SCCM 2012 SP1 Secondary Site installation Fails
Hi.
I have multiple secondary sites when i am trying to install new SCCM 2012 Secondary site server remotely but installation status shows a pending from last few days.
1) SEC server have privilages on System managent container
2) Primary site Server account and computer have local admin right on SEC server
hman logs says the following error message
Cannot get SQL Certificate from site xxx
CheckParentSQLServerCertificate: Failed to get SQL certificate for site XXX
1) Deleted the secondary site and reinstalled the site with different Site code but no luck
2) Able to telnet 1433 and 4022 from both primary to secondary and vice versa
3) SQL server Configuration Manager , TCP IP port was set to 1433.
please let me know if any thing i am missing
Thanks
Hi Guys
Exact same problem as described above:
Been told to install SQL Express manually first, but even after that, we continued to get the same problem.
The SQL Communication between the 2 sites doesn't seem to work.
I noticed that the Primary's SQL Security Account doesn't get created on Primary DB, in the Database replication the link has not yet been created either.
The "Exec spDrsSendSubscriptionInvalid 'Secondary 3 digit site code','Primary 3 digit site code','configuration data'" worked on 1 Secondary, but fails on all the rest.
Uninstalling/Installing the Secondary doesn't work either.
HMAN.LOG:
Update site server active directory informtion into DB SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
CheckSQLServiceRestart : SQL Service hasn't been restart since last time we check, skip it. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
Time to verify if the parent['PRI-SITECODE'] sql server certificate is still valid on site ['SEC-SITECODE'] sql server. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
Cannot get SQL Certificate from Site 'PRI-SITECODE'. SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
CheckParentSQLServerCertificate: Failed to get SQL certificate for site PM2 SMS_HIERARCHY_MANAGER 2013/07/28 09:51:12 AM 7964 (0x1F1C)
Any ideas would be appreciated.
Similar Messages
-
SCCM 2012 R2 Secondary site server will support the DMZ Zone?
We are planning for SCCM 2012 Migration, currently we have separate Primary server in DMZ.
Kindly suggest what is the best method to deploy in the DMZ (separate primary or secondary or DP) because we have only 500 Client in DMZ.Hi,
There is a blog talking about this error. You could try the method in the blog.
To summarise, when installing SCCM 2012 SP1 secondary site on a pre-configured SQL 2012 instance regardless which SQL edition is being used, “NT AUTHORITY\SYSTEM” account needs to be given
securityadmin and sysadmin rights. If SQL Express is used, there are few additional steps need to be carried out to configure the SQL TCP connection as documented in my previous blog:
http://blog.tyang.org/2012/04/09/installing-sccm-2012-rtm-secondary-site-using-a-pre-installed-sql-express-2008-r2-instance/
Installing SCCM 2012 SP1 Secondary Site with a Pre-Configured SQL 2012 Instance
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:52:49 8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite' SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49 8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
UnMounting Image (Commit Changes = 0) ... SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
Completed processing image package PackageID. Status = Failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Updated history for image package PackageID in the database SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Schedule processing failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Processing completed for Schedule with ID 16777237 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04 8272 (0x2050)
Schedule processing thread stopped SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:05 8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu -
SCCM 2012 SP1 Beta Site System Roles Installation issues
My apologies if this isn't the correct place to post this, but I didn't see any SCCM 2012 forums to post this. If there is a better place for this post, please direct me to the proper location. In the meantime this is my scenario:
I am currently evaluating SCCM 2012 for our company. I have installed SCCM 2012 SP1 Beta on a test server running Server 2012 and SQL 2012. I am testing its ability to manage Windows 8. The server is a member of our company domain. I have enabled Active
Directory Forest Discovery and CM has detected our forest and domain and set up boundaries automatically.
I am trying to add the Application Catalog Web Service and Website Roles. When I start the wizard I get exclamation marks next to Active Directory forest and domain fields in the wizard. It shows our proper forest and domain names but won't proceed
because it insists that the FQDN for my forest/domain is invalid. If I enter any other forest/domain name (e.g. yahoo.com, google.com, help-me.com) the exclamation marks clear and the wizard will proceed. SC seems to recognize our forest/domain name and
denies it. Adding different suffixes (e.g. .net, .org, .local) changes nothing. I've even flipped our forest-domain name (e.g. "a-b.com" to "b-a.com": we have a "-" in our name) and it STILL denies it. If I add a prefix to the forest/domain name, the
wizard is happy and lets me proceed (e.g. "domain.a-b.com") Did I miss something in initial setup? If this is a bug in the SP1 beta, how do I let anyone know about this? Any help/suggestions would be appreciated. Thanks.Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip
we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
Find below the smsts.log file
Main error in the log file is
No physical network adapters found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151. TSMBootstrap 2/12/2014 1:05:41 PM 1984 (0x07C0)
Xtract from LOG
SMSTSRebootDelay=60 Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue. Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
SMSTSRebootRequested=WinPE Reboot 2/12/2014 1:01:56 AM 3496 (0x0DA8)
Process completed with exit code 0 TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
!--------------------------------------------------------------------------------------------! TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Successfully completed the action (Restart to Windows PE) with the exit win32 code 0 TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Set authenticator in transport TSManager 2/12/2014 1:01:56 AM 1876 (0x0754)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSLastActionSucceeded=true TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Clear local default environment TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Executing command line: "bcdedit.exe" TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
CreateProcess failed. Code(0x80070002) TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Command line execution failed (80070002) TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
Staging boot image UNB0003A TSManager 2/12/2014 1:01:57 AM 1876 (0x0754)
ResolveSource flags: 0x00000000 TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
SMSTSPersistContent: . The content for package UNB0003A will be persisted TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
Set authenticator in transport TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
WinHttp credentials set TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
List of files to be downloaded TSManager 2/12/2014 1:01:59 AM 1876 (0x0754)
Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim TSManager 2/12/2014 1:02:22 AM 1876
(0x0754)
VerifyContentHash: Hash algorithm is 32780 TSManager 2/12/2014 1:02:22 AM 1876 (0x0754)
Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim TSManager 2/12/2014 1:02:25 AM 1876 (0x0754)
Copying boot image locally... TSManager 2/12/2014 1:02:25 AM 1876 (0x0754)
