[SCCM 2012 SP1 W2K8R2] SUP not in Sync with WSUS settings (Language)

Hi All,
I have almost identical production and test SCCM environment.
After I setup SUP on both production and test environment SUP Language settings are not replicated to WSUS and cause WSUS/SCCM to Sync all languages.
SCCM 2012:
WSUS:
Any idea how to fix this?
Thank you in advance.
Regards,

Hi,
There is nothing to fix, it looks exactly the same in my environment. The updates are not downloaded using WSUS it is downloaded using either the SCCM console or the SCCM Primary Site server if you use and ADR and when you download the updates the settings
are beeing honoured.
So this is expected behaviour.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

  • SUP not in sync with WSUS

    we recently sttod-up our sccm 2012 environment.  We are still in configuration phase per se.
    our CAS server also has the SUP role.  We installed WSUS on the server prior to setting up the SUP role.
    Nothing is showing up in the Software Library. We have not seen anything that stands out in log.
    We have not found any article that addresses how to troubleshoot issue.
    the servers are all 2008 R2 with SP.  the storage for the WSUS files is considered local and WSUS was setup using Windows Internal Database.
    Any directions?
    Michael Pace Client Services Team Allegis Group, Inc.

    Thanks Jorgen;
    WSUSCtrl.log does nor show any arrors.  however the SMS_WSUS_CONFIGURATION_MANAGER and SMS_WSUS_CONTROL_MANAGER indicate many errors.
    extract of logs as follows.
    SMS_WSUS_CONFIGURATION_MANAGER :
    Error Milestone CAS 10/11/2012 8:31:51 AM SCCM2012CAS.allegisgroup.com SMS_WSUS_CONFIGURATION_MANAGER 6600 WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "SCCM2012CAS.allegisgroup.com".   
    Possible cause: WSUS Server version 3.0 SP2 or above is not installed or cannot be contacted.  Solution: Verify that the WSUS Server version 3.0 SP2 or greater is installed. Verify that the IIS ports configured in the site are same as those configured
    on the WSUS IIS website.
    SMS_WSUS_CONTROL_MANAGER :
    Error Milestone CAS 10/11/2012 8:26:04 AM SCCM2012CAS.allegisgroup.com SMS_WSUS_SYNC_MANAGER 6703  WSUS Synchronization failed.   Message: WSUS server not configured. Please refer to WCM.log for configuration
    error details..   Source: CWSyncMgr::DoSync.    The operating system reported error 2147500037: Unspecified error
    WCM.log:
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:27:48 AM 6232 (0x1858)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:27:48 AM 6232 (0x1858)
    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.7600.226) SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:27:48 AM 6232 (0x1858)
    Successfully connected to server: SCCM2012CAS.allegisgroup.com, port: 80, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:27:48 AM 6232 (0x1858)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:27:48 AM 6232 (0x1858)
    WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:27:48 AM 6232 (0x1858)
    Successfully connected to server: SCCM2012CAS.allegisgroup.com, port: 80, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:27:48 AM 6232 (0x1858)
    Successfully got update categories from WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:12 AM 6232 (0x1858)
    Successfully connected to server: SCCM2012CAS.allegisgroup.com, port: 80, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:12 AM 6232 (0x1858)
    Successfully got update classifications from WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:13 AM 6232 (0x1858)
    Successfully connected to server: SCCM2012CAS.allegisgroup.com, port: 80, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:13 AM 6232 (0x1858)
    Successfully got update languages from WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:14 AM 6232 (0x1858)
    Successfully connected to server: SCCM2012CAS.allegisgroup.com, port: 80, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:19 AM 6232 (0x1858)
    Not yet ready to set WSUS Server subscription as returned by WSUS Server. Will try again. SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:19 AM 6232 (0x1858)
    This error is transient and will be retried in 1 minutes. SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:19 AM 6232 (0x1858)
    Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:28:19 AM 6232 (0x1858)
    Wait timed out after 1 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:29:19 AM 6232 (0x1858)
    Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 10/10/2012 10:29:24 AM 6232 (0x1858).
    thanks again
    Michael Pace Client Services Team Allegis Group, Inc.

