SCCM 2012 - WSUS Cleanup

Hello,
I'm tried to find what I needed online but wasn't able to find a resource that wasn't a third party script. I heard of WSUS cleanup utility that comes with SCCM/WSUS, is this true? I would like to have our expired/superseded updates removed from the console
as part of a manual maintenance.
I know the "WSUS" Console has a link to a utility but I was under the impression that there is one specifically for WSUS in SCCM.
EDIT:
Will SCCM automatically remove the expired updates on a 7 day cycle?

Hope this helps
http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

SCCM 2012 - WSUS Issue

Hi All,
I have problem downloading the patches, I tried the below steps like
1. Uninstalling and installing the WSUS role & SUP role
2. Verified proxy account and validated the connection successfully
But when I try to sync I get the below error
WSYNC log:
Synchronizing WSUS server emscmbulprvw01.swad.net ... $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:09:03.323-60><thread=3820 (0xEEC)>
sync: Starting WSUS synchronization $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:09:03.323-60><thread=3820 (0xEEC)>
Sync failed: UssCommunicationError: WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established
connection failed because connected host has failed to respond 157.55.240.94:443~~at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
$$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.322-60><thread=7428 (0x1D04)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=EMSCMBULPRVW01.SWAD.NET SITE=BUL PID=9204 TID=7428 GMTDATE=Thu May 22 15:12:58.322 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssCommunicationError: WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection
failed because connected host has failed to respond 157.55.240.94:443~~at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.323-60><thread=7428 (0x1D04)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.347-60><thread=7428 (0x1D04)>
Setting sync alert to active state on site BUL $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.348-60><thread=7428 (0x1D04)>
Sync time: 0d00h03m56s $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.355-60><thread=7428 (0x1D04)>
Seems its using 443 port to connect to the Microsoft website instead of
80 port. Will this be a reason why its not downloading. When I checked with Proxy server team, they say its passing through proxy server and reaches Microsoft link in which after it gets timed out error. I presume it should be 80 port, please
correct me.
Regards, Pratap

Hi,
Have you enabled "Require SSL communication to the WSUS server" on SUP properties?
Please have a look on a similar problem.
http://social.technet.microsoft.com/Forums/en-US/2155ccb2-262e-45d9-a156-329ca9a22ff7/sup-stops-syncing-updates-with-windows-update?forum=configmanagersecurity
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 :::WSUS Getcookie error blocking SCEP definition Scan and updates

Please advise me what could be reasons for this issue and how to resolve it. because of this client is not able to scan and retreive updates against SUP and SCEP Defintion is not getting updated. a few set of servers are facing
this issue. Another set of servers( sccm client is working fine against same SUPs.

That does not cause any issues IMHO. There should be another error later in the log. Also examine U*.log in %windir%\ccm\logs)
Torsten Meringer | http://www.mssccmfaq.de

Sccm 2012, wsus, failed to publish client

Hi
ok, we had some issues with the offline imaging injecting updates into the images after looking at some posts on here I decided to uninstall wsus take the role off the server it was on then reinstall again. we have also updated to R2 the CU1, knock on effect
from this is the client isn't being published see log below., my question is how do I get the clients matched up?
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014
07:35:38 4012 (0x0FAC)
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Failed to publish client with error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Regards
Dave

To fix this issue, check solution of "El_Tex_de_Person" in below link
http://social.technet.microsoft.com/Forums/systemcenter/en-US/054075d6-6898-4a71-b152-52cb272a393c/client-will-not-publish-through-sup?forum=configmgrsetup
Also check below linkhttp://www.faqshop.com/wp/configmgr/cm12/cm12trobshoot/cm12clients/error-failed-to-publish-sms-client-to-wsus-error-0x80131622
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCCM 2012 WSUS Sync Issue

Hello,
Our Syncs are currently failing because there's too many failure updates due to EUAs. Is there a way I can increase the threshold so it will just continue on?
Error: The Microsoft Software License Terms have not been completely downloaded and~~cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById $$<SMS_WSUS_SYNC_MANAGER><03-06-2014 15:26:38.674+300><thread=7604
(0x1DB4)>

There is apparently a hotfix available for this issue which might be worth a try if you encounter this issue when proxy credentials are required
http://support.microsoft.com/kb/2838998
there is also a workaround to set the proxy account details in IE, but in the Site System properties only have "Use a proxy server when synchronizing internet sourced information".
Leave "Use Credentials to connect to the proxy server" blank.

