SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012

I am rebuilding my SCCM 2012 lab on Server 2012 R2 x64 OS now.
I have 1 primary site, remote SQL server 2012, and remote WSUS server.
Is the WSUS console still required on my primary site running server 2012? If so are the below the correct steps to get this working?
Install Console on primary server:
Go to Server Manager à Add Roles and features, Navigate to the features section.
Remote Server Manager tools
>Role Administration Tools
--Select Windows Server Update Services Tools Only
Are there any post hotfixes to install?
Intalling WSUS full version on remote server:
Go to Server Manager à Add Roles and features, Server Roles section.
Windows Server Update Services
Do I need to select this as well on the remote wsus server? >Role Administration Tools -Select Windows Server Update Services Tools Only
Since my SQL server is on a remote server do I select the below only?
Are there any post hotfixes to install?

Hi,
One Part of the question is already answered. The second part is: If you want to use a remote SQL Server you need to select exactly what you selected in your screenshot.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de

Similar Messages

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
Thanks

Hi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

How to switch between SQL Server Express and SQL Server Evaluation

I have both SQL Server Express and SQL Server Evaluation installed on my laptop.
I am wondering how to start SQL Server Evaluation; when I click All Programs > SQL Server Management Studio, I always get SQL Server Express (which I installed on my laptop a couple years ago).
I just downloaded SQL Server Evaluation (a couple days ago).
Whenever I try to access SQL Server Evaluation, I always seem to get SQL Server Express.
Sorry if this is a trivial thing; I just can’t seem to get it to work (and I Googled for a solution before posting this).
Thanks everyone!!

Ah! It worked!! This is great!! It seems like I can connect to my version of SQL Server Evaluation, named 'EXCEL-PC\EXCEL'.
Somehow, though, I seem to keep getting errors in my BIDS when I try to run an SSIS project. See below:
Ah! It worked!! This is great!! It seems like I can connect to my version of SQL Server Evaluation, named 'EXCEL-PC\EXCEL'.
I am getting an error that VS is unable to load a document:
BIDS has to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation.
To install BIDS, run SQL Server Setup and select Business Intelligence Development Studio.
#1) I recently downloaded and installed SQL Server Evaluation (specifically for the opportunity to try using BIDS and learn about this technology).
#2) When I run BIDS > SSIS, I get the error I described above.
#3) I have had SQL Server Express installed for a couple years on my laptop
So, my question is this: is it possible that BIDS > SSIS is picking up my SQL Server Express, instead of SQL Server Evaluation?
If so, how can I get BIDS to point to SQL Server Evaluation?
You can see in the image above that I have my BIDS Data Connections pointing to EXCEL-PC\EXCEL, which is the name of my SQL Server Evaluation.
Is this correct? Why doesn’t this work?
I’ve spent some considerable time on this. I’m close to just uninstalling EVERYTHING pertaining to SLQ Server, and just reinstalling SQL Server Evaluation, but this will take some time, and I don’t necessarily want
to get rid of my SQL Server Express. However, if that’s the only way to get this working, then that’s what I’ll do.
I’d greatly appreciate any insight into this!!

How to add sql server (SQLEXPRESS) AND sql server Agent(SQLEXPRESS) in sql server Configuration Manager

When I had uninstall Sql Server 2008 R2, that time I had uninstalled instances (SQLEXPRESS and MSSQLSERVER) and again installed sql server 2008 r2 setup .
Before uninstalling from control panel >Uninstall program showed two setups
1) Microsoft sql server 2) Microsoft sql server R2 , I uninstalled both.
As i installed SQL R2 again, it is showing only 1 instance ie "Microsoft sql server R2" but the other instance is some how missing -"Microsoft sql server" and
also sql server (SQLEXPRESS) AND sql server Agent(SQLEXPRESS) services from sql server configuration manager are missing
How to retain the missing instance and the above services?
Plz give replay