  • SCCM 2012 SP1 - Secondary SUP Sync Source Server Changed without intervention

    Hi,
    Recently I noticed that some of ours Secondary SUP's have stopped syncing. Looking at the logs I found that they cannot found SUP parent. Name resolution was OK, no firewall blocking traffic flow, SUP at Primary Site working normally, all replica SUP services
    online.
    Then I went to the Sync Settings at Site Components of the SUP replica and the value of the option "Synchronize from a upstream data source location (URL)" had been changed!
    The URL of the upstream server has the correct server name, but the 8530 port is missing! The interesting fact is that I have other SUP replicas working normally with the correct upstream server name and port.
    So, my question is: Since I've installed all the replicas SUP's with the same upstream SUP settings, they have been working normally until last week, how the settings are now wrong? The property is greyed out and I cannot change it back to the
    correct parameter.
    Is there any way to correct it without having to reinstall all the replicas SUPs?
    Thanks!! 

    Hi Joice,
    Thanks for your response! Well, I followed your suggestion but it didn't work. After I removed the parent SUP, the Sync Settings of the SUP replicas were still greyed out.
    I forgot to mention in my post that this problem appeared after I moved the SCCM database to another SQL server. I followed the right procedure and everything worked fine but the SUP. After I run the Perform site maintenance or reset this site I noticed
    that SCCM removed the port 8530 from the parent SUP. All the replicas stopped syncing. Then I changed back the port through SCCM console - Site Components - and all worked fine. But 2 days later, the majority of my SUP replicas have the port 8530 removed from
    Sync Settings and they cannot sync anymore, and here I am.
    There's a cmdlet (Set-CMSoftwareUpdatePointComponent) I thought I could use, but it only works with R2.
    So, I just reinstalled the Parent SUP, hoping that it could reconfigure replicas SUPs, but I think it's a long shot.

  • SCCM 2012 SP1 - Multiple SUP - common WSUS DB

    Hello,
    Is it supported / recommend to share a common WSUS DB for multiple WSUS / SUP roles ?
    If yes, how to perform a clean deployment of additional SUP dealing with additional KB requirements.Following article explains the problem but the solution looks very complex: http://scug.be/sccm/2012/10/03/configmgr-2012-sp1-installing-multiple-software-update-points-per-single-primary-site-and-use-a-single-shared-wsus-database-on-your-sql-cluster/
    I tried to test this procedure in my test environment but it broken WSUS and now refuse to sync with Microsoft (can't establish SSL connection).
    I have not been able to find any official Microsoft setup guide for this ?
    As an alternative, is it possible to sync additional SUP as downstream servers with the first one. I ask for this because I use SCUP, and I don't want to maintain multiple WSUS environment.
    Regards.

    Hi.
    We have the same problem with our WSUS 3.0 SP2 installation, when I install WSUS on an SCCM 2012 server in the "Secondary Site".
    That server is in a different domain (one way Trust); but I have Logged On to that server with an specific account from the Top Domain that has Owner rights on the excisting DB). The Installation connect's succcesfully to the DB, and on the
    Next Window I get the error "The existing DB is not compatible with this version of Windows Server Update Services 3.0 SP2"
    The first two Wsus Installations  in the "Top" domain worked just fine.
    Anyone an idea?

  • SCCM 2012 SP1 drivers are not installed

    Hi
    I've the problem that drivers are not installed by PXE staging. I'm 100% sure I've the correct drivers. I've installed them over a pendrive without any problem but, SCCM doesn't install any driver, also I receive no error message. I see that the drivers
    are downloaded during the staging process but after the driver installation step nothing is installed. I have this problem on all hardware types and devices. It's ever the same. The task sequenze is also correct. We checked that again and again.
    First I loaded the whole driver package (including all drivers for this hardware tag) => dosen't work.
    Have deleted all drivers and assigend just the exact network driver to the categorie ==> dosen't work.
    Had also an SCCM specialist in the house which analyzed this issue but, he also cannot explain what could be the reason. He has never seen such a problem and he has installed a lot of SCCM2012 environments.
    Has anyone an idea or maybe similar problems?
    Thank you!
    Sacha

