SCCM 2012: USMT Failing

I am still new to SCCM, and we have 2012 SP1 environment. While attempting to deploy a new device, I ran a Capture Only task sequence (TS) on the old device after setting up a side-by-side association. The current progress in ConfigMgr shows as "in
progress".
Next, on the newly imaged device, I added it to at RestoreOnly TS and kicked it off, but it fails with a generic error 0x00004005 after installing. This seems like a rather generic error. This is also my first time using this feature, so I do not know the
last time it was working.
This error has popped up on a second device when attempting to perform the capture only TS. I am attempting to find a way to troubleshoot this but can't find the applicable status message query. So, I suppose my question is has anyone come across this error
before? Can someone point ime n the right direction to troubleshoot this?

Hi,
Is there any relevant error in loadstate.log on the client?
It records details about the User State Migration Tool (USMT) and restoring user state data.
Also, I recommend you check the permission of the resource folder when you are ready to run restore TS.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Sccm 2012 DP failed to create iis virtual directories

I am trying to install a branch server as Sccm 2012 DP.
I already installed around 15 branch servers without any problems.
The problem I have is that the branch server failed to create iis virtual directories.
In my console under Monitoring, component status It writes that Distribution Manager successfully installed iis component of operating system to distribution point ""
Next it writes error to send packages to that branch server.
The site server distmgr.log shows the error below:
Failed to start primary service wdsserver
Microsoft Sql Server Native Client 11.0 login failed for user "xxx"
Failed to connect to the sql server connection type : SMS ACCESS
for Display = \\myserver\mswnet: sms_site= XXX failed to get master SCF.
Currently site xxx is initializing site control data. Cant get Master SCF from database at this time. will try later.
DPConnection;;;; ConnectWMI() failed to connect to branch server.
I try to remove the dp role, leave it for 12 hours reboot the server and assign the role again but same problem.
Any idea ?
Nikkoscy

Hi,
Have you installed all features required?
Technet prerequisite list for site system roles:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Upgrade to SCCM 2012 R2 Failed - Can I Simply Move SCCM Database to Replacement SCCM 2012 R2 System?

I started with SCCM 2012 RTM and attempted an upgrade to SCCM 2012 R2. The upgrade failed and left the the system unusable. I was able to recover the entire system (single server) from backup.
Rather than risk another failed upgrade can I simply build a new server and move the existing SCCM database to a new SCCM 2012 R2 system?

Hi,
Here is an official article talks about Upgrade for your reference.
Planning to Upgrade System Center 2012 Configuration Manager
http://technet.microsoft.com/en-us/library/jj822981.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 SP1 fails to install OSD of Captured Image

I installed Windows Server 2012, Visual Studio Pro 2008, 2010, 2012 and SQL Server 2012 onto a machine. Configured the settings on Windows Server 2012 and SQL 2012 to how the Developers requested to be configured. Ran the Capture Media from SCCM 2012 SP1,
saved to the designated network share. Capture was successful.
I create a TS to deploy the image to the other Dev Servers but it reboots to say no valid operating system found. I checked Monitoring for the Deployment I see the Task sequence but has the following error: Device - Unknown, MessageID - 11170, Description
- The task sequence manager could not successfully complete execution of the task sequence.
I see in the Apply Operation System from a captured image shows 1-1, 2-2, or 3-3. Does it matter which one I select and if so what does the numbers mean?
Any help is greatly appreciated, thanks!!

Hi Blacksuit,
Those numbers of the captured image stand for the indexes that are part of your WIM. And yes, it does matter which one you select. In the ConfigMgr console, go to your Software Library > Operating Systems > Operating System Images and select
the image you imported into ConfigMgr. Then at the bottom, click the Details tab to display your indexes. The index that contains your OS will have an OS Version and a description. The other indexes will be data images and not contain any
information in the Details tab. You'll need to choose the index (number) that contains the OS for the Apply OS step. To apply the data image indexes, use the Apply Data Image task sequence step and specify the partitions to apply the images
too before the Apply OS step.
Good luck!
-Matt

SCCM 2012 OSD Fails After Formatting and Partitioning Disks

Hello,
The problem is that when I deploy the task sequence to a computer, it loads to WindowsPE properly, then continues to formatting the hard disk and partitioning. After it has finished partitioning it then goes to the applying
the operating system portion of the task sequence. Finally it errors out with "...Image has failed with the error code (0x80070002)...". What is left on the WinPE is two log files in the SMSTSLog directory, smsts.log and wpeinit.log. Neither of these
seemed to show anything blatantly obvious to me, but I'm sure there is still some funny things happening.
This is my first time posting to a help forum of any kind so any constructive criticism is very welcome! Thanks for helping in advance, since SCCM has probably been the most challenging software I have had to setup. I
definitely need the help.
Apparently I can't just throw in all of my logs at once, so I shortened the smsts.log and removed the wpeinit.log. So just say if you need them I guess.

