SCCM 2012 SP1 client compatiblity with OS X

Hi,
Anyone knows if CM 2012 SP1 CU3 or older is compatible with OS X 10.9
Mavericks?
Thanks

http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigMacClientReq So the answer is yes.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

Error installing SCCM 2012 SP1 client

Hi All,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on a couple of windows 2008 R2 servers.
Error 1904. Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895
The ccmsetup.log details the same message without Error 1904 indicated.
I am installing the client using the SUP method, which has worked without any problems on all 180 other windows servers I have done. ccmsetup starts and downloads all pre reqs required for the client rollout, but it then hits this error and does not
finish the installation.
Any help would be much appreciated?
Regards PowerShell90

Hi,
I've seen this issue a couple of times and usually it's related to incorrect Versions of C++ Library installed on the system you try to install the Client. Try and remove any existing installations, reboot and install this version;
http://www.microsoft.com/en-us/download/details.aspx?id=26368
Let me know how it goes.

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

Novell GINA removed after R2 upgrade to ConfigMgr 2012 SP1 client

I am working with a customer and we just noticed an issue when upgrading some of their SCCM 2012 SP1 clients to R2. After the upgrade, everything appears to work fine, but as soon as a restart happens, the Novell GINA is replaced by the Windows GINA.
These machines were running Windows XP SP3 with Novell Client 4.91 SP5. This did not occur when installing the ConfigMgr 2012 SP1 client originally, but appears to happen every time when the ConfigMgr client is upgraded to R2. I wouldn't have
thought the ConfigMgr 2012 R2 client upgrade would have anything to do with the GINA, but we can replicate the issue.
It's not due to Windows Updates getting installed in the background while the client is temporarily unmanaged, which was my initial thought. We ensured the policy to disable Windows Updates was correctly in place and that no updates were installed.
The only fix so far is to completely remove the Novell client and reinstall it.
Has anyone else run in to this?
Thanks!

Yes, I have seen this when we took over a group that had Novell. It was ConfigMgr 2007 at the time. We only had to keep Novell long enough to completely remove it later. So your process is correct.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

SCCM 2012 R2 Client only showing 2 items under Actions

I've enable AD Forest Discovery on Primary Site also checked Automatically create AD site boundaries when they are discovered and Automatically create IP address range boundaries for IP subnets when they are discovered.
I didn't change this (default) Disable AD Forest Discovery on CAS.
I am still running SCCM 2007 R3 SP2 in Production environment. Do I need to remove all the boundaries first on SCCM 2007? Before I could install SCCM 2012 R2 client?
The reason that I manually install SCCM 2012 R2 client to my test computers just want to see if the SCCM 2012 R2 client will install without any issues. Right now, there's :(
On my Client Push Installation Properties, I haven't Enable automatic site-wide push installation. I just don't want SCCM 2012 R2 client is automatically pushing it out. Should I enable this? Is there any effect?
Two nights ago, I manually deploy SCCM 2012 R2 client (right click to deploy SCCM Client) to my test Win7x64 Enterprise and Win8.1x64 Enterprise. Until this morning Actions are not fully there (it should be total 11)
SCCM 2012 R2 client (version 5.00.7958.1000) installed but SCEP 2012 is not install (I think there's a problem here) since I checked the Actions button on both of Win7x64 Enterprise and Win8.1x64 Enterprise are only showing 2 Actions:
1. Machine Policy Retrieval & Evaluation Cycle
2. User Policy Retrieval & Evaluation Cycle
I've checked on both of Win7x64 Enterprise and Win8.1x64 Enterprise logs (using CMTrace):
1. CcmExec.log -> no errors
2. LocationServices.log -> Current AD site of machine is Default-First-Site-Name
3. ClientLocation.log -> It knows my new MP (correct one)
4. ClientIDManagerStartup.log -> with errors below
ClientIDManagerStartup.log has lots of RED errors (same one):
<![LOG[RegTask: Failed to send registration request message. Error: 0x8000000a]LOG]!><time="11:26:13.695+420" date="07-03-2014" component="ClientIDManagerStartup" context="" type="3" thread="1716"
file="regtask.cpp:1297">
I am hoping someone will be able to point me to the right direcly, please. Thanks, Reza
Reza Prawirasatya