[SCCM 2012 SP1 W2K8R2] SUP not in Sync with WSUS settings (Language)

Hi All,
I have almost identical production and test SCCM environment.
After I setup SUP on both production and test environment SUP Language settings are not replicated to WSUS and cause WSUS/SCCM to Sync all languages.
SCCM 2012:
WSUS:
Any idea how to fix this?
Thank you in advance.
Regards,

Hi,
There is nothing to fix, it looks exactly the same in my environment. The updates are not downloaded using WSUS it is downloaded using either the SCCM console or the SCCM Primary Site server if you use and ADR and when you download the updates the settings
are beeing honoured.
So this is expected behaviour.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Can we re-activate Adobe patches once expired in SCUP and syncronized to WSUS and SCCM 2012 as expired?

Hi,
I expired a couple of Adobe patches in SCUP and published them in WSUS. They got synchronized in WSUS and SCCM as expired. After about two weeks those expired patches got cleaned from SCCM ( at least from UI).
I want to activate them again in SCUP and re-publish as active patches in SCCM. But its not working - I've tried WSUS cleanup and SCUP cleanup already!
Is there any way to re-active expired patches published by SCUP in WSUS and SCCM ? & How?
Excerpt from SCUP.Log:
PublishItem: Item 'Reader Multi Lingual User Interface 10.1.4 Update (UpdateId:'5c22235f-a3d9-48db-95eb-a60ec1886e8e' Vendor:'Adobe Systems, Inc.' Product:'Adobe Reader')' is on the update server and is expired, no publish actions are possible.

The key here is knowing WHY those updates were "expired" in the first place.
Most likely they were expired because they superseded another update. If so, merely duplicating and publishing won't achieve anything, because the duplicated/re-published update will also be superseded and get promptly expired again.
Ergo, if expired because superseded, the superseding package will need to be customized to remove the supersession references and it also will need to be republished, which also means that certain other considerations may need to be taken as well ... such
as the fact that you now have multiple packages that will conflict with one another that no longer have the requisite supersession metadata.
Regarding this scenario. Configuration Manager 2012 introduced the option to NOT EXPIRE superseded updates, or to defer the expiration for a specified number of days. This is not a SCUP thing; it's a ConfigMgr thing.
Configure the ConfigMgr product to behave the way you desire. Problem solved. :)
If YOU actually expired them in SCUP... then just UNEXPIRE them and republish. Shouldn't be any need to duplicate and republish. This is what Microsoft does all the time. Expire Update 'A' Rev 100 on Monday; publish Update 'A' Rev 101 on Patch Tuesday.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Disable Automatically Deleted Updates Download on SCCM 2012 with WSUS

Hi
I have SCCM 2012 SP1 with WSUS integrated, both are on the same server, I created a structure where I downloaded the updates:
D:\Wsus\HotfixWinX
D:\Wsus = The folder where I installed the WSUS role
HotfixWinX = The folder where I downloaded the hotfix
When I run "Synchronize Software Updates" the updates downloaded with a time of old age are eliminated automatically, have reviewed the log wsyncmgr and I found this:
My question is, how can I prevent updates and updates folders to be automatically deleted?
Thank you.

This is a fully automated process that only works for expired updates. Do keep in mind that after this specific message the updates still exist in the console. For a very good complete explanation, see:
http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

SCCM 2012 on Server 2012 and WSUS 3.0 SP2 on Server 2008

We are installing SCCM 2012 SP1 fresh into our development environment - the primary site server and the database (SQL 2012) are both being installed on Server 2012.
We have an existing WSUS box on a Windows 2008 (not R2) server - the WSUS server version is 3.2.7600.256. We have set this up as the software update point.
For the purposes of this discussion, these are the server names (obviously obfuscated):
Primary site server: sccm.domain.local
Database server: sccmdb.domain.local
WSUS server: wsus.domain.local
On the primary SCCM server, I've installed the WSUS user interface (Install-WindowsFeature -Name UpdateServices-UI), in order to work with the remote WSUS server.
Updates synchronization appears to be working fine, but when I try to setup client distribution via SUP, I'm getting the following error in the Application event log:
Log Name:      Application
Source:        SMS Server
Date:          8/6/2013 11:03:11 AM
Event ID:      6613
Task Category: SMS_WSUS_CONFIGURATION_MANAGER
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      sccm.domain.local
Description:
On 8/6/2013 11:03:11 AM, component SMS_WSUS_CONFIGURATION_MANAGER on computer sccm.domain.local reported: WSUS Configuration Manager failed to publish client boot-strapper package "9D5353E5-DA80-48C3-97DE-C9C528F73A2D" with version "5.00.7804.1000"
to the Software Updates Point.
As well as this in the WMC.log:
PublishApplication(9D5353E5-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) $$<SMS_WSUS_CONFIGURATION_MANAGER><08-06-2013
11:03:11.787+240><thread=3704 (0xE78)>
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 $$<SMS_WSUS_CONFIGURATION_MANAGER><08-06-2013 11:03:11.803+240><thread=3704 (0xE78)>
It would seem obvious that this is because of a mismatch in versions between the WSUS server version on wsus.domain.local, compared to the UpdateServices UI on sccm.domain.local.
Is there a way around this, without having to upgrade the WSUS server to Server 2012?
Thanks for any thoughts you may have!