Failed to find ADK installation root registry key TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Applying image 1 to volume E:\_SMSTaskSequence\WinPE TSManager 2/12/2014 1:02:32 AM 1876 (0x0754)
Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Capturing WinPE bootstrap settings TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSManager 2/12/2014 1:02:35 AM 1876 (0x0754)
==============================[ OSDNetSettings.exe ]=========================== OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
No adapters found with non-empty DNSDomainSuffixSearchOrder OSDNetSettings 2/12/2014 1:02:36 AM 2064 (0x0810)
Adapter "ROOT\SYMC_TEEFER2MP\0000" not found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
No physical network adapters found OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
OSDNetSettings finished: 0x00000000 OSDNetSettings 2/12/2014 1:02:38 AM 2064 (0x0810)
Process completed with exit code 0 TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
Installing boot image to hard drive TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
Backing up existing boot system before trying to set up new boot system TSManager 2/12/2014 1:02:38 AM 1876 (0x0754)
BootLoader::backup: C:\, E:\_SMSTaskSequence\backup TSManager 2/12/2014 1:02:39 AM 1876 (0x0754)
BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\ TSManager 2/12/2014 1:02:43 AM 1876 (0x0754)
Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD TSManager 2/12/2014 1:02:43 AM 1876 (0x0754)
Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR TSManager 2/12/2014 1:02:45 AM 1876 (0x0754)
Process completed with exit code 0 TSManager 2/12/2014 1:02:46 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Updated security on object E:\_SMSTaskSequence. TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57 TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Save the current environment block TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
Expand a string: %_SMSTSMDataPath%\Logs TSManager 2/12/2014 1:02:47 AM 1876 (0x0754)
<![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">
1/1/1601 12:00:00 AM 1995266923 (0x76ED5B6B)
==============================[ TSBootShell.exe ]============================== TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL' TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Debug shell is enabled TSBootShell 2/12/2014 1:04:01 AM 784 (0x0310)
Waiting for PNP initialization... TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Booted from fixed disk TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Found config path E:\_SMSTaskSequence TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go. TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Restoring boot system from E:\_SMSTaskSequence\backup TSBootShell 2/12/2014 1:04:01 AM 796 (0x031C)
Successfully loaded the BCD boot system TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
Successfully loaded an exported NTLDR boot system TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
BootLoader::restore: E:\_SMSTaskSequence\backup, C:\ TSBootShell 2/12/2014 1:04:05 AM 796 (0x031C)
Successfully merged logs from cache. TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430) TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Loading bootstrap settings from E:\_SMSTaskSequence\WinPE TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Loading saved WinPE settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00' TSBootShell
2/12/2014 1:04:06 AM 796 (0x031C)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78} TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Configuring WinPE bootstrap settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Creating WinPE answer file TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Setting hive location to "X:\windows\system32" TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Getting namespace "Microsoft-Windows-Setup" for architecture "x86" TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Configuring global network settings TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Join type: TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
DNS domain: exch1.mas.unb.com TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
DNS domain search order: TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
IP filter sec enabled: false TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
No adapters found in environment. Performing global configuration only. TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
Executing command line: wpeinit.exe -winpe TSBootShell 2/12/2014 1:04:06 AM 796 (0x031C)
The command completed successfully. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Starting DNS client service. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Finalizing network settings TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
No adapters found in environment. Performing global finalization only. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Finalizing global network settings TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS domain: exch1.mas.unb.com TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS domain search order: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
DNS for WINS enabled: false TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
LMHosts file enabled: true TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Host lookup file: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
WINS scope ID: TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
The command completed successfully. TSBootShell 2/12/2014 1:05:40 AM 796 (0x031C)
==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL' TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL' TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Failed to open PXE registry key. Not a PXE boot. TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Resuming Task Sequence in WinPE TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00' TSMBootstrap
2/12/2014 1:05:40 AM 1984 (0x07C0)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00' TSMBootstrap
2/12/2014 1:05:40 AM 1984 (0x07C0)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} TSMBootstrap 2/12/2014 1:05:40 AM 1984 (0x07C0)
Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat". TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Updating the local data path in the Task Sequencing Environment. TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogMaxSize to 1000000 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogMaxHistory to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogLevel to 0 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogEnabled to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Setting LogDebug to 1 TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Command line for extension .exe is "%1" %* TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE TSMBootstrap 2/12/2014 1:05:41 AM 1984 (0x07C0)
==========[ TsProgressUI started in process 2004 ]========== TsProgressUI 2/12/2014 1:05:41 AM 2008 (0x07D8)
Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
In dire need of help,
I have already gone through the below articles on the NET
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
Awating response,
Hasan RezaWell Finally I sorted my issue ,
Just want to share the solution, may be it would be helpful to some one else and save some times
The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
Thanks,
Hasan Reza.
http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen -
SCCM 2012 R2 Secondary Site SQL Express Prerequisites
Reading Microsoft's 2012 R2 Upgrade checklist (technet.microsoft.com/en-us/library/jj822981.aspx#BKMK_UpgradeR2Checklist ) it says that Secondary Sites now require SQL Server Express 2012 CU2 for new site installs. Is this also true for Secondary
sites prior to the upgrade from SP1 to R2? Does a non R2 SCCM Seconday work with/support SQL Express 2012 CU1?
