SCCM 2012 software distribution not able to distribute content for chrome

Hi I am using sccm 2012, need some advice, thanks! I tried to deploy chrome exe to a xp pc but the PC software centre shows downloading for very long time, more than a few hours. I created a 64bit chrome for a win7 pc and deployment also not working, it
just failed. Then I downloaded a msi installer to deploy to an xp pc, the downloading also takes forever, I checked the distribution content, it's failed. I then created a DP group and add the single DP into it. but still not working. I did the work before
for firefox and it did work before. Not sure what happened. Not sure where to check the log for software distribution, any advice please?thanks!
Thanks and best regards, -- KF

Thanks, Narcoticoo!your advice is helpful!
So, does it mean I can use xxxx.exe /install /silent for all other exe installers? And to find out the detection method, do I have to install the exe on a local pc to find out the actual directory it will install it (Then uninstall it)? and xxx.exe /uninstall
is for uninstallation? Can I create a bat file like chrome-install.bat to have one line like "ChromeSetupStandAloneSetup.exe
/silent /install " as the the actual installer? Why there is a package option below application? it confused me ....
Thanks!
Thanks and best regards, -- KF

Similar Messages

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

Not able to access content for Mobile course

Hi Team,
I am trying to access content available for open SAP course for mobile Course: Introduction to Mobile Solution Development for the Enterprise
But once i click on a Video link, it directs me to this below page. Also not able to view any PDF.
Obviously, not even able to download.
Not sure if this is the right place to raise this question. So mentioning SCN Support
Regards,
JK
PS: I was able to view and download the contents before 12 hours.

Hi Jitendra,
The hosting server for pdf's is not working at the moment and the server technical team is currently working on the issue.
You can still stream the videos but this might not be suitable for you at this time.
Apologies for any inconvenience caused. The technical team have advised us that this issue will be resolved shortly so please check back later.
Kind regards,
Claire

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

Not able to install onedrive for business, keeps telling its already installed but its not (W7)

not able to install onedrive for business, keeps telling its already installed but its not (W7)
after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
it keeps telling me it is already installed.
I think some settings are still there from the old install.
how can I remove them or force the reinstall

yeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13

Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

Hi,
Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign 2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
IP for communicating with the CAS server which is in a different domain.?
Details:
1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
Thanks
Rajesh Vasudevan

First, it's not possible. You cannot attach a primary site to an existing CAS.
Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
no functional differences but does add complexity, latency, and additional failure points.
Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
for trouble IMO.
Jason | http://blog.configmgrftw.com | @jasonsandys

Not able to create index for organization

in transaction ses_admin, i created an index for business object BAS_BUPA of type 1,ie individual account.
However, i am not able to create index for BAS_BUPA of type 2
It says "No entry in table SIC_INDEX_MAIN for index object BAS_BUPA and index 2"

hi,
The index is for Business Partner, so it includes both Persons and Organizations. So, only one index needs to be created for both.
The functioning is correct, just that i missed it.

Not able to put reason for rejection at sales order level.

Hi Gurus,
I have an issue where I am not able to put reason for rejection for line item in sales order. It gives error as please delete the follow on document purchase order line item number 10. I have already deleted the line item in purchase order. Then tried but did not work. Tried by deleting the purchase requision item also but it did not work.
Tried to undelete the item from PO and then again tried to put reason for rejection but it could no worked out.
Please guide me what can be the solution.
Regards
Vinod

As far a I understand you created PO for line item
So first check whether GR is reversed or not for PO
Then mark this line item for deletion in PO and then in PR
Check if you have created any billing document for PO if so reversed that invoice
Also check if you have created any delivery for the Line item in sales order if yes then reversed the same
If you have Sales order related Billing, and if you have done billing reverse the same
If you have Delivery related Billing, and if you have done billing reverse the same
After reversing all docuemnts created for Sales order then only try to reject the line item
You can check table VBFA for document flow

Not able to do GR for STO delivery with packing.

