SCCM 2012 SP1 Application catalog website

Architecture:
SCCM 2012 SP1 installed on Windows 2012
Application catalog website issue----->
In SMSAWEBSVCSetup.log we found "IIS component ASP net not installed please install it.
Installlation failed Error Code:125"
whereas we have installed ASP.net already (registering ASp. net not supported please review the MS article: "http://support.microsoft.com/kb/2736284 "
Let know me know what could be the cause.

All depending on how/what order you install the IIS components sometimes it's just to reinstall IIS. To me it sounds like the .Net Framework http-activation and non-activation features are missing.
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Similar Messages

SCCM 2012 Application Catalog Website Point role Status is critical

Hi team,
In a client's SCCM 2012 R2 environment there is a Critical Icon and Status against one of two Application Catalog Website point roles. Looking at the Component status, there are no errors and all the components show as green.
Trying to find any warnings or errors in the messages for the Site System role doesnt show any errors, and I tried to reset counts but this has not changed the status.
I am not sure where to go from here. The application catalog itself works and is up. All the services are running. I am unsure as to where this error status comes from or what it pertains to.
Any advice would be appreciated.

Hi,
Please check portlctl.log and awebsctl.log to see if there is any error.
You could also check the thread below.
Symptom: Reporting Services Point Status (under Monitoring - System Status - Site Status) appears as Critical, No error messages in logs or status messages
Cause: 'Status' can be set to "2" for 'SMS SRS Reporting Point' in dbo.summarizer_sitesystem table in sql
Resolution: > Run below query:
update dbo.summarizer_sitesystem set status = '0' where SiteSystem = '["Display=\\abc.local\"]MSWNET:["SMS_SITE=ABC"]\\abc.local\' and role = 'SMS SRS Reporting Point'
> It should set the status back to 0.
> Check in console and errors should go away.
> In case if value reverts back then check below namespace in wmi of site server:
root\sms\site_pri\sms_sitesystemsummarizer
> check the value for reporting services point, ideally it should be 0, let's say it's set to 2 there as well then remove role of reporting services point.
> if entry for reporting services point goes away from both the places then it's good, you can re-install the reporting services point and it should work fine.
> Let's say if value/values doesn't get removed from sql/wmi , remove them manually via queries and then go with uninstall and re-install.
> then it should work and errors in console and common.log should go away.
https://social.technet.microsoft.com/Forums/en-US/5e0b7af6-f00c-4610-a709-f3e0e26505be/sccm-2012-monitoring-site-status-reporting-services-point-status-critical?forum=configmanagergeneral
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 SP1 Beta Site System Roles Installation issues

My apologies if this isn't the correct place to post this, but I didn't see any SCCM 2012 forums to post this. If there is a better place for this post, please direct me to the proper location. In the meantime this is my scenario:
I am currently evaluating SCCM 2012 for our company. I have installed SCCM 2012 SP1 Beta on a test server running Server 2012 and SQL 2012. I am testing its ability to manage Windows 8. The server is a member of our company domain. I have enabled Active
Directory Forest Discovery and CM has detected our forest and domain and set up boundaries automatically.
I am trying to add the Application Catalog Web Service and Website Roles. When I start the wizard I get exclamation marks next to Active Directory forest and domain fields in the wizard. It shows our proper forest and domain names but won't proceed
because it insists that the FQDN for my forest/domain is invalid. If I enter any other forest/domain name (e.g. yahoo.com, google.com, help-me.com) the exclamation marks clear and the wizard will proceed. SC seems to recognize our forest/domain name and
denies it. Adding different suffixes (e.g. .net, .org, .local) changes nothing. I've even flipped our forest-domain name (e.g. "a-b.com" to "b-a.com": we have a "-" in our name) and it STILL denies it. If I add a prefix to the forest/domain name, the
wizard is happy and lets me proceed (e.g. "domain.a-b.com") Did I miss something in initial setup? If this is a bug in the SP1 beta, how do I let anyone know about this? Any help/suggestions would be appreciated. Thanks.

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2. We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012. The deployment went as
expected. Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP. I am afraid to find out what time we are looking at for remote DP's.
The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3. We are using the same package source files. Previous to a successful deployment we were
seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment? Our previous deployment time for office was a little over an hour (not five hours). Any suggestions where to look to improve
the deployment time?
I am expected to deploy this in one week and have been working on these issues for weeks.

