SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

Similar Messages

3005pr software will not install on Windows 8

Hi,
I am using a 3005pr port replicator on a Spectre XT 4010nr laptop running Windows 8
I was rupdating the software for the port replicator and the install prompted me to uninstall the previous version and I said yes. It had to reboot to complete the uninstall so I rebooted systems.
Now when I try to install the port replicator software I get the error:
"A previous uninstall of HP Port Replicator Software is not yet complete. Please reboot your computer and run this installer again to installation."
I've rebooted, powered off, confirmed the port replication software is not installed through ARP, confirmed the device is not listed in Device Manager. But still see the above error any ideas how to reinstall the software?
Thank you

Try the Windows Installer Cleanup Utility:
http://www.techsupportforum.com/attachments/windows-xp-support/6696d1147451985-cannot-uninstall-prog...

SCCM 2012 R2 MP not installing

Hope someone can assist me. I have a SCCM 2012 R2 Primary server on Windows 2012 and installed some site Servers with DP's and MP's installed on Windows 2008.
2 of the MP's have failed. I have tried to reinstall but can not.
Checking the mpmsi.log I get the following error.
[14:54:05] Successfully created virtual directory application
[14:54:05] Enabling BITS
[14:54:06] @@ERR:25006
MSI (s) (90!EC) [14:54:06:876]: Product: ConfigMgr Management Point -- Error 25006. Setup was unable to create the Internet virtual directory CCM_Incoming
The error code is 80090016
Error 25006. Setup was unable to create the Internet virtual directory CCM_Incoming
The error code is 80090016
CustomAction CcmCreateIISVirtualDirectories returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (90:64) [14:54:06:909]: User policy value 'DisableRollback' is 0
MSI (s) (90:64) [14:54:06:909]: Machine policy value 'DisableRollback' is 0
Action ended 14:54:06: InstallFinalize. Return value 3.
I have reinstalled BITS,IIS and MP. I have stopped the Task Scheduler and renamed the folder and restarted the server.
Basically short of reloading the server I have done everything I found on the internet.

Duplicate post of
https://social.technet.microsoft.com/Forums/en-US/b7c9f09a-0fe1-4d8d-b6cb-5182ebaac364/mp-will-not-install?forum=configmanagerdeployment
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 software distribution not able to distribute content for chrome

Hi I am using sccm 2012, need some advice, thanks! I tried to deploy chrome exe to a xp pc but the PC software centre shows downloading for very long time, more than a few hours. I created a 64bit chrome for a win7 pc and deployment also not working, it
just failed. Then I downloaded a msi installer to deploy to an xp pc, the downloading also takes forever, I checked the distribution content, it's failed. I then created a DP group and add the single DP into it. but still not working. I did the work before
for firefox and it did work before. Not sure what happened. Not sure where to check the log for software distribution, any advice please?thanks!
Thanks and best regards, -- KF

Thanks, Narcoticoo!your advice is helpful!
So, does it mean I can use xxxx.exe /install /silent for all other exe installers? And to find out the detection method, do I have to install the exe on a local pc to find out the actual directory it will install it (Then uninstall it)? and xxx.exe /uninstall
is for uninstallation? Can I create a bat file like chrome-install.bat to have one line like "ChromeSetupStandAloneSetup.exe
/silent /install " as the the actual installer? Why there is a package option below application? it confused me ....
Thanks!
Thanks and best regards, -- KF

Laserjet 1320 Toolbox software will not install on Windows 7

I bought this 1320 for my xp and the toolbox worked fine. Bought a Windows 7 and the same software fails to install. Running setup and it says there is some kind of java error. i have java installed, use it all the time and it works fine. I try to install the software using other 'exe' or 'setup' files and it tells me to use the windows drivers. The printer works fine, but I want the toolbox to tell me ink level.
update: I finally found the "ini" setup and windows 7 is not supported. So, is there anyway to get new s/w for W7?