Hi All,
Hi All,
I am not able to do GR for STO delivery.
I am getting the following error:
Data for creating a delivery is incomplete (Vendor)
Message no. M7279
Business scenario:
STO between two plants of same company code with packing material.
Sales Org(Supp)-4444
Sales Org(Rec)- 3333
Plant(Supp)-2003
Plant(Rec)-2002
ME21N->VL10B->PGI->VF01(Proforma)->MIGO w.r.t outbound delivery(error)
Note: PGI with packing material-separate line item generated for packing material-movement type for main material-641 and for packing material-601)
with regards
Azeez.Mohd

Hi,
When the stock is going to be moved between two plants or two storage locations that are under single company code called as stock transfer order business process. Receiving plant raises the purchase order with supplying plant; supplying plant delivers the goods to the receiving plant by raising sales order.
Config Steps
Create Vendor: Transaction code: XK01
Assign Plant to Vendor
Go to change mode of Vendor [XK02]
Specify Vendor number that we created in the previous step
Define shipping data for plants
Create material by maintaining u201CPurchasingu201D view: Transaction code: MM01
Extend the material from XXXX to YYYY plants
As we are extending material from plant XXXX into YYYY plant, system copies all the data into the new plant.So that we have to change the delivering plant in delivering plant field as YYYY in Sales: Sales organization data 1 view.
Create Purchase order: Transaction code: ME21N
Activities due for Shipping (Purchase order fast display): Transaction code: VL10B
Display stock in transit: Transaction code: MB5T
Goods receipt: Transaction code: MIGO
Stock movement types: INTRAand INTER
 INTRA
Stand order type (Document type) = UB
Delivery type = NL
Determination of document type:
Supplying plant + Receiving plant = UB
Supplying plant + UB = NL
Movement types:
                  Issuing plant Receiving plant
Single step    647                        101
Two step        641                        101
 INTER
Standard order type (Document type) = NB
Delivery type = NLCC
Determination of document type:
Supplying plant + Receiving plant = NB
Supplying plant + NB = NLCC
Movement types:
                        Issuing plant Receiving plant
Single step              645               101
Two step                 643                101
PBXX is the Gross price condition type for Stock Transfer Order
Vendor = Supplying plant
Customer = Receiving plant
NOTE: In single step method updations takes place in both plats simultaneously.
In two-step method updations should takes place manually.

Not able to do GR for PO's , Delivery Completion Indicator Not Ticked

Hi ,
In SRM 5.0
Users Not able to do GR for PO's eventhough Delivery Completion Indicator Not Ticked , having Confirmation Roles
Either the PO is not appearing in the List or when they click the confirmation icon , the screen is not taking to the next screen to enter the quantity.
What all must be the probable reasons.
Thanks & Regards,

Hello,
You can check following things,
1. User in the PO should be correctly assigned in org without any sync errors(check users_gen)
2. Check in PO if the Confirmation/services performed tick is assigned properly.
3. Check if the PO in SRM and backend is correctly synchorinzed with PO in Ordered status.
4. Finally if there is any existing confirmation for the PO, then they can create the next confirmation only after the earlier conf is synchronized with backend, which means it would depend upon your schedule of clean_reqreq_up report.
Regards,
Sanjeev

My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)

My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)

Try disconnecting the headphones and then adjusting the volume, does it say headphones?
There might be something in the headphone jack, maybe lint, dirt, or something else in there.
Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers

TS1292 i have credit in my account but not able to redeem it for purchasing

I have credit in my account but not able to redeem it for ourchsing

I have credit in my account but not able to redeem it for ourchsing

Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

Thank you. That solved the problem. So simple but it wasn't intuitive to me.

Not able to see published task and not able to reset version for the task

Hi,
Created a task ,validated,by selecting the task clicked Publish button in tools to publish the task.
In Client Application(Callcenter) navigated Administration-Business Process->Task Deployment
Here not able to see published task to activate.
Tried twice by copying record but not able to see.
I am not able to reset version for the task created.
Could you please let me know how to overcome these.
Using sample database of siebel8.0.0.5
Thank you

Hi Dude,
To trobleshoot this you need to do the following steps:
1) cross check in tools the srf which you are compling , the same srf should be used by the clent application i.e. call center
2) the secound thing is in the Siebel tools there is a toolbar at the top, from where you have published the task, there beside you will find a button called Revise you can revise you task, first select task and click revise button.
3) and also you remember a task which you create is validated by right clicking the task record and choose validate.
4) remember, a task which you create should be registered same as like responsibilities, by navigating to Administration-Applicatrion > Task
Register the task with same name as you have used in Siebel Tools.
As, for best practices after creating a task first validate it, then after register it in Administration-Applicatrion > Task , then after toolbar there is a button callled publish and activate click that one .
and that's All.
Regards,
Neeraj Verma

SCCM 2012 software distribution not able to distribute content for chrome

Similar Messages

Maybe you are looking for