SCCM 2012 SP1 - Patch error
Hi,
I am getting the below error in WCM.log when i try to sync with microsoft website.Please help
Log:
DB Server not detected for SUP DCMPSTPV01.devswad.net from SCF File. skipping.~ $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:08:39.994+00><thread=800 (0x320)>
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:08:40.006+00><thread=800 (0x320)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2136 TID=800 GMTDATE=Wed Jan 29 14:08:40.006 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source
not found on site SCW. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-29-2014
14:08:40.007+00><thread=800 (0x320)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:08:40.008+00><thread=800 (0x320)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:08:40.008+00><thread=800 (0x320)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:08:40.018+00><thread=800 (0x320)>
Wakeup by SCF change $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:08:45.056+00><thread=800 (0x320)>
Next scheduled sync is a retry sync at 29/01/2014 15:08:40 $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:08:50.208+00><thread=800 (0x320)>
Thread terminated by service request. $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:10:15.206+00><thread=800 (0x320)>
SMS_EXECUTIVE started SMS_WSUS_SYNC_MANAGER as thread ID 3660 (0xE4C). $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:11:19.045+00><thread=7148 (0x1BEC)>
Log level 2 $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:11:19.048+00><thread=3660 (0xE4C)>
Next scheduled sync is a retry sync at 29/01/2014 15:08:40 $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:11:22.063+00><thread=3660 (0xE4C)>
Wakeup by SCF change $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:12:00.746+00><thread=3660 (0xE4C)>
Next scheduled sync is a retry sync at 29/01/2014 15:08:40 $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:12:05.857+00><thread=3660 (0xE4C)>
Wakeup by SCF change $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:12.973+00><thread=3660 (0xE4C)>
Next scheduled sync is a retry sync at 29/01/2014 15:08:40 $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:30.358+00><thread=3660 (0xE4C)>
Wakeup by inbox drop $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:33.831+00><thread=3660 (0xE4C)>
Found local sync request file $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:40.027+00><thread=3660 (0xE4C)>
Starting Sync $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:40.028+00><thread=3660 (0xE4C)>
Performing sync on local request $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:40.028+00><thread=3660 (0xE4C)>
Read SUPs from SCF for DCMPSTPV01.devswad.net $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:40.036+00><thread=3660 (0xE4C)>
Found 1 SUPs $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:40.680+00><thread=3660 (0xE4C)>
Found active SUP DCMPSTPV01.devswad.net from SCF File.~ $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:40.680+00><thread=3660 (0xE4C)>
DB Server not detected for SUP DCMPSTPV01.devswad.net from SCF File. skipping.~ $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:40.681+00><thread=3660 (0xE4C)>
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:41.903+00><thread=3660 (0xE4C)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2640 TID=3660 GMTDATE=Wed Jan 29 14:14:41.904 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update
source not found on site SCW. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
$$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:41.905+00><thread=3660 (0xE4C)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:41.907+00><thread=3660 (0xE4C)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:41.907+00><thread=3660 (0xE4C)>
Sync time: 0d00h00m01s $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:42.186+00><thread=3660 (0xE4C)>
Next scheduled sync is a retry sync at 29/01/2014 15:14:41 $$<SMS_WSUS_SYNC_MANAGER><01-29-2014 14:14:42.392+00><thread=3660 (0xE4C)>
Regards, Pratap
Paul i got it, but when i select remote SQL server. I get the below error
Log@
2014-02-03 12:16:04 Error MWUSSetup DoInstall: Wsus setup failed (Error 0x80070643: Fatal error during installation.)
2014-02-03 12:24:13 Success MWUSSetup Detected that setup was launched through Server Manager
2014-02-03 12:24:15 Success MWUSSetup Validating pre-requisites...
2014-02-03 12:24:15 Error MWUSSetup Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the
file specified.)
2014-02-03 12:24:15 Error MWUSSetup WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
2014-02-03 12:24:42 Error MWUSSetup ExecuteQuery: Failed to execute SQL query SELECT SchemaVersion From SUSDB..tbSchemaVersion WHERE ComponentName= 'CoreDB' (Error 0x80040E14)
2014-02-03 12:24:42 Error MWUSSetup ExecuteQueryGetSingleResult: Failed to execute query SELECT SchemaVersion From SUSDB..tbSchemaVersion WHERE ComponentName= 'CoreDB' (Error
0x80040E14)
2014-02-03 12:24:42 Error MWUSSetup CheckDbConnection: Failed to run SQL query SELECT SchemaVersion From SUSDB..tbSchemaVersion WHERE ComponentName= 'CoreDB'. Assuming SUSDB
of incorrect version... (Error 0x80040E14)
2014-02-03 12:25:16 Success MWUSSetup Initializing installation details
2014-02-03 12:25:16 Success MWUSSetup Skipping Asp.Net install since not running on win2k3...
2014-02-03 12:25:16 Success MWUSSetup Installing wYukon using ocsetup
2014-02-03 12:25:16 Success MWUSSetup Windows Internal database is already installed on this machine
2014-02-03 12:25:16 Success MWUSSetup Installing WSUS...