It's probably your network access sccount!<o:p></o:p>
"To configure the Network Access Account, open the CM2012 R2 console, click on Administration,
expand Overview, expand Site Configuration,
click Sites, on the top ribbon click Configure
Site Components, click Software Distribution.<o:p></o:p>
Click on the tab Network Access Account,
choose Specify the account that accesses network locations (by default the option is set to Use
the computer account of Configuration Manager client). Click on the orange icon and add the user account that enough permissions to access the content which is required
while deploying Operating System."<o:p></o:p>
This account should have the minimum appropriate permissions on operating system deployment content it needs to access. This account
is important because the computer receiving the operating system does not have a security context it can use to access content on the network.<o:p></o:p>

Sccm 2012, wsus, failed to publish client

Hi
ok, we had some issues with the offline imaging injecting updates into the images after looking at some posts on here I decided to uninstall wsus take the role off the server it was on then reinstall again. we have also updated to R2 the CU1, knock on effect
from this is the client isn't being published see log below., my question is how do I get the clients matched up?
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014
07:35:38 4012 (0x0FAC)
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Failed to publish client with error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Regards
Dave

To fix this issue, check solution of "El_Tex_de_Person" in below link
http://social.technet.microsoft.com/Forums/systemcenter/en-US/054075d6-6898-4a71-b152-52cb272a393c/client-will-not-publish-through-sup?forum=configmgrsetup
Also check below linkhttp://www.faqshop.com/wp/configmgr/cm12/cm12trobshoot/cm12clients/error-failed-to-publish-sms-client-to-wsus-error-0x80131622
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Upgrade to SCCM 2012 R2 Fails by ADD SQL ACCOUNT

Hello,
im Testing Today the Upgrade to R2.
in Step to Upgrade the Database I become an Error xxx\Compuertname not found to add SQL Account
My Server name is xxx.de\computername an not xxx\computername (netbiosname with dot and same with DNS Name) .
Have anywhere an Idea as Workaround for me ?

Microsoft support were no help...
I found a couple work arounds:
Move the database to the site server, do the upgrade, move the database back to the database server
Hack the DB:
create a login with a valid user account on the master DB on the SQL server
stop the sql server
Start SQL in single server mode
From an elevated cmd (Run as administrator), access the right folder where sqlservr.exe executable is located and execute below commands. Normally you will find it at “C:\Program Files\Microsoft SQL Server\MSSQL[InstanceName]\MSSQL\Binn”
C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn>sqlservr.exe -m
start SSMS in DAC mode: start SSMS, cancel the connection to the server,click on the
Database Engine Query icon (to the right of the new query button),and put admin: in front of the server name
run the following:
select @@servername
GO
use master
GO
sp_configure 'allow updates', 1
GO
reconfigure with override
GO
then do this:
update
master.sys.server_principals
set master.sys.server_principals.name
= 'domain\servername$'
where master.sys.server_principals.name
= 'domain.com\dummyaccount'
restart the sql server
upgrade SCCM
keep in mind i am currently testing this solution to make sure it doesn't cause issues

SCCM 2012: USMT Encrypted Files unavailable options

This is perhaps a difficult question,
As you know Configuration manager has a checkbox for choice in its GUI called “Skip files that use the Encrypting File System (EFS). This forces only one of 2 options:
Checked /efs:skip
Unchecked /efs:copyraw
Question is. Is there anyway to get scanstate to use either /efs:abort or /efs:decryptcopy?
When I use osdmigrateadditionalcaptureoptions, the setting gets overwritten.
Kindest regards.
/Andrew
Blog: http://scriptimus.wordpress.com

The TS is running under System context. I donot think the other two options could work.
Maybe you could utilize Run Command Line task to run the scanstate command and append the options.
You need to specify an account that has permission on the encrypted files.
Juke Chou
TechNet Community Support