I see now that you are using a combination of scripts and ConfigMgr package/program.
The AppEnforce.log file is for use with the new ConfigMgr Application model.
Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
Office 2013.
This is how you do it
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Deploy Windows 8 To Go through SCCM 2012 SP1

First a little backgroud:
I have SCCM 2012 SP1 with MDT 2012 Update 1 integrated. I am using an MDT UDI task sequence to deploy windows 8 and it works perfectly. My Windows 8 image is fairly thin (only containing OS updates and C++ runtimes), and I am using the MDT database
and an MDT task sequence in SCCM 2012 to dynamically set a list of SCCM Applications to install as well as settings based on location.
Now I want to get Windows To Go provisioning working in SCCM 2012 SP1. I had a powershell script that preparied the drive and applied a thick image (including office and other apps) to it then updated unattend.xml with a computer name and the domain join
info. That worked for me however I'd like to levarage the dynamic task sequence that I described above to build these To Go sticks the same as my other Windows 8 machines without having to keep updating the thick image evertime something changes.
There isn't much info out there that Iv'e found on setting up SCCM 2012 SP1 to provision windows to go here are the two that I have found
http://ixrv.blogspot.com/2012/10/provisioning-windows-8-to-go-with.html
http://technet.microsoft.com/en-us/library/jj651035.aspx
I followed the instructions in the first link and was able to run the Windows to Go Creator program and apply the prestaged wim to the USB stick. I rebooted from the USB stick Windows PE started and started to run my task sequence then it errored out on
the apply image step. At this point it occured to me that the MDT SCCM task sequence was probably not setup for prestaged media and or Windows To Go.
So my question is am I on the right track? Do I just need to examine each step in my task sequence and make sure that it will work properly with my Prestaged/Windows To Go stick? If so has anyone actually gotten this to work that could give me some advice?
Or is it asking too much to have a dynamic Windows To Go task sequence and I should just be building a thick image and using a second task sequence specifically for Windows to go?
are there any other resources for Windows To Go with SCCM that I'm missing?
Thanks,
Tony

First of all sorry I missed your last three posts I have to check my email notifications. I'll try to answer all of them even though I think the last part is the only one where you are still stuck.
When I created my prestaged media I didn't put anything into it except for the the OS image and my PE image. On the Select Application and Select Package screen in the prestaged media wizard remove any application or packages that are added automatically.
The task sequence is supposed to be smart enough to know if the version of the package that is on the prestaged media is out of date and go to a DP to get it but that didnt work for me. The only way I was able to get it to work was to remove all the packages
from the prestaged media even the Customsettings package, the MDT toolkit package, USMT, etc..
http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/d729d0ff-829f-4af8-91af-2131b3355fd0/
This thread which is about prestaged media in SCCM 2007 helped me to understand how prestaged media is supposed to work. Basically what I learned is that once the computer is rebooted from the ToGo stick into PE the task sequence will run the same as any
other task sequence installing any applications and setting up your ToGo stick just like any other computer that runs the task sequence they dont need to be in your prestaged media for this to happen.
You shouldn't need to worry about partitioning WTGCreator.exe will partition the ToGo stick for you I'm just using the standard MDT Integrated partitioning in my task sequence. The one thing that I did was set the Windows To Go Creator package to "run from
distribution point" which speed things up because then it didnt download the prestaged wim then apply it to the USB drive.
Is it booting into PE then rebooting? Did you check the "Allow unattend operating system deployment" check box when you made your prestaged media? If so it wants you to have set the task sequence to run in a task sequence variable SMSTSPreferredAdvertID
to the task sequence ID you want to run. I'd just remake the media and leave that box unchecked.
Good luck and let me know how it works for you. I'll check back sooner this time I promise.