2014-02-03 12:25:24 Success CustomActions.Dll Unable to get INSTALL_LANGUAGE property, calculating it...
2014-02-03 12:25:24 Success CustomActions.Dll The system language ENG is not supported. Using English resources...
2014-02-03 12:25:25 Success CustomActions.Dll Successfully set propery of WSUS admin groups' full names
2014-02-03 12:25:26 Success CustomActions.Dll .Net framework path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319
2014-02-03 12:25:34 Success CustomActions.Dll Creating user group: WSUS Reporters with Description: WSUS Administrators who can only run reports on the Windows Server Update Services server.
2014-02-03 12:25:34 Success CustomActions.Dll Creating WSUS Reporters user group
2014-02-03 12:25:34 Success CustomActions.Dll WSUS Reporters user group already exists
2014-02-03 12:25:34 Success CustomActions.Dll Successfully created WSUS Reporters user group
2014-02-03 12:25:34 Success CustomActions.Dll Creating user group: WSUS Administrators with Description: WSUS Administrators can administer the Windows Server Update Services server.
2014-02-03 12:25:34 Success CustomActions.Dll Creating WSUS Administrators user group
2014-02-03 12:25:34 Success CustomActions.Dll WSUS Administrators user group already exists
2014-02-03 12:25:34 Success CustomActions.Dll Successfully created WSUS Administrators user group
2014-02-03 12:25:34 Success CustomActions.Dll Successfully created WSUS user groups
2014-02-03 12:25:34 Success CustomActions.Dll Succesfully set binary SID property
2014-02-03 12:25:34 Success CustomActions.Dll Succesfully set binary SID property
2014-02-03 12:25:34 Success CustomActions.Dll Successfully set binary SID properties
2014-02-03 12:26:40 Success CustomActions.Dll CopyADMFile:The system locale ENG is not supported. Using English...
2014-02-03 12:28:50 Info IISCustomAction Performing Setup Action, Command /Install
2014-02-03 12:29:10 Info IISCustomAction Command /Install Succeeded
2014-02-03 12:31:26 Success MWUSSetup WSUS Installed Successfully
2014-02-03 12:31:26 Success MWUSSetup Setup completed successfully
2014-02-03 14:32:57 Success MWUSSetup Detected that setup was launched through Server Manager
2014-02-03 14:32:58 Success MWUSSetup Validating pre-requisites...
2014-02-03 14:32:59 Error MWUSSetup Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
2014-02-03 14:32:59 Error MWUSSetup WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
2014-02-03 14:33:45 Success MWUSSetup Initializing installation details
2014-02-03 14:33:45 Success MWUSSetup Skipping Asp.Net install since not running on win2k3...
2014-02-03 14:33:45 Success MWUSSetup Installing WSUS...
2014-02-03 14:33:47 Success CustomActions.Dll Unable to get INSTALL_LANGUAGE property, calculating it...
2014-02-03 14:33:47 Success CustomActions.Dll The system language ENG is not supported. Using English resources...
2014-02-03 14:33:48 Success CustomActions.Dll Successfully set propery of WSUS admin groups' full names
2014-02-03 14:33:48 Success CustomActions.Dll .Net framework path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319
2014-02-03 14:33:50 Success CustomActions.Dll Creating user group: WSUS Reporters with Description: WSUS Administrators who can only run reports on the Windows Server Update Services server.
2014-02-03 14:33:50 Success CustomActions.Dll Creating WSUS Reporters user group
2014-02-03 14:33:51 Success CustomActions.Dll Successfully created WSUS Reporters user group
2014-02-03 14:33:51 Success CustomActions.Dll Creating user group: WSUS Administrators with Description: WSUS Administrators can administer the Windows Server Update Services server.
2014-02-03 14:33:51 Success CustomActions.Dll Creating WSUS Administrators user group
2014-02-03 14:33:51 Success CustomActions.Dll Successfully created WSUS Administrators user group
2014-02-03 14:33:51 Success CustomActions.Dll Successfully created WSUS user groups
2014-02-03 14:33:51 Success CustomActions.Dll Succesfully set binary SID property
2014-02-03 14:33:51 Success CustomActions.Dll Succesfully set binary SID property
2014-02-03 14:33:51 Success CustomActions.Dll Successfully set binary SID properties
2014-02-03 14:34:36 Success CustomActions.Dll CopyADMFile:The system locale ENG is not supported. Using English...
2014-02-03 14:36:36 Error MWUSSetup InstallWsus: MWUS Installation Failed (Error 0x80070643: Fatal error during installation.)
2014-02-03 14:36:36 Error MWUSSetup CInstallDriver::PerformSetup: WSUS installation failed (Error 0x80070643: Fatal error during installation.)
2014-02-03 14:36:36 Error MWUSSetup CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
Regards, Pratap
Similar Messages
-
WSUS 4.0 and SCCM 2012 SP1 Sync Errors
SCCM 2012 SP1 is installed on a Windows 2012 Std server with the WSUS 4.0 Role installed.
