SCCM 2012 SP1 drivers are not installed

Hi
I've the problem that drivers are not installed by PXE staging. I'm 100% sure I've the correct drivers. I've installed them over a pendrive without any problem but, SCCM doesn't install any driver, also I receive no error message. I see that the drivers
are downloaded during the staging process but after the driver installation step nothing is installed. I have this problem on all hardware types and devices. It's ever the same. The task sequenze is also correct. We checked that again and again.
First I loaded the whole driver package (including all drivers for this hardware tag) => dosen't work.
Have deleted all drivers and assigend just the exact network driver to the categorie ==> dosen't work.
Had also an SCCM specialist in the house which analyzed this issue but, he also cannot explain what could be the reason. He has never seen such a problem and he has installed a lot of SCCM2012 environments.
Has anyone an idea or maybe similar problems?
Thank you!
Sacha

Hello Andre,
I got now an answer from Microsoft. It really seems like the setup installation is no longer supported for Windows 7 like Thomas said.
The better formulation in the WhatsNew in SP1 (http://technet.microsoft.com/en-us/library/jj591552.aspx#BKMK_WhatsNewSP1_Software) would be:
The build and capture task sequence was updated to apply an operating system image instead of running Setup.exe for installation. You can only
still run Setup.exe for Windows 8 deployments by editing the task sequence in the task sequence editor.
First I thought this would be a joke but seems so. I was able to very that it will work if you use an image. With the image all drivers were installed and the task sequence ended without any error.
I loaded the install.wim from the original CD as image install and used the OSDPreserveDriveLetter setting like Thomas said.
I asked Microsoft for an official statement if this install type would be supported by Microsoft or what the recommended way is to create the golden image by using SCCM. At the moment I’m waiting for the final answer. I don’t want to use
unsupported installation methods for my customers.
I will post the answer from Microsoft after I got it.
We all could be happy that we now have Windows 8 and all Company want to install Windows 8 at all systems otherwise we have to wait until we get a supported way. ;.)
regards
Christoph

Similar Messages

My Ipod touch Is stuck in restoe mode. I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

Hp web cam drivers are not installed

hey i got problem,in device manger my hp web cam drivers are not installed ...from where should i download the drivers of hp web cam..thank u

Hi
HP Universal Camera Driver

SCCM 2012 R2 Clients are not retrieving policy

Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???

Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)"

Hp probook 4520s model web cam drivers are not instaling

i am using windows 8.1 64bit os. i was download webcam drivers from hp support site, but that software are not instaling. please help me my email: [email protected]

Hi
HP Universal Camera Driver

Windows Deployment Services 2012 - Driver Group filter by Model value not working - Drivers are not installed!

Hi,
I'm using Windows Deployment Services 2012 to deploy Windows 7 Pro x64 driverless images to different hardware models (drivers are injected using WDS). I already have organized the drivers in driver groups per
hardware model. I'm experiencing driver conflicts so I decided to start using driver group filters to make sure that the driver groups are available only available for the corresponding hardware model.
To get the correct values for the filters i have used the following method: (as described in this article: http:// technet.microsoft.com/en-us/library/dd759191.aspx)
so I checked msinfo32.exe
(System Manufacturer: Dell Inc. System Model: OptiPlex 790)
and set these values in the driver group filter:
Then fired up WDS using PXE booting on my OptiPlex but when finished: No drivers are installed! I investigated further and found on forums to use the following commands (which return the same values btw):
wmic bios get manufacturer
(returns: Dell Inc.)
wmic computersystem get manufacturer
(returns: Dell Inc.)
wmic computersystem get model
(returns: OptiPlex 790)
Values are the same so no problem there.
Then I checked the output of the following commands:
wmic bios get model (returned: error, invalid query)
wmic bios get /all (returned: all kind of information but no model value)
When I remove the value "OptiPlex 790" from the filter list the drivers are installed correctly. So this has to be some problem with the Model value.
Could someone please help me?
As a workaround I now disable all the driver groups exept the one that I need for the hardware. But as more new hardware models are added this is a lot of work to do everytime.
Extra info:
I'm using a WINPE 4.0 image (windows 7 media boot.wim file). 6.1.7.601
Windows Server version: Windows Server 2012 - version 6.2 (Build 9200) - All Windows updates are installed
Windows Deployment Services version 6.2.9200.16384
Having this problem on multiple systems
Questions:
- Does WDS/WinPE uses only the Bios values for determining system info? (then this problem could be with Dell in this example, because no model value is available)
- Is this the correct way to set up driver group filters? (then this is a problem with MS. Does anyone have solution??)
Thank you for your answers & help!

