SCCM 2012 with MDT intergration OSD

Does anyone have some links or suggested study material with regards to SCCM 2012 with MDT integration. I am specifically looking for the OS deployment.
Most of the stuff I found only cover OSD with SCCM task sequences. Any assistance would be greatly appreciated.

If you download the MDT 2013 documentation from this link:
http://www.microsoft.com/en-us/download/details.aspx?id=40796
You will find two Word documents about integrating MDT 2013 with ConfigMgr 2012. They are called:
Quick Start Guide for System Center 2012 R2 Configuration Manager
Quick Start Guide for User Driven Installation
You could also have a look at this book:
http://www.amazon.com/Deployment-Fundamentals-Vol-Deploying-Configuration/dp/9197939021/ref=sr_1_4?s=books&ie=UTF8&qid=1400523728&sr=1-4&keywords=arwidmark
It is written for ConfigMgr 2007 and MDT 2010 but most of the steps in the book would be the same on ConfigMgr 2012 and MDT 2013.

Similar Messages

  • SCCM 2012 with MDT: osd, apply wim captured with CM task sequence in MDT task sequence: "cannot find the file specified"

    Hi,
    Please see titlte. When I try to apply an CM captured WIM via an MDT task sequence, it starts, applies but stops after 15 minutes.
    Logfile says it "cannot find the file specified".
    Full error: "Installation of image 3 in package mypackage failed to complete. . The system cannot find the file specified. (Error: 80070002, Source: Windows).
    Though the image IS there, redistributed it (if it wouldn't be there the task sequence would not start).
    Please advise.
    J
    Update: could it be the fact I'm using an old (SCCM 2012) MDT wim? If I need to recreate the WIM boot image, where do I get the SCCM 2012 R2 boot wims?
    Jan Hoedt

    See how to manually re-create your boot images
    http://myitforum.com/myitforumwp/2013/08/01/how-to-create-configmgr-2012-boot-images-from-scratch/
    http://www.niallbrady.com/2013/10/09/how-can-i-manually-add-winpe-5-boot-images-to-system-center-2012-configuration-manager-sp1-cu3/
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • SCCM 2012 with MDT integrated: dynamic logging to \\servername\share\failed\computername or ...\succesfull\computername

    Hi,
    I have this SCCM 2012 standard CM task sequence which writes its logs at the end of the task sequence to a folder. When succesfull to\\server\share\success\computername, when failed to \\server\share\failed\computername
    It then also sends a mail with location of logfiles.
    Please advise on dynamic logging within sccm 2012 R2: how do I configure this? In ini-file, I set the SLShareDynamicLogging to a servershare?
    J.
    Jan Hoedt

    It would be customsettings.ini in MDT and this is not available in native CM12 task sequences. Integrating MDT in CM12 would add that. You can set task sequence variables in CM12 though using computer variables, collection variables, task sequence steps
    or scripts during the task sequence.
    Torsten Meringer | http://www.mssccmfaq.de

  • SCCM 2012 R2 & MDT 2013 OSD Refresh - BDEDrive Assigned letter

    Hello,
    I'm having an issue with my MDT OSD refresh for Win 7 machines. I've capture a Win 7 reference image from a VM using MDT capture TS and I can successfully deploy that image to a bare metal VM
    using an MDT integrated SCCM TS. The disk partitions are expected, C:\ is the primary OS and BDEDrive is assigned 500MB and is hidden, no drive letter assigned.
    DISKPART> list volume
      Volume ###  Ltr  Label        Fs     Type        Size     Status    
    Info
      Volume 0     E                       DVD-ROM         0 B  No Media
      Volume 1         BDEDrive (P  NTFS   Partition    500 MB  Healthy
      Volume 2     C   OSDisk       NTFS   Partition     19 GB  Healthy    System
    DISKPART>
    However, when I run a refresh TS to re-deploy the same imaged used in my bare metal TS, the BDEDrive is assigned D:\ and is visible in windows explorer.
    DISKPART> list volume
      Volume ###  Ltr 
    Label        Fs    
    Type        Size    
    Status     Info
      Volume 0    
    E                      
    DVD-ROM         0 B 
    No Media
      Volume 1    
    D   BDEDrive (P  NTFS  
    Partition    500 MB  Healthy
      Volume 2    
    C   OSDisk      
    NTFS   Partition    
    19 GB  Healthy
    DISKPART>
    In the ‘Formart and Partition Disk 6.1’ step, I have checked the option ‘Do 
    not assign a drive letter this partition’ but it’s obviously not working as expected. Any suggestions?
    Thanks!

