SCCM 2012 to SCCM 2012 R2

Hi,
I have a sccm 2012 server and I would like to move to sccm 2012 r2, so do a side by side migration and I was wondering if anyone or MS have documented a process for this.
Other info:
The existing sccm 2012 server is running on W12K and all the roles are on this server, also it is a VM. Going forward I would be installing on W12K R2 and only utilising 2 server one for SQL and the other for all other sccm roles.

The guys are right. You should carry out the two in-place upgrades. However, in answer to your question, the side-by-side migration you are referring to is not supported. Therefore it is not documented. That's not to say it doesn't work - I've seen
it work. It is not supported and therefore MS have not tested it.
http://technet.microsoft.com/en-us/library/gg682006.aspx
You can migrate the following hierarchies:
With System Center 2012 Configuration Manager, you can migrate an existing Configuration Manager 2007 SP2 infrastructure to System Center 2012 Configuration Manager.
With System Center 2012 Configuration Manager SP1, you can migrate an existing Configuration Manager 2007 SP2 infrastructure or an existing System Center 2012 Configuration Manager SP1 infrastructure to System Center 2012
Configuration Manager SP1.
With System Center 2012 R2 Configuration Manager, you can migrate an existing Configuration Manager 2007 SP2 infrastructure or an existing System Center 2012 R2 Configuration Manager infrastructure to System Center 2012 R2 Configuration Manager.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

How to force site code discovery on all the clients, Migration SCCM 2007 to SCCM 2012

HI,
I migrated SCCM 2007 to SCCM 2012 SP1, but the clients does not update the New Site Code Automatically, if I click on Discovery option the client find the new site, but I need do this automatically because are too many clients.
This registry key does not exist on client computers.
HKLM\Software\Microsoft\SMS\MobileClient\GPRequestedSiteAssignmentCode
HKLM\Software\Microsoft\SMS\MobileClient\GPSiteAssignmentRetryInterval(Min)
HKLM\Software\Microsoft\SMS\MobileClient\GPSiteAssignmentRetryDuration(Hour)
Any Help?
Thanks.

Hello ICH-CR,
Thanks for writing to the SysCtr ConfigMgr forums.
I think there are multiple solutions to this issue and you can choose whatever fits best to your scenario.
1. While upgrading the clients from SCCM 2007 to 2012 you can assign the clients to your ConfigMgr 2012 site.
http://technet.microsoft.com/en-us/library/gg682060.aspx#BKMK_AutomaticAssignment
You just need to ensure that you have a boundary group and boundaries. More details on
http://technet.microsoft.com/en-us/library/13694ac5-8f3b-42a9-8040-b23f21c79637#BMBK_CreateBoundaryGrp
I would suggest the first method because if you create another child site, you shouldn't have to reassign the clients back again. If that is unlikely then use the following script which is method no 2
2.
http://gallery.technet.microsoft.com/scriptcenter/Change-sccm-configmgr-cf6e0327
This is a VBSCRIPT and can be ran from a network location using the PSEXC
3. Here is a smaller script
'Replace with your Site Code sSiteCode = "EnterNewSiteCode"
sMachine
= "."
set oCCMNamespace
= GetObject("winmgmts://"
& sMachine & "/root/ccm")
Set oInstance
= oCCMNamespace.Get("SMS_Client")
set oParams
= oInstance.Methods_("SetAssignedSite").inParameters.SpawnInstance_()
oParams.sSiteCode
= sSiteCode
oCCMNamespace.ExecMethod
"SMS_Client",
"SetAssignedSite",
oParams
You can use this script as a logon script .
Anurag
Microsoft Certified Professional| Microsoft Certified Technology Specialist (ConfigMgr)
This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights.
My Blog
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Types of SCCM 2007 to SCCM 2012 Migration

Hi all,
Can i know what are the different types of migration we can do from sccm 2007 to sccm 2012 ?
Thanks

