SCCM 2012 SP1 - Driver problem
Hi All,
I am trying to build a esprimo fujitsu desktop in which I get the below error everytime
File:ifm63x64.sys
Status:0xc0000098
Windows failed to load because a required file is missing or corrupt
I tried
1. Removing the LAN driver
2. SCSI Adaptor drivers and Storage drivers. I get the same problem is there any workground please
Regards, Pratap
The link posted above hasn't anything to do with the problem you're facing... Your problem is described here instead:
http://venusingireddy.blogspot.fi/2013/07/windows-failed-to-load-ifm63x64sys.html
So remove the Intel Enternet FCoE driver from your driver package and from your drivers completely, update your driver package and try again.
Similar Messages
-
Hi,
I have weird issue while building a tough book machine (CF19 Mark 7)
When i import and deploy the drivers as part of task sequence, all the drivers are getting applied but the screen resolution is completely blurring but if i change the monitor to true colour it works fine.
I verified the display adaptor which has standard VGA adaptor. Is this driver causing the issue and i am not sure. Please advice
Regards, PratapHi,
It sounds like either the Display adapter driver did not install or is not included in a correct format in the drivers you imported. If you update the driver on the installed compouter using device manager from the drivers you imported does it work then?
Regards;
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
SQL version problem during SCCM 2012 sp1 setup
Hi
I am trying to install SCCM 2012 sp1 with a remote sql 2012 server.
during setup when I enter the SQL name i hit next and then I get this error.
"Configuration Manager requires Microsoft SQL Server 2008 SP2 with Cumulative update 9 or higher, Microsoft SQL Server 2008 SP3 with Cumulative update
4 or higher, Microsoft SQL Server 2008 R2 SP1 with Cumulative update 6 or higher or Microsoft SQL Server 2012 with Cumulative update 2 or higher,"
I installed SQL sp1 and CU3 as well. but still the same error.
please assist
thanks
troyHi,
If you use default instance, please do not fill in the instance name.
You could use “telnet sqlserver 1433” to verify the connection and port.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip
we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
Find below the smsts.log file
Main error in the log file is
No physical network adapters found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151. TSMBootstrap 2/12/2014 1:05:41 PM 1984 (0x07C0)
Xtract from LOG
SMSTSRebootDelay=60 Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue. Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
SMSTSRebootRequested=WinPE Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
Process completed with exit code 0 TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
!--------------------------------------------------------------------------------------------! TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Successfully completed the action (Restart to Windows PE) with the exit win32 code 0 TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Set authenticator in transport TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Clear local default environment TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Executing command line: "bcdedit.exe" TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
CreateProcess failed. Code(0x80070002) TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Command line execution failed (80070002) TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Staging boot image UNB0003A TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
ResolveSource flags: 0x00000000 TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
SMSTSPersistContent: . The content for package UNB0003A will be persisted TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
Set authenticator in transport TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
WinHttp credentials set TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
List of files to be downloaded TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim TSManager 2/12/2014 1:02:22 AM 1876
(0x0754)
VerifyContentHash: Hash algorithm is 32780 TSManager 2/12/2014 1:02:22 AM 1876 (0x0754)
Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim TSManager 2/12/2014 1:02:25 AM 1876 (0x0754)
Copying boot image locally... TSManager 2/12/2014 1:02:25 AM 1876 (0x0754)
Failed to find ADK installation root registry key TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Applying image 1 to volume E:\_SMSTaskSequence\WinPE TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Capturing WinPE bootstrap settings TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
==============================[ OSDNetSettings.exe ]=========================== OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
No adapters found with non-empty DNSDomainSuffixSearchOrder OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
Adapter "ROOT\SYMC_TEEFER2MP\0000" not found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
No physical network adapters found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
OSDNetSettings finished: 0x00000000 OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
Process completed with exit code 0 TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
Installing boot image to hard drive TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
Backing up existing boot system before trying to set up new boot system TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
BootLoader::backup: C:\, E:\_SMSTaskSequence\backup TSManager 2/12/2014 1:02:39 AM 1876 (0x0754)
BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\ TSManager 2/12/2014 1:02:43 AM 1876 (0x0754)
Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD TSManager 2/12/2014 1:02:43 AM 1876 (0x0754)
Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR TSManager 2/12/2014 1:02:45 AM 1876 (0x0754)
Process completed with exit code 0 TSManager 2/12/2014 1:02:46 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Expand a string: %_SMSTSMDataPath%\Logs TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