    Hello Andre,
    I got now an answer from Microsoft. It really seems like the setup installation is no longer supported for Windows 7 like Thomas said.
    The better formulation in the WhatsNew in SP1 (http://technet.microsoft.com/en-us/library/jj591552.aspx#BKMK_WhatsNewSP1_Software) would be:
    The build and capture task sequence was updated to apply an operating system image instead of running Setup.exe for installation. You can only
    still run Setup.exe for Windows 8 deployments by editing the task sequence in the task sequence editor.
    First I thought this would be a joke but seems so. I was able to very that it will work if you use an image. With the image all drivers were installed and the task sequence ended without any error.
    I loaded the install.wim from the original CD as image install and used the OSDPreserveDriveLetter setting like Thomas said.
    I asked Microsoft for an official statement if this install type would be supported by Microsoft or what the recommended way is to create the golden image by using SCCM. At the moment I’m waiting for the final answer. I don’t want to use
    unsupported installation methods for my customers.
    I will post the answer from Microsoft after I got it.
    We all could be happy that we now have Windows 8 and all Company want to install Windows 8 at all systems otherwise we have to wait until we get a supported way. ;.)
    regards
    Christoph

  • SCCM 2012 SP1 Distribution points not updating

    The package that holds my MS updates is not updating on my distribution points ever since I upgraded to SP1. If I remove the package from the distribution points and then add it back it will work fine. This is happening to me every I add updates to this
    package. Below is part of the smsdpprov.log file from one of my distro points.
    [C90][Thu 02/14/2013 11:03:51]:Content 'f16906f8-d1d4-44df-8cf7-35dd7428893a' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:03:55]:Content '1ebc4751-063f-46dd-a7ae-096cce3545dc' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:03:56]:Content 'b2903470-59e0-4d89-a1a5-808b58c9fd4e' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:03:58]:Content 'f058ee07-a66e-4bdf-8a53-7cc30affe333' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:04:00]:Content '03546ec3-2613-46ce-bf0c-a6064149f2c6' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:04:03]:Content '7492e432-b69c-478c-8c7b-7c2396302eb4' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:04:05]:Content '995a1a82-6d7c-4fb6-9e1b-8cfac070b787' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:04:06]:Content 'a0a2a75d-beab-49ca-96e5-e03afa98dc8f' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:04:08]:Content '21061204-1d54-4262-bc90-cf5922191940' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:04:11]:Content 'ce9e07ad-1467-4da5-bf03-8c7013743d34' for package 'ENS00006' has been added to content library successfully
    [C90][Thu 02/14/2013 11:04:14]:MoveFile failed for \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f.ENS00006.temp to \\?\C:\SCCMContentLib\DataLib\6178f7ae-a640-4e04-a851-abd13239a50f
    [C90][Thu 02/14/2013 11:04:14]:FileRename failed; 0x80070005
    [C90][Thu 02/14/2013 11:04:14]:CContentDefinition::Finalize failed; 0x80070005
    [C90][Thu 02/14/2013 11:04:14]:Failed to finalize content '6178f7ae-a640-4e04-a851-abd13239a50f' for package 'ENS00006'. Error code: 0X80070005

    I've got the same issue.  When I look at the smsdpprov.log on the distribution point, this is what I see.
    [EB0][Thu 10/31/2013 08:39:08]:Content '0a3fe62c-58ce-47c7-b635-e23407515ecb' for package 'ONB0007A' has been added to content library successfully
    [EB0][Thu 10/31/2013 08:39:08]:Content '809b4727-78b3-48bd-85ca-f2fdcf668297' for package 'ONB0007A' has been added to content library successfully
    [EB0][Thu 10/31/2013 08:39:08]:MoveFile failed for
    \\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93.ONB0007A.temp to
    \\?\E:\SCCMContentLib\DataLib\5263454e-e3de-49e5-a077-48dba0eefe93
    [EB0][Thu 10/31/2013 08:39:08]:FileRename failed; 0x800700b7
    [EB0][Thu 10/31/2013 08:39:08]:CContentDefinition::Finalize failed; 0x800700b7
    [EB0][Thu 10/31/2013 08:39:08]:Failed to finalize content '5263454e-e3de-49e5-a077-48dba0eefe93' for package 'ONB0007A'. Error code: 0X800700B7
    If I reboot the DP, then the package gets updated.  I'd like to figure out how to make this not happen :)

  • SCCM 2012 SP1 CU1 Remote tools problem on device client settings.