    Not sure if this is the same as what you are seeing, but check out this post: https://social.technet.microsoft.com/Forums/systemcenter/en-US/b3e2fc1f-e9df-4c6e-99a5-5d0e0dff648a/refresh-scenario-with-bitlocker-partition?forum=configmgrosd
    Jeff

  • OSD SCCM 2012 R2: MDT integrated task sequence central logging not working

    Hi,
    Please advise on making dynamic logging work for SCCM 2012 R2 MDT integrated tasks sequence.
    This is what I specified in customsettings.ini
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=YES
    SkipAdminPassword=NO
    SkipProductKey=YES
    ; Copy Logs if en error occurs or when deployment is successfully completed
    SLSHARE=\\sccmserver\OSD\Logs\MDT
    ; Enable Dynamig Logging
    SLSHAREDynamicLogging=\\\sccmserver\OSD\Logs\MDTDynLogs\%OSDComputername%
    UserID=administrator
    UserDomain=ourdomain
    UserPassword=ourpassword
    Jan Hoedt

    I keep on getting access denied though when I connect in a dosprompt with the credentials I can make a connection.
    Mapping server share: \\ourdomain.com\share    ZTIValidate    4/03/2014 0:08:14    0 (0x0000)
    <Message containing password has been suppressed>    ZTIValidate    4/03/2014 0:08:14    0 (0x0000)
    Access is denied.
        ZTIValidate    4/03/2014 0:08:14    0 (0x0000)
    Unable to connect to \\ourdomain.com\share.  Sleeping for 5 seconds.    ZTIValidate    4/03/2014 0:08:14    0 (0x0000)
    <Message containing password has been suppressed>    ZTIValidate    4/03/2014 0:08:19    0 (0x0000)
    Access is denied.
        ZTIValidate    4/03/2014 0:08:19    0 (0x0000)
    Unable to connect to \\ourdomain.com\share.  Sleeping for 10 seconds.    ZTIValidate    4/03/2014 0:08:19    0 (0x0000)
    <Message containing password has been suppressed>    ZTIValidate    4/03/2014 0:08:29    0 (0x0000)
    Access is denied.
        ZTIValidate    4/03/2014 0:08:29    0 (0x0000)
    Unable to connect to \\ourdomain.com\share.  Sleeping for 15 seconds.    ZTIValidate    4/03/2014 0:08:29    0 (0x0000)
    <Message containing password has been suppressed>    ZTIValidate    4/03/2014 0:08:44    0 (0x0000)
    Access is denied.
        ZTIValidate    4/03/2014 0:08:44    0 (0x0000)
    Unable to connect to \\ourdomain.com\share.  Sleeping for 20 seconds.    ZTIValidate    4/03/2014 0:08:44    0 (0x0000)
    <Message containing password has been suppressed>    ZTIValidate    4/03/2014 0:09:04    0 (0x0000)
    Access is denied.
        ZTIValidate    4/03/2014 0:09:05    0 (0x0000)
    Unable to connect to \\ourdomain.com\share.  Sleeping for 25 seconds.    ZTIValidate    4/03/2014 0:09:05    0 (0x0000)
    ERROR - Unable to map a network drive to \\ourdomain.com\share.    ZTIValidate    4/03/2014 0:09:30    0 (0x0000)
    An invalid SLShareDynamicLogging value of \\ourdomain.com\share\PackageSources\OSD\Logs\MDT-DynLogs\computername was specified.    ZTIValidate    4/03/2014 0:09:30    0 (0x0000)
    Jan Hoedt

  • SCCM 2012 R2 MDT 2013 Install Features after OS Install

    I have a question in regards to installing Features on Windows Servers Post OS Install/OSD.
    I have MDT 2013 integrated with SCCM 2012 R2. I have created a MDT TS doing the following:
    Microsoft Deployment Custom Task Sequence (All other ones were for OSD)
    I removed all the steps in the TS except for the "Use Toolkit Package"
    Added Several MDT Sequence for Install Roles and Features, Selected SNMP for Server 2008, 2008 R2, 2008 R2 Core, 2012, 2012 R2.
    Removed the boot image since it is not needed.
    Deployed to my Test Collection.
    I see the TS Running on the test servers but when I check Server Manager the SNMP is still not installed even though software center shows installed on the TS.
    Am I missing something here? Any help would greatly be appreciated. Thanks!!