Hi Microsoft,
I still have no answer to my Questions.
Thank you for your answers & help!

AMD Drivers are not installing

The install log from AMD-Catalyst-14.4-64Bit-Win8.1-Win8-Win7-WHQL-Aug shows a successful install of the packages for AMD Catalyst Install Manager, Microsoft Visual C++ 2012 Redistributable (x64), HydraVision, and AMD Catalyst Control Center.
It shows the following items detected, but no drivers were installed: ATI Radeon 2100 (RS740) video adapter, ATI Integrated SATA Support, ATI Integrated SMBus Support, and ATI Integrated Azalia Support.
Is this a Windows 10 TP issue or an AMD issue? Supposedly the AMD drivers are compatible with Windows 8.1. If this is a Windows 10 issue, will the installation of these drivers be resolved prior to the RTM release?

Is this a Windows 10 TP issue or an AMD issue? Supposedly the AMD drivers are compatible with Windows 8.1. If this is a Windows 10 issue, will the installation of these drivers be resolved prior to the RTM release?
It's both and is a situation experienced with each and every pre-production version of Windows published for more than 20 years. Microsoft makes changes to the kernel which causes a number of third party application, utilities, and drivers to not function
properly. It is then up to the publisher of the third party application, utility, or driver to incorporate the changes need into their own product to enable it to function with the changes made by Microsoft.
It is important to work with the publisher of the offending application, utility, or driver so they are aware of the problems and so they in turn can co-ordinate with Microsoft to accommodate the changes.
If you have a hard time dealing with these situations then you should not be "testing" pre-production products.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Some BootCamp drivers are not installing...!?

Hello everyone.
I've recently installed Bootcamp and WinXP Pro x32 on my new MacBook Unibody.
I got a very unpleaseant surprise...
The drivers for the wifi, ethernet, bluetooth, processor aid, chipset and isight are simply NOT installing. I'm getting the "new hardware found" notification every time I boot up, and when I try to upgrade the drivers of these "unknown devices" @ the Device Manager control panel, no adequate drivers are found. I've re-installed the bootcamp drivers that came with my MB like 10 times, with NO luck.
HELP!

I'm having a similar issue...
I don't have access to the Leopard CD, and I'm not paying Apple 12 bucks to ship me the CD I already own just because I left it in my dorm over interterm, but that's neither here nor there. The point is I installed XP, downloaded the drivers and installed them. The only appreciable difference after installing the drives from the installer I downloaded is that there is now the boot camp task bar icon. None of the other drivers got installed, though the installer listed them all and went smoothly.
If it helps any, this is a re-install. I wiped the windows partition clean in Disk Utility and re-installed from the same CD I used before. The only difference is this time I don't have the Leopard DVD to install the drivers from.
Any help?

[SCCM 2012 SP1 W2K8R2] SUP not in Sync with WSUS settings (Language)

Hi All,
I have almost identical production and test SCCM environment.
After I setup SUP on both production and test environment SUP Language settings are not replicated to WSUS and cause WSUS/SCCM to Sync all languages.
SCCM 2012:
WSUS:
Any idea how to fix this?
Thank you in advance.
Regards,

Hi,
There is nothing to fix, it looks exactly the same in my environment. The updates are not downloaded using WSUS it is downloaded using either the SCCM console or the SCCM Primary Site server if you use and ADR and when you download the updates the settings
are beeing honoured.
So this is expected behaviour.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Sccm 2012 sp1 upgrade, new client install hangs

I just upgraded from 2012 to 2012 sp1. When i try the "Install Client" ccmsetup.exe appears to hang on the remote machine. Thoughts?