    After i removed remote tools on device client settings, i can't remote(RDP) my domain controller and member servers anymore, how can i fix it?.
    Thanks a lot in advance.

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

    Hi,
    I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
    wsyncmgr:
    Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
    SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
    3668 (0x0E54)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
    on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
    3668 (0x0E54)
    Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
    1/9/2015 12:00:00 PM 3668 (0x0E54)
    WCM:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Remote configuration failed on WSUS Server.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
    Regards,
    Malwinder

    WCM:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    It's not only a matter of installing the console, but also those hotfixes on a remote server ...
    Torsten Meringer | http://www.mssccmfaq.de

  • Windows Updates are not getting download after installation of SCCM 2012 SP1

    I have installed SCCM 2012 SP1 step by step as per microsoft documents, Now I am getting error while downloading windows updates from microsoft site.
    Error by WCM.log : System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to read data from the transport
    connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
    Error By wsyncmgr: DB Server not detected for SUP XYZ.com from SCF File. skipping.
    Sync failed: WSUS update source not found on site KSL. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=KSL-MUM-SCCM01.KSEC.KotakGroup.com SITE=KSL PID=3688 TID=4752 GMTDATE=Tue May 21 10:59:06.745 2013 ISTR0="getSiteUpdateSource" ISTR1="WSUS
    update source not found on site KSL. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    I have reinstall my SUP on site server, i have my WSUS & site server is on same server. I have kept my sup setting as per requirment (8530 & 8531)
    Kindly suggest is any other settings need to be done on server side.

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    From your log snip-it, it looks like the firewall is causing your problem. Temporary turn off the firewall and see if that solves your problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • SCCM 2012 SP1 - SUP Error

    Hi guys,
    i upgraded my SCCM 2012 test Environment to SP1. I have only one Primary Site Server which holds all Roles. Everything seems to work fine except the SUP Role. If i try to synchronize the latest Updates it says that it cannot find a WSUS Server
    and i should check WCM.LOG.
    Within WCM.LOG i can find the following Messages:
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 08:56:44 3620 (0x0E24)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:07:56 3620 (0x0E24)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:04 3620 (0x0E24)
        SUP0: CM01.TEST.LOCAL, group = , nlb = SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Bad Configuration, SUPs present but no default SUP SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Default SUP not specified SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Setting new configuration state to 0 (WSUS_CONFIG_NONE) SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    Waiting for changes for 47 minutes SMS_WSUS_CONFIGURATION_MANAGER 09.01.2013 09:08:05 3620 (0x0E24)
    So in General this tells me that it can find a SUP but this one is not specified as a DEFAULT SUP. How can i tell SCCM that this is my Default SUP? (I only have this one and it is configured to sync from Microsoft Update site). I have never seen
    this before so i guess this is related to SP1?
    PS: I also installed the 2 necessary WSUS Updates before i upgraded to SCCM SP1.
    Thanks in lot in advance.
    Stefan

    None of your solutions apply to WSUS 4.0 on Server 2012
    None of the specified patches applies or will run on a Windows 2012 Std server. They either report that WSUS 3 SP 2 isn't installed OR that the patch isn't applicable to the server version installed.
    Here is a excerpt of MY WCM.LOG
    I have a fully patched Windows 2012 Standard Server, Fully updated SCCM 2012 SP1 installed, and am connected to a fully patched SQL2012 Server on another fully patched Windows 2012 Std server.
    Ports 8530 and 8531 designated on both the WSUS 4.0 Role and SCCM 2012 SP1 system (both are on same server)
    SUP0: SCCM2012.xxdomainname.ORG, group = , nlb = ~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.496+420><thread=6052 (0x17A4)>
    Updating active SUP groups...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.503+420><thread=6052 (0x17A4)>
    Bad Configuration, SUPs present but no default SUP  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.510+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.525+420><thread=6052 (0x17A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.535+420><thread=6052 (0x17A4)>
    Waiting for changes for 11 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.543+420><thread=6052 (0x17A4)>
    Wait timed out after 11 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:04:54.569+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.577+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.585+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.592+420><thread=6052 (0x17A4)>
    Wait timed out after 60 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:04:54.714+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.721+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.728+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.734+420><thread=6052 (0x17A4)>
    Randall