<![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">
1/1/1601 12:00:00 AM 1995266923 (0x76ED5B6B)
==============================[ TSBootShell.exe ]============================== TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL' TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Debug shell is enabled TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Waiting for PNP initialization... TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Booted from fixed disk TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Found config path E:\_SMSTaskSequence TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go. TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Restoring boot system from E:\_SMSTaskSequence\backup TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Successfully loaded the BCD boot system TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
Successfully loaded an exported NTLDR boot system TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
BootLoader::restore: E:\_SMSTaskSequence\backup, C:\ TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
Successfully merged logs from cache. TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Loading bootstrap settings from E:\_SMSTaskSequence\WinPE TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Loading saved WinPE settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00' TSBootShell
2/12/2014 1:04:06 AM 796 (0x031C)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Configuring WinPE bootstrap settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Creating WinPE answer file TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Setting hive location to "X:\windows\system32" TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Getting namespace "Microsoft-Windows-Setup" for architecture "x86" TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Configuring global network settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Join type: TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
DNS domain: exch1.mas.unb.com TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
DNS domain search order: TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
IP filter sec enabled: false TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
No adapters found in environment. Performing global configuration only. TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Executing command line: wpeinit.exe -winpe TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
The command completed successfully. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Starting DNS client service. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Finalizing network settings TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
No adapters found in environment. Performing global finalization only. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Finalizing global network settings TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS domain: exch1.mas.unb.com TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS domain search order: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS for WINS enabled: false TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
LMHosts file enabled: true TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Host lookup file: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
WINS scope ID: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
The command completed successfully. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL' TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL' TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Failed to open PXE registry key. Not a PXE boot. TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Resuming Task Sequence in WinPE TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00' TSMBootstrap
2/12/2014 1:05:40 AM 1984 (0x07C0)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00' TSMBootstrap
2/12/2014 1:05:40 AM 1984 (0x07C0)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat". TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Updating the local data path in the Task Sequencing Environment. TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogMaxSize to 1000000 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogMaxHistory to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogLevel to 0 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogEnabled to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogDebug to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Command line for extension .exe is "%1" %* TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
==========[ TsProgressUI started in process 2004 ]========== TsProgressUI 2/12/2014 1:05:41 AM 2008 (0x07D8)
Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
In dire need of help,
I have already gone through the below articles on the NET
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
Awating response,
Hasan RezaWell Finally I sorted my issue ,
Just want to share the solution, may be it would be helpful to some one else and save some times
The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
Thanks,
Hasan Reza.
http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen -
SCCM 2012 SP1 - OS Deployment - hash could not be matched for the downloded content
I've got a newly deployed SCCM 2012 SP1 running on Windows Server 2012. The W2K12 runs as vm on ESX 5.1. I'm having very odd issues with OS deployment. The TS keeps failing when processing SCCM client installation - it downloads the package but then it fails
straight away with the 80091007 - hash values couldn't be matched error - some extract from smsts.log attached below. It's very consistent, it happens every time - it downloads and applies the image fine straight after that it bombs out.
What is very interesting is that it works perfectly fine when I deploy vms (on the same or different host) - the issue seems to be be only affecting physical machines (laptops desktops). This might suggest some network issues (vSwitch with Cisco switches) but
the config on the switch is very simple and this shouldn't be the case.
I had a few virtualised SCCM 2007 installations (ESX 5 and 4) and it always worked with no problems.
