SCCM 2012 SP1 - Driver Issue

Hi,
I have weird issue while building a tough book machine (CF19 Mark 7)
When i import and deploy the drivers as part of task sequence, all the drivers are getting applied but the screen resolution is completely blurring but if i change the monitor to true colour it works fine.
I verified the display adaptor which has standard VGA adaptor. Is this driver causing the issue and i am not sure. Please advice
Regards, Pratap

Hi,
It sounds like either the Display adapter driver did not install or is not included in a correct format in the drivers you imported. If you update the driver on the installed compouter using device manager from the drivers you imported does it work then?
Regards;
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

  • MBAM 2.5 integrated with SCCM 2012 SP1 compliance issue

    Hi,
    I have installed MBAM 2.5 in a SCCM integrated topology. GPO for encryption on the OS drive only have been deployed and encryption completed using the MBAM client. When running the compliance report and evaluating using the SCCM client the compliance comes
    back as non-compliant. I have tried several tweaks to the GPO but had no luck getting it to report as compliant. Using the dashboard report to try and pin point why it is non-compliant shows as non-compliant but using the reasons in the top right corner all
    have 0 instances.
    Is there a log file on the local system that can tell me what aspect is causing the status?

    In the Event Viewer, there is MBAM node, you will find all MBAM client events there.
    Also, review your GPO and see what encryption types are allowed and which are required. Maybe one reason would be, that your GPO requires something, which your client hasn´t done yet, like PIN code.
    I´ve seen issues with not being compliant to policy before, and there was some explanations of this, if you google around. I´m also intrested to get knowing this, because I couldn´t solve this compliance issue.
    For customer reporting, I just did query in SCCM where I listed ecrypted status and drive letters, that was a "customized report method" to tell customer, are all their Computers encrypted or not.

  • SCCM 2012 SP1 - Driver problem

    Hi All,
    I am trying to build a esprimo fujitsu desktop in which I get the below error everytime
    File:ifm63x64.sys
    Status:0xc0000098
    Windows failed to load because a required file is missing or corrupt
    I tried
    1. Removing the LAN driver
    2. SCSI Adaptor drivers and Storage drivers. I get the same problem is there any workground please
    Regards, Pratap

    The link posted above hasn't anything to do with the problem you're facing... Your problem is described here instead:
    http://venusingireddy.blogspot.fi/2013/07/windows-failed-to-load-ifm63x64sys.html
    So remove the Intel Enternet FCoE driver from your driver package and from your drivers completely, update your driver package and try again.

  • SCCM 2012 SP1 Beta Site System Roles Installation issues

    My apologies if this isn't the correct place to post this, but I didn't see any SCCM 2012 forums to post this. If there is a better place for this post, please direct me to the proper location. In the meantime this is my scenario:
    I am currently evaluating SCCM 2012 for our company. I have installed SCCM 2012 SP1 Beta on a test server running Server 2012 and SQL 2012. I am testing its ability to manage Windows 8. The server is a member of our company domain. I have enabled Active
    Directory Forest Discovery and CM has detected our forest and domain and set up boundaries automatically.
    I am trying to add the Application Catalog Web Service and Website Roles. When I start the wizard I get exclamation marks next to Active Directory forest and domain fields in the wizard. It shows our proper forest and domain names but won't proceed
    because it insists that the FQDN for my forest/domain is invalid. If I enter any other forest/domain name (e.g. yahoo.com, google.com, help-me.com) the exclamation marks clear and the wizard will proceed. SC seems to recognize our forest/domain name and
    denies it. Adding different suffixes (e.g. .net, .org, .local) changes nothing. I've even flipped our forest-domain name (e.g. "a-b.com" to "b-a.com": we have a "-" in our name) and it STILL denies it. If I add a prefix to the forest/domain name, the
    wizard is happy and lets me proceed (e.g. "domain.a-b.com") Did I miss something in initial setup? If this is a bug in the SP1 beta, how do I let anyone know about this? Any help/suggestions would be appreciated. Thanks.