    Disregard my previous post. I was tinkering with the Compliance Settings and corrected my ignorance.
    Here were my steps:
    Create Configuration Item
    General: Put the name, Set Type to Window, filter set to "Server"
    Supported Platforms: All servers 2008 and newer
    Settings: Name,
    Discovery Script -PowerShell
    $FeatureName = "SNMP-Service"
    If (Get-WindowsFeature | Where {$_.State -eq "Enabled" -and $_.FeatureName -eq $FeatureName})
        $Compliance = "Compliant"
    Else {
        $Compliance = "NonCompliant"
    Return $Compliance
    Remediation Script - PowerShell
    $FeatureName = "SNMP-Service"
    Import-Module ServerManager
    Install-WindowsFeature -Name $FeatureName -IncludeAllSubFeature
    Compliance Rule: Name, Rule Type = Value, Must Comply Equals Compliant, Checked Run remediation script when not compliant, set Reports to Information
    Created Config Baseline, Assigned Config Item for SNMP Service and then deployed to my Servers.

  • SCCM 2012 SP1 MDT task sequence fails on reboot does not retain ip

    we are having a sccm 2012 sp1 server that used for installation of win 8.1 Enterprise , the task sequence works perfectly fine but when we  run the same task on HP Elite 8300 system having Intel 82579LM Adapter from Windows XP , after the reboot the
    task fails as no ip address is assigned the NIC , We did download the WInPE Adapter drivers from HP site and injecting to the x86 Boot Image (6.2.9200) however the task still fails ,
    Our environment uses all static ip address , the same task as mentioned earlier has worked fine with Different brands of HP elite 8200/8100 , infact the elite 8200 also uses the same NIC card
    Find below the smsts.log file
    Main error in the log file is
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 169.254.181.151.    TSMBootstrap    2/12/2014 1:05:41 PM    1984 (0x07C0)
    Xtract from LOG
    SMSTSRebootDelay=60    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootMessage=A new Microsoft Windows operating system is being installed. The computer must restart to continue.    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    SMSTSRebootRequested=WinPE    Reboot    2/12/2014 1:01:56 AM    3496 (0x0DA8)
    Process completed with exit code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    !--------------------------------------------------------------------------------------------!    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Successfully completed the action (Restart to Windows PE) with the exit win32 code 0    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:56 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionRetCode=0    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSLastActionSucceeded=true    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Clear local default environment    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Executing command line: "bcdedit.exe"    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    CreateProcess failed. Code(0x80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Command line execution failed (80070002)    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    Staging boot image UNB0003A    TSManager    2/12/2014 1:01:57 AM    1876 (0x0754)
    ResolveSource flags: 0x00000000    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    SMSTSPersistContent: . The content for package UNB0003A will be persisted    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Set authenticator in transport    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    WinHttp credentials set    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    List of files to be downloaded    TSManager    2/12/2014 1:01:59 AM    1876 (0x0754)
    Downloaded file from http://unb-ho-sccmdb.exch1.mas.unb.com:80/SMS_DP_SMSPKG$/UNB0003A/sccm?/WinPE.UNB0003A.wim to E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim     TSManager    2/12/2014 1:02:22 AM    1876
    (0x0754)
    VerifyContentHash: Hash algorithm is 32780    TSManager    2/12/2014 1:02:22 AM    1876 (0x0754)
    Found boot image E:\_SMSTaskSequence\Packages\UNB0003A\WinPE.UNB0003A.wim    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Copying boot image locally...    TSManager    2/12/2014 1:02:25 AM    1876 (0x0754)
    Failed to find ADK installation root registry key    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Opening image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Applying image 1 to volume E:\_SMSTaskSequence\WinPE    TSManager    2/12/2014 1:02:32 AM    1876 (0x0754)
    Closing image file E:\_SMSTaskSequence\WinPE\sources\boot.wim    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Capturing WinPE bootstrap settings    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    Executing command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSManager    2/12/2014 1:02:35 AM    1876 (0x0754)
    ==============================[ OSDNetSettings.exe ]===========================    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Command line: "osdnetsettings.exe" capture adapters:true scope:Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    No adapters found with non-empty DNSDomainSuffixSearchOrder    OSDNetSettings    2/12/2014 1:02:36 AM    2064 (0x0810)
    Adapter "ROOT\SYMC_TEEFER2MP\0000" not found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    No physical network adapters found    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    OSDNetSettings finished: 0x00000000    OSDNetSettings    2/12/2014 1:02:38 AM    2064 (0x0810)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Installing boot image to hard drive    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    Backing up existing boot system before trying to set up new boot system    TSManager    2/12/2014 1:02:38 AM    1876 (0x0754)
    BootLoader::backup: C:\, E:\_SMSTaskSequence\backup    TSManager    2/12/2014 1:02:39 AM    1876 (0x0754)
    BootLoader::restore: E:\_SMSTaskSequence\WinPE, C:\    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Saving bcd store to E:\_SMSTaskSequence\WinPE\boot\BCD    TSManager    2/12/2014 1:02:43 AM    1876 (0x0754)
    Executing command line: "E:\_SMSTaskSequence\WinPE\SMS\bin\i386\bootsect.exe" /NT60 SYS /MBR    TSManager    2/12/2014 1:02:45 AM    1876 (0x0754)
