SCCM 2012 SP1 Install fails at splash screen: Failed to create process of setupWpf.exe

Hello,
I can't seem to get past the initial install screen. When I click install I receive what is shown in the screen shot. The error in question is "Failed to create process of SetupWpf.exe" This is what I get after i click install. The error above
that one "WinHttpReceiveresponse failed 80072ee7" is what I get when I tried to download the latest updates from the splash screen. It was on like update 44 of 56 when it failed but I am not sure I need to pursue that one. I cant even get the insall
going.
Phil Balderos

I am also having the same issue..
I can start the sccm 2012 installation piror to installing SQL 2012 SP1. Once SQL installation is complete, and try to install sccm 2012 -> issue occur. Is this a sql issue, or a sccm 2012 issue.. I have download the SQL 2012 and SCCM 2012 FROM MS
twics.. I have rebuilt my lab twice already ...
Any help, not sure what step I am missing....
Hello Yuyut,
This issue is related to CM12 (not nessarly a widly known issue) perhaps something with the ISO. The copy I was using was from our MSDN subscription which kept failing. I downloaded it twice and still same issue. Since  I am setting this up as a lab
for testing purposes I just ended up downloaded the 180 day evaluation and has worked for me so far. So again this is not related to SQL as I have noticed.
Thorsten did mention on this thred that I should check permissons of the account I was trying to install it from. That was not my issue but you could give that a look also.
Phil
Phil Balderos

Similar Messages

  • Reporting services keep failing on SCCM 2012 SP1

    I have SCCM 2012 SP1 install with SSRS 2012 install on same server 2008 R2 server.
    Reporting services keep failing with the following message when trying to START the service from the Reporting Services Configuration Manager Console
    System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed.
       at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout)
       at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
    Thx,
    Joe
    Thx, Joe

    Good advice Garth, but I have opened over 5 cases to try to resolve this and several other issues with my troublesome SCOM 2012 SP1 upgrade. That is why I am also sending it to the community in hope they can provide assistance.
    CSS will only work on one specific issue and in most cases these are targeted bandaid fixes that DO NOT address the underlying or related issues. I a left to opening many tickets and still floundering with a unreliable product.
    It seems to only be with System Center. All other products by Microsoft seem to be reliable and predicable and are easily supported using break fix support model of the current MS teams.
    It is SQL (SSRS) that controls subscriptions not CM12. CM12 only leverages the APIs provided by SQL (SSRS).
    I hate to say this but Why do you think this problem has anything to do with CM12?
    If CSS tell you to re-create the subscription and the problem re-occurs then I would re-open the ticket and tell them that the problem is NOT fixed and to continue working on it.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Software Update error - SCCM 2012 SP1

    HI,
    I have SCCM 2012 SP1 installed on Windows server 2008 R2 server. I have configured SUP role and tried sync from sccm console. I get the below error.
    LOg:
    WSUS sync running~  $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:11:42.047+00><thread=3840 (0xF00)>
      WSUS sync running~  $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:12:42.255+00><thread=3840 (0xF00)>
    Microsoft.SystemsManagementServer.WSUS.WSUSMSPException: WSUS sync failed with UssCommunicationError: ~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.IsSyncRunning()  $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.462+00><thread=3840
    (0xF00)>
    Done using DEVSWAD\SWDTR-SRV-CMPATCH credentials~  $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
    Failed to set Subscriptions on the WSUS
    . Error:(-2146233088)Unknown error 0x80131500~  $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
    STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=3840 GMTDATE=Thu Jan 30 14:13:12.479 2014
    I have configured proper proxy account which can connect to microsoft website and the port i have configured in proxy to allow is
    80 and 443. I feel the port i need to allow may be i am not sure 8530 and 8531. Or 80 and 443 is fine. Please help
    Regards, Pratap

    It says to check WCM.log which i posted above
    wsync log:
    Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.118+00><thread=4388 (0x1124)>
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 14:02:14.119 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please
    refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
    Sync failed. Will retry in 60 minutes  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
    Setting sync alert to active state on site SCW  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.123+00><thread=4388 (0x1124)>
    Sync time: 0d00h00m00s  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.132+00><thread=4388 (0x1124)>
    Wakeup for a polling cycle  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:14.495+00><thread=4388 (0x1124)>
    Starting Sync  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.157+00><thread=4388 (0x1124)>
    Performing sync on retry schedule  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.163+00><thread=4388 (0x1124)>
    Read SUPs from SCF for DCMPSTPV01.devswad.net  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.577+00><thread=4388 (0x1124)>
    Found 1 SUPs  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.830+00><thread=4388 (0x1124)>
    Found active SUP DCMPSTPV01.devswad.net from SCF File.~  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.833+00><thread=4388 (0x1124)>
    Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.876+00><thread=4388 (0x1124)>
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 15:02:15.882 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please refer
    to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.892+00><thread=4388 (0x1124)>
    Sync failed. Will retry in 60 minutes  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.912+00><thread=4388 (0x1124)>
    Setting sync alert to active state on site SCW  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.915+00><thread=4388 (0x1124)>
    Sync time: 0d00h00m01s  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.024+00><thread=4388 (0x1124)>
    Next scheduled sync is a retry sync at 31/01/2014 16:02:15  $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.151+00><thread=4388 (0x1124)>
    Regards, Pratap