I tried to recreate the package (changing source directory), turn binary differential replication on and off, copy the content of the package to the dist point or not copy. Push client installation (or other package deployments) work fine
When I tried to deploy with no download - sometimes it works but most of the time I'd get the files/folder corrupt error (can't remember the No)
This is starting to drive me crazy - There are some significant changes in the way SCCM 2012 is validating package integrity (like Content Lib folder) but the consistency of this problem is just very odd.
Anyone has any clues?
thanks
- Downloaded file from http://GTKVMGMT05.GTK.LOC...m?/x64/wic_x64_enu.exe to C:\_SMSTaskSequence\Packages\GTK0000C\x64/wic_x64_enu.exe
- Download done setting progress bar to 100
VerifyContentHash: Hash algorithm is 32780
c:\_smstasksequence\packages\GTK0000c\i386 is a directory. Setting directory security
c:\_smstasksequence\packages\GTK0000c\x64 is a directory. Setting directory security
- Hash could not be matched for the downloded content. Original ContentHash = 5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C, Downloaded ContentHash = FA4516EDD2D7907F8FA472A3E1B717DF2DD4A0976CD4CEAE11045EE62EC8C661
0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2999)
- DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
- DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
TS::Utility::ResolveSource(sClientPackageID, sClientPackagePath), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\basesetuphook.cpp,1655)
- Failed to resolve package source "GTK0000C"
- Exiting ConfigureEx: 0x80091007
- BaseSetupHook::configure(sWindowsDir), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\osdsetuphook.cpp,292)
- Failed to configure OSD setup hook (0x80091007)
- Failed to configure OSD setup hook (0x80091007)is this the only indication of a problem in your smsts.log file ? did you apply the
authenticode hotfix or have you
downloaded the SP1 media after that hotfix was applied ?
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady -
Prestaged OSD using SCCM 2012 SP1 windows Partition variable is not being set
Hello All I need some assistance with a workaround.
I am using a presaged task sequence created from a working network / PXE deployment TS for windows 7.
This TS sets a variable for the OS partition called "Windows" and the value is set in the Partition Disk task.
Problem is this value is not being read from a prestaged due to the OEMMedia condition skipping this partition and format task.
Question is how do I get it to read and or set the value for that partition?
From what I have found on Google this was an issue in beta of MDT but was fixed in RTM. I am not using MDT TS but I do have it installed. Any idea if this is a known issue with SCCM 2012 sp1 TS?
Edit: also noticed that the variable's case is different and will not let me change it.
Variable under format is "windows" variable under Apply OS is "Windows" when I change them to be the same then close and reopen they revert back to the above. Are these variables case sensitive?
Edit: for now I have changed it from variable to next available partition. I tested it twice so far it seems to be using the correct partition and it remains to be called the C drive. For now this will be my solution.When you say "presaged task sequence created from a working network / PXE deployment TS" are you saying this is still a network boot process? Or have you done "Create Task Sequence Media"?
Dustin Estes - MCP
yes when i say prestaged that is using the create task sequence media then selecting prestaged. -
Deployed Windows 7 Image failing to start -SCCM 2012 SP1
Hello, I am deploying windows 7 image using SCCM 2012 SP1, the installation goes thru fine but when it is in the process of restart, a blue screen is displayed for a split second and then it tries to reboot again with same results. Are there any logs on
the SCCM server I can check to see where the problem may be?This generally means inaccessible boot device. How are you partitioning the drive and applying the image?
This is one way to do it
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part_18.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
SCCM 2012 SP1 - Software Center appears twice in Start Menu
Hi guys,
i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
are always in the same language.
The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
Has anyone ever seen this? See a screenshot below:
Thank you.
Cheers
StefanThanks for your Response Thomas.