Thanks for helping me track down the issue. Now for the actual problem.
<![LOG[Checking compatibility of site version '5.00.7711.0000', expect newer than '5.00.7783.1000']LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="1" thread="1208" file="siteinfo.cpp:703">
<![LOG[Client version '5.00.7804.1000' is not compatible with the site 'LNK' version '5.00.7711.0000'.]LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="2" thread="1208" file="siteinfo.cpp:721">
<![LOG[Client version '5.00.7804.1000' is not compatible with the site 'LNK' version '5.00.7711.0000'. Fail the installation.]LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="3" thread="1208" file="ccmsetup.cpp:1439">
<![LOG[CcmSetup failed with error code 0x87d0029d]LOG]!><time="20:10:02.519+300" date="05-20-2013" component="ccmsetup" context="" type="1" thread="1044" file="ccmsetup.cpp:10544">
So after the upgrade process i "accidently" ran a reset this site from the install. Not sure if thats what is cuasing my issues but i wanted that to be known. Other then that i am not sure why my site is show as pre sp1 still.
My setup is just 1 primary box nothing complicated all self contained.
*EDIT*
If i go to Administration->Site COnfiguration->Sites->Properties on LNK
It shows Build number 7804
*EDIT*
After reading through this post
http://social.technet.microsoft.com/Forums/en-US/configmanagerdeployment/thread/77abdd5a-fdb8-4202-b092-ddce0dc05b7b/
I get a new error
<![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="httphelper.cpp:1972">
<![LOG[Received header '<Msg SchemaVersion="1.1">
<ID>{0568D04C-8345-4CD0-A502-76391B624A0A}</ID>
<SourceID>GUID:86F07109-3652-438D-811D-8C96A1EA8FBF</SourceID>
<SourceHost>SYSCEN0</SourceHost>
<TargetAddress>direct:COD-VMSCCMT:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<ReplyCapabilities><AllowRegistrationReset>direct:SYSCEN0:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>COD-VMSCCMT</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2013-05-21T12:57:17Z</SentTime><Body Type="ByteRange" Offset="0" Length="1252"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">SYSCEN0;SYSCEN0.abc.medforest.org;</Property><Property Name="MPSiteCode">LNK</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="httphelper.cpp:1724">
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="LNK" MasterSiteCode="LNK" SiteLocality="LOCAL" IISPreferedPort="" IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="LNK00002" FullPackageVersion="2" FullPackageHash="5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C" MinimumClientVersion="5.00.7804.1000" RandomizeMaxDays="1" ProgramEnabled="false" LastModifiedTime="30298897;380127488" SiteVersionMatch="true" SiteVersion="5.00.7804.1000" EnablePeerCache="true"/></ContentLocationReply>']LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="siteinfo.cpp:221">
<![LOG[Failed to get DP locations as the expected version from MP 'SYSCEN0.abc.medforest.org'. Error 0x87d00215]LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="2" thread="1312" file="ccmsetup.cpp:10926">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='101' will not be sent.]LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="1" thread="1312" file="ccmsetup.cpp:9428">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="07:57:17.773+300" date="05-21-2013" component="ccmsetup" context="" type="0" thread="1312" file="ccmsetup.cpp:8498">

I have a presario v2000 and the wifi nic and the hardwired nic drivers are not installing...

My networking cards will not take any drivers for them that I try to install the wireless is a Broadcom 54G Max Performance 802.11a/b/g and I am not sure what kind the hardwired nic is this is windows xp home 1 gig of ram 60 gig hardrive trying to figure out what to do all help is greatly appreciated thank you.....

Hi,
For wireless, this series has few flavors: could be Intel card or Broardcom card. Please check the sticker to get the right one and go to this site to download driver for it (Does it have Centrino sticker ?).
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

New Hard Drive and drivers are not installing

I recently got a new hard drive and now I cannot install drivers from the recovery disk.
mobile intel 4 series express chipset family
nuvoton CIR Transceiver
nuvoton HID CIR Receiver
Atheros AR8131 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
INtel High definition Audion HDMI
I receive device status for each one of:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged or that might be malicious software from an unknown source (code 52)
HELP

Which computer? There is a label on the bottom.
Exactly which hard drive is it? Give us the specific model so we can look it up.
Windows cannot verify the digital signature for the drivers required for this device.
If you have restored the hard disk to its original out-of-the-box contents using Toshiba recovery media, that probably means you restored to a drive with the new advanced-format technology.
Try installing this driver.
Intel Rapid Storage Technology
More information in this thread.
After Restoring to New Hard Disk, No Windows Update - a Fix
Please let us know how it goes.
-Jerry