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip

    we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we  run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
    task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
    Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
    Find below the smsts.log file
    Main error in the log file is
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151.    TSMBootstrap    2/12/2014 1:05:41 PM    1984 (0x07C0)
    Xtract from LOG
    SMSTSRebootDelay=60    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue.    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootRequested=WinPE    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    Process completed with exit code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    !--------------------------------------------------------------------------------------------!    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Successfully completed the action (Restart to Windows PE) with the exit win32 code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionRetCode=0    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionSucceeded=true    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Clear local default environment    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Executing command line: "bcdedit.exe"    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    CreateProcess failed. Code(0x80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Command line execution failed (80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Staging boot image UNB0003A    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    ResolveSource flags: 0x00000000    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    SMSTSPersistContent: . The content for package UNB0003A will be persisted    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    WinHttp credentials set    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    List of files to be downloaded    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim     TSManager    2/12/2014 1:02:22 AM    1876
    (0x0754)
    VerifyContentHash: Hash algorithm is 32780    TSManager    2/12/2014 1:02:22 AM    1876 (0x0754)
    Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Copying boot image locally...    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Failed to find ADK installation root registry key    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Applying image 1 to volume E:\_SMSTaskSequence\WinPE    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Capturing WinPE bootstrap settings    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    ==============================[ OSDNetSettings.exe ]===========================    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    No adapters found with non-empty DNSDomainSuffixSearchOrder    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Adapter "ROOT\SYMC_TEEFER2MP\0000" not found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    OSDNetSettings finished: 0x00000000    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Installing boot image to hard drive    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Backing up existing boot system before trying to set up new boot system    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    BootLoader::backup: C:\, E:\_SMSTaskSequence\backup    TSManager    2/12/2014 1:02:39 AM    1876 (0x0754)
    BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR    TSManager    2/12/2014 1:02:45 AM    1876 (0x0754)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:46 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Expand a string: %_SMSTSMDataPath%\Logs    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    <![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">  
          1/1/1601 12:00:00 AM    1995266923 (0x76ED5B6B)
    ==============================[ TSBootShell.exe ]==============================    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Debug shell is enabled    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Waiting for PNP initialization...    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Booted from fixed disk    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Found config path E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Restoring boot system from E:\_SMSTaskSequence\backup    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Successfully loaded the BCD boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully loaded an exported NTLDR boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    BootLoader::restore: E:\_SMSTaskSequence\backup, C:\    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully merged logs from cache.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading bootstrap settings from E:\_SMSTaskSequence\WinPE    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading saved WinPE settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00'    TSBootShell  
     2/12/2014 1:04:06 AM    796 (0x031C)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring WinPE bootstrap settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating WinPE answer file    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Setting hive location to "X:\windows\system32"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Getting namespace "Microsoft-Windows-Setup" for architecture "x86"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring global network settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Join type:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    IP filter sec enabled: false    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    No adapters found in environment.  Performing global configuration only.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Executing command line: wpeinit.exe -winpe    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Starting DNS client service.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    No adapters found in environment.  Performing global finalization only.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing global network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS for WINS enabled: false    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    LMHosts file enabled: true    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Host lookup file:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    WINS scope ID:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    ==============================[ TSMBootStrap.exe ]==============================    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Failed to open PXE registry key. Not a PXE boot.    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Resuming Task Sequence in WinPE    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat".    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Updating the local data path in the Task Sequencing Environment.    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxSize to 1000000    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxHistory to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogLevel to 0    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogEnabled to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogDebug to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Command line for extension .exe is "%1" %*    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    ==========[ TsProgressUI started in process 2004 ]==========    TsProgressUI    2/12/2014 1:05:41 AM    2008 (0x07D8)
    Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
    In dire need of help,
    I have already gone through the below articles on the NET
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
    Awating response,
    Hasan Reza

    Well Finally I sorted my issue ,
    Just want to share the solution, may be it would be helpful to some one else and save some times
    The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
    1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
    due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
    2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
    Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
    As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
    All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
    Thanks,
    Hasan Reza.
    http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen

  • SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

    Hi there
    Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
    I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
    I've tried injecting a single update, five updates and ten updates, no difference, same messages.
    We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
    In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
    "Failed to find or access the update binaries to be applied on the image."
    That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
    When I looked at the OfflineServicingMgr.log file, I see the following entries:
    Processing image at index 1        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:52:49        8272 (0x2050)
    Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite'        SMS_OFFLINE_SERVICING_MANAGER       
    14/06/2014 14:52:49        8272 (0x2050)
    Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31       
    8272 (0x2050)
    Failed to find properties of file 4        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
    UnMounting Image (Commit Changes = 0) ...        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
    Completed processing image package PackageID. Status = Failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    Updated history for image package PackageID in the database        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    Schedule processing failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    Processing completed for Schedule with ID 16777237        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0        SMS_OFFLINE_SERVICING_MANAGER       
    14/06/2014 14:54:04        8272 (0x2050)
    Schedule processing thread stopped        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:05        8272 (0x2050)
    I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
    "Completed processing image package PackageID. Status = Failed"
    As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
    If anyone has encountered this before, I'd appreciate any information you have.
    Regards,
    John.