Any help would be appreciated.
Thanks
DaveAccording to the supported sql version list, a minimum of CU2 is required. See:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Upgrade from SCCM 2012 SP1 CU4 to R2 Fails - Unsupported Upgrade Path
Hi everybody,
I'm currently upgrading our SCCM infrastructure to SCCM 2012 R2 after have finished with the upgrade from SCCM 2012 RTM to SP1 CU4, thus far everything works fine, but when I try to update any
of the site servers, whether CAS or Primary, I'm getting the following error message in the Prerequisites Check:
I've gone through the system requirements and prerequisites over and over again and I can assure you that every possible update, supported OS, feature set, SQL Server, check list, etc,
etc, have been followed as per the official documentation available, however I'm stuck in this point, and surely enough I haven't been able to find out a similar case.Additionally I'm adding
the ConfigMgrPrereq log (the relevant portion of it) in case someone could kindly take a look at it.
<04-25-2014 02:06:46> ******* Start Prerequisite checking. *******
<04-25-2014 02:06:47> ********************************************
<04-25-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade,
minimum supported installed build version is [7804].
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Unsupported upgrade path; Error;
Configuration Manager has detected that one or more sites in the hierarchy are installed with a version of Configuration Manager that is not supported for upgrade.
<04-25-2014 02:07:00> INFO: This rule only apply to primary site, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Active Replica MP; Passed
<04-25-2014 02:07:00> INFO: This rule only applies to primary or secondary site in hierarchy, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Parent site replication status; Passed
<04-25-2014 02:07:00> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:00> ===== INFO: Prerequisite Type & Server: SQL:INFPROSCCMCDB.usersad.everis.int
=====
<04-25-2014 02:07:00> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;
SQL Server sysadmin rights; Passed
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int; SQL Server sysadmin rights
for reference site; Passed
<04-25-2014 02:07:00> INFO: CheckLocalSys is Admin of <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Site server computer account administrative rights; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server security mode; Passed
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: OS version:601, ServicePack:1.
<04-25-2014 02:07:09> INFO: Target computer is a Windows server.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Unsupported site server operating system version for Setup; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Domain membership; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Pending system restart; Passed
<04-25-2014 02:07:09> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: Return code:0, Major:10, Minor:50, BuildNum:4000
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server version; Passed
<04-25-2014 02:07:09> INFO: Get Sql edition:Enterprise Edition.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Edition; Passed
<04-25-2014 02:07:09> INFO: Checking Tcp is enabled to Static port, SQL Server:INFPROSCCMCDB.usersad.everis.int,
Instance:.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Tcp Port; Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is limited.
<04-25-2014 02:07:09> INFO: SQL Server memory is limited.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Configuration for SQL Server memory usage; Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<04-25-2014 02:07:09> INFO: Installing the central administration site or primary site, requires SQL
Server to reserve a minimum of 8 gigabytes (GB) of memory.
<04-25-2014 02:07:09> WARN: SQL Server minimum memory is 8000 MB.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int; SQL Server process memory allocation;
Warning; Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by
using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio. For more information about how to set a fixed amount of memory, see
http://go.microsoft.com/fwlink/p/?LinkId=233759.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Case-insensitive collation on SQL Server; Passed
<04-25-2014 02:07:09> INFO: Check Machine FQDN: <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFO: getaddrinfo returned success.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Validate FQDN of SQL Server Computer; Passed
<04-25-2014 02:07:09> INFO:CheckSupportedFQDNFormat <INFPROSCCMCDB.usersad.everis.int>
<04-25-2014 02:07:09> INFO: NetBIOS <INFPROSCCMCDB>
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Primary FQDN; Passed
<04-25-2014 02:07:09> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:09> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:09> ===== INFO: Prerequisite Type & Server: SDK:INFPROSCCMCMS.usersad.everis.int
=====
<04-25-2014 02:07:09> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:09> INFO: The rule 'Administrative rights on site system' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: The rule 'Unsupported site server operating system version for Setup' has
been run on server 'INFPROSCCMCMS.usersad.everis.int', skipped.
<04-25-2014 02:07:09> INFO: The rule 'Domain membership' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> INFO: Windows Cluster not found on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Failover Cluster; Passed
<04-25-2014 02:07:10> INFO: The rule 'Pending system restart' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:10> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Deployment Tools installed; Passed
<04-25-2014 02:07:10> INFO: CheckAdkWinPeInstalled on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int; Windows Preinstallation Environment
installed; Passed
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
SMS Provider machine has same domain as site server; Passed
<04-25-2014 02:07:10> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:10> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:10> ***************************************************
<04-25-2014 02:07:10> ******* Prerequisite checking is completed. *******
<04-25-2014 02:07:10> ******************************************<04-25-2014 02:07:10> INFO: Updating
Prerequisite checking result into the registry
<04-25-2014 02:07:10> INFO: Connecting to INFPROSCCMCMS.usersad.everis.int registry
<04-25-2014 02:07:10> INFO: Setting registry values
If you wonder whether it might be related to this error:
-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade, minimum supported installed build version is [7804].
I confirm that this one site is a secondary one that's attached to a primary site and this log is from the CAS server, I managed to tall it and delete it from that site, but still appears listed
on the CAS management console, any idea how to force the removal of a secondary site that's attached to a primary from the CAS site when it has been removed already from said primary?