  • SCCM 2012 SP1 Application catalog website

    Architecture:
    SCCM 2012 SP1 installed on Windows 2012
    Application catalog website issue----->
    In SMSAWEBSVCSetup.log we found "IIS component ASP net not installed please install it.
    Installlation failed Error Code:125"
    whereas we have installed ASP.net already (registering ASp. net not supported please review the MS article: "http://support.microsoft.com/kb/2736284 "
    Let know me know what could be the cause.

    All depending on how/what order you install the IIS components sometimes it's just to reinstall IIS. To me it sounds like the .Net Framework http-activation and non-activation features are missing.
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • SCCM 2012 SP1 - SUP Error

    Hi guys,
    i upgraded my SCCM 2012 test Environment to SP1. I have only one Primary Site Server which holds all Roles. Everything seems to work fine except the SUP Role. If i try to synchronize the latest Updates it says that it cannot find a WSUS Server
    and i should check WCM.LOG.
    Within WCM.LOG i can find the following Messages:
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 08:56:44 3620 (0x0E24)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:07:56 3620 (0x0E24)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
        SUP0: CM01.TEST.LOCAL, group = , nlb = SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Bad Configuration, SUPs present but no default SUP SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Default SUP not specified SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Setting new configuration state to 0 (WSUS_CONFIG_NONE) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Waiting for changes for 47 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    So in General this tells me that it can find a SUP but this one is not specified as a DEFAULT SUP. How can i tell SCCM that this is my Default SUP? (I only have this one and it is configured to sync from Microsoft Update site). I have never seen
    this before so i guess this is related to SP1?
    PS: I also installed the 2 necessary WSUS Updates before i upgraded to SCCM SP1.
    Thanks in lot in advance.
    Stefan

    None of your solutions apply to WSUS 4.0 on Server 2012
    None of the specified patches applies or will run on a Windows 2012 Std server. They either report that WSUS 3 SP 2 isn't installed OR that the patch isn't applicable to the server version installed.
    Here is a excerpt of MY WCM.LOG
    I have a fully patched Windows 2012 Standard Server, Fully updated SCCM 2012 SP1 installed, and am connected to a fully patched SQL2012 Server on another fully patched Windows 2012 Std server.
    Ports 8530 and 8531 designated on both the WSUS 4.0 Role and SCCM 2012 SP1 system (both are on same server)
    SUP0: SCCM2012.xxdomainname.ORG, group = , nlb = ~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.496+420><thread=6052 (0x17A4)>
    Updating active SUP groups...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.503+420><thread=6052 (0x17A4)>
    Bad Configuration, SUPs present but no default SUP  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.510+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.525+420><thread=6052 (0x17A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.535+420><thread=6052 (0x17A4)>
    Waiting for changes for 11 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.543+420><thread=6052 (0x17A4)>
    Wait timed out after 11 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:04:54.569+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.577+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.585+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.592+420><thread=6052 (0x17A4)>
    Wait timed out after 60 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:04:54.714+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.721+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.728+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.734+420><thread=6052 (0x17A4)>
    Randall

  • Management Point fails after installing SCCM 2012 SP1

    I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
    1. Newly built Windows Server 2012 box
    2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
    The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
    SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
    [19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
    MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
    The error code is 80041002
    Error 25140. Setup was unable to compile the file CcmExec_Global.mof
    The error code is 80041002
    CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
    [19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
    [19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
    [19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
    MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
    Internal Error 25001. 80070057
    CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result. 
    Would really appreciate some help if anyone's fixed this issue