All other links I have found list a 2008 R2 Server with WSUS 3.0 SP2 hence all the "fixes" revolve around hot fixes and patches/settings for WSUS 3.0 or 2008 R2 systems.
WSUS is set for port 8530/8531
SCCM SUP is set for ports 8530/8531
Both are on same machine (single site SCCM 2012 SP1 System)
What does Bad Configuration, SUPs present but no default SUP
mean and how do I fix it?
Recent entry in my WCM.LOG states:
SCF change notification triggered.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.401+420><thread=6052 (0x17A4)>
Populating config from SCF $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.454+420><thread=6052 (0x17A4)>
Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.481+420><thread=6052 (0x17A4)>
Changes in active SUP list detected. New active SUP List is:~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.489+420><thread=6052 (0x17A4)>
SUP0: SCCM2012.xxdomainnamexx.ORG, group = , nlb = ~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.496+420><thread=6052 (0x17A4)>
Updating active SUP groups...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.503+420><thread=6052 (0x17A4)>
Bad Configuration, SUPs present but no default SUP $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.510+420><thread=6052 (0x17A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.525+420><thread=6052 (0x17A4)>
Setting new configuration state to 0 (WSUS_CONFIG_NONE)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.535+420><thread=6052 (0x17A4)>
Waiting for changes for 11 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.543+420><thread=6052 (0x17A4)>
Wait timed out after 11 minutes while waiting for at least one trigger event. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:04:54.569+420><thread=6052 (0x17A4)>
Timed Out...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.577+420><thread=6052 (0x17A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.585+420><thread=6052 (0x17A4)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.592+420><thread=6052 (0x17A4)>
Wait timed out after 60 minutes while waiting for at least one trigger event. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:04:54.714+420><thread=6052 (0x17A4)>
Timed Out...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.721+420><thread=6052 (0x17A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.728+420><thread=6052 (0x17A4)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.734+420><thread=6052 (0x17A4)>
RandallHere is my WCM Log from this mornings "re-attempt"
Trigger event array index 0 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:22.156+420><thread=5540 (0x15A4)>
SCF change notification triggered.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.179+420><thread=5540 (0x15A4)>
Populating config from SCF $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.181+420><thread=5540 (0x15A4)>
Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.194+420><thread=5540 (0x15A4)>
No SUPs are present $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.199+420><thread=5540 (0x15A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.220+420><thread=5540 (0x15A4)>
Setting new configuration state to 0 (WSUS_CONFIG_NONE)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.224+420><thread=5540 (0x15A4)>
Waiting for changes for 24 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.226+420><thread=5540 (0x15A4)>
Trigger event array index 0 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:37.356+420><thread=5540 (0x15A4)>
SCF change notification triggered.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.388+420><thread=5540 (0x15A4)>
Populating config from SCF $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.493+420><thread=5540 (0x15A4)>
Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.541+420><thread=5540 (0x15A4)>
Changes in active SUP list detected. New active SUP List is:~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.543+420><thread=5540 (0x15A4)>
SUP0: SCCM2012.MORTONGENERAL.ORG, group = , nlb = ~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.546+420><thread=5540 (0x15A4)>
Updating active SUP groups...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.550+420><thread=5540 (0x15A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.553+420><thread=5540 (0x15A4)>
Setting new configuration state to 0 (WSUS_CONFIG_NONE)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.559+420><thread=5540 (0x15A4)>
Waiting for changes for 24 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.562+420><thread=5540 (0x15A4)>
Trigger event array index 1 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.593+420><thread=5540 (0x15A4)>
File notification triggered. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.596+420><thread=5540 (0x15A4)>
File notification triggered WCM Inbox.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.611+420><thread=5540 (0x15A4)>
Waiting for changes for 24 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.614+420><thread=5540 (0x15A4)>
Trigger event array index 1 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.617+420><thread=5540 (0x15A4)>
File notification triggered. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.620+420><thread=5540 (0x15A4)>
File notification triggered WCM Inbox.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.634+420><thread=5540 (0x15A4)>
Waiting for changes for 24 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.637+420><thread=5540 (0x15A4)>
Trigger event array index 0 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.640+420><thread=5540 (0x15A4)>
SCF change notification triggered.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.761+420><thread=5540 (0x15A4)>
Populating config from SCF $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.798+420><thread=5540 (0x15A4)>
Waiting for changes for 24 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.813+420><thread=5540 (0x15A4)>
Trigger event array index 1 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.823+420><thread=5540 (0x15A4)>
File notification triggered. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.826+420><thread=5540 (0x15A4)>
File notification triggered WCM Inbox.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.840+420><thread=5540 (0x15A4)>
Waiting for changes for 23 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.843+420><thread=5540 (0x15A4)>
Trigger event array index 1 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.846+420><thread=5540 (0x15A4)>
File notification triggered. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.849+420><thread=5540 (0x15A4)>
File notification triggered WCM Inbox.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:07.863+420><thread=5540 (0x15A4)>
Waiting for changes for 23 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:07.866+420><thread=5540 (0x15A4)>
Wait timed out after 23 minutes while waiting for at least one trigger event. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:30.913+420><thread=5540 (0x15A4)>
Timed Out...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.917+420><thread=5540 (0x15A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.920+420><thread=5540 (0x15A4)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.923+420><thread=5540 (0x15A4)>
Wait timed out after 60 minutes while waiting for at least one trigger event. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:31.041+420><thread=5540 (0x15A4)>
Timed Out...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.045+420><thread=5540 (0x15A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.048+420><thread=5540 (0x15A4)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.051+420><thread=5540 (0x15A4)>
Randall -
Hi guys,
i upgraded my SCCM 2012 test Environment to SP1. I have only one Primary Site Server which holds all Roles. Everything seems to work fine except the SUP Role. If i try to synchronize the latest Updates it says that it cannot find a WSUS Server
and i should check WCM.LOG.
