SCCM 2012 usage report for remote users

Hi,
Can someone help to get the SCCM usage report for all remote users who accessed particular application remotely on windows 7 workstation
Regards,
Madhan

If the application is something and executable that the users have to start, you can use Software Metering.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

SCCM 2012 Query report for specific software installed.

I have Reporting point installed and it seems to be working as I was able to run OS reports.
Here's what I would like to do.
1. I need a query/report to show us all the machines that do not have Microsoft Forefront Endpoint Protection installed.
2. I also need a query/report showing what machines still have Sophos AV installed.
Any help is greatly appreciated it.
Thanks,
Voev

I was not able to use the Reporting to get computers without FEP installed. So I did a workaround.
Create Device Collection for computers with FEP installed
1. Device Collections => Create Device Collection =>name it "Computers with FEP installed=> Query Rule Properties => Edit Query Statement => Criteria tab => Add the following statements
Criterion Type: Simple value
Where: Installed Software - ARPDisplay Name
Operator: is equal to
Value: System Center 2012 Endpoint Protection (as appeared in Add/remove program name)
Create Device Collection for computers without FEP installed
1. Device Collections => Create Device Collection => Name "Computers without FEP Installed" => Query Rule Properties => Add Rule => Include Collections => Tick "All Systems" => OK => then you need to add
the Exclude by => Add Rule => Exclude Collections => Tick " Computers with FEP Installed => OK
So in my "All Systems" Collection has 1000 members
Computers with FEP Installed collection has 900 members
Computers without FEP Installed collection has 100 members
Add the with FEP installed & without FEP installed collections together is equal to 1000 members of the All Systems.

Usage Report for SSM 7.0

Usage Report for SSM 7.0
We need to track the usage of SSM by our users and report the number of logins.
I believe there is a trace file that is produced somewhere in SSM.
Can anyone suggest the best method to produce a 'Usage Report' based on a trace file or something simliar?
Regards
David

Rohini,
The direct answer for this question is to look into some web analytic tools. Basically, you tag each page with hyperlink markup language that the web analytic tools tracks.
A typical web analytic tool can show you which pages were visited (and which weren't), who came in to look and how long they stayed - usually for tracking outside users you are just getting IP addresses, but with tracking internal folks you will be able to set it up to track them. Also they include things like typical user paths - where did they land and then where did they go.
This is something you would work with using the analytic tool you selected. Web analytics is a whole discipline onto itself and so you shouldn't have any problems finding consultants to set up whatever software you want to use. My experience, from long ago, was that these are tools have many out of the box features that make it easy to set up.
Most web analytic tools are set up for customers/consumers/visitors and used by marketing or web designers. When you look at employees as your customers/visitors, there isn't a whole lot of difference in setting up a tool to track that kind of usage.
As I said before, I don't have any recommendation to provide about which tool would exactly meet your need, many come with a variety of options, plans, and pricing.
Good luck,
Bob

Extract Usage Report for audit purpose

Hi All,
I want to extract system usage report for SAP eSourcing system ..
for example:
names of all of the individuals who have logged into the system within a particular timeframe...
thanks in advance...

Hi Andrzej
USR02 will not capture situations whereby a user was created and then deleted within the time frame
SUIM user change documents would capture user creation in a system.
Regards
Colleen

SCCM 2012 R2 Report Viewer not working.

I have recently upgraded to SCCM 2012 R2 and now when I go to the reports I get this message. Has anyone come across this?
The
DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an
error: The encryption type requested is not supported by the KDC.
(rsRuntimeErrorInExpression)

I found the solution.
http://www.netdavidic.com/2013/11/how-to-fix-sccm-2012-r2-reporting.html#!/2013/11/how-to-fix-sccm-2012-r2-reporting.html

How to Block Account member in input reporting for some users?

Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
I hope understand the question, im sorry about my english
thank you in advance
Ignacio Vazquez

I would think you could do one of the following:
Either set account as a secured dimension. You would then define security profiles for all account groups and assign those to your users / teams as appropriate. Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
Setup different input templates that only showed the accounts you wanted each group of users to see. Put the templates in different site folders and assign access to those sites as required. users would then only have access to open the template applicable to them. Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts. I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc. You then distribute the passwords to the users as appropriate.
Hope that helps.

BI 7.0 version report for anonymous user

Dear Gurus,
Greetings for the day!
I want to display the BEX BI 7.0 version report on Portal 7.0 for anonymous user. But I am not able to do the same. Can somebody please help me to achieve my task. Thanks.
Regards,
P.Swarna

HI,
Thanks for your reply,
Its already configured and the reports working perfectly with login user ids( like end user).But when we assign same report
to anonymous user with authentication scheme = anonymous in iview properties still its redirecting to logon page.
Please suggest how to configure BI 7.0 report for anonymous users.
Regards,
P.Swarna

Usage Report for 2007-04-08

We never received a usage report for the week of 2007-04-08. I checked our site preferences and the email address was not been changed. Did this report not get sent out or did we (odu.edu) just not receive it?

Sorry for the delay, but we have identified the issue with this week's report and have began sending them out to site admins this afternoon. Please check your inbox in an hour or so.
Mac OS X (10.4.6)

How to set different default interactive reports for different user groups?