Hi,
There are now in-place upgrade so the only option you have is side-by-side migration. Install the new Configuration Manager 2012 infrastructure and migrate you objects, client e.t.c to all the new CM 2012 site server.
Here is a link that will get you started:
http://technet.microsoft.com/en-us/library/gg699364.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Not able to install sccm agent in sccm 2012 servers after cu3 update

not able to install sccm agent in sccm 2012 servers after cu3 update
MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002 ,below URl specify fix to uninstall Management point ,but in sccm 2012 secondary site canot unintall management point ,please help to install agent in config manager servers
https://blogs.technet.com/b/configurationmgr/archive/2013/11/25/hotfix-quot-error-25150-setup-was-unable-to-register-the-ccm-service-hostingconfiguration-endpoint-quot-when-you-try-to-install-the-client-agent-in-configuration-manager.aspx
ankith

Excellent Article!!!!!! Pls check here, Follow the same steps
http://eskonr.com/2013/09/sccm-configmgr-2012-sp1-cu3-installationcollections-upgrade-clients/
This too
http://it.peikkoluola.net/2013/11/18/update-sccm-2012-to-sp1-cu3/
Thanks, Prabha G

Preloadpackageonsite.exe in sccm 2007 supports sccm 2012 also

HI I have big packages in sccm ,often seeing packages are having issues with replication to child site and DP
Dsame preloadpackageonsite.exe in sccm 2007 supports sccm 2012 also .if supports can any one help to understand sccm 2012
procedure to create package in child sites
ankith

Hi,
No it does not support the new Content management in Configuration Manager 2012, but you can use a builtin tool instead. You export all the content you want to prestage from the console and then on all dp's the utility called extraccontent is placed during
installatioin. Here is how it is done.
http://technet.microsoft.com/en-us/library/hh692395.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Does SCCM 2012 monitor SCCM 2007 as well?

I have a SCOM environment and I have two SCCM environments - one is 2007 and the other is 2012R2. We are migrating from 2007 to 2012R2. I have both SCCM 2007 and 2012 MPs imported.
One thing I've noticed is that all the objects from the 2007 MPs are labeled ConfigMgr 2007, while the objects from the 2012 MPs are just labeled ConfigMgr. And when I create a subscription to send all alerts on ConfigMgr (I filtered to only show objects
in Microsoft.SystemCenter2012.ConfigurationManager.Library MP) it will send out notifications for all SCCM alerts.
So does the 2012 MP monitor 2007 as well? And if so, how can I create a subscription to only notify for 2012? I currently set up the subscription directly against the 2012 servers, but I'd like to have it go against the application instead.
Thanks.
- Get on the floor, do that dinosaur

Yes, we have Exchange. But it doesn't make sense that a subscription criteria set to the ConfigMgr application would send alerts regrading Exchange. Maybe because the SCCM client is installed on those servers...?
False alerts as in SCOM thinks one thing but its not actually the case. For example, thinking that an Exchange server is a SCCM server. And Alerting on SCCM 2007 instead of 2012.
- Get on the floor, do that dinosaur

Deploy SQL Management Studio 2012 through SCCM

Hello,
Has anyone successfully deployed SQL Management Studio 2012 with SCCM?
A couple of specific questions:
- Which folder from the SQL Media is required to ensure that only Management Studio deploys (we would like to limit the size of the deployment Package)?
- What command line options do we need to use to install the Advanced version of Management Studio with all of the Tools and Books Online. I have found the following but there is not a clear distinction about what is required and what is optional:
http://msdn.microsoft.com/en-us/library/ms144259.aspx
- Can someone confirm the following command line options for machine that has 2008 R2 Management Studio on it?
Setup.exe /q /ACTION=upgrade /IACCEPTSQLSERVERLICENSETERMS /FEATURES=Tools
- Can someone confirm the following command line options for a new installation of 2012 Management Studio?
Setup.exe /q /ACTION=Install /IACCEPTSQLSERVERLICENSETERMS /FEATURES=Tools
- Do I need to use /PID for the product key if I am only installing Management Studio?
Thank you,
Matt