Within WCM.LOG i can find the following Messages:
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 08:56:44 3620 (0x0E24)
Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:07:56 3620 (0x0E24)
SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
SUP0: CM01.TEST.LOCAL, group = , nlb = SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
Bad Configuration, SUPs present but no default SUP SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
Default SUP not specified SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
Setting new configuration state to 0 (WSUS_CONFIG_NONE) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
Waiting for changes for 47 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
So in General this tells me that it can find a SUP but this one is not specified as a DEFAULT SUP. How can i tell SCCM that this is my Default SUP? (I only have this one and it is configured to sync from Microsoft Update site). I have never seen
this before so i guess this is related to SP1?
PS: I also installed the 2 necessary WSUS Updates before i upgraded to SCCM SP1.
Thanks in lot in advance.
StefanNone of your solutions apply to WSUS 4.0 on Server 2012
None of the specified patches applies or will run on a Windows 2012 Std server. They either report that WSUS 3 SP 2 isn't installed OR that the patch isn't applicable to the server version installed.
Here is a excerpt of MY WCM.LOG
I have a fully patched Windows 2012 Standard Server, Fully updated SCCM 2012 SP1 installed, and am connected to a fully patched SQL2012 Server on another fully patched Windows 2012 Std server.
Ports 8530 and 8531 designated on both the WSUS 4.0 Role and SCCM 2012 SP1 system (both are on same server)
SUP0: SCCM2012.xxdomainname.ORG, group = , nlb = ~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.496+420><thread=6052 (0x17A4)>
Updating active SUP groups...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.503+420><thread=6052 (0x17A4)>
Bad Configuration, SUPs present but no default SUP $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.510+420><thread=6052 (0x17A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.525+420><thread=6052 (0x17A4)>
Setting new configuration state to 0 (WSUS_CONFIG_NONE)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.535+420><thread=6052 (0x17A4)>
Waiting for changes for 11 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.543+420><thread=6052 (0x17A4)>
Wait timed out after 11 minutes while waiting for at least one trigger event. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:04:54.569+420><thread=6052 (0x17A4)>
Timed Out...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.577+420><thread=6052 (0x17A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.585+420><thread=6052 (0x17A4)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.592+420><thread=6052 (0x17A4)>
Wait timed out after 60 minutes while waiting for at least one trigger event. $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:04:54.714+420><thread=6052 (0x17A4)>
Timed Out...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.721+420><thread=6052 (0x17A4)>
Default SUP not specified $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.728+420><thread=6052 (0x17A4)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.734+420><thread=6052 (0x17A4)>
Randall -
Sccm 2012 sp1 sms_object_replication_manager error
Hello,
Since the migration of SCCM 2012 to
SCCM 2012 SP1, I have a
critical error on the error component
SMS_replication_object_manager 6004
Here is an excerpt of the log with
cmtrace objreplmgr.log on:
+++Completed processing CIN notification files SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 16:26:07 5240 (0x1478)
+++Begin processing changed GCA objects SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 16:26:07 5240 (0x1478)
STATMSG: ID=6004 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OBJECT_REPLICATION_MANAGER" SYS=NONETTE.GI.LCL SITE=G10 PID=5964 TID=5240 GMTDATE=mer. mars 20 15:26:07.982 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 16:26:07 5240 (0x1478)
Since two weeks
I can not find a solution.