Not really. As mentioned though, even the separate WSUS server is probably overkill. In ConfigMgr, WSUS is used to handle the update catalog and that's it. Clients do *not* report status to the WSUS instance and do *not* download updates from the WSUS instance.
No management is ever done in WSUS.
So, in reality, once a month, clients connect to WSUS to download the delta update catalog (delta compared to what they currently have) which usually comes out to about a few hundred KB (yes KB, not MB) -- this download is done via BITS. The server also
syncs the catalog from the WSUS instance, via the SUP, in a similar fashion. If you are using SCEP, the frequency will be greater, but the deltas will be much smaller.
EULAs, as needed, are also stored in WSUS and accessed by clients -- these are also quite small only a select few updates requires them.
That's it. Standing up a dedicated WSUS instance means having a server sitting there doing almost nothing else.
If you are concerned about load on the site server, then you should create a separate site system that contains the MP, SUP (and WSUS instance), and DP. Then, for HA purposes, you can simply build a second site system with these three roles also and HA will
essentially be automatic (from a client functionality perspective).
Jason | http://blog.configmgrftw.com

SCCM 2012 R2 WSUS wsyncact error 0x8013141A

i have new servers with Server 2012 R2, SCCM 2012 R2, and SQL 2012 SP1 CU6. SCCM will not sync with WSUS. "Synchronize Software Updates" fails and no updates appear and the scheduled sync in "SUP Component Properties"\"Sync
Schedule" runs, the WSUS servers do not sync with their upstream servers. There are no errors in the WCM and WSUSCtrl logs. The wsyncmgr log has these errors:
Sync failed. Could not load file or assembly '5120 bytes loaded from wsyncact, Version 5.0.0.0, Culture=-neutral, PublicKeyToken=(alphanumeric string) or one of its dependencies. Strong name validation failed. ) Exception from HRESULT: )x8013141A). Source:
wsyncact
STATMSG; ID-6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=(servername) SITE=(site code) PID=2704 TID=5516 GMTDATE=(date/time) ISTR1="Could not load file or assembly 'updmgrclr, Version=5.0.7958.1000, Culture=neutral,
PublicKeyToken=(alphanumeric string)" or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)" ITR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0
Sync failed. Will retry in 60 minues.
Moving the servers to an OU with no policies does not help. Setting registry entries to turn off strong name validation does not help.
I did find one post that said the ports in IIS and in SCCM need to match. My do, IIS and SCCM both have 8530/8531.
Suggestions?
Ben JohnsonWY

SOLVED. FINALLY!
Do an internet search for "Keith McGuinness" and "Strong name Validation Failed (Exception from HRESULT 0x8013141A)"
You need to create these two registry keys:
[HKLM\Software\Microsoft\StrongName\Verification\*,123adf9123]
[HKLM\Software\Wow6432Node\Microsoft\StrongName\Verification\*,123adf9123]
You need to do this key pair for each 0x8013141A error you have that has a unique PublicKeyToken. Note that the "*,123adf9123" is a key, not a DWORD or anything else. Also, you have to change 123adf9123 to the PublicKeyToken(s) showing in your
error messages within WSUS. You can then force a new sync by setting a sync time a couple minutes in the future with configure SUP under Administration\Sites.
Note: I did this on the site server.
Ben JohnsonWY