Hello,
I had a couple of failed upgrades involving SSMS while testing on one of my laptops with a Hyper-V machine. I couldn’t blog about it because I couldn’t find the reason myself. I ended uninstalling the tools on SQL Server 2008 R2, and then proceeding with the
upgrade. Both issues occurred with RC0. I used Hyper-V snapshots to create restore points.
Besides that I had some issues enabling .NET Framework on Windos Server 8 using the GUI. However, enabling .NET Framework from the command prompt works perfectly.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SCCM 2012 SP1 + WSUS + Server 2012 + SQL Server 2012

Hi all;
I installed SCCM 2012 with Sp1 for my site server and everything is going well.. And than i installed the WSUS role on my Windows Server 2012 and SCCM 2012 SP1 it gave an error message which is "Fatal Error: The schema version of the database is from a newer
version of WSUS than currently installed. You must either patch your WSUS server to at least that version or drop the database." My database server is SQL Server 2012... Do you know any pathc for WSUS or SQL Server 2012 doesnt support WSUS yet???
Thank You...
MCT

Normally if you are going to install SCCM 2012 SP1 +Windows 2012 with SQL 2012, Then you better use the SQL 2012 sp1.
also when you are installing the WSUS version 6.2 which come with server 2012 make sure you leave the default settings as it is. it shows in the below article.
also when you are giving the path to save the WSUS contents make sure the drive you going to create the wsus folder and the place where you going to download the updates is having free disk space and its formatted with the NTFS volume. Also the service account
you are using for this configuration should have the admin rights to the location of the wsus folder you going to create,
Thanks
Hasitha

Top 4 basic issues that are encountered in SCOM 2012 and SCCM 2012

HI,
I need to give a presentation on the basic issues that are encountered in SCOM 2012 and SCCm 2012.
Can anyone help me out with this?
Thanks in advance
Rohith Kumar

Hi,
I am not familiar with SCCM, so I will give some issue I encounterred in SCOM:
1. Not monitored and grey agent, here is an article for your reference:
http://technet.microsoft.com/en-us/library/hh212723.aspx
2. Failed to discover and install agents, this may caused by the action account or install account does not have proper permissions to install the agents. Some time maybe the discovery rule is not enabled.
3. Failed to import Management Pack, this may caused by references MPs are not imported to the management group, or sometime the proper referenced MPs are imported, but there may be incorrect typing in the XML file which defines the management pack.
4. Runas account and Action account fail. If you change password for action account, you may also need to change the password everywhere the account is used in SCOM. For run as account, if the account does not have enough right to run some tasks, we may
encounter errors. You may refer to the below link which take SQL mp for example:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
Regards,
Yan Li
Regards, Yan Li

Cross Forset Migration from sccm 2012 to sccm 2012RS

Hi all,<o:p></o:p>
We have a plan to migrate
sccm 2012 to sccm 2012 R2 on trusted forest (cross forest migration)<o:p></o:p>
Please share possibility...<o:p></o:p>
Thanks, Mariappan Shanmugavel

Possibility for what?
Migration only works from ConfigMgr 2007 SP2 or from the same version of ConfigMgr 2012 thus will not be able to migrate from 2012 to 2012 R2. You will need to upgrade your 2012 site to 2012 R2 first and then perform the migration. The TechNet docs clearly
show this: http://technet.microsoft.com/en-us/library/gg699364.aspx
ANd, as Torsten pointed out, if you are simply planning on moving the existing site server, that isn't supported and won't work either.
Jason | http://blog.configmgrftw.com | @jasonsandys

Client Migration from SCCM 2007 to SCCM 2012 via GPO

what
installation properties i can use to migrate client from sccm 2007 to sccm 2012 via gpo?
Thanks!!
Atenciosamente Julio Araujo

It all depends on your needs, I suggest that you look at this first :
All properties can be set by using GPO, it's not different from push.
http://technet.microsoft.com/en-us/library/bb632469.aspx
http://technet.microsoft.com/en-us/library/bb633010.aspx
http://social.technet.microsoft.com/wiki/contents/articles/25118.deploying-sccm-2012-r2-clients-using-group-policy.aspx
Benoit Lecours | Blog: System Center Dudes