I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
was created when i captured my base Image, the other one was created during the Install OS Task Sequence. -
SCCM 2012 SP1 errors when downloading updates
Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:52:49 8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite' SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49 8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
UnMounting Image (Commit Changes = 0) ... SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
Completed processing image package PackageID. Status = Failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Updated history for image package PackageID in the database SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Schedule processing failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Processing completed for Schedule with ID 16777237 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04 8272 (0x2050)
Schedule processing thread stopped SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:05 8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu -
We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2. We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012. The deployment went as
expected. Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP. I am afraid to find out what time we are looking at for remote DP's.
The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3. We are using the same package source files. Previous to a successful deployment we were
seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment? Our previous deployment time for office was a little over an hour (not five hours). Any suggestions where to look to improve
the deployment time?
I am expected to deploy this in one week and have been working on these issues for weeks.I see now that you are using a combination of scripts and ConfigMgr package/program.
The AppEnforce.log file is for use with the new ConfigMgr Application model.
Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
Office 2013.
This is how you do it
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Hi,
I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily.
I just installed Office 2013 on this system and have activated it as necessary. The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM. I have other systems with
Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
What can I check to try and determine what the problem is?
Thanks in advance,
NickYes, the 8.1 system is a member of collection where the update deployment is targeted.
Are there any specific logs I should check in the client? If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Reporting services keep failing on SCCM 2012 SP1
I have SCCM 2012 SP1 install with SSRS 2012 install on same server 2008 R2 server.
Reporting services keep failing with the following message when trying to START the service from the Reporting Services Configuration Manager Console
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
Thx,
Joe
Thx, JoeGood advice Garth, but I have opened over 5 cases to try to resolve this and several other issues with my troublesome SCOM 2012 SP1 upgrade. That is why I am also sending it to the community in hope they can provide assistance.
CSS will only work on one specific issue and in most cases these are targeted bandaid fixes that DO NOT address the underlying or related issues. I a left to opening many tickets and still floundering with a unreliable product.
It seems to only be with System Center. All other products by Microsoft seem to be reliable and predicable and are easily supported using break fix support model of the current MS teams.
It is SQL (SSRS) that controls subscriptions not CM12. CM12 only leverages the APIs provided by SQL (SSRS).
I hate to say this but Why do you think this problem has anything to do with CM12?
If CSS tell you to re-create the subscription and the problem re-occurs then I would re-open the ticket and tell them that the problem is NOT fixed and to continue working on it.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
NickHi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
Lync 2013 x64 silent client deployment via SCCM 2012 SP1
Greetings everyone!
I ran into a problem with Lync 2013 x64 silent deployment.
I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
Added them as applications to sccm software library.
Deployment of Lync 2013 x86 application was a success with over than 80% compliance.
But all Lync 2013 x64 automatic installations finish with different errors.
I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
My membership query-rules for this collection:
Office 2013 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
Office 2010 x64
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
= SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
The same configuration works with Lync 2013 x86 deployment, except other setup folders.
When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
sites with deployment point.
Thanks in advance.Hi,
Here are some tips and tricks for your reference.
Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Hi , I am trying some scenario using file adaptor but it is not working. I tried with Runtime Workbench but my adaptor entry is not there in Adaptor monitoring. Can anybody plz tell me how to check whether adaptor is working or not? I am
-
How to swap eth0 - eth1 with testingudev rules[SOLVED
Hi, I want to use the udev in testing because my ML-1710P works just out of the box. Of course there is one problem ... I have two network cards and they are recognized by kernel as eth0 the one that uses 8139too (a Realtek I belive) and as eth1 the
-
MULTIPLE PAGE OFFICE JET PRO X476DW
I want to scan a muliple page document to a single file. when I scan it seperated all the pages to single pages, and attaches it to the other pges. for instance if i have 2 pages to scan, it will scan 2 pages and be added to the others that I have sc
-
When I try to connect to my application icon it states "cannot connect to itunes store" why and how can I fix it
-
Why does Lightroom 5 install leave previous versions?
I just installed Lighteoom 5 on my system, and I had Lightroom 4. I expected it to just upgrade. Instead, I now have both? Why, I do not want both, I just want the most current one.Yes, I know I can uninstall the old one, and I did.. I just want to k