Hi Tushar,
I need to ask you a question here.
Why you require SQL Express edition on your machine, if there is no need you can safely ignore it and continue using SQL Server 2008 R2 edition.
Express edition can also get installed if you happen to have installed Visual Studio 2010 for instance.
If you need it then you must install SQL Server Express edition, It is a freeware and can be download from Microsoft website.
BR, Shashikant

Changing sql server service and sql server agent service startup account in SQL Server hosting SharePoint DB

Hi
i have a sharepoint deployment with one SQL Server (running on VM) hosting the config DB and another SQL Server (Physical Host because VM was running out of space) to host the huge Content DBs. I need to schedule automatic backups of the Content DBs to a
network share. For that i need to run the SQL Server Service with an account having permissions to the share as suggested in https://support.microsoft.com/kb/207187?wa=wsignin1.0
I tried changing the logon as a service account to a domain
account which has permissions to the Network Share and is also in local Administrators group of SQL Server and has "public and sysadmin" roles in SQL Server but that caused an issue. the SharePoint Web Application started showing a White Screen so
I had to revert back to the default accounts i.e. NT Service\SQLSERVERAGENT and NT Service\MSSQLSERVER. I viewed the event logs . These are the types of error i got after changing the logon as a service account to a domain account
1) Information Rights Management (IRM): Retried too many times to initialize IRM client. Cannot retry more. Retried times is:0x5.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5148
Version
15
Level
2
Task
9
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T04:46:04.750899500Z
EventRecordID
176477
Correlation
[ ActivityID]
{8FACE59C-1E17-50D0-7135-25FDB824CDBE}
Execution
[ ProcessID]
6912
[ ThreadID]
8872
Channel
Application
Computer
Security
[ UserID]
S-1-5-21-876248814-3204482948-604612597-111753
EventData
hex0
0x5
2)
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5586
Version
15
Level
2
Task
3
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T07:01:35.843757700Z
EventRecordID
176490
Correlation
[ ActivityID]
{50B4E59C-5E3A-50D0-7135-22AD91909F02}
Execution
[ ProcessID]
6912
[ ThreadID]
5452
Channel
Application
Computer
Security
[ UserID]
S-1-5-17
EventData
int0
0
string1
The target principal name is incorrect. Cannot generate SSPI context.

Hi Aparna,
According to your description, you get the above two errors when scheduling backups of Content DB. Right?
Based on those two error messages, they are related to the service principal name(SPN) for SQL Server service. Please verify the if the SPN is registered successfully. You can view it in ADSI Edit or use command line. Please see:
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
When installing SQL Server, those two services below should be registered:
MSSQLSvc/servername:1433
MSSQLSvc/servername
Please check if those SPNs or duplicated SPNs exist. You can use command to reset SPN or remove duplicated SPN and add new one. See:
Setspn.
We have also met this issue when this SPN is registered under Administrator. Please try to register it under Computer. You can add it in ADSI Edit.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Weblogic server10.3.3 (Oracle Weblogic Server 11gR1) and sql server 2008db

Is SQL Server 2008 db supported for use with weblogic server 10.3.3
we use connection pools and XA and weblogic bundled drivers
we are planning an upgrade from 9.2mp3 to 10.3.3 weblogic server
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs103/103_over/supported_db.html#1179245
seems to indicate that only sqlserver 2005 is supported
Is there a more current version of the suported configurations that I am missing ?
Appreciate any feedback on this
Thanks
Best
Yeshwant

contact support for official policy. Technically, the drivers do support the DBMS version.
If you use any higher API than JDBC, there might be a question as to whether a
particulare API was certified with the latter DBMS version, but unless the DBMS
changed so it behaved differently than the previous for the same activity, then
there should be no problem....

Database between two server (sun and sql server)

I have two server. The first used sun solaris with sybase database and the other used windows sql 2000 server without database. What should i do if i put my web homepage at windows based server and my database at sun-solaris-sybase server. Please help..