SCCM WSUS Synchronization fails with error 0x80131904

With no reason the software update point in SCCM 2012 CU3 fails to synchronize update from the local installed WSUS service. I have checked the WSUS Sync manager log and what I have got is in the image below. I have tried to uninstall and the WSUS service
and reinstalled it but no success. I have also used the clean up option from the WSUS console and no success yet.
From the log below I am quite sure that if I can force the removal or clean up those updates that are failing to get saved the SCCM Update point synchronization might be able to fully synchronize. I hope someone can help me out. Thanks in advance.
Event view error - 2148734208
Wsyncmgr.log

I need WCM.log for investigation. Please upload this file to Skydrive and post the link here.
Juke Chou
TechNet Community Support

SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Issue upon upgrading SCCM 2012 rto R2 | Prerequisites failed

Hi,
I'm having this issue upon upgrading our current SCCM 2012 server SP1 to R2. When I reach the prerequisite checker, it fails to detect the User State Migration Tool (USMT) installed, Windows Deployment Tools installed and Windows Preinstallation Environment
installed. I'm guessing that this is because I have the WAIK for Windows 8 and not the WAIK for Windows 8.1. So I followed the instructions from the prerequisite checker and downloaded the latest version of WAIK. When I installed the WAIK for Windows 8.1,
it prompted me that it can't be installed because WAIK for 8.1 is already installed which is kinda weird. So I tried uninstalling WAIK from the server, but I came to this error. ( see image below)
Does anyone know how to get around this problem? This is becoming a showstopper for my upgrade.

When I open the error log, here is what I saw:
I have tried to use an Enterprise account to try to uninstall the WAIK but still it failed.
I followed the workaround provided in the link you sent and I was able to uninstall WAIK. I disjoined the server to AD and uninstalled WAIK. Maybe there is a GPO policy that is blocking the uninstallation.
Thank you very much for your assistance.