If you have a 1320n, then the easiest way to check your ink level would be the Embedded web server (EWS). Put your IP address into your browser and this will take you to the EWS. From there you will be able to check the ink levels of your printer.
Otherwise, toolbox is not available for the windows 7 OS.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Lj cm1415 All-in-One printer software will not install in Windows XP

Have windowsxp and no problem with my printer and scanner, lj cm1415fnw, then the scanner stopped working.
my IT guy uninstalled and now we can't install. Error message, does not support this windows software?
It did before, Help please
thanks Terry

Hi Terry,
Try installing the latest drivers below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-85658-7&cc=us&dlc=en&lc=en&...
As well ensure you have full administration rights to install the software, a such may appear due to insufficient permissions of your user account.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

SCCM 2012 Client agent not installing

Hi,
We have some client machines which has Client as "No" in the SCCM console. The ccmsetup.log file of these machines shows repeated entries like:
Download Update: 56283664 out of 66797088 bytes transferred.
ccmsetup.log file of another machine shows entries as below:
Download Update: Copy job has been queued.
I repaired a client machine using "Install Client" and monitored the ccmsetup.log file but it does not show any entries for repair or re-installed as it is downloading updates for a long time.
Also found the below error messages in ccmetup log file:
File 'C:\Windows\ccmsetup\MicrosoftPolicyPlatformSetup.msi' doesn't exist.
File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' doesn't exist.File
'C:\Windows\ccmsetup\SCEPInstall.exe' doesn't exist.
File 'C:\Windows\ccmsetup\client.msi' doesn't exist.
Please guide on how to troubleshoot this client issue.
Thanks & Regards,
Lorin
Regards, Lorin Davis

This issue can be related with BITS settings. It can occurs if the BITS throttling is enabled on the client machines.
https://abdujalil.wordpress.com/2014/03/22/configmgr-client-push-installation-issue-download-transfer-take-long-time/
http://www.windows-noob.com/forums/index.php?/topic/7473-configuration-manager-2012-sp1-client-install-taking-hours-to-install/
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

HP Scanjet g4050 software does not install under Windows 7 ultimate

Hello
During installation of the full software the file scan.msi is "not found", although it is present in the directory.
What is wrong with this file? Tried the installation several times
Installation file: setup_full_G4050_14-5.exe, downloaded from the HP support site
OS Name: Microsoft Windows 7 Ultimate
Version: 6.1.7600 Build 7600
regards
Ab
This question was solved.
View Solution.

Try running Microsoft's program uninstall and install troubleshooter. Post your results here please. Here is a link to the Microsoft web page that explains the troubleshooter's function.
You can also download the full software package via an FTP interface.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hp Solution Centre software will not install on windows 8.1

I have just replaced my old HP Laptop with a new HP Pavilion 15 Notebook PC and have managed to install my Hp Photosmart C4780 printer but am unable to get the software for the Hp Solutions to install. I have downloaded the file from the Hp site and it states it should work on Windows 8.1 but it extracts the files and then does nothing . I have run print and scan doctor about 10 times now but after many frustrated hours no joy. Worked perfectly on Windows 7 premium but doesnt want to know with WIndows 8.1

Hi,
Carefully follow the steps below and check if that may resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans.
Click on Real time scanning and then on Turn Off.
select Never and confirm by clicking the Turn Off button.
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Reboot your PC
8. Run the installation file and check for any difference.
9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
Please let me know of any progress,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photosmart A software will not install on Windows 8.1

I have a Photosmart A536 printer and Microsoft Surface Pro 3 running Windows 8.1-x64.
The printer is connected and I see a CD drive HP_A530_series with a setup program. When
I run it I get a dialog telling me to go to the HP download site for my printer. I went there and
downloaded the driver for my O/S, (A530_140_301.exe. The file runs but all that happens is
the same dialog saying "please download the driver from the HP website". I have tried
redownload, reboot, run as admin, run in compatibility mode.
I went to this forum and found the suggestion to download the printer installation wizard,
hppiw.exe, and install and run it. I did so and it ran and said it was looking for devices and
then it exited with no action.
Please advise.