    Hi,
    I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
    Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
    After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
    over there 
    'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
    Hope this will help!
    Cheers | Navdeep Sidhu

  • Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

    We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2.  We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012.  The deployment went as
    expected.  Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP.  I am afraid to find out what time we are looking at for remote DP's. 
    The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3.   We are using the same package source files.   Previous to a successful deployment we were
    seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
    So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment?  Our previous deployment time for office was a little over an hour (not five hours).  Any suggestions where to look to improve
    the deployment time? 
    I am expected to deploy this in one week and have been working on these issues for weeks.

    I see now that you are using a combination of scripts and ConfigMgr package/program.
    The AppEnforce.log file is for use with the new ConfigMgr Application model.
    Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
    Office 2013.
    This is how you do it
    http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • SCCM 2012 SP1 - OS Deployment - hash could not be matched for the downloded content

    I've got a newly deployed SCCM 2012 SP1 running on Windows Server 2012. The W2K12 runs as vm on ESX 5.1. I'm having very odd issues with OS deployment. The TS keeps failing when processing SCCM client installation - it downloads the package but then it fails
    straight away with the 80091007 - hash values couldn't be matched error - some extract from smsts.log attached below. It's very consistent, it happens every time - it downloads and applies the image fine straight after that it bombs out.
    What is very interesting is that it works perfectly fine when I deploy vms (on the same or different host) - the issue seems to be be only affecting physical machines (laptops desktops). This might suggest some network issues (vSwitch with Cisco switches) but
    the config on the switch is very simple and this shouldn't be the case.
    I had a few virtualised SCCM 2007 installations (ESX 5 and 4) and it always worked with no problems.
    I tried to recreate the package (changing source directory), turn binary differential replication on and off, copy the content of the package to the dist point or not copy. Push client installation (or other package deployments) work fine
    When I tried to deploy with no download - sometimes it works but most of the time I'd get the files/folder corrupt error (can't remember the No)
    This is starting to drive me crazy - There are some significant changes in the way SCCM 2012 is validating package integrity (like Content Lib folder) but the consistency of this problem is just very odd.
    Anyone has any clues?
    thanks
     - Downloaded file from http://GTKVMGMT05.GTK.LOC...m?/x64/wic_x64_enu.exe to C:\_SMSTaskSequence\Packages\GTK0000C\x64/wic_x64_enu.exe 
     - Download done setting progress bar to 100
    VerifyContentHash: Hash algorithm is 32780
    c:\_smstasksequence\packages\GTK0000c\i386 is a directory. Setting directory security
    c:\_smstasksequence\packages\GTK0000c\x64 is a directory. Setting directory security
     - Hash could not be matched for the downloded content. Original ContentHash = 5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C, Downloaded ContentHash = FA4516EDD2D7907F8FA472A3E1B717DF2DD4A0976CD4CEAE11045EE62EC8C661
    0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2999)
     - DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
     - DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
    TS::Utility::ResolveSource(sClientPackageID, sClientPackagePath), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\basesetuphook.cpp,1655)
     - Failed to resolve package source "GTK0000C"
     - Exiting ConfigureEx: 0x80091007
     - BaseSetupHook::configure(sWindowsDir), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\osdsetuphook.cpp,292)
     - Failed to configure OSD setup hook (0x80091007)
     - Failed to configure OSD setup hook (0x80091007)

    is this the only indication of a problem in your smsts.log file ? did you apply the
    authenticode hotfix or have you
    downloaded the SP1 media after that hotfix was applied ?
    Step by Step Configuration Manager Guides >
    2012 Guides |
    2007 Guides | I'm on Twitter > ncbrady