    Process completed with exit code 0    TSManager    2/12/2014 1:02:46 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Updated security on object E:\_SMSTaskSequence.    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSNextInstructionPointer=59    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a global environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Set a TS execution environment variable _SMSTSInstructionStackString=0 41 57    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Save the current environment block    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    Expand a string: %_SMSTSMDataPath%\Logs    TSManager    2/12/2014 1:02:47 AM    1876 (0x0754)
    <![LOG[LOGGING: Finalize process ID set to 780]LOG]!><time="01:04:01.537+480" date="02-12-2014" component="TSBootShell" context="" type="1" thread="784" file="tslogging.cpp:1495">  
          1/1/1601 12:00:00 AM    1995266923 (0x76ED5B6B)
    ==============================[ TSBootShell.exe ]==============================    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Debug shell is enabled    TSBootShell    2/12/2014 1:04:01 AM    784 (0x0310)
    Waiting for PNP initialization...    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(3)\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    WinPE boot path: E:\_SMSTASKSEQUENCE\WINPE\SOURCES\BOOT.WIM    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Booted from fixed disk    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Found config path E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Restoring boot system from E:\_SMSTaskSequence\backup    TSBootShell    2/12/2014 1:04:01 AM    796 (0x031C)
    Successfully loaded the BCD boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully loaded an exported NTLDR boot system    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    BootLoader::restore: E:\_SMSTaskSequence\backup, C:\    TSBootShell    2/12/2014 1:04:05 AM    796 (0x031C)
    Successfully merged logs from cache.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,430)    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading bootstrap settings from E:\_SMSTaskSequence\WinPE    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Loading saved WinPE settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00450037004500350042004200360039002D0036003100390038002D0034003500350035002D0042003500430041002D003600430034003600410032004200350045004200370038007D00'    TSBootShell  
     2/12/2014 1:04:06 AM    796 (0x031C)
    Environment scope successfully created: Global\{E7E5BB69-6198-4555-B5CA-6C46A2B5EB78}    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring WinPE bootstrap settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Creating WinPE answer file    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Setting hive location to "X:\windows\system32"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Getting namespace "Microsoft-Windows-Setup" for architecture "x86"    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Configuring global network settings    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Join type:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    IP filter sec enabled: false    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    No adapters found in environment.  Performing global configuration only.    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Writing configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Successfully saved configuration information to E:\_SMSTaskSequence\WinPE\WinPeUnattend.xml    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    Executing command line: wpeinit.exe -winpe    TSBootShell    2/12/2014 1:04:06 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Starting DNS client service.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    No adapters found in environment.  Performing global finalization only.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Finalizing global network settings    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain: exch1.mas.unb.com    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS domain search order:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    DNS for WINS enabled: false    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    LMHosts file enabled: true    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Host lookup file:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    WINS scope ID:     TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    The command completed successfully.    TSBootShell    2/12/2014 1:05:40 AM    796 (0x031C)
    ==============================[ TSMBootStrap.exe ]==============================    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:E:\_SMSTaskSequence    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Failed to open PXE registry key. Not a PXE boot.    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Resuming Task Sequence in WinPE    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'    TSMBootstrap  
     2/12/2014 1:05:40 AM    1984 (0x07C0)
    Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}    TSMBootstrap    2/12/2014 1:05:40 AM    1984 (0x07C0)
    Loading the Task Sequencing Environment from "E:\_SMSTaskSequence\TSEnv.dat".    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Updating the local data path in the Task Sequencing Environment.    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxSize to 1000000    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogMaxHistory to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogLevel to 0    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogEnabled to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Setting LogDebug to 1    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Command line for extension .exe is "%1" %*    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Set command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    Executing command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:WinPE    TSMBootstrap    2/12/2014 1:05:41 AM    1984 (0x07C0)
    ==========[ TsProgressUI started in process 2004 ]==========    TsProgressUI    2/12/2014 1:05:41 AM    2008 (0x07D8)
    Command line: "X:\sms\bin\i386\TsProgressUI.exe" /Register:W
    In dire need of help,
    I have already gone through the below articles on the NET
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/0fe5cded-51cf-487a-97e3-837fb3426a3e/install-software-updates-in-osd-reboots-leaves-clients-in-provisioning-mode?forum=configmgrosd
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/c590e486-d3ca-423f-8953-e596160f3567/updates-hang-during-osd-kb2509007-not-working-for-me?forum=configmgrosd
    Awating response,
    Hasan Reza