Have you ever encountered this kind of problem?
thanks
jonathanHere is what i get in the log objrepmgr.log
Successfully deleted Deployment Type ScopeId_1C06030C-B11E-4DE4-BCB4-B3D6166AF786/DeploymentType_61745739-f711-4601-815d-e62afa43b1d6/1 SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:41 5240 (0x1478)
*** delete vCI_ConfigurationItems where CI_ID=16927079 SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
*** [23000][547][Microsoft][SQL Server Native Client 11.0][SQL Server]L'instruction DELETE est en conflit avec la contrainte REFERENCE "CI_AssignmentTargetedCIs_CI_ConfigurationItems_FK2". Le conflit s'est produit dans la base de données "CM_G10", table
"dbo.CI_AssignmentTargetedCIs", column 'ActualCI_ID'. SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
Failed to delete Install Policy Type ScopeId_1C06030C-B11E-4DE4-BCB4-B3D6166AF786/RequiredApplication_a804a167-8077-4407-a5c3-eba81430cfcc/1 SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
STATMSG: ID=6004 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OBJECT_REPLICATION_MANAGER" SYS=NONETTE.GI.LCL SITE=G10 PID=5964 TID=5240 GMTDATE=mer. mars 20 11:46:42.185 2013 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9=""
NUMATTRS=0 SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
+++Begin processing changed CIA objects SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
***** Processing Application Assignment {079743EE-F252-49F6-88C5-67760F061078} ***** SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
Deleting notification file C:\Program Files\Microsoft Configuration Manager\inboxes\objmgr.box\16777339.CIA SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
CI Assignment {079743EE-F252-49F6-88C5-67760F061078} has 1 Targeted CI(s) SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
Successfully deleted policy for CI Assignment {079743EE-F252-49F6-88C5-67760F061078} SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
Successfully deleted BGB policy for CI Assignment {079743EE-F252-49F6-88C5-67760F061078}, BGB Policy ID = {079743EE-F252-49F6-88C5-67760F061078}/RunOnce SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
STATMSG: ID=5802 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_OBJECT_REPLICATION_MANAGER" SYS=NONETTE.GI.LCL SITE=G10 PID=5964 TID=5240 GMTDATE=mer. mars 20 11:46:42.816 2013 ISTR0="VLC media player 2.0.5_Tous les utilisateurs_Installer" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=414 AVAL0="{079743EE-F252-49F6-88C5-67760F061078}" SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
Successfully processed Application Assignment {079743EE-F252-49F6-88C5-67760F061078} SMS_OBJECT_REPLICATION_MANAGER 20/03/2013 12:46:42 5240 (0x1478)
thanks -
Hi All,
I am trying to do a OS build via SCCM task sequence for esprimo c720. PXE boot is working fine but after the windows screen it goes blank and restarts in which i have tried below troubleshooting steps like
1. Updating the relevant drivers on the boot image
2. Verified drivers are getting installed manually and also standalone image is working fine
3. Enabled Command support and did IPconfig (Gave Windows IP configuration) and diskpart (gave disk space) which is fine i think
But when i try to ping the SCCM primary and DP server. It throws error as
PING TRANSMIT FAILED:GENERAL FAILURE. So i concluded the network adaptor with esprimo c720 has some issues. Is there any steps i need to try further. Please help
SMSTS Log:
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="0" thread="1092" file="fwopen.cpp:146">
<![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="0" thread="1092"
file="tspxe.cpp:185">
<![LOG[Failed to download pxe variable file. Code(0x00000001)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="3" thread="1092" file="tspxe.cpp:185">
<![LOG[PxeGetPxeData failed with 0x80004005]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="3" thread="1092" file="tsmbootstraputil.cpp:1415">
<![LOG[HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1416)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context=""
type="0" thread="1092" file="tsmbootstraputil.cpp:1416">
<![LOG[TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2623)]LOG]!><time="19:25:26.222+480" date="04-14-2014"
component="TSPxe" context="" type="0" thread="1092" file="tsmediawizardcontrol.cpp:2623">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe"
context="" type="0" thread="1092" file="tsmbootstrap.cpp:1078">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1183)]LOG]!><time="19:25:26.222+480" date="04-14-2014"
component="TSPxe" context="" type="0" thread="1092" file="tsmbootstrap.cpp:1183">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="1" thread="1092" file="tsmbootstrap.cpp:1195">
<![LOG[hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,515)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="0" thread="1092"
file="environmentscope.cpp:515">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,337)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="0"
thread="1092" file="environmentlib.cpp:337">
<![LOG[this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,549)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSPxe" context="" type="0" thread="1092"
file="environmentlib.cpp:549">
<![LOG[Execution complete.]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="1" thread="872" file="bootshell.cpp:690">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="0"
thread="872" file="environmentscope.cpp:515">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="0"
thread="872" file="environmentlib.cpp:337">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="0"
thread="872" file="environmentlib.cpp:549">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, c_szSMSTSKey, 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,258)]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell"
context="" type="0" thread="872" file="utils.cpp:258">
<![LOG[RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="2" thread="872" file="utils.cpp:258">
<![LOG[GetTsRegValue() failed. 0x80070002.]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="2" thread="872" file="utils.cpp:279">
<![LOG[End program: ]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="1" thread="872" file="bootshell.cpp:722">
<![LOG[Finalizing logging from process 856]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="1" thread="872" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="19:25:26.222+480" date="04-14-2014" component="TSBootShell" context="" type="1" thread="872" file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to D:\SMSTSLog]LOG]!><time="19:25:26.591+480" date="04-14-2014" component="TSBootShell" context="" type="1" thread="872" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="19:25:26.591+480" date="04-14-2014" component="TSBootShell" context="" type="0" thread="872" file="tslogging.cpp:584">
Regards, PratapHi,
Major possible reasons for the error message PING: Transmit failed. General Failure are:
Misconfigured Firewall
Outdated Network drivers or firmware
DNS and other socket issues
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCCM 2012 SP1 errors when downloading updates
Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.