  • Prestaged OSD using SCCM 2012 SP1 windows Partition variable is not being set

    Hello All  I need some assistance with a workaround.
    I am using a presaged task sequence created from a working network / PXE deployment TS for windows 7.
    This TS sets a variable for the OS partition called "Windows" and the value is set in the Partition Disk task.
    Problem is this value is not being read from a prestaged due to the OEMMedia condition skipping this partition and format task.
    Question is how do I get it to read and or set the value for that partition?
    From what I have found on Google this was an issue in beta of MDT but was fixed in RTM.  I am not using MDT TS but I do have it installed. Any idea if this is a known issue with SCCM 2012 sp1 TS? 
    Edit: also noticed that the variable's case is different and will not let me change it.
    Variable under format is "windows"  variable under Apply OS is "Windows"  when I change them to be the same then close and reopen they revert back to the above.  Are these variables case sensitive?
    Edit: for now I have changed it from variable to next available partition.  I tested it twice so far it seems to be using the correct partition and it remains to be called the C drive.  For now this will be my solution.

    When you say "presaged task sequence created from a working network / PXE deployment TS" are you saying this is still a network boot process? Or have you done "Create Task Sequence Media"?
    Dustin Estes - MCP
    yes when i say prestaged that is using the create task sequence media then selecting prestaged.

  • SCCM 2012 SP1 - Software Center appears twice in Start Menu

    Hi guys,
    i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
    the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
    are always in the same language.
    The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
    deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
    Has anyone ever seen this? See a screenshot below:
    Thank you.
    Cheers
    Stefan

    Thanks for your Response Thomas.
    I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
    was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

  • SCCM 2012 SP1 errors when downloading updates

    Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
    The Environment is:
      Server 2008 R2
      SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
    I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
    After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
    Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
    ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
    Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
    Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
    Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
    I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
    heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
    trying to get it from.  I then see the .1 removed from the directory name and there are updates within them.
    Just for clarity here are the steps I go through from SCUP to Syncing...
    Log in to WSUS server
    Run SCUP as administrator
    Get notified there are updates from Adobe and let SCUP download updates
    Find the updates the specify the following publishing options
    Full Content
    Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
    Then click Next
    After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
    After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
    What am I missing?
    Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
    One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
    then I waited, maybe 30 days or so before I could add the updates back in.
    Thanks for the help!

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    Have you seen the note at the bottom of this page about this error?
    http://technet.microsoft.com/en-us/library/bb932193.aspx
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Management Point fails after installing SCCM 2012 SP1

    I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
    1. Newly built Windows Server 2012 box
    2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
    The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
    SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
    [19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
    MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
    The error code is 80041002
    Error 25140. Setup was unable to compile the file CcmExec_Global.mof
    The error code is 80041002
    CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
    [19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
    [19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
    [19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
    MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
    Internal Error 25001. 80070057
    CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result. 
    Would really appreciate some help if anyone's fixed this issue

    I'm still struggling, I've uninstalled MP
    <04/16/14 08:06:59> SMSMP Setup Started....
    <04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
    <04/16/14 08:06:59> Deinstalling the SMSMP
    <04/16/14 08:06:59> No versions of SMSMP are installed.  Returning Success.
    <04/16/14 08:06:59> ~RoleSetup().
    Ran the command, Invoke-Command  {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
    Checked Namespace Instances to ensure '= ccm' is not longer there. 
    Rebooted Server and re-installed MP but it still fails
    <04/16/14 08:37:26> ====================================================================
    <04/16/14 08:37:26> SMSMP Setup Started....
    <04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
    <04/16/14 08:37:26> Installing Pre Reqs for SMSMP
    <04/16/14 08:37:26>         ======== Installing Pre Reqs for Role SMSMP ========
    <04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP 
    <04/16/14 08:37:26> Pre Req MSXML60 found.
    <04/16/14 08:37:26> No versions of MSXML60 are installed.  Would install new MSXML60.
    <04/16/14 08:37:26> Enabling MSI logging.  msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
    <04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi 
    <04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
    <04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
    <04/16/14 08:37:26> Pre Req SqlNativeClient found.
    <04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
    <04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
    <04/16/14 08:37:26>         ======== Completed Installation of Pre Reqs for Role SMSMP ========
    <04/16/14 08:37:26> Installing the SMSMP
    <04/16/14 08:37:26> Passed OS version check.
    <04/16/14 08:37:26> IIS Service is installed.
    <04/16/14 08:37:26> No versions of SMSMP are installed.  Installing new SMSMP.
    <04/16/14 08:37:26> Enabling MSI logging.  mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
    <04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
    SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
    <04/16/14 08:37:26> mp.msi exited with return code: 1603
    <04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
    <04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
    <04/16/14 08:37:26> ~RoleSetup().
    On checking I don't seem to have anything in IIS, no default web site.
    I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
    Any assistance would be greatly appreciated.
    Thanks