Idan,
Thanks for the info.
I have check this registry below:
Check in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Mobile Client
It's pointing to my new site code of SCCM 2012 R2 (it's not SCCM 2007 site code).
What I did wrong I deploy SCCM 2012 Client Custom Settings to a collection that I created and also Antimalware Policies to that collection as well where that collection has 0 (none members).
So I deleted and just simply pointed both SCCM 2012 Client Custom Settings and Antimalware Policies to All Systems and all my test computers (workstations & servers) have SCCM 2012 R2 client along with SCEP 2012.
I have more questions below:
What's the best way for me to approach this SCCM 2012 R2 Client push to a test computers (workstations and servers).
I have SCCM 2007 R3 SP2 is still running in Production, currently Boundaries set as IP subnet (not using AD Site, it used but I changed it 2 years ago).
Now, SCCM 2012 R2 Primary Site set Enable AD Forest Discovery with Automatically create AD & Automatically create IP address range boundaries for IP subnets.
Of course, by turning this option above, it will pick up lots of different IP subnets. Even the one our sister company (lots of different domain).
1. In SCCM 2012 R2 Boundary Groups, I set Default-First-Site-Name (AD Site), under Site Systems tab, I have also my Primary Site SCCM 2012 R2 here.
Here's the questions:
1. Do I need to add IP subnet in SCCM 2012 R2 Boundary Groups? Do I need to add let's say 10.xxx.20.xxx (IP subnet here).
2. Also, do I need to delete IP subnet in SCCM 2007 Boundaries that correspond to that IP subnet? Let's say I have 10.xxx.20.xxx (IP subnet here) and remove this one since I have added on number 1?
Reza Prawirasatya

Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

Hi,
I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily.
I just installed Office 2013 on this system and have activated it as necessary. The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM. I have other systems with
Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
What can I check to try and determine what the problem is?
Thanks in advance,
Nick

Yes, the 8.1 system is a member of collection where the update deployment is targeted.
Are there any specific logs I should check in the client? If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

Lync 2013 x64 silent client deployment via SCCM 2012 SP1

Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.

Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to convert Unmanaged SCEP clients to Managed in SCCM 2012 SP1

We recently started installing SCEP clients from the .exe and a preconfigured .xml file to client machines in a domain setting. This was done from a USB drive, going from machine to machine, with a .bat file.
This was a stop-gap until we were able to install and configure SCCM 2012 SP1.
PCs that already had the SCEP client (prior to SCCM coming into production) are showing up as unmanaged. PCs that have had SCCM install SCEP all are listed as managed.
I've searched, but have yet to find a definitive answer as to how get the manually installed SCEP clients to register as managed in SCCM.
AD Domain with WIN 2008 R2 DC, SQL 2012 Standard, SCCM 2012 SP1

Also, make sure the Endpoint Protection Point is installed properly on SCCM and the Client Setting for SCEP is enabled.
Juke Chou
TechNet Community Support

SCCM 2012 SP1 Update to CU5 not showing version 1600 for clients updated !

Recently upgraded SCCM 2012 SP1 and its showing a version of 5.0.7804.1600 as it should be. Pushed out the CU 5 client manager update to few machines and they are also showing .1600 as the version, however in SCCM 2012 manager itself it is not updating the
status of those machines from say .1000 or .1400 to .1600. Why is this happening and any solution for it ? I have also updated the CM on the server hosting the SCCM and is current to .1600 version.

Because the client agent version is returned from clients via heartbeat discovery which only occurs by default every 7 days. Thus, you need to be patient. Note that I generally recommend reducing the heartbeat cycle to at least once a day partly for
this reason.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 SP1 is Running on SQL Server 2012 with NO CU

I am working in an org that has SCCM 2012 SP1, it is and always has been running on SQL Server 2012 RTM, with NO CU installed it seems (judging by the file versions 11.0.2100.60, which are not the same as as documented here http://support.microsoft.com/kb/2703275).
sigh..........
So before I upgrade to R2 I will ensure I installed SP2 and CU3 onto SQL Server.
However, I am concerned about WHY SCCM 2012 SP1 requires SQL Server 2012 CU2 as a minimum and what damage may have been done as a result of this configuration?
Are there any actions that can be performed as remediation or health check?
Can anyone speculate?