    I'm still struggling, I've uninstalled MP
    <04/16/14 08:06:59> SMSMP Setup Started....
    <04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
    <04/16/14 08:06:59> Deinstalling the SMSMP
    <04/16/14 08:06:59> No versions of SMSMP are installed.  Returning Success.
    <04/16/14 08:06:59> ~RoleSetup().
    Ran the command, Invoke-Command  {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
    Checked Namespace Instances to ensure '= ccm' is not longer there. 
    Rebooted Server and re-installed MP but it still fails
    <04/16/14 08:37:26> ====================================================================
    <04/16/14 08:37:26> SMSMP Setup Started....
    <04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
    <04/16/14 08:37:26> Installing Pre Reqs for SMSMP
    <04/16/14 08:37:26>         ======== Installing Pre Reqs for Role SMSMP ========
    <04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP 
    <04/16/14 08:37:26> Pre Req MSXML60 found.
    <04/16/14 08:37:26> No versions of MSXML60 are installed.  Would install new MSXML60.
    <04/16/14 08:37:26> Enabling MSI logging.  msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
    <04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi 
    <04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
    <04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
    <04/16/14 08:37:26> Pre Req SqlNativeClient found.
    <04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
    <04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
    <04/16/14 08:37:26>         ======== Completed Installation of Pre Reqs for Role SMSMP ========
    <04/16/14 08:37:26> Installing the SMSMP
    <04/16/14 08:37:26> Passed OS version check.
    <04/16/14 08:37:26> IIS Service is installed.
    <04/16/14 08:37:26> No versions of SMSMP are installed.  Installing new SMSMP.
    <04/16/14 08:37:26> Enabling MSI logging.  mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
    <04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
    SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
    <04/16/14 08:37:26> mp.msi exited with return code: 1603
    <04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
    <04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
    <04/16/14 08:37:26> ~RoleSetup().
    On checking I don't seem to have anything in IIS, no default web site.
    I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
    Any assistance would be greatly appreciated.
    Thanks

  • [Forum FAQ] Management Point fails after installing SCCM 2012 SP1

    Symptom:
    The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
    You might see some errors in mpMSI.log like listed below.
    “Setup was unable to compile the file CcmExec_Global.mof”
    “The error code is 80041002”
    Cause:
    Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
    Resolution:
    1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
    2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete  _NAMESPACE.Name=”ccm”
    3. Install Management Point.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Symptom:
    The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
    You might see some errors in mpMSI.log like listed below.
    “Setup was unable to compile the file CcmExec_Global.mof”
    “The error code is 80041002”
    Cause:
    Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
    Resolution:
    1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
    2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete  _NAMESPACE.Name=”ccm”
    3. Install Management Point.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

  • SCCM 2012 SP1 fails to install OSD of Captured Image

    I installed Windows Server 2012, Visual Studio Pro 2008, 2010, 2012 and SQL Server 2012 onto a machine. Configured the settings on Windows Server 2012 and SQL 2012 to how the Developers requested to be configured. Ran the Capture Media from SCCM 2012 SP1,
    saved to the designated network share. Capture was successful.
    I create a TS to deploy the image to the other Dev Servers but it reboots to say no valid operating system found. I checked Monitoring for the Deployment I see the Task sequence but has the following error: Device - Unknown, MessageID - 11170, Description
    - The task sequence manager could not successfully complete execution of the task sequence.
    I see in the Apply Operation System from a captured image shows 1-1, 2-2, or 3-3. Does it matter which one I select and if so what does the numbers mean?
    Any help is greatly appreciated, thanks!!

    Hi Blacksuit,
    Those numbers of the captured image stand for the indexes that are part of your WIM.  And yes, it does matter which one you select.  In the ConfigMgr console, go to your Software Library > Operating Systems > Operating System Images and select
    the image you imported into ConfigMgr.  Then at the bottom, click the Details tab to display your indexes.  The index that contains your OS will have an OS Version and a description.  The other indexes will be data images and not contain any
    information in the Details tab.  You'll need to choose the index (number) that contains the OS for the Apply OS step.  To apply the data image indexes, use the Apply Data Image task sequence step and specify the partitions to apply the images
    too before the Apply OS step.
    Good luck!
    -Matt 

  • SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip

    we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we  run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
    task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
    Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
    Find below the smsts.log file
    Main error in the log file is
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151.    TSMBootstrap    2/12/2014 1:05:41 PM    1984 (0x07C0)
    Xtract from LOG
    SMSTSRebootDelay=60    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue.    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootRequested=WinPE    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    Process completed with exit code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    !--------------------------------------------------------------------------------------------!    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Successfully completed the action (Restart to Windows PE) with the exit win32 code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionRetCode=0    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionSucceeded=true    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Clear local default environment    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Executing command line: "bcdedit.exe"    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    CreateProcess failed. Code(0x80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Command line execution failed (80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Staging boot image UNB0003A    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    ResolveSource flags: 0x00000000    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    SMSTSPersistContent: . The content for package UNB0003A will be persisted    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    WinHttp credentials set    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    List of files to be downloaded    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim     TSManager    2/12/2014 1:02:22 AM    1876
    (0x0754)
    VerifyContentHash: Hash algorithm is 32780    TSManager    2/12/2014 1:02:22 AM    1876 (0x0754)
    Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Copying boot image locally...    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Failed to find ADK installation root registry key    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Applying image 1 to volume E:\_SMSTaskSequence\WinPE    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Capturing WinPE bootstrap settings    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    ==============================[ OSDNetSettings.exe ]===========================    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    No adapters found with non-empty DNSDomainSuffixSearchOrder    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Adapter "ROOT\SYMC_TEEFER2MP\0000" not found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    OSDNetSettings finished: 0x00000000    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Installing boot image to hard drive    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Backing up existing boot system before trying to set up new boot system    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    BootLoader::backup: C:\, E:\_SMSTaskSequence\backup    TSManager    2/12/2014 1:02:39 AM    1876 (0x0754)
    BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR    TSManager    2/12/2014 1:02:45 AM    1876 (0x0754)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:46 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Expand a string: %_SMSTSMDataPath%\Logs    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    <![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">  
          1/1/1601 12:00:00 AM    1995266923 (0x76ED5B6B)
    ==============================[ TSBootShell.exe ]==============================    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Debug shell is enabled    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Waiting for PNP initialization...    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Booted from fixed disk    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Found config path E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Restoring boot system from E:\_SMSTaskSequence\backup    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Successfully loaded the BCD boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully loaded an exported NTLDR boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    BootLoader::restore: E:\_SMSTaskSequence\backup, C:\    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully merged logs from cache.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading bootstrap settings from E:\_SMSTaskSequence\WinPE    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading saved WinPE settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00'    TSBootShell  
     2/12/2014 1:04:06 AM    796 (0x031C)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring WinPE bootstrap settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating WinPE answer file    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Setting hive location to "X:\windows\system32"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Getting namespace "Microsoft-Windows-Setup" for architecture "x86"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring global network settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Join type:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    IP filter sec enabled: false    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    No adapters found in environment.  Performing global configuration only.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Executing command line: wpeinit.exe -winpe    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Starting DNS client service.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    No adapters found in environment.  Performing global finalization only.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing global network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS for WINS enabled: false    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    LMHosts file enabled: true    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Host lookup file:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    WINS scope ID:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    ==============================[ TSMBootStrap.exe ]==============================    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Failed to open PXE registry key. Not a PXE boot.    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Resuming Task Sequence in WinPE    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat".    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Updating the local data path in the Task Sequencing Environment.    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxSize to 1000000    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxHistory to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogLevel to 0    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogEnabled to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogDebug to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Command line for extension .exe is "%1" %*    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    ==========[ TsProgressUI started in process 2004 ]==========    TsProgressUI    2/12/2014 1:05:41 AM    2008 (0x07D8)
    Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
    In dire need of help,
    I have already gone through the below articles on the NET
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
    Awating response,
    Hasan Reza

    Well Finally I sorted my issue ,
    Just want to share the solution, may be it would be helpful to some one else and save some times
    The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
    1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
    due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
    2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
    Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
    As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
    All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
    Thanks,
    Hasan Reza.
    http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen

  • WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

    Hi,
    I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
    wsyncmgr:
    Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
    SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
    3668 (0x0E54)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
    on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
    3668 (0x0E54)
    Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
    1/9/2015 12:00:00 PM 3668 (0x0E54)
    WCM:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Remote configuration failed on WSUS Server.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
    Regards,
    Malwinder

    WCM:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    It's not only a matter of installing the console, but also those hotfixes on a remote server ...
    Torsten Meringer | http://www.mssccmfaq.de

  • Error installing SCCM 2012 SP1 client

    Hi All,
    I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on a couple of windows 2008 R2 servers.
    Error 1904. Module C:\Windows\CCM\StatusAgentProxy.dll failed to register.  HRESULT -2147010895
    The ccmsetup.log details the same message without Error 1904 indicated.
    I am installing the client using the SUP method, which has worked without any problems on all 180 other windows servers I have done.  ccmsetup starts and downloads all pre reqs required for the client rollout, but it then hits this error and does not
    finish the installation.
    Any help would be much appreciated?
    Regards PowerShell90

    Hi,
    I've seen this issue a couple of times and usually it's related to incorrect Versions of C++ Library installed on the system you try to install the Client. Try and remove any existing installations, reboot and install this version;
    http://www.microsoft.com/en-us/download/details.aspx?id=26368
    Let me know how it goes.

  • SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

    Hi there
    Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
    I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
    I've tried injecting a single update, five updates and ten updates, no difference, same messages.
    We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
    In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
    "Failed to find or access the update binaries to be applied on the image."
    That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
    When I looked at the OfflineServicingMgr.log file, I see the following entries:
    Processing image at index 1        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:52:49        8272 (0x2050)
    Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite'        SMS_OFFLINE_SERVICING_MANAGER       
    14/06/2014 14:52:49        8272 (0x2050)
    Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31       
    8272 (0x2050)
    Failed to find properties of file 4        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
    UnMounting Image (Commit Changes = 0) ...        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
    Completed processing image package PackageID. Status = Failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    Updated history for image package PackageID in the database        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    Schedule processing failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    Processing completed for Schedule with ID 16777237        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
    STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0        SMS_OFFLINE_SERVICING_MANAGER       
    14/06/2014 14:54:04        8272 (0x2050)
    Schedule processing thread stopped        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:05        8272 (0x2050)
    I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
    "Completed processing image package PackageID. Status = Failed"
    As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
    If anyone has encountered this before, I'd appreciate any information you have.
    Regards,
    John.

    Hi,
    I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
    Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
    After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
    over there 
    'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
    Hope this will help!
    Cheers | Navdeep Sidhu

  • Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

    Hi,
    I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily. 
    I just installed Office 2013 on this system and have activated it as necessary.  The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM.  I have other systems with
    Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
    If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
    I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
    What can I check to try and determine what the problem is?
    Thanks in advance,
    Nick

    Yes, the 8.1 system is a member of collection where the update deployment is targeted.
    Are there any specific logs I should check in the client?  If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
    in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Deployed Windows 7 Image failing to start -SCCM 2012 SP1

    Hello, I am deploying windows 7 image using SCCM 2012 SP1, the installation goes thru fine but when it is in the process of restart, a blue screen is displayed for a split second and then it tries to reboot again with same results. Are there any logs on
    the SCCM server I can check to see where the problem may be?

    This generally means inaccessible boot device. How are you partitioning the drive and applying the image?
    This is one way to do it
    http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part_18.html
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Cannot install SCCM 2012 SP1 CU4

    Hi,
    I just tried to apply CU4 over one of my SCCM 2012 SP1 CU3 deployments and I receive the following message during the initial verification phase:
    Server update status: This update applies to product version 5.0.7804. The installed version on this computer is 5.0.7958.1000. This update is not applicable to this computer.
    Console update status: No serviceable configuration manager role was found on the local system.
    If I engage the verification phase on this installation for CU2 and CU3 there is no problem at all, so this must be a CU4 package specific error.
    Anybody experiencing the same behavior ?

    The latest CU that I see for SCCM 2012 SP1 is SP1 Cumulative Update 3, are you sure you are working with the proper file?  .
    CU4 was released this week:
    http://blogs.technet.com/b/configurationmgr/archive/2014/01/29/now-available-cumulative-update-4-for-system-center-2012-configuration-manager-service-pack-1.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for

  • F4IF_INT_TABLE_VALUE_REQUEST and search in fields

    Hi Friends, I want to make a search operation with F4IF_INT_TABLE_VALUE_REQUEST. My code is;   DATA:   BEGIN OF HELP_LIST OCCURS 0,          ID LIKE ZLIST-ID,          NAME LIKE ZLIST-NAME,         SNAME LIKE ZLIST-SNAME,   END OF HELP_LIST,   FIELD_

  • Batch determination -sort rule -reg

    hi, requirement is : Through COR2 , for the process order's component  when  batch determination is done , Batch determination should first select  for the unrestricted stock in the storage location and once all the unrestricted stock is consumed the

  • Is there a way to import a site layout from destop to phone or tablet in MUSE?

    Is there a way to import the esktop layout contents to the tablet or phone layouts instead of do a copy-paste and reorganize the content to the new size and proportion? or can this be done ina an automated-semi automated way? Thanks

  • Removing Apps from OSX 10.6 Snow Leopard to make it faster with 2GB

    Hi Everybody, I have a MacMini 1.1 that happes to have a limitation of memory of 2GB. It is siting as a Set Top Box for our TV. I am going to upgrade from Tiguer to Snow Leopard. I know I am going to have a performance problem because of Snow Leopard

  • Design & Web Premium CS6 WIN UE reinstall

    I installed this on my computer and it is only a 32 bit and I now have a 64 bit.  I need to install this onto another computer now, that is better.  It was down by download.  I just need to be able to download it.  I have the serial number already.