SCCM 2012 - Software update error

Hi all,
I need some help on the below error, I get the below error when ever I try to sync the Microsoft website. Seems I have tried with all the credentials which has open access on the proxy server. But still I get the below error. I have reinstalled WSUS role
and configured SUP point so many times. Is it a configuration problem on the SCCM server or proxy server. Can anyone help me under stand the below error
Also I don't know 65.55.163.221:443 which is no where related to my network
Error:
Sync failed: UssCommunicationError: WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection
failed because connected host has failed to respond 65.55.163.221:443~~at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
Regards, Pratap

Sync of updates via proxy can be difficult sometimes. Websense can be the worst. That's why I ALWAYS get my Primary Site Server whitelisted though the proxy - no authentication and no filtering.
That usually gets rid of this kind of issues.
Note you still have the configure the proxy settings - you just don't need credentials.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

SCCM 2012 Software updates

Hi All,
We have SCCM 2012 R2 Server, We have been using more than a years ,
Now im facing crazy issues .
1.every month we using sccm server for deploying windows patches .
2.before patching we set maintenance schedules for device group.
3.patch deployment is working fine without any issues and we get the success 100 % compliants report in all the server .
Note:- but after one or two months later in Monitoring-->deployment tab-->its showing only few machines success results or deploying again old package''
this process is keep on rotating in all the deployment .
how to resolve this issues.
Regards,
Velu M

Hi,
You could try to initiate Software Updates Deployment Evaluation Cycle action from a problematic client, then check CIAgent.log, StateMessage.log to see if there are any helpful information.
Reference:
SCCM state messaging–in depth:http://blogs.msdn.com/b/steverac/archive/2011/01/07/sccm-state-messaging-in-depth.aspx
You could also follow the steps in the blog below to check state messages in WMI.
Software Update Compliance Reports – Detection State Unknown
http://blogs.technet.com/b/configmgrdogs/archive/2013/11/07/software-update-status-reports-detection-state-unknown.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Expiration and Supersedence within an SCCM 2012 Software Update Context

In SCCM 2012 I have put a process together where I wait till the Friday after Patch Tuesday to begin prepping for production Software Update deployments that will take place that following week, beginning on the first Sunday following Patch Tuesday. I wait
till Friday for preparation, because the thought is if I wait till then and synchronize the patches to grab the metadata later in the week, I will not pick up any patches that may have already been superseded or expired that were just released just days before
on Patch Tuesday.
My question is, is this a good practice? I have just been doing it this way for a while, but not sure it this is considered a best practice or what. I guess I am just looking for confirmation and also any other techniques, methods, and\or processes that
may serve me better.
If anyone can offer any input that can give me better insight, I would greatly appreciate it.
Thanks

So how does it work if I sync on Patch Tuesday after the patches are released, and build my packages and deployments right after that and deploy them to the clients and then I re-run another synchronization say on that following Thursday or Friday and find
out that one of those patches that I deployed has already expired or superseded?
Thanks Torsten

SCCM 2012 Software Update Group Statistcs showing wrong Asset Count

Under Software Update Groups in the summary tab the statics section shows total asset count: 5. I only have this group deployed to only one collection with 1 machine.
I have a second Software Update Group in the summary tab the statics section shows total asset count: 5. I only have this group deployed to only one collection with 3 machines.
The two collection have only one machine in common.
I tried to run a summarization but these numbers are not updating.
where does the asset count come from and how do I get it to display correctly?
Thanks,

The asset counts shown in the console for software groups are not specific to any collection or deployment. If you want numbers specific to a collection, you need to use reporting or a console query.
Jason | http://blog.configmgrftw.com

SCCM 2012 software update point issue

The issue of "detection state unknown" (to simplify, use 'unknown' as below) patch report status
The OS in our environment are mainly Win 7 - 64 bits and XP. The typical condition of "unknown" report patch status is as follows:
1) Workstation with Win 7 - 64bits: "unknown" patch report status is appearing
in MS patches for Win XP or 7 - 32bits
2) Workstation with Win XP: "unknown" patch report status is appearing
in MS patches for Win 7 - 32/64bits
The "unknown" problem appears even client scan is completed in the workstation (see the second picture). The problem may be caused by application bug or configuration. Please
kindly follow up and further seek support from Microsoft if applicable.

WSUS was installed and configured and work fine a few monthes ago as a part of the first try to install SUP before aplying SP 1 to SCCM.
Both SCCM and WSUS are installed on the same server.
now we want to deploy all updates from SCCM SUP, and the installation failed.
after researching online, uninstalled WSUS completely from the SCCM server, and removed SUP from the Site and rebooted the server.
installed WSUS 3.0 SP2, when initial config of the WSUS popped up i canceled it, the only config i made
is at the installation wizard, set the port to 8530, folders location and internal DB.
>> i am able to open the WSUS console and connect to the "localhost" but no settings
are configured.
installed update 2734608, reboot.
Installed SUP.
and here we are.

The update "MacBook Pro (Mid 2012) Software Update 1.0" can't be applied

When trying to update my new Macbook Pro with Retina through Apple's software update application, I get the error:
The update "MacBook Pro (Mid 2012) Software Update 1.0" can't be applied
The update could not be expanded, and may have been corrupted during downloading.
I've already went through the process twice to download this update.

Same type of error, but getting 90% downloaded and error message that the update cannot be saved. But it then goes to the screen to apply, but with 90% only - no instructions that it will only download 90% and the rest will come during the update - not going to apply.

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

SCCM 2012 Client Installation Errors & Solutions

Hello,
Can we figure out all SCCM 2012 Client installation errors and solutions ?
Cheer's Up
Best Regard's Krishna

Hi,
Error codes are easiest looked up in CMtrace, making one general list of errors and solutions is hard, in many scenarios there are different solutions to an error based on the infrastructure and differences between environments
Error lookup in cmtrace.
http://blogs.technet.com/b/configmgrdogs/archive/2012/06/07/trace32-exe-cmtrace-exe-hidden-features.aspx
Here is a blog on troubleshooting client installations issues, it is for sccm 2007 but a lot of the content is still valid.
http://blogs.technet.com/b/sudheesn/archive/2010/05/31/troubleshooting-sccm-part-i-client-push-installation.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

TS3694 software update error (1015) what is this?

software update error (1015) what is this?

Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Nokia Software Updater -- Error 1402.Could not ope...

H,
When I try to install the Software Updater for the first time to update my Nokia 6500c phone, I receive the following error message about 57% during the install process. I checked my permission keys in the registry, and they seem to have all the correct Admin permission.
Any suggestions?
Product: Nokia Software Updater -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DSOControl.4.0\CLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks.
Matt

Hi,
It looks like you do not have access to the registry key mentioned i.e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional Components\IMAIL.
This might be due to the fact that you may not be added to the Administrators group or the registry key has been denied access explicitly to a group that you may be part of.
People in my network setup were facing the same issue, and we fixed the same using Microsoft's "subinacl" tool. You can follow the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
ii. subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f (Hit Enter)
You should see some processes happening on your screen. After the process ends, retry the update operation you were originally trying to perform. Hopefully, it should succeed now.

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

SCCM 2012 - Software update error

Similar Messages

Maybe you are looking for