SCCM 2012 root domain client management from child domain

Hi All,
We have SCCM 2012 environment in Child domain and we would like to manage the root domain clients as well. we are using https mode. What all configuration do we need to make for root domain clients to monitor successfully from child domain.
Is it mandatory to create System Management container for the Root domain? if yes what all permission i need to give for that System Management container.
Do we need to enable Active directory forest discovery?
Regards,
Bhaskar K

No, you do not need to create the System Management container or publish info into it and no you do not need to enable forest discovery.
ConfigMgr ultimately does not care about AD. AD can be used by clients to help them locate services and configure themselves, but this can also be accomplished in other ways in ConfigMgr.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

SCCM 2012 Internet based client management

I used the link below to get started. I'm testing now on my test client. The test client is showing Client Certificate: Self-signed. The connection type however is correct: Currently Internet. Also under Internet-based management point. The
server name is correct. However when looking at the client's ccmexec.log. It appears to be trying HTTP instead of HTTPS.
http://www.systemcenterdudes.com/internet-based-client-management/
Thoughts?

If it shows a self-signed certificate the client won't be able to connect. The Internet-based management could be because you've provided it during the installation of the client, or if the client was on the intranet before, received via a client policy.
If you just installed that client while not on the intranet, start with the
ClientIDManagerStartup.log. If the client was working before on the intranet, start with the
CcmMessaging.log.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Does SCCM 2012 R2 supports PXE boot from Unix servers.

Does SCCM 2012 R2 supports PXE boot from Unix DHCP servers.
The client has DHCP on Unix servers. There are no Windows DHCP servers in the environment. Do we need Windows DHCP server for PXE boot.

You can use any modern DHCP server in your environment. DHCP is just used to help point the BIOS/Network Card to the right server, which in this case is your ConfigMgr Distribution Point with PXE Enabled.
It is strongly recommended to use IP Helper Addresses instead of the DHCP options though.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 Multiple Domains with a single SCCM instance

Hello:
Can SCCM 2012 be deployed to multiple untrusted domains within a single install?
I work for a company that maintains multiple client networks all Windows Domain and non are trusted / or are even aware of the other sites.
I would like to setup a SCCM 2012 (and also a Virtual Machine Manager for HyperV) at my office and manage all my different client sites from the single SCCM server.
The connection would be from my office over the Internet in through their on prem firewall
Currently we use Centra Stage and have used Kaseya in the past. I am looking to move from them and focus on SCCM to do this for me.
Is this even possible to do with the product?
Thanks in Advance!
-David

Yes, ConfigMgr can manage (un)trusted forests, but what exactly do you mean with "not aware of the other sites"? A requirement is that name resolution and a connection is possible.
For some good scenario's see also this series:
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 R2 install client error