Hi All,
Good day to all you.
I would like to seek all your help on this issue that i have encountering.
My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
Error:
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
below are wsyncmgr.log:
Setting sync alert to active state on site C01 SMS_WSUS_SYNC_MANAGER (0x1690)
Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Starting Sync SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Read SUPs from SCF for MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Found active SUP MYHQKUL990707S.sdb.com from SCF File.
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
5776 (0x1690)
Synchronizing WSUS server MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
5776 (0x1690)
Using account sdb\SCCM-Admin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Synchronizing WSUS server myhqkul990707s.sdb.com ...
SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
440 (0x01B8)
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
All response is much appreciated
Thank YouHi,
I recommend you look at the IIS log. Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Software Update error - SCCM 2012 SP1
HI,
I have SCCM 2012 SP1 installed on Windows server 2008 R2 server. I have configured SUP role and tried sync from sccm console. I get the below error.
LOg:
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:11:42.047+00><thread=3840 (0xF00)>
WSUS sync running~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:12:42.255+00><thread=3840 (0xF00)>
Microsoft.SystemsManagementServer.WSUS.WSUSMSPException: WSUS sync failed with UssCommunicationError: ~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.IsSyncRunning() $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.462+00><thread=3840
(0xF00)>
Done using DEVSWAD\SWDTR-SRV-CMPATCH credentials~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
Failed to set Subscriptions on the WSUS
. Error:(-2146233088)Unknown error 0x80131500~ $$<SMS_WSUS_CONFIGURATION_MANAGER><01-30-2014 14:13:12.478+00><thread=3840 (0xF00)>
STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=3840 GMTDATE=Thu Jan 30 14:13:12.479 2014
I have configured proper proxy account which can connect to microsoft website and the port i have configured in proxy to allow is
80 and 443. I feel the port i need to allow may be i am not sure 8530 and 8531. Or 80 and 443 is fine. Please help
Regards, PratapIt says to check WCM.log which i posted above
wsync log:
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.118+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 14:02:14.119 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please
refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.122+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.123+00><thread=4388 (0x1124)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 14:02:14.132+00><thread=4388 (0x1124)>
Wakeup for a polling cycle $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:14.495+00><thread=4388 (0x1124)>
Starting Sync $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.157+00><thread=4388 (0x1124)>
Performing sync on retry schedule $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.163+00><thread=4388 (0x1124)>
Read SUPs from SCF for DCMPSTPV01.devswad.net $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.577+00><thread=4388 (0x1124)>
Found 1 SUPs $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.830+00><thread=4388 (0x1124)>
Found active SUP DCMPSTPV01.devswad.net from SCF File.~ $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.833+00><thread=4388 (0x1124)>
Sync failed: WSUS update source not found on site SCW. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.876+00><thread=4388 (0x1124)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=DCMPSTPV01.devswad.net SITE=SCW PID=2764 TID=4388 GMTDATE=Fri Jan 31 15:02:15.882 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site SCW. Please refer
to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.892+00><thread=4388 (0x1124)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.912+00><thread=4388 (0x1124)>
Setting sync alert to active state on site SCW $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:15.915+00><thread=4388 (0x1124)>
Sync time: 0d00h00m01s $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.024+00><thread=4388 (0x1124)>
Next scheduled sync is a retry sync at 31/01/2014 16:02:15 $$<SMS_WSUS_SYNC_MANAGER><01-31-2014 15:02:17.151+00><thread=4388 (0x1124)>
Regards, Pratap -
hi All,
I have faced mentioned error in Win7's ccmexec.log file doing windows pacth deployment on windows 7 by sccm 2012 Sp1
system task 'policyevaluator_unlock ' returned error code 0x8000fff
Kirpal SinghThanks for reporting this symptom. We investigated and found that this error occurs when user unlocks the workstation. Due to this error, ccmexec service doesn’t request for user required policies when user
unlocks the workstation. We will investigate and address this symptom. Other than user unlock, all other user policy scenarios will be functioning as expected. The client will process user policies when user logs on as well as in the regular user policy polling
schedule”.
BC -
Error installing SCCM 2012 SP1 client
Hi All,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on a couple of windows 2008 R2 servers.
Error 1904. Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895
The ccmsetup.log details the same message without Error 1904 indicated.
I am installing the client using the SUP method, which has worked without any problems on all 180 other windows servers I have done. ccmsetup starts and downloads all pre reqs required for the client rollout, but it then hits this error and does not
finish the installation.
Any help would be much appreciated?