  • SCCM 2012 SP1 SUP on Windows Server 2012

    Hi sccm guys,
    I'm having Troubles to get the SUP role working on my Windows Server 2012. I'm using SCCM 2012 SP1. I installed (and did not configure) the WSUS role from the Server Manager. I Chose to install the DB on the local SQL instance (no WID instance).
    Then I added the SUP role to the Server and configured it with the seperate wsus Administration site (Ports 8530 and 8531).
    WSUS gets configured partially (Proxy Settings and "Products and Classification" Options only for Office and Windows)
    The folowing error pops up in the wcm.log
    Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
    Any clues?
    Cheers
    Sebastian Bammer

    Also did not fix my issue. A round of my logs:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
    15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
    15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
    Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.2.9200.16384
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.2.9200.16384
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER
    15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
    Using DOMAIN\Administrator credentials for network connections
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Verify Upstream Server settings on the Active WSUS Server
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Done using DOMAIN\Administrator credentials
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER
    15/01/2013 8:28:59 a.m. 3556 (0x0DE4)
    Using DOMAIN\Administrator credentials for network connections
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:28:59 a.m.
    3556 (0x0DE4)
    Done using DOMAIN\Administrator credentials
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:14 a.m.
    3556 (0x0DE4)
    Successfully refreshed categories from WSUS server
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:16 a.m.
    3556 (0x0DE4)
    Using DOMAIN\Administrator credentials for network connections
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
    3556 (0x0DE4)
    Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
    3556 (0x0DE4)
    Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
    3556 (0x0DE4)
    Category Product:587f7961-187a-4419-8972-318be1c318af (Microsoft Dynamics CRM 2011 SHS) not found on WSUS
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
    3556 (0x0DE4)
    Starting WSUS category sync from upstream...
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:21 a.m.
    3556 (0x0DE4)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER
    15/01/2013 8:29:26 a.m. 3556 (0x0DE4)
    Using DOMAIN\Administrator credentials for network connections
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
    3556 (0x0DE4)
    Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
    3556 (0x0DE4)
    Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:26 a.m.
    3556 (0x0DE4)
    Done using DOMAIN\Administrator credentials
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:41 a.m.
    3556 (0x0DE4)
    Successfully refreshed categories from WSUS server
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Done using DOMAIN\Administrator credentials
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Using DOMAIN\Administrator credentials for network connections
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Attempting connection to WSUS server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Successfully connected to server: SCCM01.domain, port: 8530, useSSL: False
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Category Product:587f7961-187a-4419-8972-318be1c318af (Microsoft Dynamics CRM 2011 SHS) not found on WSUS
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Subscription contains categories unknown to WSUS.
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Done using DOMAIN\Administrator credentials
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
    SMS_WSUS_CONFIGURATION_MANAGER 15/01/2013 8:29:42 a.m.
    3556 (0x0DE4)
    STATMSG: ID=6603 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=SCCM01.domain SITE=AKL PID=1544 TID=3556 GMTDATE=Mon Jan 14 19:29:42.723 2013 ISTR0="SCCM01.domain" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
    ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER
    15/01/2013 8:29:42 a.m. 3556 (0x0DE4)
    Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER
    15/01/2013 8:29:42 a.m. 3556 (0x0DE4)
    Thanks Christoph