I've already tried the
Preinst /DELSITE XXX command but it only works when the site to remove it's attached to the local site and certainly not from a CAS
Finally, the version, build number and everything is correct, no idea what could be the problem, does anybody know a way to bypass this or force the re-evaluation of this rules, I've got
the impression that it's being cached somehow.
Any help would be highly appreciated,
Thank you.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSEHello again everybody,
I've finally managed to fix this up, in the end I had to delete those entries manually from the database as Garry suggested. After this was done the upgrade has gone through as expected with no further ado and has finalized already, now moving on to the
primary sites.
If anybody out there is facing the same issue, what I did was to delete those "stubborn" records executing the following statements over the CAS database:
DELETE
FROMServerDataWHERESiteCode='XXX'
DELETE
FROMSC_SiteDefinitionWHERESiteCode='XXX'
And this is pretty much about it. I'd recommend to take a proper backup first though as best practice.
Thank you all anyways for your answers and comments,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE -
Issue getting WDS to Install for PXE in SCCM 2012 SP1 Primary Site
Hi All
I'm trying to get PXE boot working from our SCCM 2012 box but it never actually gets to the point of installing WDS when I check the box for PXE booting. I don't have SMSPXE.log since it never gets to that point and the distmgr.log never reaches
that point either. I've tried
uncheck pxe boot option - restart - re-check
uncheck pxe-boot - restart - install wds - leave it unconfigured - reboot - check pxe boot
uncheck pxe-boot - uninstall the vcredist 2008 packages - rebooting - install vcredist - check pxe boot option
the above with installing wds unconfigured
Below is the relevant portions of the distmgr.log file after I enable the pxe boot option no matter what manner of software is installed. We are running it on a VM in a Hyper-V 2012 enviornment in Windows 2008 SP2 x64. This issue is similar to this link
WDS PXE Secondary Site Issues but mine is on the Primary Site.
ConfigureDP SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:09 AM 4008 (0x0FA8)
DP registry settings have been successfully updated on TUSC2012.TALISKERUTAH.LOCAL SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.083 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=TUSC2012.TALISKERUTAH.LOCAL SITE=001 PID=2728 TID=4008 GMTDATE=Thu Mar 28 17:48:10.084 2013 ISTR0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\TUSC2012.TALISKERUTAH.LOCAL\"]MSWNET:["SMS_SITE=001"]\\TUSC2012.TALISKERUTAH.LOCAL\" SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
CcmInstallPXE SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Running: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Waiting for the completion of: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:10 AM 4008 (0x0FA8)
Run completed for: C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /l C:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
GetFileAttributesW failed for SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
FindWimgapiDll failed; 0x80070002 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Running: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Waiting for the completion of: msiexec.exe /quiet /i c:\program files\microsoft configuration manager\wim\wimgapi.msi /log c:\program files\microsoft configuration manager\wim\wimgapi.log SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:14 AM 4008 (0x0FA8)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4668 (0x123C)
Created policy provider trigger for ID 16777217 SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:29 AM 4656 (0x1230)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:34 AM 4668 (0x123C)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 3/28/2013 11:48:39 AM 4668 (0x123C)HI again, sorry for the late reply.
By saying that WDS don't get configured, I mean that when i enabled the PXE functionality, the WDS role got installed but the folder remote install wasn't created.
I ahve now actually gone back to an earlier snapshot from before I started play with the PXE settings of the VM and now nothing happens when activating PXE on the distribution point, but not even the smspxe.log is created.
The Account used is a local admin and the distribution point is located on the primary site server.
EDIT: in the events log, it states the following:SMS_SITE_COMPONENT_MANAGER on computer XXX.XXXX.XXX reported: SIte comoponent Manger failed to to install on this site system.
On error (source: MsiInstaller) below:
Product Application Web Service -- Internal Error 25001. 80070490
I havent mentioned it earlier, but the Server OS is Server 2012.
I hope this might help you help me :)
-
SCOM 2012 SP1 : Update rollup installation failed
Hello,
I'm trying to update SCOM 2012 SP1 with UR7 but the installation rollback automatically.
Same error with others UR.
LOG MSP :
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server - Update 'System Center 2012 - Operations Manager SP1 UR7 Update Patch' could not be installed. Error code 1603. Additional information is available in the log file c:\logs3.log.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer installed an update. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: System Center 2012 - Operations
Manager SP1 UR7 Update Patch. Installation success or error status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Note: 1: 1729
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server -- Configuration failed.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer reconfigured the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error
status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: Unable to delete the file. LastError = 32
MSI (c) (08:1C) [14:49:24:772]: Grabbed execution mutex.
MSI (c) (08:1C) [14:49:24:772]: Cleaning up uninstalled install packages, if any exist
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: MainEngineThread is returning 1603
=== Verbose logging stopped: 15/10/2014 14:49:24 ===
MOMPerfCtrsInstall.log
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The uninstall has completed.
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.InstallLog.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The uninstall has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Maybe someone have a idea about that ?
Thank you !
JérémyHi,
Have your tried to review the c:\logs3.log for any potential error or indication of cause?
For more information, please review the link below:
Update Rollup 7 for System Center 2012 Operations Manager Service Pack 1
http://support.microsoft.com/kb/2965420
Update rollup packages for System Center 2012 Operations Manager
http://support.microsoft.com/kb/2906925
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCCM 2012 R2 - Secondary site in other forest
Hello,
I've a question about secondary site deployment. Currently, we've a standard sccm infrastructure with only one primary site.
We want to integrate a distant site with low bandwith and in a other forest. This forest is administrate by someone on site. That people must have SCCM administration rights only for his forest.