DP Job queue manager not working- SCCM 2012 SP1

I am getting below error when trying to open DP job queue manager in sccm 2012 SP1
Please find the details information
see the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException: The SMS Provider reported an error. ---> System.Management.ManagementException:
Invalid query
   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   --- End of inner exception stack trace ---
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
   at DPJobMgr.Form1.SummaryRefresh_Click_real(Object sender, EventArgs e)
   at DPJobMgr.Form1.SummaryRefresh_Click(Object sender, EventArgs e)
   at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.TabControl.WmSelChange()
   at System.Windows.Forms.TabControl.WndProc(Message&
m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd,
Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1008 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
DPJobMgr
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/DPJobMgr.exe
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1002 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1001 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
Microsoft.ConfigurationManagement.ManagementProvider
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/Microsoft.ConfigurationManagement.ManagementProvider.DLL
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.233 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
System.Data.Linq
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Data.Linq.dll
System.Management
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
AdminUI.WqlQueryEngine
    Assembly Version: 5.0.0.0
    Win32 Version: 5.0.7958.1000
    CodeBase: file:///C:/Program%20Files%20(x86)/ConfigMgr%202012%20Toolkit%20R2/ServerTools/AdminUI.WqlQueryEngine.DLL
System.Configuration
    Assembly Version: 4.0.0.0
   Win32 Version: 4.0.30319.1015 (RTMGDR.030319-1000)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1015 built by: RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.237 (RTMGDR.030319-2300)
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true"
/>
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hi,
That is as expected, the new tools require Configuration Manager 2012 R2 to work. From the download page of Configuration Manager 2012 R2 toolkit.
"Note: Items with an * are new in the R2 Toolkit and require Microsoft System Center 2012 R2 Configuration Manager for full functionality.
Server Based Tools
* DP Job Manager - A tool that helps troubleshoot and manage ongoing content distribution jobs to Configuration Manager distribution points.
* Collection Evaluation Viewer - A tool that assists in troubleshooting collection evaluation related issues by viewing collection evaluation details.
* Content Library Explorer - A tool that assists in troubleshooting issues with and viewing the contents of the content library"
So you need to upgrade to R2 before you can use the new tools.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Software Update error - SCCM 2012 SP1

HI,
I have SCCM 2012 SP1 installed on Windows server 2008 R2 server. I have configured SUP role and tried sync from sccm console. I get the below error.
LOg:
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:11:42.047+00><thread=3840 (0xF00)>
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:12:42.255+00><thread=3840 (0xF00)>
Microsoft.SystemsManagementServer.WSUS.WSUSMSPException: WSUS sync failed with UssCommunicationError: ~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.IsSyncRunning() $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.462+00><thread=3840
(0xF00)>
Done using DEVSWAD\SWDTR-SRV-CMPATCH credentials~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
Failed to set Subscriptions on the WSUS
. Error:(-2146233088)Unknown error 0x80131500~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=3840 GMTDATE=Thu Jan 30 14:13:12.479 2014
I have configured proper proxy account which can connect to microsoft website and the port i have configured in proxy to allow is
80 and 443. I feel the port i need to allow may be i am not sure 8530 and 8531. Or 80 and 443 is fine. Please help
Regards, Pratap

It says to check WCM.log which i posted above
wsync log:
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.118+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 14:02:14.119 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please
refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.123+00><thread=4388 (0x1124)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.132+00><thread=4388 (0x1124)>
Wakeup for a polling cycle $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:14.495+00><thread=4388 (0x1124)>
Starting Sync $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.157+00><thread=4388 (0x1124)>
Performing sync on retry schedule $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.163+00><thread=4388 (0x1124)>
Read SUPs from SCF for DCMPSTPV01.devswad.net $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.577+00><thread=4388 (0x1124)>
Found 1 SUPs $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.830+00><thread=4388 (0x1124)>
Found active SUP DCMPSTPV01.devswad.net from SCF File.~ $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.833+00><thread=4388 (0x1124)>
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.876+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 15:02:15.882 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please refer
to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.892+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.912+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.915+00><thread=4388 (0x1124)>
Sync time: 0d00h00m01s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.024+00><thread=4388 (0x1124)>
Next scheduled sync is a retry sync at 31/01/2014 16:02:15 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.151+00><thread=4388 (0x1124)>
Regards, Pratap

Linking InTune to SCCM 2012 SP1

Hi, I have a question around what is required to link InTune and to our local SCCM 2012 SP1 server.
Is it required to sync our Active Directory objects? What we are hoping to achieve is to simply install the InTune client on our Windows 7/Windows 8 laptops and tablets, then manage updates, antivirus, remote control and inventory data.
We don't need the ability to have users self enroll devices, we will be installing the client in the IT department. We also do not need to provide the ability to users to log in to install applications from a portal. We just want to manage the
devices.
We just want to be able to bring data from the InTune system into our local SCCM database if possible as it ties into our inventory system.
That being said, I've verified our domain in InTune. Do I need to sync Active Directory or can I omit this and set up the InTune subscription in SCCM?
Thanks,
Travis