WSUS Server settings and Migrating SCCM 2007 Clients to SCCM 2012 R2

I am in the process of migrating a site from SCCM 2007 to SCCM 2012 R2.
Whilst doing this I came across the following issue:
The first issue is the workstations are woefully out of date, patch and update-wise, some have never had a patch applied as the branch IT staff are building them from the original disk. The policy is set in the SCCM 2007 client to point the machines at
the 2007 WSUS server, which is not set to deliver any updates to 2007 clients and hasn't been for a while. So as soon as the client is installed they lose the ability to get updates from Microsoft and don't get them from the 2007 WSUS server either.
Issue number 2 is the machines are a mixture of hand-built machines to SCCM 2007 delivered images, the SCCM image is patch using offline patching so they are somewhat up-to-date, but the hand-built machines are not and as there is no standardization on
the Microsoft Update client settings, the IT person on-site sets it to whatever he/she feels like, as it makes no difference once the client is installed and the policy applied.
So, when I come to update the client from 2007 to 2012, the following occurs
The Client uninstalls, and the GPO policy settings for Windows Update are removed.
Depending on the setup of the client initially, some machines are then going to Microsoft for their updates (literally 100s) and although the new client is installed the policy update does not fire to update the Windows Update Policy settings, sometimes
for hours after the install finishes. My thoughts are that it just can't run the policy as it is bogged down by patches updating and, in some cases, rebooting and then updating some more.
As a workaround I have had to go in an physically disable Microsoft Update on these machines, which stops the downloading and eventually allows the policy to apply, after which the machine then begins to receive patches from WSUS in a controlled method during
maintenance windows.
I have tried a number of approaches, even setting the Global Group Policy for Windows Update, but the install still removes the keys and basically sets Windows updates back to whatever it was set before the policy was applied and stays that way until the
new client is installed and the Machine policy reapplied. This can be speeded up by initiating it on the client obviously, but that would mean going to each client or using right-click tools on each machine, which is not an option.
What I would like to know is if there is something I am missing from my methods or is it just that I have never been on a site with such out of date workstations built in such different ways.
Any help would be appreciated.

First note that clients do *not* get updates from WSUS in ConfigMgr. The Windows Update Agent (WUA) must point to the WSUS integrated into ConfigMgr (by virtue of having the SUP installed on it) but this is only to make the update catalog/metadata available
to it. Approving updates in WSUS is unsupported for ConfigMgr.
What you've described above is all working as designed although these clients are falling into a gap between the 2007 and 2012 configuration and thus they are reaching out to Windows Update during this gap and installing updates. To prevent this, you
need to disable automatic updates via a domain group policy. This will prevent all automated WUA activity including installing updates from any source automatically. This will not interfere with ConfigMgr Software Updates in any way though.
Jason | http://blog.configmgrftw.com | @jasonsandys

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.

Hi All,
Good day to all you.
I would like to seek all your help on this issue that i have encountering.
My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
Error:
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
below are wsyncmgr.log:
Setting sync alert to active state on site C01 SMS_WSUS_SYNC_MANAGER (0x1690)
Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Starting Sync SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Read SUPs from SCF for MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Found active SUP MYHQKUL990707S.sdb.com from SCF File.
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
5776 (0x1690)
Synchronizing WSUS server MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
5776 (0x1690)
Using account sdb\SCCM-Admin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Synchronizing WSUS server myhqkul990707s.sdb.com ...
SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
440 (0x01B8)
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
All response is much appreciated
Thank You

Hi,
I recommend you look at the IIS log. Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012

I am rebuilding my SCCM 2012 lab on Server 2012 R2 x64 OS now.
I have 1 primary site, remote SQL server 2012, and remote WSUS server.
Is the WSUS console still required on my primary site running server 2012? If so are the below the correct steps to get this working?
Install Console on primary server:
Go to Server Manager à Add Roles and features, Navigate to the features section.
Remote Server Manager tools
>Role Administration Tools
--Select Windows Server Update Services Tools Only
Are there any post hotfixes to install?
Intalling WSUS full version on remote server:
Go to Server Manager à Add Roles and features, Server Roles section.
Windows Server Update Services
Do I need to select this as well on the remote wsus server? >Role Administration Tools -Select Windows Server Update Services Tools Only
Since my SQL server is on a remote server do I select the below only?
Are there any post hotfixes to install?

Hi,
One Part of the question is already answered. The second part is: If you want to use a remote SQL Server you need to select exactly what you selected in your screenshot.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de

SCCM 2012 - WSUS Cleanup

Similar Messages

Maybe you are looking for