    Well Finally I sorted my issue ,
    Just want to share the solution, may be it would be helpful to some one else and save some times
    The problem was that the Xp images has lot of hidden NIC installed , this would not allow the system to work with the correct NIC card and Ip address (System -> View Hidden Devices) , what I did 2 things
    1) Copied the OSD Script folder from the SCCM Server to the Client pc and ran that ztigather.wsf and captured the output , it was evident that it showed capturing multiple adapters , (There are some blogs that pointed out that OSD can capture only one nic
    due to the only one Adapter0 section being defined in the ZTIgather.xml file,)
    2) I open the registry at the xp pc navigated to HKLM-> System ->Current Control Set-> Services-> TCPIP -> Parameters-> Interfaces ->
    Expect for the NIC card that had the Ip address assigned I deleted all other nic card's guid,
    As then post running deleting the old scanstate (USMTUTIL /rd c:\statestore) , reran the task and VOILA..
    All worked fine , below are the two post I followed , though notvery relevant but they were helpful and help me reached the conclusion.
    Thanks,
    Hasan Reza.
    http://systemscenter.ru/mdt2012.en/ztigatherwsf.htm
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/8acb7cd1-7028-4ffe-86c9-eb43041cf8b3/how-do-i-get-rid-of-second-169254xx-ipv4-address-on-windows-server-2008-sp2-x86?forum=winservergen

  • SCCM 2012 with BranchCache in Microsoft Windowws Server 2012

    Hi  all
    Can anyone tell me about using BranchCache in Microsoft Windowws Server 2012 with SCCM 2012
    how much useful is this ,is it better then NOmad ,as this article suggest
    http://blogs.technet.com/b/brianlewis/archive/2012/11/14/branchcache-in-microsoft-windowws-server-2012.aspx
    after reading this article ,it looks good for WAN traffic which my concern can anyone share his expert comments.?

    More info:
    BranchCache Troubleshooting
    http://social.technet.microsoft.com/wiki/contents/articles/1296.branchcache-troubleshooting.aspx
    BranchCache Overview
    http://technet.microsoft.com/en-us/library/hh831696.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Disable Automatically Deleted Updates Download on SCCM 2012 with WSUS

    Hi
    I have SCCM 2012 SP1 with WSUS integrated, both are on the same server, I created a structure where I downloaded the updates:
    D:\Wsus\HotfixWinX
    D:\Wsus = The folder where I installed the WSUS role
    HotfixWinX = The folder where I downloaded the hotfix
    When I run "Synchronize Software Updates" the updates downloaded with a time of old age are eliminated automatically, have reviewed the log wsyncmgr and I found this:
    My question is, how can I prevent updates and updates folders to be automatically deleted?
    Thank you.