I have installed SCCM 2012 R2 on server 2008 R2. I tried to deploy the SCCM client to a pc. Below is the error i get from the log file of the PC
<![LOG[==========[ ccmsetup started in process 2892 ]==========]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:9369">
<![LOG[Running on platform X64]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="util.cpp:1809">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:717">
<![LOG[CcmSetup version: 5.0.7884.1000]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:723">
<![LOG[In ServiceMain]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:3355">
<![LOG[Running on OS (6.1.7600). Service Pack (0.0). SuiteMask = 256. Product Type = 1]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:2688">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1"
thread="1476" file="ccmsetup.cpp:3580">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:3752">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:3753">
<![LOG[SslState value: 224]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:4376">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8549">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8564">
<![LOG[CCMHTTPSSTATE:    224]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8582">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8600">
<![LOG[FSP:    ]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8652">
<![LOG[CCMFIRSTCERT:    1]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8710">
<![LOG[Config file:      C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:4490">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4491">
<![LOG[MSI log file:     C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:4492">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="CHO" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="12:21:29.848-120" date="04-16-2014"
component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4493">
<![LOG[Source List:]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4501">
<![LOG[                  \\TSCCM.testnet.ac.za\SMSClient]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:4508">
<![LOG[                  \\TSCCM.TESTNET.AC.ZA\SMSClient]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:4517">
<![LOG[MPs:]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4520">
<![LOG[                  TSCCM.testnet.ac.za]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:4535">
<![LOG[No version of the client is currently detected.]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2749">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="12:21:29.879-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:9213">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="12:21:29.879-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:9697">
<![LOG[Running as user "SYSTEM"]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:1975">
<![LOG[Detected 118408 MB free disk space on system drive.]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="util.cpp:600">
<![LOG[Checking Write Filter Status.]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2002">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:2029">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=CHO))']LOG]!><time="12:21:30.020-120" date="04-16-2014" component="ccmsetup" context="" type="0"
thread="1476" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7884.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>CHO</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=CHO</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="testnet.ac.za" /><Forest Value="testnet.ac.za" /></ClientOperationalSettings>']LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="0"
thread="1476" file="lsadcache.cpp:236">
<![LOG[Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1"
thread="1476" file="ccmutillib.cpp:373">
<![LOG[The MP name retrieved is 'TSCCM.testnet.ac.za' with version '7884' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="12:21:30.067-120"
date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="lsadcache.cpp:334">
<![LOG[MP 'TSCCM.testnet.ac.za' is compatible]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'CHO']LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7884.1000' from AD for site 'CHO']LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="siteinfo.cpp:575">
<![LOG[SiteCode:         CHO]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2054">
<![LOG[SiteVersion:      5.00.7884.1000]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2055">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1"
thread="1476" file="ccmsetup.cpp:2089">
<![LOG[Only one MP TSCCM.testnet.ac.za is specified. Use it.]LOG]!><time="12:21:30.113-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:10014">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="12:21:30.113-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:10952">
<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="12:21:30.113-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="lsad.cpp:714">
<![LOG[Current AD forest name is testnet.ac.za, domain name is testnet.ac.za]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476"
file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1172">
<![LOG[Adapter {7B324A4B-C8EF-4EF2-9862-97959D800C82} is DHCP enabled. Checking quarantine status.]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476"
file="ccmiputil.cpp:436">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="CHO"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="testnet.ac.za"/>
    <Domain Name="testnet.ac.za"/>
    <IPAddresses>
<IPAddress SubnetAddress="192.168.4.0" Address="192.168.4.196"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{989E29EE-9AC7-4153-AE74-BD236430EEFD}</ID><SourceHost>SURVEILANCE</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SURVEILANCE:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>TSCCM.testnet.ac.za</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-16T10:21:30Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1132"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="12:21:30.129-120" date="04-16-2014"
component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://TSCCM.testnet.ac.za/ccm_system/request']LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 404]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'TSCCM.testnet.ac.za'. Error 0x80004005]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476"
file="ccmsetup.cpp:11195">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='101' will not be sent.]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:9697">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:8767">
<![LOG[Current AD forest name is testnet.ac.za, domain name is testnet.ac.za]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476"
file="lsad.cpp:842">
<![LOG[Domain joined client is in Intranet]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476" file="lsad.cpp:1018">
<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476" file="lsad.cpp:770">
<![LOG[DHCP entry points already initialized.]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:75">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1172">
<![LOG[Adapter {7B324A4B-C8EF-4EF2-9862-97959D800C82} is DHCP enabled. Checking quarantine status.]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476"
file="ccmiputil.cpp:436">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="CHO"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="testnet.ac.za"/>
    <Domain Name="testnet.ac.za"/>
    <IPAddresses>
<IPAddress SubnetAddress="192.168.4.0" Address="192.168.4.196"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="12:31:30.258-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{E94533DE-45F4-43BC-94EA-F28627212DE4}</ID><SourceHost>SURVEILANCE</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SURVEILANCE:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>TSCCM.testnet.ac.za</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-16T10:31:30Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1132"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="12:31:30.258-120" date="04-16-2014"
component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://TSCCM.testnet.ac.za/ccm_system/request']LOG]!><time="12:31:30.258-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 404]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'TSCCM.testnet.ac.za'. Error 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476"
file="ccmsetup.cpp:11195">
<![LOG[Failed to find DP locations from MP 'TSCCM.testnet.ac.za' with error 0x80004005, status code 404. Check next MP.]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="2"
thread="1476" file="ccmsetup.cpp:11051">
<![LOG[Only one MP TSCCM.testnet.ac.za is specified. Use it.]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:10014">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="ccmsetup.cpp:11080">
<![LOG[GET 'HTTP://TSCCM.testnet.ac.za/CCM_Client/ccmsetup.cab']LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="httphelper.cpp:807">
<![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 404)]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476"
file="httphelper.cpp:1013">
<![LOG[DownloadFileByWinHTTP failed with error 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="httphelper.cpp:1081">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:10813">

From the above log file: "Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 404)"
404 = Not Found
There are actually multiple 404's in there which leads me to believe your MP is not healthy. Have you reviewed it's health in the console (under the monitoring workspace).
Jason | http://blog.configmgrftw.com

SCCM 2012 SP1 CU3 - Client Install on SiteServer (PrimarySite)

We have an issue with SCCM 2012 Client deployment on our primary site all other clients are installing correctly the error is attached.
I have tried various ways to install client push even tried the SP1 Client using ccmsetup /source and this also fails at the same point.
I have done self service google and discovered this
http://www.mail-archive.com/[email protected]/msg03811.html
Anyone any ideas????