Secondary Site is it the best method to isolate sccm rights administration ? (Maybe easier with only one Distribution Point ?)
Secondary Site must be in the new forest or must be in the primary site forest ?
Thank you !
JérémyA secondary site in another forest requires a trust.
"Secondary Site is it the best method to isolate sccm rights administration ?" --> not at all! Secondaries do not add an administrative boundary. Even primaries don't. Use RBA (role based access) instead. How many clients are in each forest? Define
"low bandwidth".
Torsten Meringer | http://www.mssccmfaq.de -
SCCM 2012 R2 Secondary Site client assignment
I have been doing some research and discovered that you shouldn't directly assign a boundary group to a secondary site. This confuses me a little bit and I was hoping someone can clear it up a bit.
Currently my client has a primary site (PS1) and a secondary site (SS1) in their environment. The reason for the secondary site is because there is a site with around 700 clients and that exceeded the comfort level of a distribution point. This site is located
in Valley Forge and we want all clients in this boundary group to use the secondary site. Everywhere else should use primary.
With that being said and after reading what I read, should I not directly assign the boundary group for Valley Forge to the secondary site? If not, how does the client know to use it? And better yet, what is the point of having the option to directly assign
to SS1 if it shouldn't be done?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”Jorgen, thank you for the link. This was the original post I read that rocked my world:) I just wanted to get more info on the subject and make sure it was still relevant.
MadLuka, much appreciate the explanation. Just when you think you know something somebody comes along and proves you wrong. Is there anything that I need to do for the VF clients to establish the understanding that they will need to use the SS like
assign it as a site system for content management? Even better should I include all site systems (PS and SS) within that content management so that they will use the PS when they roam outside of that boundary?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
SCCM 2012 SP1 - Secondary SUP Sync Source Server Changed without intervention
Hi,
Recently I noticed that some of ours Secondary SUP's have stopped syncing. Looking at the logs I found that they cannot found SUP parent. Name resolution was OK, no firewall blocking traffic flow, SUP at Primary Site working normally, all replica SUP services
online.
Then I went to the Sync Settings at Site Components of the SUP replica and the value of the option "Synchronize from a upstream data source location (URL)" had been changed!
The URL of the upstream server has the correct server name, but the 8530 port is missing! The interesting fact is that I have other SUP replicas working normally with the correct upstream server name and port.
So, my question is: Since I've installed all the replicas SUP's with the same upstream SUP settings, they have been working normally until last week, how the settings are now wrong? The property is greyed out and I cannot change it back to the
correct parameter.
Is there any way to correct it without having to reinstall all the replicas SUPs?
Thanks!!Hi Joice,
Thanks for your response! Well, I followed your suggestion but it didn't work. After I removed the parent SUP, the Sync Settings of the SUP replicas were still greyed out.
I forgot to mention in my post that this problem appeared after I moved the SCCM database to another SQL server. I followed the right procedure and everything worked fine but the SUP. After I run the Perform site maintenance or reset this site I noticed
that SCCM removed the port 8530 from the parent SUP. All the replicas stopped syncing. Then I changed back the port through SCCM console - Site Components - and all worked fine. But 2 days later, the majority of my SUP replicas have the port 8530 removed from
Sync Settings and they cannot sync anymore, and here I am.
There's a cmdlet (Set-CMSoftwareUpdatePointComponent) I thought I could use, but it only works with R2.
So, I just reinstalled the Parent SUP, hoping that it could reconfigure replicas SUPs, but I think it's a long shot. -
SCCM 2012 SP1 OSD Multicast is failing 0x80004005
I am trying to get multicast to work on a DP. But when I kick off an OSD and get to one of the items that I have enabled multicasting (lets say the OS image) then I get the following in the smsts.log:
Failed to get MCS key (Code 0x80004005)
ClientRequestToMCS::DoRequest failed. error = (0x80004005)
Request to MCS 'MYSCCMSERVER.SCCM.LOCAL' failed with error (Code 0x80004005)
Multicast OpenSessionRequest failed (0x80004005)
Sending status message: SMS_OSDeployment_PackageDownloadMulticastStatusFail
And then it reverts to a normal HTTP download. Why is this failing?there's a thread here about issues with MCS key though this is 2007 maybe it will point you in a right direction
http://social.technet.microsoft.com/Forums/systemcenter/en-US/07c735c8-9ce9-43b9-8cf3-e7b897568ef3/sccm-multicast-mcs-signedserializedkey-is-empty
The issues I had with multicast came up when the target device was not on the same subnet and network hardware was blocking communication. -
Procedure performing a "Retry Secondary Site" Operation in SCCM 2012 R2 Secondary Server
Dear Brother,
My SCCM 2012 R2 Secondary Site Server, unfortunately crashed and required to be restored, doing this I end up performing a "Retry Secondary Site Operation.
One by one I am clearing out the errors but there are few remaining errors on the prerequisite checks:
1.[Failed]:The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE. You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
Actions Done: SQL Related Services use Logon As Domain Account "Microsoft-Domain\BillAdmin" , but still the above message still appears in the logs.
Actions Done: None
2.[Failed]:The collation of the site database does not match the collation of the parent site's database. All sites in a hierarchy must use the same database collation.
3.[Failed]:The site server might be unable to publish to Active Directory. The computer account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have
manually verified these permissions. For more information about your options to configure required permissions, see
http://go.microsoft.com/fwlink/p/?LinkId=233190.
Actions Done: None, as this machine is previously a working Secondary site for 1 Year already. So I do not suspect anything from the current related configuration.
4.[Failed]: Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
Setup cannot continue.