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip

we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
Find below the smsts.log file
Main error in the log file is
No physical network adapters found   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151.   TSMBootstrap   2/12/2014 1:05:41 PM   1984 (0x07C0)
Xtract from LOG
SMSTSRebootDelay=60   Reboot   2/12/2014 1:01:56 AM   3496 (0x0DA8)
SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue.   Reboot   2/12/2014 1:01:56 AM   3496 (0x0DA8)
SMSTSRebootRequested=WinPE   Reboot   2/12/2014 1:01:56 AM   3496 (0x0DA8)
Process completed with exit code 0   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
!--------------------------------------------------------------------------------------------!   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
Successfully completed the action (Restart to Windows PE) with the exit win32 code 0   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
Set authenticator in transport   TSManager   2/12/2014 1:01:56 AM   1876 (0x0754)
Set a global environment variable _SMSTSLastActionRetCode=0   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a global environment variable _SMSTSLastActionSucceeded=true   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Clear local default environment   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Updated security on object E:\_SMSTaskSequence.   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Save the current environment block   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Executing command line: "bcdedit.exe"   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
CreateProcess failed. Code(0x80070002)   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Command line execution failed (80070002)   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
Staging boot image UNB0003A   TSManager   2/12/2014 1:01:57 AM   1876 (0x0754)
ResolveSource flags: 0x00000000   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
SMSTSPersistContent: . The content for package UNB0003A will be persisted   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
Set authenticator in transport   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
WinHttp credentials set   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
List of files to be downloaded   TSManager   2/12/2014 1:01:59 AM   1876 (0x0754)
Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim    TSManager   2/12/2014 1:02:22 AM   1876
(0x0754)
VerifyContentHash: Hash algorithm is 32780   TSManager   2/12/2014 1:02:22 AM   1876 (0x0754)
Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim   TSManager   2/12/2014 1:02:25 AM   1876 (0x0754)
Copying boot image locally...   TSManager   2/12/2014 1:02:25 AM   1876 (0x0754)
Failed to find ADK installation root registry key   TSManager   2/12/2014 1:02:32 AM   1876 (0x0754)
Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim   TSManager   2/12/2014 1:02:32 AM   1876 (0x0754)
Applying image 1 to volume E:\_SMSTaskSequence\WinPE   TSManager   2/12/2014 1:02:32 AM   1876 (0x0754)
Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
Capturing WinPE bootstrap settings   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   TSManager   2/12/2014 1:02:35 AM   1876 (0x0754)
==============================[ OSDNetSettings.exe ]===========================   OSDNetSettings   2/12/2014 1:02:36 AM   2064 (0x0810)
Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   OSDNetSettings   2/12/2014 1:02:36 AM   2064 (0x0810)
No adapters found with non-empty DNSDomainSuffixSearchOrder   OSDNetSettings   2/12/2014 1:02:36 AM   2064 (0x0810)
Adapter "ROOT\SYMC_TEEFER2MP\0000" not found   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
No physical network adapters found   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
OSDNetSettings finished: 0x00000000   OSDNetSettings   2/12/2014 1:02:38 AM   2064 (0x0810)
Process completed with exit code 0   TSManager   2/12/2014 1:02:38 AM   1876 (0x0754)
Installing boot image to hard drive   TSManager   2/12/2014 1:02:38 AM   1876 (0x0754)
Backing up existing boot system before trying to set up new boot system   TSManager   2/12/2014 1:02:38 AM   1876 (0x0754)
BootLoader::backup: C:\, E:\_SMSTaskSequence\backup   TSManager   2/12/2014 1:02:39 AM   1876 (0x0754)
BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\   TSManager   2/12/2014 1:02:43 AM   1876 (0x0754)
Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD   TSManager   2/12/2014 1:02:43 AM   1876 (0x0754)
Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR   TSManager   2/12/2014 1:02:45 AM   1876 (0x0754)
Process completed with exit code 0   TSManager   2/12/2014 1:02:46 AM   1876 (0x0754)
Updated security on object E:\_SMSTaskSequence.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Save the current environment block   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Updated security on object E:\_SMSTaskSequence.   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSNextInstructionPointer=59   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a global environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Save the current environment block   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
Expand a string: %_SMSTSMDataPath%\Logs   TSManager   2/12/2014 1:02:47 AM   1876 (0x0754)
<![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">
   1/1/1601 12:00:00 AM   1995266923 (0x76ED5B6B)
==============================[ TSBootShell.exe ]==============================   TSBootShell   2/12/2014 1:04:01 AM   784 (0x0310)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'   TSBootShell   2/12/2014 1:04:01 AM   784 (0x0310)
Debug shell is enabled   TSBootShell   2/12/2014 1:04:01 AM   784 (0x0310)
Waiting for PNP initialization...   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Booted from fixed disk   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Found config path E:\_SMSTaskSequence   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Restoring boot system from E:\_SMSTaskSequence\backup   TSBootShell   2/12/2014 1:04:01 AM   796 (0x031C)
Successfully loaded the BCD boot system   TSBootShell   2/12/2014 1:04:05 AM   796 (0x031C)
Successfully loaded an exported NTLDR boot system   TSBootShell   2/12/2014 1:04:05 AM   796 (0x031C)
BootLoader::restore: E:\_SMSTaskSequence\backup, C:\   TSBootShell   2/12/2014 1:04:05 AM   796 (0x031C)
Successfully merged logs from cache.   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Loading bootstrap settings from E:\_SMSTaskSequence\WinPE   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Loading saved WinPE settings   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00'   TSBootShell
2/12/2014 1:04:06 AM   796 (0x031C)
Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Configuring WinPE bootstrap settings   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Creating WinPE answer file   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Setting hive location to "X:\windows\system32"   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Getting namespace "Microsoft-Windows-Setup" for architecture "x86"   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Configuring global network settings   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Join type:    TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
DNS domain: exch1.mas.unb.com   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
DNS domain search order:    TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
IP filter sec enabled: false   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
No adapters found in environment. Performing global configuration only.   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
Executing command line: wpeinit.exe -winpe   TSBootShell   2/12/2014 1:04:06 AM   796 (0x031C)
The command completed successfully.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Starting DNS client service.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Finalizing network settings   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
No adapters found in environment. Performing global finalization only.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Finalizing global network settings   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
DNS domain: exch1.mas.unb.com   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
DNS domain search order:    TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
DNS for WINS enabled: false   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
LMHosts file enabled: true   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Host lookup file:    TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
WINS scope ID:    TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
The command completed successfully.   TSBootShell   2/12/2014 1:05:40 AM   796 (0x031C)
==============================[ TSMBootStrap.exe ]==============================   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Failed to open PXE registry key. Not a PXE boot.   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Resuming Task Sequence in WinPE   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'   TSMBootstrap
2/12/2014 1:05:40 AM   1984 (0x07C0)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'   TSMBootstrap
2/12/2014 1:05:40 AM   1984 (0x07C0)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}   TSMBootstrap   2/12/2014 1:05:40 AM   1984 (0x07C0)
Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat".   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Updating the local data path in the Task Sequencing Environment.   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogMaxSize to 1000000   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogMaxHistory to 1   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogLevel to 0   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogEnabled to 1   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Setting LogDebug to 1   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Command line for extension .exe is "%1" %*   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE   TSMBootstrap   2/12/2014 1:05:41 AM   1984 (0x07C0)
==========[ TsProgressUI started in process 2004 ]==========   TsProgressUI   2/12/2014 1:05:41 AM   2008 (0x07D8)
Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
In dire need of help,
I have already gone through the below articles on the NET
http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
Awating response,
Hasan Reza