  • SCCM 2012 SP1 - Evil Folders in Reporting Services - What Are They and How to Remove Them

    Hello All,
    There are a lot of sub-folders in the http://CentralSiteSCCM/ReportServer. They are like:
    <dir> Config_Mgr_CEN
    <dir> Config_Mgr_CEN.OLD.0
    <dir> Config_Mgr_CEN.OLD.1
    <dir> Config_Mgr_CEN.OLD.10
    <dir> Config_Mgr_CEN.OLD.100
    <dir> Config_Mgr_CEN.OLD.1000
    Only <dir> Config_Mgr_CEN is properly populated with the correct set of the default folders.
    Would you be so kind to advise on:
    What are they?
    How to remove them?
    What to do in order for them not to appear any more?
    Thank you very much in advance!

    Hi Mike,
    I ran into an issue when I did the SP1 upgrade where a majority of our reports were duplicated. I created a script to delete these duplicate reports and I've adjusted it to work for your situation. You can find the original thread here, if you're interested:
    http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
    You'll need to know your SCCM site code and the server name to run this script.
    # SCCM2012SP1-RemoveDuplicateSSRSFolders.ps1
    # This script will connect to SSRS on a specified server and delete all folders that end with .OLD.*
    # Used for SSRS cleanup after SCCM 2012 SP1 installation
    # Script must be run from an account that has access to modify the SSRS instance
    # 3/22/2013 - Mike Laughlin
    # Resources used in writing this script:
    # Starting point: http://stackoverflow.com/questions/9178685/change-datasource-of-ssrs-report-with-powershell
    # API Documentation: http://msdn.microsoft.com/en-us/library/ms165967%28v=sql.90%29.aspx
    # Previous script: http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
    # Define variables
    $SiteCode = ""
    $serverName = ""
    # Set the value of $noConfirm to $True only if you don't want to manually confirm folder deletion. Use with caution.
    $noConfirm = $False
    # Safeguard
    If ( $SiteCode -eq "" -or $serverName -eq "" ) { Write-Host "Enter the required information for the SiteCode and serverName variables before running this script." -ForegroundColor Red -BackgroundColor Black ; Exit }
    # Connect to SSRS
    $ssrs = New-WebServiceProxy -uri http://$serverName/ReportServer/ReportService2005.asmx?WSDL -UseDefaultCredential
    # Get a listing of all folders in SSRS
    $reportFolders = $ssrs.ListChildren("/", $True)
    # Find all folders containing .OLD.*
    $foldersToDelete = $reportFolders | Where { $_.Name -like "ConfigMgr_" + $SiteCode + ".OLD.*"}
    # Quit if no folders are found
    If ( $foldersToDelete.Count -eq 0 ) { Write-Host "No folders with .OLD.* found. Quitting." ; Exit }
    # Show a listing of the folders that will be deleted
    Write-Host "The following folders will be deleted from SSRS on" $serverName":`n"
    $foldersToDelete.Name
    Write-Host "`nTotal number of folders to delete:" $foldersToDelete.Count "`n"
    # Get confirmation before deleting if $noConfirm has not been changed
    If ( $noConfirm -eq $False )
    $userConfirmation = Read-Host "Delete these folders from" $serverName"? Enter Y or N"
    If ( $userConfirmation.ToUpper() -ne "Y" ) { Write-Host "Quitting, folders have not been deleted." ; Exit }
    # Delete the folders
    $deletedFolderCount = 0
    Write-Host "Beginning to delete folders now. Please wait."
    ForEach ( $folder in $foldersToDelete ) { $ssrs.DeleteItem($folder.Path) ; $deletedFolderCount++ }
    Write-Host "Folders have been deleted. Total number of deleted folders:" $deletedFolderCount
    Standard disclaimer: While this script worked just fine for me in my environment, I make no guarantees that it will work anywhere else. I've attempted to make this script as user friendly and generic as possible, but it may require slight tweaking to work properly.