Hi @MKairys
Please look at the discrepancy between the compatibility listed, and the description of the file;
Description
Windows XP x64/Vista 64/Mac OS X v10.4-v10.5: Download includes HP Photosmart Software Driver and support links for product. Windows XP 32/Vista 32/Windows 7 32 and 64: No software download for printer. Printer includes HP Quick Connect, which installs when you connect the printer to your computer.
^^ This makes no mention of Windows 8 or 8.1
Compatibility:
Microsoft Windows 8 (32-bit)
Microsoft Windows 8 (64-bit)
Microsoft Windows 8.1 (32-bit)
Microsoft Windows 8.1 (64-bit)
Microsoft Windows 8 Enterprise (32-bit)
Microsoft Windows 8 Enterprise (64-bit)
Microsoft Windows 8 Pro (32-bit)
Microsoft Windows 8 Pro (64-bit)
Microsoft Windows 8.1 Pro (32-bit)
Microsoft Windows 8.1 Enterprise (64-bit)
Microsoft Windows 8.1 Enterprise (32-bit)
Microsoft Windows 8.1 Pro (64-bit)
A530_140_301.exe
Perhaps this would be helpful; Problems printing from Surface can be caused by hardware issues like disconnected cables, software i... I have a feeling though that this may loop too, it says it is compatible then advices you install the free driver, and takes you back to the HP website - A530_140_301.exe. I feel your pain, I am going in circles!
I don't think there actually is a driver for 8.1. You could try an alternate print driver; How to Assign Alternate Print Drivers in Different Versions of Windows.
Please let me know what happens if you try an alternate print driver.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

SCCM 2012 SCEP will not apply to Windows 7 32 bit machines

Here is the log from EndpointProtectionAgent.log
<![LOG[start to send State Message with topic type = 2001, state id = 2, and error code = 0x00000000]LOG]!><time="13:36:55.935+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1"
thread="10684" file="epagentimpl.cpp:1326">
<![LOG[Start to send state message.]LOG]!><time="13:36:55.935+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentutil.cpp:1246">
<![LOG[Send state message successfully]LOG]!><time="13:36:55.959+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentutil.cpp:1248">
<![LOG[Failed to get EP event code under registry key SOFTWARE\Microsoft\CCM\EPAgent]LOG]!><time="13:36:55.959+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="2" thread="10684"
file="epagentimpl.cpp:1351">
<![LOG[Failed to get EP event message under registry key SOFTWARE\Microsoft\CCM\EPAgent]LOG]!><time="13:36:55.959+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="2" thread="10684"
file="epagentimpl.cpp:1356">
<![LOG[Save new state 2, error code 0, detail message '' to registry SOFTWARE\Microsoft\CCM\EPAgent\State]LOG]!><time="13:36:55.961+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1"
thread="10684" file="epagentimpl.cpp:229">
<![LOG[File C:\Windows\ccmsetup\SCEPInstall.exe version is 4.3.220.0.]LOG]!><time="13:36:55.998+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684"
file="epagentutil.cpp:519">
<![LOG[EP version 4.3.220.0 is already installed.]LOG]!><time="13:36:55.998+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentutil.cpp:232">
<![LOG[Expected Version 4.3.220.0 is exactly same with installed version 4.3.220.0.]LOG]!><time="13:36:55.998+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684"
file="epagentutil.cpp:251">
<![LOG[start to send State Message with topic type = 2001, state id = 3, and error code = 0x00000000]LOG]!><time="13:36:55.998+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1"
thread="10684" file="epagentimpl.cpp:1326">
<![LOG[Start to send state message.]LOG]!><time="13:36:55.998+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentutil.cpp:1246">
<![LOG[Send state message successfully]LOG]!><time="13:36:56.006+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentutil.cpp:1248">
<![LOG[Sending message to external event agent to enable notification]LOG]!><time="13:36:56.006+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684"
file="epagentutil.cpp:914">
<![LOG[Sending message to endpoint ExternalEventAgent]LOG]!><time="13:36:56.006+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentutil.cpp:1146">
<![LOG[Sending message to external event agent to execute all on demand actions.]LOG]!><time="13:36:56.011+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684"
file="epagentutil.cpp:988">
<![LOG[Sending message to endpoint ExternalEventAgent]LOG]!><time="13:36:56.011+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentutil.cpp:1146">
<![LOG[Save new state 3, error code 0, detail message '' to registry SOFTWARE\Microsoft\CCM\EPAgent\State]LOG]!><time="13:36:56.021+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1"
thread="10684" file="epagentimpl.cpp:229">
<![LOG[Handle EP AM policy.]LOG]!><time="13:36:56.021+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="fepsettingendpoint.cpp:183">
<![LOG[Apply AM Policy.]LOG]!><time="13:36:56.021+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684" file="epagentimpl.cpp:1209">
<![LOG[Create Process Command line: "c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe" "C:\Windows\CCM\EPAMPolicy.xml".]LOG]!><time="13:36:56.061+240" date="05-02-2014" component="EndpointProtectionAgent"
context="" type="1" thread="10684" file="epagentutil.cpp:607">
<![LOG[Failed to create process c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe with error = 0x80070002.]LOG]!><time="13:36:56.061+240" date="05-02-2014" component="EndpointProtectionAgent" context=""
type="3" thread="10684" file="epagentutil.cpp:621">
<![LOG[Failed to apply policy with error 0x80070002, retry number : 1 after 60 second.]LOG]!><time="13:36:56.061+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684"
file="epagentimpl.cpp:707">
<![LOG[Endpoint is triggered by WMI notification.]LOG]!><time="13:36:56.439+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10212" file="fepsettingendpoint.cpp:154">
<![LOG[Endpoint is triggered by message.]LOG]!><time="13:36:57.305+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="212" file="fepsettingendpoint.cpp:58">
<![LOG[Create Process Command line: "c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe" "C:\Windows\CCM\EPAMPolicy.xml".]LOG]!><time="13:37:56.064+240" date="05-02-2014" component="EndpointProtectionAgent"
context="" type="1" thread="10684" file="epagentutil.cpp:607">
<![LOG[Failed to create process c:\Program Files\Microsoft Security Client\\ConfigSecurityPolicy.exe with error = 0x80070002.]LOG]!><time="13:37:56.064+240" date="05-02-2014" component="EndpointProtectionAgent" context=""
type="3" thread="10684" file="epagentutil.cpp:621">
<![LOG[Failed to apply policy with error 0x80070002, retry number : 2 after 60 second.]LOG]!><time="13:37:56.064+240" date="05-02-2014" component="EndpointProtectionAgent" context="" type="1" thread="10684"
file="epagentimpl.cpp:707">
Any thoughts?