Regards PowerShell90Hi,
I've seen this issue a couple of times and usually it's related to incorrect Versions of C++ Library installed on the system you try to install the Client. Try and remove any existing installations, reboot and install this version;
http://www.microsoft.com/en-us/download/details.aspx?id=26368
Let me know how it goes. -
SCCM 2012 SP1 CU1 Exchange connector error
Hi, I have configured the Exchange connector on SCCM 2012 SP1 CU1 towards an Exchange 2013. I get this error in easdisk.log:
ERROR: [MANAGED] Invoking cmdlet Get-Recipient failed. Exception: System.Management.Automation.RemoteException: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The
value "$true" could not be converted to type System.Boolean."~~ at System.Management.Automation.PowerShell.CoreInvoke[TOutput](IEnumerable input, PSDataCollection`1 output, PSInvocationSettings settings)~~ at System.Management.Automation.PowerShell.Invoke(IEnumerable
input, PSInvocationSettings settings)~~ at System.Management.Automation.PowerShell.Invoke()~~ at Microsoft.ConfigurationManager.ExchangeConnector.Connector.Invoke(PSCommand cmd)
If I launch the same command (Get-recipient), using the same account SCCM uses, directly in PSRemote on the Exchange server, it works correctly. I tried also to make the account Organization Manager, but same result.
Any hints?
thanks,
David Papini
MCSA, MCTI made a thread about unmanageable devices. I had this error too after updating my environement. In my scenario this particular error only occured after I updated to Exchange 2013 CU1. Therefore I believe this error is an Exchange related bug.
SCCM 2012 with Exchange 2013 gave me this error:
ERROR: [MANAGED] Invoking cmdlet Set-ActiveSyncMailboxPolicy failed. Exception: System.Management.Automation.RemoteException: A parameter cannot be found that matches parameter name 'IsDefaultPolicy'.
SCCM 2012 CU1 with Exchange 2013 gave me the same error:
ERROR: [MANAGED] Invoking cmdlet Set-ActiveSyncMailboxPolicy failed. Exception: System.Management.Automation.RemoteException: A parameter cannot be found that matches parameter name 'IsDefaultPolicy'.
SCCM 2012 CU1 with Exchange 2013 CU1 gave me your error:
ERROR: [MANAGED] Invoking cmdlet Get-Recipient failed.
Exception: System.Management.Automation.RemoteException: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean." -
Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:52:49 8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite' SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49 8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
UnMounting Image (Commit Changes = 0) ... SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
Completed processing image package PackageID. Status = Failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Updated history for image package PackageID in the database SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Schedule processing failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Processing completed for Schedule with ID 16777237 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04 8272 (0x2050)
Schedule processing thread stopped SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:05 8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu -
CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site
I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support -
SCCM 2012 SP1 + WSUS + Server 2012 + SQL Server 2012
Hi all;
I installed SCCM 2012 with Sp1 for my site server and everything is going well.. And than i installed the WSUS role on my Windows Server 2012 and SCCM 2012 SP1 it gave an error message which is "Fatal Error: The schema version of the database is from a newer
version of WSUS than currently installed. You must either patch your WSUS server to at least that version or drop the database." My database server is SQL Server 2012... Do you know any pathc for WSUS or SQL Server 2012 doesnt support WSUS yet???
Thank You...
MCTNormally if you are going to install SCCM 2012 SP1 +Windows 2012 with SQL 2012, Then you better use the SQL 2012 sp1.
also when you are installing the WSUS version 6.2 which come with server 2012 make sure you leave the default settings as it is. it shows in the below article.
also when you are giving the path to save the WSUS contents make sure the drive you going to create the wsus folder and the place where you going to download the updates is having free disk space and its formatted with the NTFS volume. Also the service account
you are using for this configuration should have the admin rights to the location of the wsus folder you going to create,
Thanks
Hasitha -
SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip
we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
Find below the smsts.log file
Main error in the log file is
No physical network adapters found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151. TSMBootstrap 2/12/2014 1:05:41 PM 1984 (0x07C0)
Xtract from LOG
SMSTSRebootDelay=60 Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue. Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
SMSTSRebootRequested=WinPE Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
Process completed with exit code 0 TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
!--------------------------------------------------------------------------------------------! TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Successfully completed the action (Restart to Windows PE) with the exit win32 code 0 TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Set authenticator in transport TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Clear local default environment TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Executing command line: "bcdedit.exe" TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
CreateProcess failed. Code(0x80070002) TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Command line execution failed (80070002) TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Staging boot image UNB0003A TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
ResolveSource flags: 0x00000000 TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
SMSTSPersistContent: . The content for package UNB0003A will be persisted TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
Set authenticator in transport TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
WinHttp credentials set TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
List of files to be downloaded TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim TSManager 2/12/2014 1:02:22 AM 1876
(0x0754)
VerifyContentHash: Hash algorithm is 32780 TSManager 2/12/2014 1:02:22 AM 1876 (0x0754)
Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim TSManager 2/12/2014 1:02:25 AM 1876 (0x0754)
Copying boot image locally... TSManager 2/12/2014 1:02:25 AM 1876 (0x0754)
Failed to find ADK installation root registry key TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Applying image 1 to volume E:\_SMSTaskSequence\WinPE TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Capturing WinPE bootstrap settings TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
==============================[ OSDNetSettings.exe ]=========================== OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
No adapters found with non-empty DNSDomainSuffixSearchOrder OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
Adapter "ROOT\SYMC_TEEFER2MP\0000" not found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
No physical network adapters found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