Action Taken: Domain Account "Microsoft-Domain\BillAdmin" has a
Sysadmin roles and actually all the check boxes are chosen to acquire all SQL account roles"
5. [Failed]:Prerequisite checks complete with failure - check ConfigMgrPrereq.log
in the root of the primary site server system drive.
6[Failed]:Unable to complete secondary site server installation - check ConfigMgrSetup.log in the root of the secondary site server system drive.
ConfigMgrPrereq.log-Start
?<12-27-2014 23:39:35> ********************************************
?<12-27-2014 23:39:35> ******* Start Prerequisite checking. *******
?<12-27-2014 23:39:35> ********************************************
?<12-27-2014 23:39:35> Commandline :
"E:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe"
?<12-27-2014 23:39:35> Check Type: Secondary site
Site Server: SecondarySite2.microsoft.com,
SQL Server: SecondarySite2.microsoft.com,
SQL Named Instance: MSSQLSERVER,
Install Folder: E:\Program Files\Microsoft Configuration Manager\,
Setup Source Folder: E:\Source\SCCM2012-R2
?<12-27-2014 23:39:35> INFO: Executing prerequisite functions...
?<12-27-2014 23:39:35> ===== INFO: Prerequisite Type & Server: SITE_SEC:SecondarySite2.microsoft.com =====
?<12-27-2014 23:39:35> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:39:35> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:39:35> INFO: CheckLocalSys is Admin of <SecondarySite2.microsoft.com>.
?<12-27-2014 23:39:43> SecondarySite2.microsoft.com; Site server computer account administrative rights; Passed
?<12-27-2014 23:39:43> <<<RuleCategory: System Requirements>>>
?<12-27-2014 23:39:43> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
?<12-27-2014 23:39:43> INFO: Check Lanman service: <SecondarySite2.microsoft.com>.
?<12-27-2014 23:39:44> SecondarySite2.microsoft.com; Check Server Service is running; Passed
?<12-27-2014 23:39:45> INFO: OS version:601, ServicePack:1.
?<12-27-2014 23:39:46> INFO: Target computer is a Windows server.
?<12-27-2014 23:39:46> SecondarySite2.microsoft.com; Unsupported site server operating system version for Setup; Passed
?<12-27-2014 23:39:46> SecondarySite2.microsoft.com; Domain membership; Passed
?<12-27-2014 23:39:47> INFO: Free disk space on target
\\SecondarySite2.microsoft.com\E$\. = 83157 MB
?<12-27-2014 23:39:47> SecondarySite2.microsoft.com; Free disk space on site server; Passed
?<12-27-2014 23:39:47> SecondarySite2.microsoft.com; Pending system restart; Passed
?<12-27-2014 23:39:48> INFO: The server SecondarySite2.microsoft.com is not read-only domain controller.
?<12-27-2014 23:39:48> SecondarySite2.microsoft.com; Read-Only Domain Controller; Passed
?<12-27-2014 23:39:48> INFO: Check FQDN Length for site server: <SecondarySite2.microsoft.com>.
?<12-27-2014 23:39:48> SecondarySite2.microsoft.com; Site Server FQDN Length; Passed
?<12-27-2014 23:39:48> <<<RuleCategory: Dependent Components>>>
?<12-27-2014 23:39:48> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
?<12-27-2014 23:39:48> SecondarySite2.microsoft.com; Microsoft XML Core Services 6.0 (MSXML60); Passed
?<12-27-2014 23:39:49> SecondarySite2.microsoft.com; Microsoft Remote Differential Compression (RDC) library registered; Passed
?<12-27-2014 23:39:49> INFO: Checking Windows Installer version on SecondarySite2.microsoft.com.
?<12-27-2014 23:39:50> INFO: Path of Windows Installer is <\\SecondarySite2.microsoft.com\C$\Windows\system32\msi.dll>.
?<12-27-2014 23:39:51> INFO: Msi.dll version is: <5.0.7601.17807> .
?<12-27-2014 23:39:51> SecondarySite2.microsoft.com; Microsoft Windows Installer; Passed
?<12-27-2014 23:39:51> INFO: Start Checking InstallSQLExpress on site server: SecondarySite2.microsoft.com, SQL Server instance MSSQLSERVER
?<12-27-2014 23:39:51> INFO: SQL Server Express installation was not selected.
?<12-27-2014 23:39:51> SecondarySite2.microsoft.com; SQL Server Express on Secondary Site; Passed
?<12-27-2014 23:39:52> SecondarySite2.microsoft.com; Existing Configuration Manager server components on site server; Passed
?<12-27-2014 23:39:52> SecondarySite2.microsoft.com; Firewall exception for SQL Server (stand-alone primary site); Passed
?<12-27-2014 23:39:52> INFO: SQL Server computer <SecondarySite2.microsoft.com>
?<12-27-2014 23:39:52> INFO: SQL Server named instance <MSSQLSERVER>
?<12-27-2014 23:39:53> SecondarySite2.microsoft.com; SQL Server service running account; Error; The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service
name> or LOCAL SERVICE. You must configure the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
?<12-27-2014 23:39:53> INFO: SQL Server computer <SecondarySite2.microsoft.com>
?<12-27-2014 23:39:53> INFO: SQL Server named instance <MSSQLSERVER>
?<12-27-2014 23:39:53> INFO: Cannot connect to registry key.
?<12-27-2014 23:39:53> SecondarySite2.microsoft.com; Dedicated SQL Server instance; Passed
?<12-27-2014 23:39:53> INFO: CheckSQLCollationSecondary
?<12-27-2014 23:39:53> INFO: Collation on <PrimarySite2DB.microsoft.com> <SQL_Latin1_General_CP1_CI_AS>
?<12-27-2014 23:41:27> ERROR: failed to get collation from secondary site
?<12-27-2014 23:41:27> SecondarySite2.microsoft.com; Parent/child database collation; Error; The collation of the site database does not match the collation of the parent site's database. All
sites in a hierarchy must use the same database collation.