The official answer is
YES.
http://technet.microsoft.com/en-us/library/jj884158.aspx#bkmk_preq
The device apps prompt the user to log in. If their account isn't present within Azure AD (and therefore InTune), users will not be able to log in. In reality, i suspect some stuff would work, but with cloud services especially, i'd stick to
the official support guidance.
Mike Crowley | MVP
My Blog --
Planet Technologies

SCCM 2012 Sp1 CU3 support Windows 2012 R2 deployment?

Hi,
Sorry for so basic question, but I have read few docuemnts, blogs and official materials and I'm a bit confused.
In our organization we have SCCM Sp1 CU3. We are planning create and next deploy Windows 2012R2 Server images. On some documentations there is CU3 supports only application managment, inventory and so on. but there is nothing about image deployment.
So, my question is - I have to upgrade SCCM 2012 Sp1 CU3 to SCCM2012R2 to capture, build and deploy Windows 2012R2 system?
Thank you.

Yes, you do. See what's new with ConfigMgr 2012 R2
http://technet.microsoft.com/en-us/library/dn236351.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Deploying Office 2013 through SCCM 2012 SP1 leaves Office 2010 Tools and Sharepoint behind

I apologize in advance, but I have searched similar topics to this, but I haven't seen an answer yet that describes where and how to accomplish this. I'm also a bit new to SCCM and I'm still finding the nuances.
Scenario: Running SCCM 2012 SP1. Office 2013 32bit is added as an application and deployed properly with an accompanied .msp file stored in the source folder. The configuration is to have Office
2010 uninstalled silently. The deployment runs flawless and the user doesn't know otherwise. Success in anyone's book, right?
Except... Office 2010 Tools and SharePoint Workspace 2010 are left over. Manual uninstallation is not an option. This is for hundreds of PC's in several global locations.
I've seen it hinted to write a script. That's fine I suppose, but what do I write, where do I store the script, and can I have SCCM2012 automatically run it before the installation of 2013?
Our favorite IT tool Google hasn't quite returned what I'm looking for. Does anyone here have ideas or perhaps have experienced a similar issue?
Thanks,

1st, save the following content as a XML file on a server share, named as "config.xml".
<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
Run the following script during or before the installation of Office 2013:
"C:\Program Files\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe" /uninstall ProPlus /config \\servershare\Config.xml
For more SCCM specific topics, we'd recommend you to visit the SCCM forums at:
http://technet.microsoft.com/en-us/systemcenter/gg191847
Max Meng
TechNet Community Support

SCCM 2012 SP1 Maintenance -- Random Environments Rebooting Early

Background on my deployment process for SCCM 2012 SP1: I run a Powershell script that sends out a package and configures settings exactly the same for the particular environment set.
The deployment script will call one or several environments at a time, as applicable.
It will take each environment, affix the settings, push the package to be deployed (based on OS) during the specified maintenance window, and repeat. It is a very consistent process.
Last week, I deployed to A-CLOUD (name changed for simplicity purposes), among others.
A-CLOUD went through the same process as the others in the script (see end of paragraph), in which the appropriate settings were checked.
The environment was supposed to update and reboot on Saturday, July 12.
However, A-CLOUD (only) updated and bounced as soon as I sent out the package on Wednesday, July 9.
Also in the same deployment script was B-CLOUD, C-CLOUD, D-CLOUD, and E-CLOUD, which all updated and rebooted as planned on July 12.
I received an alert that A-CLOUD was rebooted by Configuration Manager. I checked the reboot logs in Task Scheduler to compare A-CLOUD with C-CLOUD days later to compare a faulty reboot with one that ran correctly
(both of these environments are on the same site). There was no difference in the log files.
This issue occurs at least one a month and I have only noticed ONE pattern, Server 2008R2 -- however, it is not always the same environment that will reboot early each month, same week, same day, etc. It seems to be
random.
Any ideas?