Hi,
Since "0x80070002 = The system cannot find the file specified." this would suggest that any AV software or application is blocking the setup to continue. Do you have another AV software installed?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Portege M750 - PCI controller software not installed on Windows 7 64bit

Hi, had an upgraded SSD for my machine so decided to do a fresh install of Windows 7 64bit and now I have and error saying PCI controller software is not installed, tried windows update no luck - any ideas please?
Thanks, Peter

OK cool advice - thanks it is from Intel and is
0x2A44 Chip Number: Mobile 4 Series Chipset
Chip Description: Intel Management Engine Interface
Notes: ftp://ftp.vaio-link.com/PUB/VAIO/ORIGINAL/ME DRIVER INTEL 4.0A _ 4.0.0.1105.ZIP
Downloaded, installed and working - thanks for the quick advice!
Peter

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

Manage SCCM 2012 clients in DMZ (OS Deploy, Windows updates) via DP/MP

Hi,
We ’d like to manage (=OS Deploy, Packages,Windows updates) Windows clients (Windows 2008/2012 R2 servers for now, about 20 of them) in a DMZ (= different domain).
There is this article
https://nikifoster.wordpress.com/2011/01/31/installing-configmgr-clients-on-servers-in-a-dmz/ which explains what to do … in 2011. Since then lots of things are changed I guess
Before I dive in, I’d need to have an overview + do some administrative tasks (like asking for firewall accesses).
Current setup DMZ:
Our SCCM 2012 R2 server is on a Windows 2008 R2 OS
Client communication is done via HTTP (not HTTPS)
An extra physical Distribution point is setup (only DP, nothing more) in our current domain
A new Windows 2012 server is setup in the DMZ which should host the DP and probably management point (since it should manage the clients over there)
There are clients in DMZ that are currenlty managed by SCCM 2007 but
this server will be phased out, these client have:
Correct sccm functionality
Correct DNS resolution
My steps/questions, please comment:
Add the DMZ ip range to SCCM 2012 boundary as “DMZ”
Add the network access account to be able to deploy as well clients as distribution point in DMZ
In the DMZ accesses on firewall for server VLAN have to be asked
When we have a distribution point and communication is “HTTP only” then http (port 80) from DMZ to sccm server should suffice, correct? Or are
extra firewall openings needed for management point access/packages and windows updates sync?
Now the sccm clients will be deployed to the servers in DMZ: deploy SCCM clients to hosts in DMZ, how this should be done: we connect a console to the SCCM-server in the DMZ then deploy the discovered clients?
OS Deploy should be made available, but no dhcp is available in DMZ and it is not an option either, therefore we would boot from an ISO then enter an ip (or pre-enter it so there is already filled in an ip?). So tasksequences/deployments
for servers in DMZ, where are they configured/deployed then? Via console access on DMZ management point or can we deploy on our domain SCCM management point (not in DMZ) and it will be synced to the DMZ management point? Not clear
Selective sync of software to this distribution point (howto? not sure), we don’t need any Windows 8 software/drivers to be synced.
Thanks for your input!
J.
Jan Hoedt