Well Finally I sorted my issue ,
Just want to share the solution, may be it would be helpful to some one else and save some times
The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
Thanks,
Hasan Reza.
http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen

SCCM 2012 SP1 - Offline Servicing failure - Failed to find or access the update binaries to be applied on the image

Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:52:49        8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite'        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49        8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
UnMounting Image (Commit Changes = 0) ...        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:53:31        8272 (0x2050)
Completed processing image package PackageID. Status = Failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Updated history for image package PackageID in the database        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Schedule processing failed        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
Processing completed for Schedule with ID 16777237        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:04        8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0        SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04        8272 (0x2050)
Schedule processing thread stopped        SMS_OFFLINE_SERVICING_MANAGER        14/06/2014 14:54:05        8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.

Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu

SCCM 2012 - Project 2010 Standard deployment failed with error 1603

Hi everyone,
I’m in the progress to roll out a software deployment via SCCM 2012, it’s to remove the current Project 2010 Professional we installed and reinstall the Standard version. We got a task sequence for the job, which is Reboot>Un-install Project 2010 Pro>Reboot>Install
Project 2010 Std.
The Un-installation process uses this command: setup.exe /uninstall PrjPro /config "PrjPro.WW\uninstall.xml"
The Installation process uses this command: setup.exe /adminfile project_silent_install.MSP
But the deployment result is quite random, some of the PCs would succeed without any issue, some of them with fail at the installation process with 1708/1603 error. As far as I know we use standard Win 7 64bits SOE across the environment, so everyone should
have same system baseline.
I reviewed some of the failed Project 2010 Standard installation logs as it shows the following:
Executing chained package: PrjStdWW
05/09/2014 20:16:14 Installing chained package: PrjStdWW
PERF: TickCount=530512 Name=Verify MSI local install source Description=Begin function
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
LIS: wait for package "{90140000-003A-0000-0000-0000000FF1CE}" to complete caching
LIS: package "{90140000-003A-0000-0000-0000000FF1CE}" caching completed
PERF: TickCount=530528 Name=Completed verify local install source Description=End function
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Use Shell UI transform : LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
Current transform is at path: LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
Using transform at path: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST
Catalyst Package Install...
Package: PrjStdWW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
Command Line: PATCH="\\SCCM2012\SMSPKGE$\PC100139\project_silent_install.MSP" ADDLOCAL=C.35347883.0E64.45B4.88A0.1881DE05E259,OSpp_Core,Project_PIA,SetupExeArpEntry,Office10Fix1,ProductFiles,InternationalSupportFiles_JPN,AceFiles,IMNFiles,OfficeIntlRDC,AceOdbc,OArt_DocTheme,OSetupController,WISPFiles,TCDRegistration,SetLanguageFiles,TCWorks7Files,ClviewFiles,VBAFiles,OfficeAppSupport,TextConverters,ProductNonBootFiles,dummy_Office_PIA,CAGOffice10,VSCommonPIAHidden,WebDiscussFiles,CAGCat10,CAGCat10Clips,MsoInstalledPackagesScoped,WxpFiles,SetupControllerFiles,Forms_PIA,dummy_MSCOMCTL_PIA,AlwaysInstalled,Gimme_OnDemandData,AceRepl,OISFiles,OfficeOLESupport,OfficeMSProof6,CAGFiles,InternationalSupportFiles_ArialUni,OSpp,Ace_PIA,GraphicsFiltersFile,WebDriveFiles,PROJECTFiles,ProductFiles_B2TR,SetupXmlFiles,OfficePostBoot,DocumentImagingUtils,VSTOCLR35,CAGCategoryFiles,ProjectCommon,VSTO,ProofingParent,MsoCommonShellHandler,OfficeDigitalSFiles,CARegistryFeature,OfficeCoreRDC,SetupExeAddRegistry,NonC2R_ProductFiles,MSSOAP3,TranslationCore,CAGOffice10Clips REMOVE=WISPHidden ARPENTRY_NOMODIFY="#0" ARPENTRY_MODIFYPATH="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /modify PRJSTD /dll OSETUP.DLL" INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SLD_OEMPIDKEY="0" ARPENTRY_NOELEVATEONMODIFY="#0" SETUP_REBOOT="never" COMPANYNAME=" " ARPENTRY_SKUCOMPONENTS="[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Proofing.