMS_SharePermissions exists.
    In your CM12 Console, Administration, Client Settings.  Right-click "Default Client Settings", Properties.  On the left, select "hardware inventory".  then on the right, Set classes..., now the fun part.
    Add...
    Connect..., and put in ThatServerOrWorkstation (for computername), and wmi namespace is root\cimv2.  Click the option "recursive", Connect.  (the trick here is rights to the target).
    From the results, it might be easiest to click on "classname" at the top for sorting, then go find SMS_SharePermissions.  Select that, ok ok ok ok (however many times you need to agree); and... we're done here.  Sit and wait for inventory to report
    that data up.  If you're paranoid, you can monitor dataldr.log; and force policy refreshes and hinv deltas on some boxes; but the key is patience.  if you think you've waited long enough; you probably haven't.  ;)
    Standardize. Simplify. Automate.

Maybe you are looking for