80041002=
Not found
Source: Windows Management (WMI)
Also, 1603 is a MSI exit code meaning fatal error occurred.
Have you verified you are running the SP1 sccm client and not RTM on the machine is question?
Justin Chalfant | My Blog |
LinkedIn | Please mark as helpful/answer if this resolved your post
Thanks, we have checked the error codes.
We have tested the client install onto the primary server in three different sites, on different networks/labs/environments with the same result.
Yes we have verified we are running SP1 CU3 and that the client files are the correct versions.
To eliminate the probable cause of CU3 updates being at fault, we have obtained the Client folder from the SP1 ISO (the later released updated SP1 ISO), with the exact same error.

SCCM 2012 R2 Migration - Clients being lost

I am in the process of migrating SCCM 2007 to SCCM 2012 R2. I had about 11 clients that all were working successfully for about a week. As of yesterday all are reporting as Client "No", client type "None" but with the site
code of the 2012 R2 server. If I check the clientlocation log file of one of the clients, I don't see it reporting to the old SCCM server or anything like that. SCEP definitions are still deploying successfully, however I can't deploy any packages
to any of the devices.
Any ideas where I should start looking?
* Edit: A software updates deployment I just made started and is asking for a reboot. However my client in SCCM still shows Client as No, Client type as None. Also, there is no information listed for Policy Request, Heartbeat DDR, Hardware
Scan, Software Scan, Management Point, etc. This information was there as of yesterday morning.

I think I figured this out. I had the 'Clear Install Flag' maintenance task set to run every Tuesday/Wednesday/Sunday between 12AM and 5AM for anything without a heartbeat within the last 4 days. Heartbeat Discovery was configured to only run
once a week. I think it just ended up clearing the install flag on my test clients.

SCCM 2012 R2 CU2 Clients Will Not Download Anything Using BITS, error 0x801901F4

I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. Clients will not download anything that require BITS transfers. The root of the problem seems to be in the DataTransferService.log. These lines keep appearing over and over:
CDTSJob::HandleErrors DTS Job '(a GUID)' BITS Job '(a GUID)' under user '(SID)' OldErrorCount: 11 NewErrorCount: 12 ErrorCode 0x801901F4 (of course, error counts increment)
CDTSJob:Handlerrors DTS Job = '(GUID matching one above)' URL='http://dpname and package path' ProtType=1
Any input appreciated.
Ben JohnsonWY

Well, I found a problem. LOCAL SERVICE was running the Distribution Points Pool in IIS and Local Service didn't have rights to c:\windows\Microsoft.Net\Framework64\V4.0.30319 on the DP server. Once it did that it cleared up some IIS problems but not this
problem.
0x80070003 seems to mean "path not found". In DataTransferService.log the path it's trying to get to is
http://fullservername:80/sms_dp_smspkg$/abc00012. When I enter that path into a browser URL bar, it displays this info:
date time 50449456
http://fullservername:80/sms_dp_smspkg$/abc0012.2/exe file of patch it's trying to pull.
The clients seem unable to find the path to the patches.
Ben JohnsonWY

Sccm 2012 https workgroup client installation error

Hello everyone,
i got a problem workgroup client installation with PKI.
My SCCM 2012 SP1 hierarchy is:
sccm1.izmir.local = Primary Site Server, FSP, MP, SUP
sccm2.izmir.local = MP,DP (internet FQDN is sccmextmp2.izmir.com)
sccm3.izmir.local = MP,DP, Enrollment Point, Enrollment Proxy Point
sccm4.izmir.local = Reporting Service Point, Application Catalog Web Service Point and Applicaiton Catalog Web Site Point
All MP's and DP's IIS configured with Certificate and client has got certificate too.
i'm using this parameters for installing workgroup client with PKI:
ccmsetup.exe /source:D:\Client /UsePKICert /NoCRLCheck CCMHOSTNAME=sccmextmp2.izmir.com SMSSIGNCERT=D:\Client\sccm1.cert SMSSITECODE=TCP FSP=sccm1.izmir.local CCMALWAYSINF=1 CCMFIRSTCERT=1
and my error is in the ccmsetup.log:
<![LOG[MSI: Action 11:56:36: SmsSetClientConfig. Applies the configuration placed by SmsSetClientConfigInit and configures client framework.]LOG]!><time="11:56:36.673-120" date="02-11-2013" component="ccmsetup" context=""
type="0" thread="5604" file="msiutil.cpp:314">
<![LOG[MSI: Setup failed due to unexpected circumstances
The error code is 80070002]LOG]!><time="11:56:36.719-120" date="02-11-2013" component="ccmsetup" context="" type="3" thread="5604" file="msiutil.cpp:300">
<![LOG[MSI: Action 11:56:36: Rollback. Rolling back action:]LOG]!><time="11:56:36.907-120" date="02-11-2013" component="ccmsetup" context="" type="0" thread="5604" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: SmsSetClientConfig.
ErrorMessages:
Setup failed due to unexpected circumstances
The error code is 80070002
]LOG]!><time="11:56:49.886-120" date="02-11-2013" component="ccmsetup" context="" type="3" thread="5604" file="msiutil.cpp:872">
<![LOG[Next retry in 120 minute(s)...]LOG]!><time="11:56:49.948-120" date="02-11-2013" component="ccmsetup" context="" type="0" thread="5604" file="ccmsetup.cpp:8498">
You got any idea?
thanks..
MCT