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Project.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office64.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\PRJSTD\setup.xml[~]" ARPENTRY_HELPLINK="" ARPENTRY_DISPLAYICON="C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\OSETUP.DLL,1" ARPENTRY_DISPLAYNAME="Microsoft Project Standard 2010" ACCEPTEDEULA="1" ARPENTRY_DISPLAYVERSION="14.0.4763.1000" BRANDING_XML="C:\Windows\TEMP\Setup00001048\BRANDING.XML" SLD_SUPPORTSBYPASS="0" SLD_ACID="5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE" SLD_TRIALTYPE="0" ARPENTRY_PACKAGEREFS="[~]OfficeMUISet.en-us[~]OfficeMUI.en-us[~]Proofing.en-us[~]Proof.en-us[~]Proof.es-es[~]Office64MUISet.en-us[~]PrjStdWW[~]Office64WW[~]Office64MUI.en-us[~]ProjectMUI.en-us[~]Proof.fr-fr[~]" SLD_DPID="#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en-US" ARPENTRY_SHELLUITRANSFORMLANGUAGE="en-US" USERNAME=" " ARPENTRY_CONTACT="" ARPENTRY_HELPTELEPHONE="" ARPENTRY_PRODUCTCODES="[~]{90140000-00B4-0409-0000-0000000FF1CE}[~]{90140000-002C-0409-0000-0000000FF1CE}[~]{90140000-003A-0000-0000-0000000FF1CE}[~]{90140000-002A-0000-1000-0000000FF1CE}[~]{90140000-001F-0C0A-0000-0000000FF1CE}[~]{90140000-001F-0409-0000-0000000FF1CE}[~]{90140000-001F-040C-0000-0000000FF1CE}[~]{90140000-0115-0409-0000-0000000FF1CE}[~]{90140000-006E-0409-0000-0000000FF1CE}[~]{90140000-002A-0409-1000-0000000FF1CE}[~]{90140000-0116-0409-1000-0000000FF1CE}[~]" ARPENTRY_INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SETUPEXE_DOARPWRITE="1" ACIDS="11B39439-6B93-4642-9570-F2EB81BE2238;5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE;B6E9FAE1-1A0E-4C61-99D0-4AF068915378" ARPENTRY_SPPSKUID="[~]5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE[~]" ARPENTRY_NOREMOVE="#0" SLD_PKU="0" SLD_PID="82503-001-0000106-49615" LICTYPE="ltKMS" ARPENTRY_UNINSTALLSTRING="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /uninstall PRJSTD /dll OSETUP.DLL" ARPENTRY_NOREPAIR="#1" ARPENTRY_URLUPDATEINFO="" ARPENTRY_URLINFOABOUT="" REMOVEPREVIOUS="" ARPENTRY_CACHELOCATION="C:\MSOCache\All Users" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\" ARPSYSTEMCOMPONENT=1 TRANSFORMS="C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST" ALLUSERS="1"
PERF: TickCount=530543 Name=MsiPackage::Install Description=Calling OMsiInstaller::InstallProduct for package file "C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Error: Failed to install product: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi ErrorCode: 1603(0x643).
Log level changed from: Standard to: Verbose
Rolling back chain
05/09/2014 20:18:47 Rolling back package: PrjStdWW
There appears to be no rollback work to do for package: PrjStdWW path: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
05/09/2014 20:18:47 Rolling back package: Office64WW
Package Office64WW was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64WW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\Office64WW.msi
Command Line: ADDLOCAL=AcePiaReg64,VSTO64,WordXmlEditVerb64,ExcelXmlEditVerb64,GrooveShellIntegration64,Project64Files,OSpp64_Core,ExcelPiaReg64,GraphPiaReg64,FormsPiaReg64,SmartTagPiaReg64,PPTXmlEditVerb64,MsoInstalledPackagesScoped,OfficeExample64bitFilesA,WAC_XmlEditVerb64SPD,SetupXmlFiles,WordPiaReg64,Outlook64Files,AlwaysInstalled64,VBEPiaReg64,VisioPiaReg64,Outlook64SearchShellReg,OneNote64Files,SetupControllerFiles,ProjectPiaReg64,SearchFilters64Files,OutlookPiaReg64,Gimme_OnDemandData,Visio64ShapeSearch,WAC_PIARegSPD64,ProductNonBootFiles64,XDocsPiaReg64,PublisherPiaReg64,OneNotePIAReg64,ProductFiles64,OfficeExample64bitFilesB,OfficePiaReg64,Visio64Files,TCDRegistration64,OSpp64,XDOCSFiles64,XDocsXmlEditVerb64,MsoCommonShellHandler64bit,AccessPiaReg64,PowerPointPiaReg64 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64WW ProductCode:{90140000-002A-0000-1000-0000000FF1CE}
05/09/2014 20:18:56 Rolling back package: ProjectMUI.en-us
Package ProjectMUI.en-us was installed in the chain... uninstalling as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Install Rollback (uninstall)...
Package: ProjectMUI.en-us
Product Code: {90140000-00B4-0409-0000-0000000FF1CE}
Command Line: REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back install of package: ProjectMUI.en-us path:C:\MSOCache\All Users\{90140000-00B4-0409-0000-0000000FF1CE}-C\ProjectMUI.msi
05/09/2014 20:19:00 Rolling back package: Proofing.en-us
Package Proofing.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proofing.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proofing.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proofing.en-us ProductCode:{90140000-002C-0409-0000-0000000FF1CE}
05/09/2014 20:19:04 Rolling back package: Proof.en-us