?<12-27-2014 23:41:27> INFO: Checking .NET framework versions 3.5...
?<12-27-2014 23:41:28> INFO: .NET is installed
?<12-27-2014 23:41:28> SecondarySite2.microsoft.com; Minimum .NET Framework version for Configuration Manager site server; Passed
?<12-27-2014 23:41:28> INFO: Skipping check for .NET version, user did not select to install SQL Server Express for Secondary Site.
?<12-27-2014 23:41:28> SecondarySite2.microsoft.com; Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site; Passed
?<12-27-2014 23:41:28> INFO: CheckInstallSourceVersion <E:\Source\SCCM2012-R2>
?<12-27-2014 23:41:29> SecondarySite2.microsoft.com; Setup Source Version; Passed
?<12-27-2014 23:41:29> INFO:CheckInstallSourcePath <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:14> SecondarySite2.microsoft.com; Setup Source Folder; Passed
?<12-27-2014 23:42:14> INFO: Enter CheckSecSiteSqlOnSameMachine.
?<12-27-2014 23:42:14> INFO: Target secondary site Machine <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:14> INFO: SQL Server computer <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:14> SecondarySite2.microsoft.com; SQL Server on the Secondary Site Computer; Passed
?<12-27-2014 23:42:14> INFO:CheckSupportedFQDNFormat <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:15> INFO: NetBIOS <SECONDARYSITE2>
?<12-27-2014 23:42:15> SecondarySite2.microsoft.com; Primary FQDN; Passed
?<12-27-2014 23:42:15> INFO:CheckMachineAccountHasADAccess <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:40> ERROR: Site server does not have create child permission on AD 'System Management'
?<12-27-2014 23:42:40> WARN: Site server does not have delete child permission on AD 'System Management'
?<12-27-2014 23:42:40> SecondarySite2.microsoft.com; Verify site server permissions to publish to Active Directory.; Warning; The site server might be unable to publish to Active Directory. The computer
account for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure
required permissions, see
http://go.microsoft.com/fwlink/p/?LinkId=233190.
?<12-27-2014 23:42:40> INFO:CheckRemoteWMIConnection <SecondarySite2.microsoft.com>
?<12-27-2014 23:42:48> SecondarySite2.microsoft.com; Remote Connection to WMI on Secondary Site; Passed
?<12-27-2014 23:42:48> INFO: Check required collation of Sql Server.
?<12-27-2014 23:42:48> INFO: LangID <409>
?<12-27-2014 23:42:48> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
?<12-27-2014 23:42:48> SecondarySite2.microsoft.com; Required SQL Server Collation; Passed
?<12-27-2014 23:42:48> ===== INFO: Prerequisite Type & Server: SQL:SecondarySite2.microsoft.com =====
?<12-27-2014 23:42:48> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:42:48> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:42:48> INFO:RemoteCheckAdminOnSQL <SecondarySite2.microsoft.com>, SQL Server <SecondarySite2.microsoft.com>
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com; SQL Server sysadmin rights; Error; Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions
on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup cannot continue.
?<12-27-2014 23:44:33> ===== INFO: Prerequisite Type & Server: MP:SecondarySite2.microsoft.com =====
?<12-27-2014 23:44:33> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:44:33> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com; Administrative share (Site system); Passed
?<12-27-2014 23:44:33> INFO:CheckSiteSystemtoSQLConnectivity <SecondarySite2.microsoft.com>
?<12-27-2014 23:44:33> INFO: Installing secondary site, skipping SQL Server connectivity check.
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com; Site System to SQL Server Communication; Passed
?<12-27-2014 23:44:33> <<<RuleCategory: System Requirements>>>
?<12-27-2014 23:44:33> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
?<12-27-2014 23:44:33> INFO: The rule 'Check Server Service is running' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:34> INFO: OS version:601, ServicePack:1.
?<12-27-2014 23:44:35> INFO: Target computer is a Windows server.
?<12-27-2014 23:44:35> SecondarySite2.microsoft.com; Unsupported management point operating system version for Setup; Passed
?<12-27-2014 23:44:35> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:36> INFO: Windows Cluster not found on SecondarySite2.microsoft.com.
?<12-27-2014 23:44:36> SecondarySite2.microsoft.com; Windows Failover Cluster; Passed
?<12-27-2014 23:44:36> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:36> <<<RuleCategory: Dependent Components>>>
?<12-27-2014 23:44:36> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
?<12-27-2014 23:44:36> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:44:36> SecondarySite2.microsoft.com; IIS service running; Passed
?<12-27-2014 23:45:35> INFO: CheckWebSvcExtnRemote, result:<7>.
?<12-27-2014 23:45:35> SecondarySite2.microsoft.com; BITS installed; Passed
?<12-27-2014 23:47:00> INFO: CheckWebSvcExtnRemote, result:<7>.
?<12-27-2014 23:47:01> WARN: BITS Service is not running on SecondarySite2.microsoft.com.