No comment;
I think you mean the client push installation account and the site system installation account;
More ports are required, see site server > distribution point and distribution point > management point from the provided link;
The console will always be connected to your primary site server. The client will be pushed from the primary site server and it will provide the initial files. The other files will be downloaded from the local distribution point;
The task sequence deployment will be just like a normal taks sequence deployment. The only difference is the location of the server;
Only the content that's distributed to the distribution point in the DMZ will be available on that distribution point.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Windows Updater Not Installing and Troubleshooter Wizard Is Not Working???

I am in need help desperately!
        I have tried to install the Windows 7 latest update since late October 2014 and every time that I have tried it has failed, this is messing with certain programs to either not run such as my Troubleshooter,
leaving me unable to fix the issue, and making my computer to run poorly as well as when I am on Firefox unable to load pages, do downloads, watch movies & TV, or watch videos on You Tube without having to move the mouse around to keep it running and just
freeze the picture on the You Tube and Xfinity but the sound keeps playing though. I am unable to run the Troubleshooter Wizard at all; gives me an error code 0x80131018. I have gone to the forums to find a solution I tried everything possible. Such
as trying to do all the maintenance; disc clean ups, compressing files to save on space, checking the disc drives for errors, defragmenting the drives, try to use the Fix It (MicrosoftFixit.malware.RNP.1343648269423620.1.1.Run, as well as: MicrosoftFixit.ProgramInstallUninstall.RNP.1343648269423620.2.1.Run,
as well as: MicrosoftFixit.wu.FISC.1341772369343897.1.1.Run,   and: MicrosoftFixit50123) all the these would not help.
        I also tried to run what information I received from viewing options from the Error Code 0x80131018 and all the HP Support Assistant and Windows Help and Support. These are some of them; SCUDownloader,
Windows6.1-KB947821-v34-x64,   HPSupportSolutionsFramework-en-11.51.0048,   HPSupportSolutionsFramework-11.51.0048,   HP CoolSense Technology - sp65424,   HP Notebook System BIOS Update (Intel Processors) - sp55068,
HP Power Manager Utility Software - sp55151,   HP On-Screen Display Utility - sp55152,   HP System Diagnostics UEFI - sp52407, and    Intel Rapid Storage Technology Driver - sp55101. All these with running the maintenance,
I also installed Boost, also ran the scans through my Norton Security, and so much more to try and fix this problem, I just can't remember everything that I tried I have been working so hard at solving this problem since of the effect of how this Windows Updater
failing at updating and Troubleshooter not working to leaving me unable to find and fix these issues.
           I am a Graphic Design Artist and I am pretty computer savvy but I am at a loss on this . If anyone has any advise on these issues please help me ASAP, I use my HP everyday and it is important for
me to have it for work purposes, concepts and so much more. My Mother got this computer for me when I graduated from college in 2012 for my graduation gift so I can do what I do.
Thank you so much for your help in trying to get this resolved without having to take it into somewhere and pay $$ that I do not have.

I recently had a similar problem - Windows 7 Ultimate. Apart from updates not installing and troubleshooters not running I started getting crashes and BSOD's
I checked that my Cryptographic services was set to auto (it was)
Press the 'Windows key" and and key "R" together   to launch the RUN box. Type
services.msc in the box and press Enter. It'll open Services Manager.
Scroll down to "Cryptographic Services" in the list. It should be set to Auto ( mine was)
I then checked my Windows updates to see when the problem started
Taking the bull by the horns I deleted the last 20 updates installed.
I restarted the computer and was amazed to find the troubleshooters working ok
I downloaded the Windows updates and installed them 5 at a time checking the troubleshooter after each batch. Everything was ok .
I can only assume the troublesome update was not re-offered or the one that installed itself was corrupt.

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Similar Messages

Maybe you are looking for