OSDNetSettings finished: 0x00000000 OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
Process completed with exit code 0 TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
Installing boot image to hard drive TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
Backing up existing boot system before trying to set up new boot system TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
BootLoader::backup: C:\, E:\_SMSTaskSequence\backup TSManager 2/12/2014 1:02:39 AM 1876 (0x0754)
BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\ TSManager 2/12/2014 1:02:43 AM 1876 (0x0754)
Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD TSManager 2/12/2014 1:02:43 AM 1876 (0x0754)
Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR TSManager 2/12/2014 1:02:45 AM 1876 (0x0754)
Process completed with exit code 0 TSManager 2/12/2014 1:02:46 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Expand a string: %_SMSTSMDataPath%\Logs TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
<![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">
1/1/1601 12:00:00 AM 1995266923 (0x76ED5B6B)
==============================[ TSBootShell.exe ]============================== TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL' TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Debug shell is enabled TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Waiting for PNP initialization... TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Booted from fixed disk TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Found config path E:\_SMSTaskSequence TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go. TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Restoring boot system from E:\_SMSTaskSequence\backup TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Successfully loaded the BCD boot system TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
Successfully loaded an exported NTLDR boot system TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
BootLoader::restore: E:\_SMSTaskSequence\backup, C:\ TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
Successfully merged logs from cache. TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Loading bootstrap settings from E:\_SMSTaskSequence\WinPE TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Loading saved WinPE settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00' TSBootShell
2/12/2014 1:04:06 AM 796 (0x031C)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Configuring WinPE bootstrap settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Creating WinPE answer file TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Setting hive location to "X:\windows\system32" TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Getting namespace "Microsoft-Windows-Setup" for architecture "x86" TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Configuring global network settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Join type: TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
DNS domain: exch1.mas.unb.com TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
DNS domain search order: TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
IP filter sec enabled: false TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
No adapters found in environment. Performing global configuration only. TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Executing command line: wpeinit.exe -winpe TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
The command completed successfully. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Starting DNS client service. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Finalizing network settings TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
No adapters found in environment. Performing global finalization only. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Finalizing global network settings TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS domain: exch1.mas.unb.com TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS domain search order: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS for WINS enabled: false TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
LMHosts file enabled: true TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Host lookup file: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
WINS scope ID: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
The command completed successfully. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL' TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL' TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Failed to open PXE registry key. Not a PXE boot. TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Resuming Task Sequence in WinPE TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00' TSMBootstrap
2/12/2014 1:05:40 AM 1984 (0x07C0)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00' TSMBootstrap
2/12/2014 1:05:40 AM 1984 (0x07C0)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat". TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Updating the local data path in the Task Sequencing Environment. TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogMaxSize to 1000000 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogMaxHistory to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogLevel to 0 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogEnabled to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogDebug to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Command line for extension .exe is "%1" %* TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
==========[ TsProgressUI started in process 2004 ]========== TsProgressUI 2/12/2014 1:05:41 AM 2008 (0x07D8)
Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
In dire need of help,
I have already gone through the below articles on the NET
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
Awating response,
Hasan RezaWell Finally I sorted my issue ,
Just want to share the solution, may be it would be helpful to some one else and save some times
The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
Thanks,
Hasan Reza.
http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen
Maybe you are looking for
-
HT1657 How can I delete a rented movie from my ipad before its expiration date?
How can I delete a watched rented movie from my Ipad before its expiration date?
-
ITunes upgrade installation cancelled - Can't uninstall or complete install
Hi All I have tried upgrading to iTunes 9.0.3 today and it took forever to install. During the installation process I stopped the install which also took a long time to stop. I CtrlAltDeleted and stopped this task. The problem is, I can no longer acc
-
Creating & posting the incoming invoice (MIRO) using BAPI
Hi, We used to give , Document Date = current date Delivery Note = EX1 Select the vendor Once we select the vendor the following data gets populated automatically such as, Item,Amount,Quantity,UOM and so on. For my data I get tax_code as V5. When
-
Does anyone have script or fast method to add transp. to que?
I have isolated a server for a GoLive Rehearsal and would like to load MANY transports into this new server, rather than load them all one by one (ie. add to que, then transport) , does anyone know of a quicker way to do the WHOLE lot at once? Thanks
-
ARD 3.2.2 - Current Status - Screen Sharing Available
Hello, like several other users i do have a problem with some of our mac client computers in ARD 3.2.2 Usually those Macs do display a Current Status in ARD like: Idle (time) or Available which we would call an expected state. Unfortunally some macs