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com; BITS enabled; Passed
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com; IIS HTTPS Configuration for management point; Passed
?<12-27-2014 23:47:01> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com; Firewall exception for SQL Server for management point; Passed
?<12-27-2014 23:47:01> SecondarySite2.microsoft.com; Administrative rights on management point; Passed
?<12-27-2014 23:47:01> INFO:CheckV4ClientNotInstalled <SecondarySite2.microsoft.com>
?<12-27-2014 23:47:45> SecondarySite2.microsoft.com; Client Version on Management Point Computer; Passed
?<12-27-2014 23:47:45> ===== INFO: Prerequisite Type & Server: DP:SecondarySite2.microsoft.com =====
?<12-27-2014 23:47:45> <<<RuleCategory: Access Permissions>>>
?<12-27-2014 23:47:45> <<<CategoryDesc: Checking access permissions...>>>
?<12-27-2014 23:47:45> <<<RuleCategory: System Requirements>>>
?<12-27-2014 23:47:45> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com; Unsupported distribution point operating system version for Setup; Passed
?<12-27-2014 23:47:47> INFO: The rule 'Domain membership' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> INFO: The rule 'Windows Failover Cluster' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> INFO: The rule 'Pending system restart' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> <<<RuleCategory: Dependent Components>>>
?<12-27-2014 23:47:47> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com; Microsoft XML Core Services 6.0 (MSXML60) for distribution point; Passed
?<12-27-2014 23:47:47> INFO: The rule 'IIS service running' has been run on server 'SecondarySite2.microsoft.com', skipped.
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com; IIS HTTPS Configuration for distribution point; Passed
?<12-27-2014 23:47:47> SecondarySite2.microsoft.com; Administrative rights on distribution point; Passed
?<12-27-2014 23:47:48> ***************************************************
?<12-27-2014 23:47:48> ******* Prerequisite checking is completed. *******
?<12-27-2014 23:47:48> ***************************************************
?<12-27-2014 23:47:48> INFO: Updating Prerequisite checking result into the registry
?<12-27-2014 23:47:48> INFO: Connecting to SecondarySite2.microsoft.com registry
?<12-27-2014 23:47:50> INFO: Setting registry values
ConfigMgrPrereq.log-End
Well my question is what would be the best solutions as it bugs me for days now.
Regards,Hello,
?<12-27-2014 23:44:33> SecondarySite2.microsoft.com;
SQL Server sysadmin rights; Error;
Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions.
Setup cannot continue.
Did you install SQL server with a local account?
?<12-27-2014 23:41:27> SecondarySite2.microsoft.com;
Parent/child database collation; Error;
The collation of the site database does not match the collation of the parent site's database.
All sites in a hierarchy must use the same database collation.
Try this blog:
http://jthys.wordpress.com/2012/04/02/sccm-2012-required-sql-server-collation/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
SCCM Primary Site installation fails
Hello!
In my organization we have two domain/forests. DomainA.local and DomainB.local
in one forest (DomainA.local) we have sccm 2012 sp1 CAS site. with dedicated database server on sql 2012 sp1 cu5
in other forest (DomainB.local) we want to setup primary site on sccm 2012 sp1 with dedicated database server on sql 2012 sp1 cu5
forests have trust both sided.
all installation accounts have administrative rights on all SC servers. in both domains.
when i try to install SCCM 2012 primary site in the hierarchy,
i receiving the errors:
INFO: Created SQL Server machine certificate for Server [S-SCDB-02.DomainB.local] successfully.
ERROR: Failed to open certificate store (HRESULT=0x35) Configuration Manager Setup 9/3/2013 11:56:19 AM 3268 (0x0CC4)
ERROR: Failed to write S-SCDB-02.DomainB.local SQL Server certificate to store (TrustedPeople) on site server (S-SCDB-01.DomainA.local).
ERROR: Failed to write certificate of primary site's SQL Server [S-SCDB-02.DomainB.local] to CAS SQL Server [S-SCDB-01.DomainA.local].
Install user from domainB.local has administrative rights on S-SCDB-01.DomainA.local and sysadmin rights in sql server.
Also, it has full administrator role on CAS.Of course, it has administrative rights on primary site server and sql server S-SCDB-02.DomainB.local and sysadmin rights.
WHY????>Taking a step back: why? Are you using a CAS and multiple primary sites at all? Do you have 100,000+ clients to manage?
we need CAS due to our network infrastructure.
thank you for you help.
we solved problem today.
it was need to open "windows" ports on the firewall between SCCM Primary Site server and CAS SQL server to give SCCM
primary site installation process the ability to install the primary site's sql-server's self-signed certificate to CAS sql-server trusted people local store.
i did not remember this point in deploying documentation((((
Maybe you are looking for
-
Reader 9.3 locks up when using icons to move within doc & print
I've run into an issue with Adobe Reader 9.3.2 under XP SP3 all updated... When I try and read a PDF and move through the documents using the various icons at the top menu - such as the arrows or printing icon - it hangs up. If I use the slider bar
-
Problem in badi CRM_CUSTOMER_H_BADI
Hi, I've the below problem when I am trying to get the et_orderadm_i calling the FM CRM_ORDER_READ. My FM CALL FUNCTION 'CRM_ORDER_READ' EXPORTING it_header_guid = lt_h_guid IMPORTING et_orderadm_i
-
I have imported footage shot in 16x9 format and have tried to export it from FCE but have only been successful one time. I read the other posts and the link to http://www.fcpbook.com/Video8.html and http://www.fcpbook.com/Video9.html but I cannot dup
-
Quetion about support of attributes in planning
Hi All, I have one doubt in Oracle essbase study guides I found that Only 'Text atrributes are supported in planning databases' but in planning work space I am able to create text,numeric,boolean and date types of attribute and able to use manage dat
-
IPhone not synching all selected albums
With the iPhone connected to the computer and the music tab selected on the iTunes/iPhone page, "Sync music" is checked and the radio button for "Selected playlists" is selected. In the window containing my playlists, several playlists are checked. I