SCCM 2012 SP1 Distribution points not updating

The package that holds my MS updates is not updating on my distribution points ever since I upgraded to SP1. If I remove the package from the distribution points and then add it back it will work fine. This is happening to me every I add updates to this
package. Below is part of the smsdpprov.log file from one of my distro points.
[C90][Thu 02/14/2013 11:03:51]:Content 'f16906f8-d1d4-44df-8cf7-35dd7428893a' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:55]:Content '1ebc4751-063f-46dd-a7ae-096cce3545dc' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:56]:Content 'b2903470-59e0-4d89-a1a5-808b58c9fd4e' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:03:58]:Content 'f058ee07-a66e-4bdf-8a53-7cc30affe333' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:00]:Content '03546ec3-2613-46ce-bf0c-a6064149f2c6' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:03]:Content '7492e432-b69c-478c-8c7b-7c2396302eb4' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:05]:Content '995a1a82-6d7c-4fb6-9e1b-8cfac070b787' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:06]:Content 'a0a2a75d-beab-49ca-96e5-e03afa98dc8f' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:08]:Content '21061204-1d54-4262-bc90-cf5922191940' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:11]:Content 'ce9e07ad-1467-4da5-bf03-8c7013743d34' for package 'ENS00006' has been added to content library successfully
[C90][Thu 02/14/2013 11:04:14]:MoveFile failed for \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f.ENS00006.temp to \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f
[C90][Thu 02/14/2013 11:04:14]:FileRename failed; 0x80070005
[C90][Thu 02/14/2013 11:04:14]:CContentDefinition::Finalize failed; 0x80070005
[C90][Thu 02/14/2013 11:04:14]:Failed to finalize content '6178f7ae-a640-4e04-a851-abd13239a50f' for package 'ENS00006'. Error code: 0X80070005

I've got the same issue. When I look at the smsdpprov.log on the distribution point, this is what I see.
[EB0][Thu 10/31/2013 08:39:08]:Content '0a3fe62c-58ce-47c7-b635-e23407515ecb' for package 'ONB0007A' has been added to content library successfully
[EB0][Thu 10/31/2013 08:39:08]:Content '809b4727-78b3-48bd-85ca-f2fdcf668297' for package 'ONB0007A' has been added to content library successfully
[EB0][Thu 10/31/2013 08:39:08]:MoveFile failed for
\\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93.ONB0007A.temp to
\\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93
[EB0][Thu 10/31/2013 08:39:08]:FileRename failed; 0x800700b7
[EB0][Thu 10/31/2013 08:39:08]:CContentDefinition::Finalize failed; 0x800700b7
[EB0][Thu 10/31/2013 08:39:08]:Failed to finalize content '5263454e-e3de-49e5-a077-48dba0eefe93' for package 'ONB0007A'. Error code: 0X800700B7
If I reboot the DP, then the package gets updated. I'd like to figure out how to make this not happen :)

SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.

Hi All,
Good day to all you.
I would like to seek all your help on this issue that i have encountering.
My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
Error:
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
below are wsyncmgr.log:
Setting sync alert to active state on site C01 SMS_WSUS_SYNC_MANAGER (0x1690)
Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Starting Sync SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Read SUPs from SCF for MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Found active SUP MYHQKUL990707S.sdb.com from SCF File.
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
5776 (0x1690)
Synchronizing WSUS server MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
5776 (0x1690)
Using account sdb\SCCM-Admin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Synchronizing WSUS server myhqkul990707s.sdb.com ...
SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
440 (0x01B8)
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
All response is much appreciated
Thank You

Hi,
I recommend you look at the IIS log. Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 7 drivers will not install for Printsmart B209a

Ok, I have tried to solve this for the better part of 2 days on my own.. I have tried every solution I can find by google and forums..
In the device manger it show that my printer drivers are not installed, when i try to install them Windows tells me the drives are not digtally signed and I and not it's not sure they are committable with my printer.. When I tell it to go ahead and intestinal them it tries then tells me it can not due to one of the above..
I have uninstalled the drivers and reinstalled them so many times I have lost count.. I have used a uninstaller to make sure I got every little piece of the driver I can find..
Now when I try to install them, it hangs at about 89% and tells me it is waiting for a SPL response from the printer.. and that never happens.
So can someone please help me with these two problems..
Thanks in advance for your knowledge, time and effort..

Make sure that you run the correct OS bit version download for your computer. Do you have 64 bit or 32 bit win 7? did you install software by cd or online?
if it hangs at 89% , that means your firewall is limiting the installation.
what is the brand of your anti-virus software?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

SCCM 2012 SP1 drivers are not installed

Similar Messages

Maybe you are looking for