Package Proof.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.en\Proof.msi
Command Line: ADDLOCAL=FindAllWordFormsFiles_1033,Gimme_OnDemandData,SpellingAndGrammarFiles_1033,ThesaurusFiles_1033,MsoInstalledPackagesScopedIntl_1033,HyphenationFiles_1033,OCR_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.en-us ProductCode:{90140000-001F-0409-0000-0000000FF1CE}
05/09/2014 20:19:05 Rolling back package: Proof.fr-fr
Package Proof.fr-fr was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.fr-fr
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.fr\Proof.msi
Command Line: ADDLOCAL=MsoInstalledPackagesScopedIntl_1036,Gimme_OnDemandData,SpellingAndGrammarFiles_1036,SetupControllerFiles,FindAllWordFormsFiles_1036,TranslationFiles_1036,ThesaurusFiles_1036,HyphenationFiles_1036,SetupXmlFiles,OCR_1036 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.fr-fr ProductCode:{90140000-001F-040C-0000-0000000FF1CE}
05/09/2014 20:19:11 Rolling back package: Proof.es-es
Package Proof.es-es was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.es-es
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.es\Proof.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SpellingAndGrammarFiles_3082,OCR_3082,FindAllWordFormsFiles_3082,HyphenationFiles_3082,ThesaurusFiles_3082,MsoInstalledPackagesScopedIntl_3082,SetupControllerFiles,SetupXmlFiles,TranslationFiles_3082 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.es-es ProductCode:{90140000-001F-0C0A-0000-0000000FF1CE}
05/09/2014 20:19:12 Rolling back package: Office64MUISet.en-us
Package Office64MUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUISet.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUISet.en-us ProductCode:{90140000-0116-0409-1000-0000000FF1CE}
05/09/2014 20:19:19 Rolling back package: Office64MUI.en-us
Package Office64MUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUI.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUI.msi
Command Line: ADDLOCAL=OfficeExample64bitFilesBIntl_1033,OfficeExample64bitFilesAIntl_1033,Gimme_OnDemandData,Outlook64SearchShellRegIntl_1033,ProductFilesIntl64_1033,MsoInstalledPackagesScopedIntl_1033,OneNoteToLinkedNotesIEAddin64Intl_1033,GrooveFiles64Intl_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUI.en-us ProductCode:{90140000-002A-0409-1000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUISet.en-us
Package OfficeMUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUISet.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUISet.en-us ProductCode:{90140000-0115-0409-0000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUI.en-us
Package OfficeMUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUI.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUI.msi
Command Line: ADDLOCAL=MetricConverterIntl_1033,AlwaysInstalledIntl_1033,MSTagPluginStockFilesIntl_1033,WebDiscussFilesIntl_1033,GraphicsFiltersPNGFilesIntl_1033,EquationEditorFilesIntl_1033,GraphicsFiltersEPSFilesIntl_1033,MSTagPluginNamesFilesIntl_1033,TCWP5FilesIntl_1033,CAGOffice10Intl_1033,OISFilesIntl_1033,WxpFilesIntl_1033,XDOCSEditorFilesIntl_1033,CAGFilesIntl_1033,WISPHiddenIntl_1033,CAGCat10Intl_1033,SetLanguageFilesIntl_1033,OSetupControllerIntl_1033,MsoInstalledPackagesScopedIntl_1033,TCRecoverFilesIntl_1033,SetupControllerFiles,ClviewFilesIntl_1033,GraphHelpFilesIntl_1033,ProductNonBootFilesIntl_1033,MSTagPluginPlacesFiles_1033,VisioPreviewerIntl_1033,ProductFilesIntl_1033,AceReplIntl_1033,GraphicsFiltersCGMFilesIntl_1033,GraphicsFiltersWPGFilesIntl_1033,Gimme_OnDemandData,TCWP6FilesIntl_1033,GraphicsFiltersGIFFilesIntl_1033,GRAPHFilesIntl_1033,MSTagPluginDateFilesIntl_1033,WebDriveFilesIntl_1033,LOBiFilesIntl_1033,LISTFilesIntl_1033,UICaptionsCompanionIntl_1033,SetupXmlFiles,AceFilesIntl_1033,TOOLSFilesIntl_1033,MSSOAP3Intl_1033,VBAHelpFilesIntl_1033,GraphicsFiltersPICTFilesIntl_1033,OfficeDigitalSFilesIntl_1033,VBAFilesIntl_1033,GraphicsFiltersJPEGFilesIntl_1033,QueryFilesIntl_1033,SetLanguageHelpFilesIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUI.en-us ProductCode:{90140000-006E-0409-0000-0000000FF1CE}
Error attaching to OSE, error 0x00000000
Stopping running ose
LIS: start uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
Error attaching to OSE, error 0x00000000
Stopping running ose
SystemRestore : Attempting to cancelling System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
SystemRestore : Successfully cancelled System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
Not showing completion dialog because it was not requested.
Catalyst execution finished: 05/09/2014 20:19:25. Return code: 1603.
PERF: TickCount=722128 Name=RunSetup Description=End function
Can onyone enlighten me what's went wrong, and why did I get this inconsitent installation behaviour?
Thank you very much!!!