Hi;
yes i'm using last version of SP1 and applied that hotfix.
By the way i fixed the problem but now i got anothers:) Now i have no errorst in ccmsetup.log. Client agent installed but in Configuration Manager Agent Client certificate:None and Connection Type: Unknown
CertificateMaintenance.log
MCT

SCCM 2012 moving site Database server from SQL 2008 R2 cluster to 2012 cluster

Hello,<o:p></o:p>
Using the SCCM 2012 setup, I get
the following errors and then it eventually fails……I’ve been uninstalled and
installed SQL native client .....still unable to move SQL database,i get this error:<o:p></o:p>
*** Failed to connect to the SQL Server, connection type: SMS ACCESS. Configuration Manager Setup 25/02/2015 21:01:03 8624 (0x21B0)
INFO: SQL Connection failed. Connection: SMS ACCESS, Type: Secure Configuration Manager Setup 25/02/2015 21:01:03 8624 (0x21B0)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 25/02/2015 21:01:07 8624 (0x21B0)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 25/02/2015 21:01:07 8624 (0x21B0)
I know that the problem is related to a certificat issue but i didn't arrived to resolve it.

Have a look at this post (pay special attention to the comments):
http://blogs.technet.com/b/configurationmgr/archive/2013/04/02/how-to-move-the-configmgr-2012-site-database-to-a-new-sql-server.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 Secondary site Client Communication for SUP

Hi,
We have an SCCM 2012 Setup and here is the design CAS-->Primary-->Secondary site servers.
SUP is configured for Secondary site too. Boundaries are defined with IP Address Range and is proper.
Some clients are comminicating to Secondary site for updates. Downloading successfully and installing the software.
But some of the clients are communicating to primary site for updates and retain with the status "Downloading update"
I have checked the locationservices.log and it is fluctuating between Primary and secondary MP.
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
I have also checed "DataTransferService.log" and found more errors.
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 5576 (0x15C8)
DTSJob {141CB5AE-8EF2-464D-8D8C-68B868EE7F7B} in state 'DownloadingManifest'. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Failed to send request to /SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4 at host xxxxxxxx.xxxxxxx.com, error 0x2efe DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
[CCMHTTP] ERROR: URL=https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4, Port=443, Options=192, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:0DA907D5-1709-4B10-B627-61E289FD7149";
DateTime = "20130405062159.643000+000";
HostName = "xxxxxxxx.xxxxxxx.com";
HRESULT = "0x80072efe";
ProcessID = 4260;
StatusCode = 600;
ThreadID = 4200;
DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Successfully sent location services HTTPS failure message. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error sending DAV request. HTTP code 600, status '' DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP('https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4') failed with code 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
my query is how some of the clients are communicating primary site server for updates even though the boundary details are properly configured and Secondary site is configured with sup. Also need to know (as per the log "DataTransferService.log")how
come the clients are communicating SSL port for updates. Plz help in resolving the issue.

Hi Kent,
Thanks for the reply.
Primary and secondary sites are connected over WAN and we have around 2000 clients which are reporting to Secondary site.
Considering the WAN bandwidth utiliztaion and number of clients on secondary site we have configured the SUP role.
Not all the clients are with the above error message around 40%-50% of the clients are with above stated error message.
Plz let me know what is the error message indicates and do we need to reffer any other logs for indepth analysis.
Locationservices.log is with fluctuating connectivity
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
how come the clients are communicating SSL port for updates. Plz help in resolving the issue.

SCCM 2012 internet based client mgmt installation in Lab

Hi All
Is it possible to install sccm 2012 WITH INTERNET BASED CLIENT MGMT IN lAB???

Hi,
Short answer: Yes, you can
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 64 Bit Client

Does SCCM 2012 have a 64 bit client? I think that 2007 was only 32 bit but has that changed?

Yes - ConfigMgr 2012 have a native 64 bit client. And you are right - in ConfigMgr 2007 there was only a 32 bit client

SCCM 2012 root domain client management from child domain

Similar Messages

Maybe you are looking for