  • WSUS 4.0 and SCCM 2012 SP1 Sync Errors

    SCCM 2012 SP1 is installed on a Windows 2012 Std server with the WSUS 4.0 Role installed.
    All other links I have found list a 2008 R2 Server with WSUS 3.0 SP2 hence all the "fixes" revolve around hot fixes and patches/settings for WSUS 3.0 or 2008 R2 systems.
    WSUS is set for port 8530/8531
    SCCM SUP is set for ports 8530/8531
    Both are on same machine (single site SCCM 2012 SP1 System)
    What does Bad Configuration, SUPs present but no default SUP
    mean and how do I fix it?
    Recent entry in my WCM.LOG states:
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.401+420><thread=6052 (0x17A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.454+420><thread=6052 (0x17A4)>
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.481+420><thread=6052 (0x17A4)>
    Changes in active SUP list detected. New active SUP List is:~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.489+420><thread=6052 (0x17A4)>
        SUP0: SCCM2012.xxdomainnamexx.ORG, group = , nlb = ~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.496+420><thread=6052 (0x17A4)>
    Updating active SUP groups...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.503+420><thread=6052 (0x17A4)>
    Bad Configuration, SUPs present but no default SUP  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.510+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.525+420><thread=6052 (0x17A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.535+420><thread=6052 (0x17A4)>
    Waiting for changes for 11 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 10:54:14.543+420><thread=6052 (0x17A4)>
    Wait timed out after 11 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:04:54.569+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.577+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.585+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 11:05:04.592+420><thread=6052 (0x17A4)>
    Wait timed out after 60 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:04:54.714+420><thread=6052 (0x17A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.721+420><thread=6052 (0x17A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.728+420><thread=6052 (0x17A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-14-2014 12:05:04.734+420><thread=6052 (0x17A4)>
    Randall

    Here is my WCM Log from this mornings "re-attempt"
    Trigger event array index 0 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:22.156+420><thread=5540 (0x15A4)>
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.179+420><thread=5540 (0x15A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.181+420><thread=5540 (0x15A4)>
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.194+420><thread=5540 (0x15A4)>
    No SUPs are present  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.199+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.220+420><thread=5540 (0x15A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.224+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:27.226+420><thread=5540 (0x15A4)>
    Trigger event array index 0 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:37.356+420><thread=5540 (0x15A4)>
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.388+420><thread=5540 (0x15A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.493+420><thread=5540 (0x15A4)>
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.541+420><thread=5540 (0x15A4)>
    Changes in active SUP list detected. New active SUP List is:~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.543+420><thread=5540 (0x15A4)>
        SUP0: SCCM2012.MORTONGENERAL.ORG, group = , nlb = ~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.546+420><thread=5540 (0x15A4)>
    Updating active SUP groups...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.550+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.553+420><thread=5540 (0x15A4)>
    Setting new configuration state to 0 (WSUS_CONFIG_NONE)~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.559+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.562+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.593+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:42.596+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.611+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.614+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.617+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:47.620+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.634+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.637+420><thread=5540 (0x15A4)>
    Trigger event array index 0 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:52.640+420><thread=5540 (0x15A4)>
    SCF change notification triggered.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.761+420><thread=5540 (0x15A4)>
    Populating config from SCF  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.798+420><thread=5540 (0x15A4)>
    Waiting for changes for 24 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.813+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.823+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:51:57.826+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.840+420><thread=5540 (0x15A4)>
    Waiting for changes for 23 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.843+420><thread=5540 (0x15A4)>
    Trigger event array index 1 ended.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.846+420><thread=5540 (0x15A4)>
    File notification triggered.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:02.849+420><thread=5540 (0x15A4)>
    File notification triggered WCM Inbox.~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:07.863+420><thread=5540 (0x15A4)>
    Waiting for changes for 23 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 07:52:07.866+420><thread=5540 (0x15A4)>
    Wait timed out after 23 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:30.913+420><thread=5540 (0x15A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.917+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.920+420><thread=5540 (0x15A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 08:15:40.923+420><thread=5540 (0x15A4)>
    Wait timed out after 60 minutes while waiting for at least one trigger event.  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:31.041+420><thread=5540 (0x15A4)>
    Timed Out...~  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.045+420><thread=5540 (0x15A4)>
    Default SUP not specified  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.048+420><thread=5540 (0x15A4)>
    Waiting for changes for 60 minutes  $$<SMS_WSUS_CONFIGURATION_MANAGER><03-17-2014 09:15:41.051+420><thread=5540 (0x15A4)>
    Randall

  • SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip

    we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we  run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
    task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
    Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
    Find below the smsts.log file
    Main error in the log file is
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151.    TSMBootstrap    2/12/2014 1:05:41 PM    1984 (0x07C0)
    Xtract from LOG
    SMSTSRebootDelay=60    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue.    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootRequested=WinPE    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    Process completed with exit code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    !--------------------------------------------------------------------------------------------!    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Successfully completed the action (Restart to Windows PE) with the exit win32 code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionRetCode=0    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionSucceeded=true    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Clear local default environment    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Executing command line: "bcdedit.exe"    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    CreateProcess failed. Code(0x80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Command line execution failed (80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Staging boot image UNB0003A    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    ResolveSource flags: 0x00000000    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    SMSTSPersistContent: . The content for package UNB0003A will be persisted    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    WinHttp credentials set    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    List of files to be downloaded    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim     TSManager    2/12/2014 1:02:22 AM    1876
    (0x0754)
    VerifyContentHash: Hash algorithm is 32780    TSManager    2/12/2014 1:02:22 AM    1876 (0x0754)
    Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Copying boot image locally...    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Failed to find ADK installation root registry key    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Applying image 1 to volume E:\_SMSTaskSequence\WinPE    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Capturing WinPE bootstrap settings    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    ==============================[ OSDNetSettings.exe ]===========================    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    No adapters found with non-empty DNSDomainSuffixSearchOrder    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Adapter "ROOT\SYMC_TEEFER2MP\0000" not found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    OSDNetSettings finished: 0x00000000    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Installing boot image to hard drive    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Backing up existing boot system before trying to set up new boot system    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    BootLoader::backup: C:\, E:\_SMSTaskSequence\backup    TSManager    2/12/2014 1:02:39 AM    1876 (0x0754)
    BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR    TSManager    2/12/2014 1:02:45 AM    1876 (0x0754)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:46 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Expand a string: %_SMSTSMDataPath%\Logs    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    <![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">  
          1/1/1601 12:00:00 AM    1995266923 (0x76ED5B6B)
    ==============================[ TSBootShell.exe ]==============================    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Debug shell is enabled    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Waiting for PNP initialization...    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Booted from fixed disk    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Found config path E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Restoring boot system from E:\_SMSTaskSequence\backup    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Successfully loaded the BCD boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully loaded an exported NTLDR boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    BootLoader::restore: E:\_SMSTaskSequence\backup, C:\    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully merged logs from cache.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading bootstrap settings from E:\_SMSTaskSequence\WinPE    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading saved WinPE settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00'    TSBootShell  
     2/12/2014 1:04:06 AM    796 (0x031C)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring WinPE bootstrap settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating WinPE answer file    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Setting hive location to "X:\windows\system32"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Getting namespace "Microsoft-Windows-Setup" for architecture "x86"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring global network settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Join type:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    IP filter sec enabled: false    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    No adapters found in environment.  Performing global configuration only.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Executing command line: wpeinit.exe -winpe    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Starting DNS client service.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    No adapters found in environment.  Performing global finalization only.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing global network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS for WINS enabled: false    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    LMHosts file enabled: true    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Host lookup file:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    WINS scope ID:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    ==============================[ TSMBootStrap.exe ]==============================    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Failed to open PXE registry key. Not a PXE boot.    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Resuming Task Sequence in WinPE    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat".    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Updating the local data path in the Task Sequencing Environment.    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxSize to 1000000    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxHistory to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogLevel to 0    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogEnabled to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogDebug to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Command line for extension .exe is "%1" %*    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    ==========[ TsProgressUI started in process 2004 ]==========    TsProgressUI    2/12/2014 1:05:41 AM    2008 (0x07D8)
    Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
    In dire need of help,
    I have already gone through the below articles on the NET
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
    Awating response,
    Hasan Reza