This is way too generic to be answered. What ConfigMgr object type are you deploying (package? application?)? How is the reboot initiated? How are the deployment settings etc.?
Torsten Meringer | http://www.mssccmfaq.de

Application Catalog website only accessible from server - clients give 401

Hi,
I have a weird problem, something has gone screwy in the IIS config I think.
I've had the SCCM 2010 R2 application catalog set up and running fine for some time. Recently I installed MBAM (Bitlocker Management) on the SCCM server. MBAM creates it's own website in IIS.
Following installation of MBAM the application catalog isn't fully working.
Clients trying to access http://servername/CMApplicationCatalog get asked repeatedly for credentials before getting a 401 error.
Clients accessing http://SERVER.IP4.ADDRESS/CMApplicationCatalog or http://servername/CMApplicationCatalog from the server see the application catalog without an authentication prompt (although they get an error if they try to install anything)
Browsing to http://localhost/CMApplicationCatalog from the server works properly - no authentication prompt and can install software.
The server is in the list of IE trusted sites. I've tried removing and reinstalling the Application Catalog roles.
Any idea what the problem is here?
Thanks,
Tim

Hi,
Thanks both - I don't see anyhthing strange in the IIS logs.
This is an example of it failing trying to access it by name manually entering details in the authentication box.
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 401 2 5 1542 1268
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 401 2 5 1542 3
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 401 2 5 1542 2
10.0.0.100 CCM_POST /bgb/handler.ashx RequestType=LogIn 80 - 10.0.0.163 ccmhttp - 200 0 0 304 0
10.0.0.100 GET /browserconfig.xml - 80 - 10.0.0.163 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+Win64;+x64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+InfoPath.3;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729)
- 404 0 2 1405 2
10.0.0.100 CCM_POST /bgb/handler.ashx RequestType=Continue 80 - 10.0.0.163 ccmhttp - 200 0 0 1258 4405
This is accessing it by IP, with the transparent authentication working.
10.0.0.100 GET /cMApplicationCatalog/ - 80 - 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 401 2 5 1542 1
10.0.0.100 GET /cMApplicationCatalog/ - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 1851 224
10.0.0.100 GET /cMApplicationCatalog/ClientBin/en-GB/en-GB.xap - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
404 0 2 1461 1
10.0.0.100 GET /cMApplicationCatalog/ClientBin/en/en.xap - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
404 0 2 1461 2
10.0.0.100 POST /cMApplicationCatalog/ApplicationViewService.asmx - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
200 0 0 772 429
10.0.0.100 POST /cMApplicationCatalog/ApplicationViewService.asmx - 80 DOMAIN-LOCAL\USER 10.0.0.163 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko http://10.0.0.100/cMApplicationCatalog/ClientBin/Microsoft.ConfigurationManager.SoftwareCatalog.Portal.xap?ver=5.0.7958.1000
200 0 0 2054 404
The difference I can see is that no credentials are showing in the logs in the top example.
I have checked IE settings which appear to be correct. Checking File -> Properties in IE shows the zone as Local intranet | Protected Mode: Off in both cases.
Tim

SCCM 2012 SP1 - Asset Intelligence

Hi All,
Need your advice on the below query please,
I have not enabled Asset intelligence synchronization point in SCCM 2012 SP1 but enabled Hardware Inventory, Sofware Inventory, SOftware Metering. Can i still able to pull reports related to hardware/software since i didnt enable Asset intelligence point.
Please advice
Regards, Pratap

From
https://technet.microsoft.com/en-us/library/gg681998.aspx#AssetIntelligenceSycnronizationPoint:
"The Asset Intelligence synchronization point is a Configuration Manager site system role used to connect to System Center Online (by using TCP port 443) to manage dynamic Asset Intelligence catalog information updates."
and
"In addition to downloading new Asset Intelligence catalog information, the Asset Intelligence synchronization point can upload custom software title information to System Center Online for categorization."
Thus, as Torsten stated, the AI sync point has *nothing* to do with actually gathering or reporting on information in your site unless you actually want the supplemental software categories, labels, and families defined in the catalog. Note that to
use the AI reports though, you must enable the AI classes in hardware inventory:
https://technet.microsoft.com/en-us/library/gg712322.aspx#BKMK_EnableAssetIntelligence
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 SP1 Application catalog website

Similar Messages

Maybe you are looking for