I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
Thanks

You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

AD SSO not happening for Remote Users

Dear Members
I am having an issue with the NAC Deployment for Remote users (Users behind WAN Router)
Windows AD SSO (2008) is happening for LAN users successfullly, however remote users
are not able to do AD SSO.
it is ensured that remote users even in unauthenticated state can reach Active directory. there is no filtering
on any of the device across the path, for this communication.
When i use Kerbtray on the remote PC, i found no tickets at all.(i am logged in thru Domain)
what could be going wrong, is it delay (as they are wan user) which might attribute this issue, and if so, where are the needed parameters that can be tuned for AD SSO to happen.
Any help will ne highly appreciated.
thanks
Ahad

Hi Ahad,
As long as ALL the policies in Table 8-1 are configured for the Unauthenticated Role
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1174219
the CAS should be out of the picture for what concerns the communication between the PC and Kerberos.
If the Kerbtray.exe output for a failing user is empty, it means that the unsuccessful users do not have any Service Ticket (ST) at all.
This points to an issue with AD (considering the fact that the CAS is already allowing all the traffic to/from AD).
The failing users are either unable to send the Ticket-Granting Ticket (TGT) to AD, or they are unable to obtain the Service Ticket (ST) from AD.
The CAS during this phase is neither performing any actions nor blocking any traffic, since all the communications to/from AD are already fully open in the unauthenticated role.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

How to create accounts for remote users in 1841

Hi,
I was wondering how can i create accounts for remote users to be able to vpn please ? I have setup the vpn server successfully.
Regard,

Hello.
I believe that you can try this:
Router# configure terminal
Router (config)# password encryption aes
Router (config)# crypto ipsec client ezvpn ezvpn1
Router (config-crypto-ezvpn)# username server_1 password 0 blue
if you are using easy vpn.
from: http://cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b7d.html

SimpleSearch can only retrieve documents(reports) for enterprise users!!

Good Day Everybody,
i'm using SimpleSearch to retrieve all reports for specific users, the problem is that i'm only able to retirve reports for enterprise users and i can not get reports for domain users, anybody knows why?? or there is another way to do so??
GetDocumentList is working fine but it's only retirves reports for the loged in user only....
also i would like to extacrt all useres which has permession to reports, so would you please give me a hand of help and send me how to do!!!
kindly find below the code i'm using to retrieve all reports for specific users:
//After creating connection, seesion and login using administrator enterprise user
        SimpleSearch mySearch = new SimpleSearch();
        mySearch.InAuthor = txtUsername.Text;//.Trim();
        //mySearch.InName = "";
        mySearch.BeginDate = System.DateTime.Now.AddYears(-2);
        mySearch.BeginDateSpecified = true;
        mySearch.ObjectType = "documents";// "documents";
        BusinessObjects.DSWS.BICatalog.SortType[] mySort = new BusinessObjects.DSWS.BICatalog.SortType[1];
        mySort[0] = BusinessObjects.DSWS.BICatalog.SortType.NAMEASC;
        BICatalogObject[] searchResults= null ;
        searchResults = boCatalog.Search(mySearch, mySort, null, null, InstanceRetrievalType.WITHOUTINSTANCE);
        if (searchResults != null)
            foreach (BICatalogObject myBOCatObject in searchResults)
                Response.Write(myBOCatObject.Name + "----" + myBOCatObject.UID + "" + myBOCatObject.CreationDate + "--" +"<BR>");
        else
            Response.Write("no documents");

Which version are you using?
BICatalog is pretty limited, and has been deprecated for more recent versions.
Sincerely,
Ted Ueda

SQL Connection Failed for SCCM 2012 R2 (Unable to load user-specified certificate)

We've recently completed an upgrade from SCCM 2012 SP1 to 2012 R2 and have been running in the new environment for about a week. As of this morning, The consoles failed to connect to the CAS' and one of the Primary Site's database. The issue was resolved
easily enough by addressing a certificate issue in SQL, but I'm left wondering if there's a correlation between the SP1-to-R2 upgrade that would cause the cert to fail. Anyone have experience with this?
2014-01-21 22:10:11.81 Server      The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2014-01-21 22:10:11.81 Server      Error: 26014, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      Unable to load user-specified certificate [Cert Hash(sha1) "haaaaassssshhhh"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See
"Configuring Certificate for Use by SSL" in Books Online.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17826, Severity: 18, State: 3.
2014-01-21 22:10:11.81 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-01-21 22:10:11.81 Server      Error: 17120, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

We got the same certificate related error events after a fresh install of SCCM 2012 R2 on a new server. It happened during the first reboot after SCCM was installed. In the Certificates mmc, I right-clicked on the certificate used by SQL and chose Manage
Private Keys. Giving the service account that runs the MSSQLSERVER service read rights to the private key allowed SQL to start. However, after a day or so we rebooted the server again, and SQL wouldn't start. Something had removed the service account's read
permission. Since the SCCM configuration wasn't that far along, we uninstalled SCCM. After giving the service account read rights again, and rebooting several times over a few days, and SQL started every time. We then installed SCCM 2012 R2 again, and checked
the certificate's permissions before rebooting. The service account still had read permissions when the install completed, but as soon as the server was rebooted, it lost the permissions again.
The Certificates mmc was then used to request a second computer certificate and then SQL was configured to use that new certificate via SQL Server Configuration Manager. After several days and a number of reboots the SQL services have started normally every
time so the second certificate seems to have fixed the issue. I have kept the original certificate for fear that removing it will cause whatever part of SCCM 2012 R2 that modifies the original certificate to start removing permissions from the new certificate
as well.

Any major changes to the database for SCCM 2012 and Reporting?

I'm in the process of migrating my custom reports from SCCM 2007 to SCCM 2012. I wonder if all the tables / views in SCCM 2007 are the same in SCCM 2012 for my reporting purposes? So far everything I've migrated over appears to work without a problem.
Orange County District Attorney

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
The SQL schema for SCCM 2012 has been released here.
https://technet.microsoft.com/en-us/library/dn581978.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 usage report for remote users

Similar Messages

Maybe you are looking for