    Well Finally I sorted my issue ,
    Just want to share the solution, may be it would be helpful to some one else and save some times
    The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
    1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
    due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
    2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
    Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
    As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
    All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
    Thanks,
    Hasan Reza.
    http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen

  • SCCM 2012 SP1 - OS Deployment - hash could not be matched for the downloded content

    I've got a newly deployed SCCM 2012 SP1 running on Windows Server 2012. The W2K12 runs as vm on ESX 5.1. I'm having very odd issues with OS deployment. The TS keeps failing when processing SCCM client installation - it downloads the package but then it fails
    straight away with the 80091007 - hash values couldn't be matched error - some extract from smsts.log attached below. It's very consistent, it happens every time - it downloads and applies the image fine straight after that it bombs out.
    What is very interesting is that it works perfectly fine when I deploy vms (on the same or different host) - the issue seems to be be only affecting physical machines (laptops desktops). This might suggest some network issues (vSwitch with Cisco switches) but
    the config on the switch is very simple and this shouldn't be the case.
    I had a few virtualised SCCM 2007 installations (ESX 5 and 4) and it always worked with no problems.
    I tried to recreate the package (changing source directory), turn binary differential replication on and off, copy the content of the package to the dist point or not copy. Push client installation (or other package deployments) work fine
    When I tried to deploy with no download - sometimes it works but most of the time I'd get the files/folder corrupt error (can't remember the No)
    This is starting to drive me crazy - There are some significant changes in the way SCCM 2012 is validating package integrity (like Content Lib folder) but the consistency of this problem is just very odd.
    Anyone has any clues?
    thanks
     - Downloaded file from http://GTKVMGMT05.GTK.LOC...m?/x64/wic_x64_enu.exe to C:\_SMSTaskSequence\Packages\GTK0000C\x64/wic_x64_enu.exe 
     - Download done setting progress bar to 100
    VerifyContentHash: Hash algorithm is 32780
    c:\_smstasksequence\packages\GTK0000c\i386 is a directory. Setting directory security
    c:\_smstasksequence\packages\GTK0000c\x64 is a directory. Setting directory security
     - Hash could not be matched for the downloded content. Original ContentHash = 5EF3A189C48F3469440A83026EC8ECD36EAD6EAF3B5D35663F8201BDE175413C, Downloaded ContentHash = FA4516EDD2D7907F8FA472A3E1B717DF2DD4A0976CD4CEAE11045EE62EC8C661
    0L == TS::Utility::VerifyPackageHash(pszContentID, sDestination), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,2999)
     - DownloadContentAndVerifyHash(pszPackageID, L"SMSPackage", saHttpContentSources, saSMBContentSources, saMulticastContentSources, sDestination, dwFlags, L"", 0, dwPackageFlags, pszUserName, pszUserPassword ), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3106)
     - DownloadContentLocally(pszSource, sSourceDirectory, dwFlags, hUserToken, pszUserName, pszUserPassword), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3331)
    ResolveSource(pszSource, sSourceDirectory, dwFlags, 0, 0, 0), HRESULT=80091007 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,3221)
    TS::Utility::ResolveSource(sClientPackageID, sClientPackagePath), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\basesetuphook.cpp,1655)
     - Failed to resolve package source "GTK0000C"
     - Exiting ConfigureEx: 0x80091007
     - BaseSetupHook::configure(sWindowsDir), HRESULT=80091007 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\osdsetuphook.cpp,292)
     - Failed to configure OSD setup hook (0x80091007)
     - Failed to configure OSD setup hook (0x80091007)

    is this the only indication of a problem in your smsts.log file ? did you apply the
    authenticode hotfix or have you
    downloaded the SP1 media after that hotfix was applied ?
    Step by Step Configuration Manager Guides >
    2012 Guides |
    2007 Guides | I'm on Twitter > ncbrady

  • New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

    Hi,
    I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400.  But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
    and not 5.00.7804.1400. 
    For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client? 
    Thanks,
    Nick

    Hi,
    Here's some good information to look over:
    http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
    I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
    http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

Maybe you are looking for