    This is a fully automated process that only works for expired updates. Do keep in mind that after this specific message the updates still exist in the console. For a very good complete explanation, see:
    http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Does anyone worked with SCCM 2012 with 1E shopping, Appclarity and Nomad

    HI all
    Is there any blog available for learning 1E products with sccm 2012?
    thanks in advance.

    1E blog site is here: http://blogs.1e.com/; however, for "learning" about 1E products, well that is something different. Our public product content is fairly high level, in an "overview" model of features and basic functions.
    You can find added info for each product on the core 1E web site under each product's subsection:
    Shopping: http://www.1e.com/shopping/. Note thee details on our newly achieved formal certification for ServiceNow integtration and the link to a "live" demo.
    AppClarity: 
    http://www.1e.com/appclarity-software-asset-management/
    Nomad: http://www.1e.com/nomad/
    NightWatchMan: http://www.1e.com/nightwatchman/
    Lastly, the Resource Center (http://www.1e.com/resource-center/0 has a wealth of case studies, white papers and so on that may be of interest.
    I'm a pre-sales technical solutions engineer, so feel free to reach out to me directly if I can be of any additional assistance in any way (Ed.Aldrich @ 1e.com)
    Ed Aldrich | 1E | Pre-Sales Solutions Engineer | ConfigManager MVP 2003-2012

  • Problems install SCCM 2012 with remote sql 2008 r2 sp2

    I am having issues installing sccm 2012 on a remote sql 2008 r2 sp2 server on a seperate instance.
    I get the error "The network path was not found"  
    if i point it at the primary instance it will let me continue but i cannot install sccm into that instance.
    I have turned off dynamic ports and set a static port but I do not see where i can enter that in the installer.
    I cannot seem to verify is the ssb port is working correctly or not.
    my account is local admin on both servers and a sql sysadm.
    There is no firewall between servers.
    Any suggestions?
    Regards
    Don

    SPN is setup to AUTO register and is working.  remote sql is not a cluster.  Windows firewall on both servers is disabled.  Sql browser is enabled and started.  we have a group for system center that contains site servers and this group
    is in the local admin of both servers and sysadm inside of sql server.
    Why  we are consolidating all or our lesser sql servers into a larger one.
    Snipt of the log.
    12/12/2012 2:57:37 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
    ], Exception details: [System.IO.IOException: The network path was not found.
    Server stack trace: 
       at Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
       at Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
       at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
       at Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
       at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
       at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
       at Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
       at Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
       at Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.Controls.Button.OnClick()
       at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
       at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
       at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
       at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
       at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
       at System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
       at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
       at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
       at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
       at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
    12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database ADMIN\master on server YSQL030.srf.local.
    12/12/2012 3:01:42 PM: ConfigMgrSetupWizard Error: 1 : Exception message: [The network path was not found.
    ], Exception details: [System.IO.IOException: The network path was not found.

  • SCCM 2007 with MDT 2012 Update 1 - LTI Build Process - "UserLocale" setting is all lowercase.

    Greetings all.  I'm trying to resolve a situation where the "UserLocale" property is being set to "en-us" opposed to "en-US".  Quick environment stats:  SCCM 2007, MDT2010, using LTI build process with a 
    custom UDI.  2 Build Sites (customer build sites), both sites have branch distribution points.
    Both sites are performing the exact same LTI builds.  Same task sequence. 
    Both sites have MDT location records that have the "UserLocale" property defined as "en-US".
    Both sites successfully build the same LTI build, but post build; Site A has correct UserLocale entry of "en-US", while Site B does not have correct UserLocale entry - it is set to "en-us".   This wouldn't normally be a big
    deal, however we have an enterprise application that is hard coded to look for case specific property of "en-US", so this application does not function as desired as Site B.
    Both builds use the same task sequence, same OS.WIM (Windows 7 x86), and same unattend.xml.  The unattend.xml does have UserLocale specified as "en-US" (and also the MDT location records for Site A and Site B both have "UserLocale"
    property defined as "en-US", so I do not understand where the lowercase "en-us" is being populated from during the client build for Site B, when it works correctly for Site A?
    Bdd.log for client build at Site A shows:
    Obtained USERLOCALE value from SQL:  USERLOCALE = en-USUpdated
    C:\WINDOWS\panther\unattend\unattend.xml with UserLocale=en-US (value was en-US)
    Property USERLOCALE is now = en-US
    Bdd.log for client build at Site B shows:
    Obtained USERLOCALE value from SQL:  USERLOCALE = en-US
    Property UserLocale_Edit is now = en-us;0409
    Property UserLocale is now = en-us
    Value for USERLOCALE is already set to en-us so database value of en-US will be ignored.
    Updated C:\WINDOWS\panther\unattend\unattend.xml with UserLocale=en-us (value was en-US)
    Value for USERLOCALE is already set to en-us so database value of en-US will be ignored.
    Can anyone offer insight as to my next troubleshooting steps? I'm not sure why Site B, bdd.log - unattend.xml shows updating UserLocale to en-us instead of en-US?
    (Please note I have verified that the OS.WIM, unattend.xml, and all MDT scripts that run during task sequence execution are exact matches on the BDP's for each site. Same size, date, and content)