  • Reporting services keep failing on SCCM 2012 SP1

    I have SCCM 2012 SP1 install with SSRS 2012 install on same server 2008 R2 server.
    Reporting services keep failing with the following message when trying to START the service from the Reporting Services Configuration Manager Console
    System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
       at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
       at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
    Thx,
    Joe
    Thx, Joe

    Good advice Garth, but I have opened over 5 cases to try to resolve this and several other issues with my troublesome SCOM 2012 SP1 upgrade. That is why I am also sending it to the community in hope they can provide assistance.
    CSS will only work on one specific issue and in most cases these are targeted bandaid fixes that DO NOT address the underlying or related issues. I a left to opening many tickets and still floundering with a unreliable product.
    It seems to only be with System Center. All other products by Microsoft seem to be reliable and predicable and are easily supported using break fix support model of the current MS teams.
    It is SQL (SSRS) that controls subscriptions not CM12. CM12 only leverages the APIs provided by SQL (SSRS).
    I hate to say this but Why do you think this problem has anything to do with CM12?
    If CSS tell you to re-create the subscription and the problem re-occurs then I would re-open the ticket and tell them that the problem is NOT fixed and to continue working on it.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Can I have an SCCM 2012 R2 server and a SCCM 2012 SP1 server in the same site?

    We are currently using SCCM 2012 SP1/MDT 2012 Update 1 to deploy Windows 7, and to migrate existing XP installs to Windows 7 (using the offline USMT functionality in MDT).  We are moving forward with Windows 8.1, and understand that
    we need to upgrade our SCCM infrastructure to SCCM 2012 R2/MDT 2013.  We also understand that this will cause us to lose the ability to migrate XP machines, since MDT 2013 uses a newer version of USMT that doesn’t support XP.
    What do we need to do to continue to support our XP migrations, and enable deployments of Windows 8.1?
    Can we have two SCCM servers in the same Site running different versions of SCCM? Do we need a separate site? 

    You don't explicitly need ConfigMgr 2012 R2 to support Win 8.1. SP1 CU3 will suffice although managing a few things like boot images is a little more difficult: http://blogs.technet.com/b/configmgrteam/archive/2013/10/21/how-to-enable-windows-8.1-deployment-in-sc-2012-configmgr-sp1-cu3.aspx
    You could create two separate site hierarchies, but that would be painful and involve tons of duplication. There would be other issues also if the systems are located on the same subnets and in the same AD forest.
    The best option is to get rid of XP. EOL is in less than 30 days!
    Next best is to stay on SP1 CU3 until you get rid of XP. I know that sucks, but keeping XP around is the root cause of this and many other coming issues in any organization wanting to keep it around.
    Jason | http://blog.configmgrftw.com

Maybe you are looking for

  • Mapping: CR (\n) tag in XML node gives # sign in R/3

    Hi all, My flow is JDBC to R/3 via a BAPI call. I have a problem transporting carriage returns (hard enters) from my DB table to R/3. IN XI the CR comes in as '\n' sign, afterwards it's mapped to the BAPI but when the BAPI is executed in R/3 the CR b

  • Run As

    Hi, I am developing a tool in the Java language. Platform: Windows, Using the Novell client. The user running this tool does not have any access rights to a folder on the network. I would like to give the application tool the ability to "Run As" a us

  • Since I downloaded snow leopard I cannot view my movies in iphoto. Is anyone else having this problem?

    Since I downloaded snow leopard, I cant view my movies in Iphoto.There is absolutely no response. (it does not default to anything else). Is anyone else having this problem? Suggestions please. My Iphoto says 7.1.5

  • Apex ORA-07445 using db links

    Have installed apex OK and working well. When using forms based on source from database links regularly crashes with the above exception. Please see fragments of trace and alert_xe.log. Current SQL is always COMMIT Any suggestions would be great. Tha

  • Full time LabVIEW opening in Silicon Valley

    My name is Jon Christensen and I have been recruiting in Silicon Valley for 15 years. I have a firm called SearchTech Solutions and one of our clients is looking for a senior LabVIEW developer. The info about our client and the position are below. Pl