Hi Ioakim
Performing an atomic transaction(ACID) that spans a source system, BizTalk and then a different destination system is not possible. This is due to the nature of distributed transactions - it may not be practical to hold locks on resources(needed for atomic
transactions) that are spread across different networks. Given that there is no guarantee that the resources may be released in a reasonable amount of time, transactions in BizTalk can only be scoped to and from the BizTalk MessageBoxDb. Or in other words,
you can read a record to BizTalk transactionally and on the send side, send a message from BizTalk transactionally.
However, you can simulate/fake atomic transaction characteristics(although tricky) using compensation logic within BizTalk orchestrations. So, lets say you read+delete a record from SystemA into BizTalk, and that record has to be updated in SystemB.
If for some reason the insert to SystemB fails, you would have to write custom logic in a compensation block that then performs the reverse operation in SystemA - i.e., it inserts back the record in SystemA in this case. So, using compensating actions, it
is possible to ensure that all the systems involved are transactionally consistent at the end of the day.
There's an article from C.Young that discusses this in some detail-
http://geekswithblogs.net/cyoung/archive/2006/12/06/100424.aspx
Thanks
Arindam

Upgrade From SQL Server 2005 to SQL Server 2008 or 2012

Hello this is a silly question but I was able to copy our old database to another hard drive and do an ATTACH to sql 2012 and it worked great now am I crazy or is this too good to be true

Hello this is a silly question but I was able to copy our old database to another hard drive and do an ATTACH to sql 2012 and it worked great now am I crazy or is this too good to be true
To be specific to your question.You can very well attach SQL 2005 database to SQL server 2008 and SQL server 2012.But how your application will respond to New database will be difficult to tell.
I strongly recommend you to see below link
Features depricated in SQL server 2012
http://technet.microsoft.com/en-us/library/cc707782.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Installation Biztalk Server 2013 and SQL on different machines

I want to know if I can install a Biztalk server 2013 and SQL on different machines?

BizTalk Server 2103 and SQL Server (SQL Server
2012 or SQL Server 2008 R2 SP1) can be installed and configured on different machines.
For more instruction about this installation, refer to following MSDN installation guide for BizTalk :
Installation Guides Related to BizTalk Server 2013 and 2013 R2
from the above list download -
"Installing BizTalk Server 2013 and BAM in a Multi-Computer Environment.docx" document for your requirement.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

OraOledb, Linked Servers and SQL Server 2005 issues

Some issues I've come across when using SQL Server 2005 (and SQL Server Express 2005), the OraOLEDB provider (10.2.0.1) and a linked Oracle database (8.1.7.4.0 64-bit)
1) You must set the OraOledb.Oracle\AllowInProcess value to 1 to allow the OraOledb provider to run in SQL Server's process. Without doing this I receive an 'unspecified error' from the OLE DB provider when attempting to run a query
2) When running a ' select * ' query across a linked server using the provider, I receive the following error: Msg 9803, Level 16, State 1, Line 1
Invalid data for type "numeric". I can, however, select all of the columns by name and the query completes (no error). Sometimes the 'select *' query returns a few rows before the error, sometimes it doesn't. The Microsoft Provider for Oracle does not have this problem

Okay... I've got a Win2K3 Std Ed server (x64) running 64-bit SQL Server 2005 Enterprise Edition. I've installed the Oracle 10g 10.2.1 full client and admin tools, added two named services via the NetConfig assistant, and successfully set up (and tested) a connection via the ODBC Administrator to an Oracle database.
Now... when I try to create a new connection manager in SQL Server 2005 Integration Services, the OLEDB provider for Oracle can't be found, and when I try to manually add an underlying OLEDB connection to the database, SQL Server reports:
Test connection failed because of an error in initializing provider. The 'OraOLEDB.Oracle.1' provider is not registered on the local machine.
Does anyone know what I need to do to see my ODBC Server data connections in SQL Server 2005 (64 bit)? I don't have this issue on my 32-bit SQL Server 2005 servers.

SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2

Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)

Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name.   I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark

SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .

I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?

Hi All,
Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?
aa

I think you are confused with the way cluster is installed. Installing SQL on cluster is a two step process. On first node you create a new SQL cluster and on second node you need "AddNode" action.
Same edition media has to be used in above two operation.
you can install two separate instances with one enterprise and one standard.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012

Similar Messages

Maybe you are looking for