    Well, there must be something that is different... If you zip up the logs (all of them) from each setup, and mail them to me, I can take a quick look.
    / Johan
    Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

  • SCCM 2012: Failed to insert OSD binaries into the WIM file' error when you create a MDT Task Sequence

    Hi,
    When I try to import the MDT boot image X86, I get the following error:
    Started processing.
    Creating boot image.
    Copying WIM file.
    Mounting WIM file.
    WIM file mounted.
    Setting Windows PE system root.
    Set Windows PE system root.
    Set Windows PE scratch space.
    Adding standard components.
    Adding component: winpe-mdac
    Adding extra content from: C:\Users\ADMINI~1.afO\AppData\Local\Temp\3\sfup2yp2.0rt
    Unmounting WIM.
    Copying WIM to the package source directory.
    Creating boot image package.
    Error while importing Microsoft Deployment Toolkit Task Sequence.
    Failed to insert OSD binaries into the WIM file
    Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException: The SMS Provider reported an error. ---> System.Management.ManagementException: Generic failure
       at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObject.Put(PutOptions options)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
       --- End of inner exception stack trace ---
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
       at Microsoft.BDD.Wizards.SCCM_ImportTaskSequenceTask.DoWork(SmsPageData smspageData, Dictionary`2 data)
    Note: previous x86 image was deleted some time ago.
    Please advise.
    J.
    Jan Hoedt

    This is the error in smsprov.log
    *********** WBEM Missing property TransformAnalysisDate    SMS Provider    16/04/2014 15:11:00    7856 (0x1EB0)
    ************ WBEM Missing property TransformReadiness    SMS Provider    16/04/2014 15:11:00    7856 (0x1EB0)
    Image language ID 1033 and en-US    SMS Provider    16/04/2014 15:11:00    7856 (0x1EB0)
    Image language ID 1033 and en-US    SMS Provider    16/04/2014 15:11:10    7856 (0x1EB0)
    Image language ID 1033 and en-US    SMS Provider    16/04/2014 15:11:19    7856 (0x1EB0)
    ERROR> Error -1073741502 returned to execute the command line: "C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\dism.exe" /Image:"C:\windows\TEMP\BootImages\{8AEF81AB-4B11-4AEF-96D3-E90D84D3DA94}\mount" /Add-Package
    /PackagePath:"C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\x86\WinPE_OCs\WinPE-Scripting.cab"    SMS Provider    16/04/2014 15:11:19    7856 (0x1EB0)
    Failed to install required components into the boot image C:\windows\TEMP\BootImages\{8AEF81AB-4B11-4AEF-96D3-E90D84D3DA94}\mount    SMS Provider    16/04/2014 15:11:19    7856 (0x1EB0)
    *~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspbootimagepackage.cpp(3766) : Failed to insert OSD binaries into the WIM file~*~*    SMS Provider    16/04/2014 15:11:36    7856 (0x1EB0)
    *~*~Failed to insert OSD binaries into the WIM file ~*~*    SMS Provider    16/04/2014 15:11:36    7856 (0x1EB0)
    Auditing: User FAC\administrator called an audited method of an instance of class SMS_BootImagePackage.    SMS Provider    16/04/2014 15:11:36    7856 (0x1EB0)
    CExtUserContext::LeaveThread : Releasing IWbemContextPtr=9281008    SMS Provider    16/04/2014 15:11:36    7856 (0x1EB0)
    Jan Hoedt