1603 means there is a fatal error during installation process.
Take a look at the article below. It may help on finding cause.
Hi Juke,
I did do fair a bit of Googling before I started the post. I have increased the logging level on one of the machines failed on the installation. Apparently Project installation log doesn't throw the "return value 3", I think it's pointing to a particular
updating item, anyone knows what is it?
Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed.
The following is the detailed installation log.
MSI (s) (8C:B4) [20:31:33:122]: Executing op: SetTargetFolder()
MSI (s) (8C:B4) [20:31:33:122]: Executing op: FontRegister(Title=Arial Unicode MS (TrueType),File=ARIALUNI.TTF)
MSI (s) (8C:B4) [20:31:33:122]: SHELL32::SHGetFolderPath returned: C:\WINDOWS\Fonts
MSI (s) (8C:B4) [20:31:33:122]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)
MSI (s) (8C:B4) [20:31:33:122]: Error in rollback skipped. Return: 5
MSI (s) (8C:B4) [20:31:33:746]: Entering MsiProvideAssembly. AssemblyName: Policy.12.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:746]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:777]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:777]: Entering MsiProvideAssembly. AssemblyName: Policy.11.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:777]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:808]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:808]: Entering MsiProvideAssembly. AssemblyName: Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:808]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:840]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:840]: Note: 1: 2318 2:
MSI (s) (8C:B4) [20:31:33:840]: No System Restore sequence number for this installation.
MSI (s) (8C:B4) [20:31:33:840]: Unlocking Server
MSI (s) (8C:B4) [20:31:33:980]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Note: 1: 2262 2: InstallExecuteSequence 3: -2147287038
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed. Error code 1603. Additional information is available in the log file C:\WINDOWS\TEMP\MSI1f79e.LOG.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed an update. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Update Name: {35347883-0E64-45B4-88A0-1881DE05E259}. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Note: 1: 1708
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 -- Installation operation failed.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed the product. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: MainEngineThread is returning 1603
MSI (s) (8C:24) [20:31:34:011]: No System Restore sequence number for this installation.
MSI (s) (8C:24) [20:31:34:011]: User policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:24) [20:31:34:027]: Restoring environment variables
MSI (s) (8C:24) [20:31:34:027]: Destroying RemoteAPI object.
MSI (s) (8C:48) [20:31:34:027]: Custom Action Manager thread ending.
MSI (c) (F4:1C) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (F4:1C) [20:31:34:027]: MainEngineThread is returning 1603
=== Verbose logging stopped: 7/05/2014 20:31:34 ===

SCCM 2012: USMT Failing

Similar Messages

Maybe you are looking for