Migrating Clients from SCCM 2007 to SCCM 2012 R2 via GPO

Hello.
I can do the migration of customers from SCCM 2007 to SCCM 2012 via GPO?
When I'm migrating customers from SCCM 2007 to SCCM 2012 I have to keep the boundaries of SCCM 2007 or just the SCCM 2012?
Atenciosamente Julio Araujo

For migrating the clients you can use any client deployment method that's available (see for planning your strategy: (http://technet.microsoft.com/en-us/library/gg712283.aspx).
During the client migration I would also start with migrating your boundaries. The most important thing is that you have no overlapping boundaries for site assignment when you are using auto assignment.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Migrating Clients from SCCM 2007 to SCCM 2012 R2 via SCCM 2007 PACKAGE

I can migrate sccm clients from sccm 2007 to sccm 2012 using sccm 2007 package with sccm 2012 client?
Thanks!
Atenciosamente Julio Araujo

Thanks for help me Peter and Torsten but this documentation says:
"You cannot upgrade Configuration Manager 2007 clients to System Center 2012 Configuration Manager by using this method.
In this scenario, use automatic client upgrade, which automatically creates and deploys a package that contains the latest version of the client."
I Need migrate clients from sccm 2007 to sccm 2012 r2 and
I thought ofcreate a package in sccm 2007 with a sccm 2012 client.
Atenciosamente Julio Araujo

How to migrate the computers from SCCM 2007 to SCCM 2012

Hello,
Could anyone tell me how to mirgrate the computers present in SCCM 2007 to SCCM 2012.
Does the "collection migration" job migrate the computers or devices present in the collection? I tried this but computers were not migrated.
Should we again discover the computers in SCCM 2012?
Thanks,
SreehariG

There is no migration job in CM12 that will migrate CM07 clients. You need to install CM12 agent on your CM07 client in order to migrate them. During the installation the existing CM07 client will be uninstalled. You can use any supported
client deployment methods to migrate to your new CM12 environment. More information here:
http://social.technet.microsoft.com/Forums/en-US/configmanagermigration/thread/71175a47-22fe-4284-871c-834c0c999075

SCCM 2007 to SCCM 2012: Failed Packages are reinstalled ??

We're going to migrate SCCM 2007 to SCCM 2012 (side by side).
On SCCM 2007 we have (for example): Advertisement "ADV1" that execute program "Program1" of Package "Package1". (example....)
What happend if a computer "PC1" is migrated to SCCM 2012 when execution result of "ADV1" on SCCM 2007 was failed ??
1) If I migrate only "Package001" and create a new deployment "Deploy1" to launch program "Program1" of Package "Package1 , by default, "PC1" is going to execute "Deploy1". I known it...
2) If I migrate "Package001" and "ADV1".....Will "PC1" execute "ADV1" on SCCM 2012 ???? This is my question
Thanks

Taken directly from Technet, Regards Damon.
Will
advertisements rerun after they are migrated?
No. Clients that you upgrade from Configuration Manager 2007 will not rerun advertisements that you migrate. System Center 2012 Configuration Manager retains the Configuration
Manager 2007 Package ID for packages you migrate and clients that upgrade retain their advertisement history.
https://technet.microsoft.com/en-au/library/gg682088.aspx

SCCM 2007 to SCCM 2012 Migration_Design

Hi all,
We are about to migrate from SCCM 2007 to SCCM 2012. How to map the Hierarchy
Central site – CAS
Primary – Primary
Child Primary – Secondary or Primary
Is that correct?

Hi,
Firstly, you could read through the document below to plan your hierarchy.
http://technet.microsoft.com/en-us/library/gg712681.aspx#BKMK_PlanHierarchy
The following document contains information about the support limits at each site type and for client-facing site system role, and the number of clients (devices) that are supported by a Configuration Manager hierarchy.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteAndRoleScale
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 to SCCM 2012 R2

Similar Messages

Maybe you are looking for