However, I am concerned about WHY SCCM 2012 SP1 requires SQL Server 2012 CU2 as a minimum
Because the Microsoft product group decided it that way. All supported SQL versions are listed here:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
Damage? Hard (impossible) to tell. You would have seen errors in various components if there were problems.
Torsten Meringer | http://www.mssccmfaq.de

How to exclude music and pictures from backing with USMT in SCCM 2012 SP1?

How to exclude music and pictures from backing with USMT in SCCM 2012 SP1?
I know we can use config.xml but I m not sure what all steps to take.
Below is my understanding
1. Create Custom.xml file using below
<component context="System" type="Documents">
        <displayName>Test</displayName>
        <role role="Data">
            <rules>
             <unconditionalExclude>
                        <objectSet>
    <script>MigXmlHelper.GenerateDrivePatterns ("* [*.mp3]", "Fixed")</script>
                        </objectSet>
             </unconditionalExclude>
            </rules>
        </role>
    </component>
</migration>
2. Save as Custom.xml.
3. Copy it to USMT source files package in both the x86 and x64 subfolders and update the relevant USMT package distribution points.
I am confused as where in task sequence will we specify the custom.config file.

Edit the miguser.xml file. The default list is as follows:
-<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qdf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qsd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qel]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qph]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.doc*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dot*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rtf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mcw]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wps]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.scd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wri]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wpd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.xl*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.csv]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.iqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.oqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rqy]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wk*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wq1]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.slk]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dif]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ppt*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pps*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pot*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.sh3]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ch3]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pre]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ppa]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.txt]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pst]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.one*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vl*]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vsd]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mpp]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.or6]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.accdb]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mdb]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pub]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.xml]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ini]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dgn]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dic]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.dsk]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.gqa]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.gqu]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.id]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mpp]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.ora]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pab]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pdf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.pps]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.qry]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.r2w]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rdl]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rsf]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.url]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vdx]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vss]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vst]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vsx]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vtx]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.zip]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.rar]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.7z]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.iso]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.gif]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.jpg]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.bmp]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mp3]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.avi]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.mp4]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.wmv]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.bat]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.vbs]", "Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("* [*.lnk]", "Fixed")</script>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Will SCOM 2012 R2 co-exist with SCCM 2012 SP1

Hi. Sorry if the answer is obvious, but I need to ask...
Will SCOM 2012 R2 coexist with SCCM 2012 SP1?
We currently have SCOM 2007 R2 installed and we'd like to upgrade.
We installed SCCM 2012 close to 2 years ago and upgraded to SP1 last summer.
We had SCOM 2007 R2 integrated with SCVMM 2008 R2, but have upgraded to SCVMM 2012 SP1 recently - so there is nothing setup between SCOM and SCVMM.
There is currently nothing setup between SCOM and SCCM.
We're a single forest, single domain shop. Ideally, we'd like or System Center products to "work together", thus the question about the 2012 SP1 and R2 mix.
Thanks for any input. I appreciate your time and expertize. Joe.

Hi,
I concur with Alexey, a side note SCCM and SCOM do not use the same SQL Server.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Does Powershell 3.0 / Wmf 3 runs flawlessly with SCCM 2012 SP1

Hi the title says it all:
Does Powershell 3.0 / Wmf 3 runs flawlessly with SCCM 2012
SP1?
Thanks, Rob

Hi Rob,
WMF3 is required for ConfigMgr 2012 SP1:
http://support.microsoft.com/kb/2801416
(I posted the same link in your thread in the PowerShell forum).
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

SCCM 2012 SP1 client compatiblity with OS X

Similar Messages

Maybe you are looking for