  • Thinkpad 10 SCCM 2012 R2 x64 WINPE OSD boot wim

    Trying to inject drivers in to my CM12 x64 boot wim (ADK and MDT 2013 integration with CM12) for the new Thinkpad 10 Tablet.  The x86 worked flawlessly and touch screen works on the x86 builds even my S1 Yoga.  Errors galore with the x64 versions of the drivers from the SCCM pack.  Being UEFI boot only both versions are needed and not all my locations will have the dock for using a keyboard so touch just needs to work.
    Here is what successfully got added,the 2 display drivers and thats it.  I started with all the drivers and worked in reverse by removing each driver after every error. 
    from SCCM:
    Success: Drivers that will be included:
    Realtek USB GBE Family Controller
    Lenovo USB2.0 Ethernet Adapter
    Intel(R) 5 Series 4 Port SATA AHCI Controller
    Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
    Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
    Intel(R) C600 Series Chipset SATA AHCI Controller
    Realtek USB GBE Family Controller
    VMware Pointing Device
    VMware USB Pointing Device
    VMware PVSCSI Controller
    VMware SVGA 3D
    VMware VMCI Bus Device
    vmxnet3 Ethernet Adapter
    Intel(R) HD Graphics
    ThinkPad Display 640x480
    Realtek USB GBE Family Controller
    Any help is appreciated and parkerj, as usual I am willing to be your huckleberry if needed.  On a unrelated item any tips for removing the lenovo scup data from my wsus/scup environment?  We had an issue and now i cannot publish the data.  Whick makes me sad as I think the Lenovo SCUP catalog shows good progress.  Primary issue is knowing what applies to what without publishing everything.

    Hi,
    UEFI BIOS Version: GWET23WW (1.23)
    I have managed to implement drivers in a different way. I have created a package containing all drivers and placed it in a part of task sequence running inside installed operating system instead of running in WinPE. There is a script inside a package looking like this:
    Start /w .\win\Chipset\setup.exe -s
    Start /w pnputil -i -a .\WIN\TXEI\INF\TXEI.inf
    Start /w setup.exe -SILENT
    Start /w .\WIN\Audio\setup.exe /s
    Start /w .\WIN\Bluetooth\setup.exe /s
    Start /w .\WIN\Fingerprint\WBF_SPI_DDK_Extended_Setup.exe /s
    Start /w .\WIN\GPS\setup.msi /qn
    Start /w .\HOTKEY\setup.exe /S /B /H
    pnputil -i -a .\WIN\MONITOR\TPLCD.INF
    Start /w .\WIN\NFC\setup.exe /s
    Start /w .\WIN\PMDriver\setup.exe -S -SMS
    Start /w .\WIN\WLAN\setup.exe -s
    reg import .\OSFIXES\ALSOR\ALSOR_Apply.reg
    For anyone interested just make sure you follow correct paths to executables as presented in this script.
    After running it I am left with Security Device unrecognized in Device Manager so I have to add another task sequence for Restart and than another one with a line with a package for Security Device and runing this as a command: pnputil -i -a TXEI.inf
    Using regular pre-driver deploy task sequence commands in WinPE enviorenment unfortunately didn't helped so I have ended with workarounds presented here.
    If anyone can add something to this I will be more than glad to hear.

  • SCCM 2012 and MDT 2013 PreFlight Checks

    Hi,
    Can anyone help me with a preflight check in MDT (Winpe) checking for an Active Directory Computer account. By default the pre-flight is before the page which has the field for entering the computer name. If I was to move the page later in the wizard sequence
    would I be able to use the variable OSDComputerName. Additional does anyone have any Powershell or vscript code which could query AD for the computer account existence?
    As I'll need to authenticate with AD I could use the variables OSDJoinAccount, OSDJoinPassword, OSDDomainName.
    Mike

    Hi,
    Please refer to the link below:
    MDT Scripts, Front Ends, Web Services, and Utilities for use with ConfigMgr/SCCM
    http://mdtcustomizations.codeplex.com/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for