Sccm 2012, wsus, failed to publish client

Hi
ok, we had some issues with the offline imaging injecting updates into the images after looking at some posts on here I decided to uninstall wsus take the role off the server it was on then reinstall again. we have also updated to R2 the CU1, knock on effect
from this is the client isn't being published see log below., my question is how do I get the clients matched up?
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014
07:35:38 4012 (0x0FAC)
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Failed to publish client with error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Regards
Dave

To fix this issue, check solution of "El_Tex_de_Person" in below link
http://social.technet.microsoft.com/Forums/systemcenter/en-US/054075d6-6898-4a71-b152-52cb272a393c/client-will-not-publish-through-sup?forum=configmgrsetup
Also check below linkhttp://www.faqshop.com/wp/configmgr/cm12/cm12trobshoot/cm12clients/error-failed-to-publish-sms-client-to-wsus-error-0x80131622
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Similar Messages

Sccm 2012 DP failed to create iis virtual directories

I am trying to install a branch server as Sccm 2012 DP.
I already installed around 15 branch servers without any problems.
The problem I have is that the branch server failed to create iis virtual directories.
In my console under Monitoring, component status It writes that Distribution Manager successfully installed iis component of operating system to distribution point ""
Next it writes error to send packages to that branch server.
The site server distmgr.log shows the error below:
Failed to start primary service wdsserver
Microsoft Sql Server Native Client 11.0 login failed for user "xxx"
Failed to connect to the sql server connection type : SMS ACCESS
for Display = \\myserver\mswnet: sms_site= XXX failed to get master SCF.
Currently site xxx is initializing site control data. Cant get Master SCF from database at this time. will try later.
DPConnection;;;; ConnectWMI() failed to connect to branch server.
I try to remove the dp role, leave it for 12 hours reboot the server and assign the role again but same problem.
Any idea ?
Nikkoscy

Hi,
Have you installed all features required?
Technet prerequisite list for site system roles:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

"Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

Hi
We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
source site" but data gathering process is completing successfully.
Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
Thanks in Advance
srkr

Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
site" but data gathering process is completing successfully.
Earlier all the shared DPs are showing under Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Upgrade to SCCM 2012 R2 Failed - Can I Simply Move SCCM Database to Replacement SCCM 2012 R2 System?

I started with SCCM 2012 RTM and attempted an upgrade to SCCM 2012 R2. The upgrade failed and left the the system unusable. I was able to recover the entire system (single server) from backup.
Rather than risk another failed upgrade can I simply build a new server and move the existing SCCM database to a new SCCM 2012 R2 system?

Hi,
Here is an official article talks about Upgrade for your reference.
Planning to Upgrade System Center 2012 Configuration Manager
http://technet.microsoft.com/en-us/library/jj822981.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 SP1 fails to install OSD of Captured Image

I installed Windows Server 2012, Visual Studio Pro 2008, 2010, 2012 and SQL Server 2012 onto a machine. Configured the settings on Windows Server 2012 and SQL 2012 to how the Developers requested to be configured. Ran the Capture Media from SCCM 2012 SP1,
saved to the designated network share. Capture was successful.
I create a TS to deploy the image to the other Dev Servers but it reboots to say no valid operating system found. I checked Monitoring for the Deployment I see the Task sequence but has the following error: Device - Unknown, MessageID - 11170, Description
- The task sequence manager could not successfully complete execution of the task sequence.
I see in the Apply Operation System from a captured image shows 1-1, 2-2, or 3-3. Does it matter which one I select and if so what does the numbers mean?
Any help is greatly appreciated, thanks!!

Hi Blacksuit,
Those numbers of the captured image stand for the indexes that are part of your WIM. And yes, it does matter which one you select. In the ConfigMgr console, go to your Software Library > Operating Systems > Operating System Images and select
the image you imported into ConfigMgr. Then at the bottom, click the Details tab to display your indexes. The index that contains your OS will have an OS Version and a description. The other indexes will be data images and not contain any
information in the Details tab. You'll need to choose the index (number) that contains the OS for the Apply OS step. To apply the data image indexes, use the Apply Data Image task sequence step and specify the partitions to apply the images
too before the Apply OS step.
Good luck!
-Matt

Microsoft Intune and SCCM 2012 R2 Integration - Windows 7 clients.

Hi All,
This is our scenario I am trying to find out more about Intune integration with SCCM 2012 R2 and what solution is best for us.
We have a SCCM 2012 R2 instance up and running which services/monitors machines on our internal network. All of these machines are Windows 7 OS. We have laptops that travel frequently and need for these to report back to our SCCM server whilst connected
via internet connections. Also we have multiple "off domain" machines (ie workgroup machines) which we also need to report back to the same SCCM server.
I have read a lot about Intune integration with SCCM but it appears to be targetted at MDM not around PC management.
What would be the best way for us to move forward?
Thanks in advance.

Just see my reply in the ConfigMgr forums.
Torsten Meringer | http://www.mssccmfaq.de

Issue with SCCM 2012 SP1 U5 upgrade and client published version

Recently we upgraded our SCCM server to SP1 U5, and our published and available client version is still at 5.00.7804.1000 instead of 5.00.7804.1600. We ran the hotfix to upgrade it and it looked like everything had went through. Does this not also
upgrade the client? It doesn't seem like you can run the hotfix again after you've already installed it once to repair either. Is there another way to update the published version inside the console? We have it as a package right now to deploy to all the systems
but I was hoping we could upgrade the internal one and let it run more automatically. Any advice would be greatly appreciated.

More info:
How to update ConfigMgr clients automatically… in SP1
http://configmgrblog.com/2012/12/03/how-to-update-configmgr-clients-automatically-in-sp1/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012: USMT Failing

I am still new to SCCM, and we have 2012 SP1 environment. While attempting to deploy a new device, I ran a Capture Only task sequence (TS) on the old device after setting up a side-by-side association. The current progress in ConfigMgr shows as "in
progress".
Next, on the newly imaged device, I added it to at RestoreOnly TS and kicked it off, but it fails with a generic error 0x00004005 after installing. This seems like a rather generic error. This is also my first time using this feature, so I do not know the
last time it was working.
This error has popped up on a second device when attempting to perform the capture only TS. I am attempting to find a way to troubleshoot this but can't find the applicable status message query. So, I suppose my question is has anyone come across this error
before? Can someone point ime n the right direction to troubleshoot this?

Hi,
Is there any relevant error in loadstate.log on the client?
It records details about the User State Migration Tool (USMT) and restoring user state data.
Also, I recommend you check the permission of the resource folder when you are ready to run restore TS.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 - WSUS Cleanup

Hello,
I'm tried to find what I needed online but wasn't able to find a resource that wasn't a third party script. I heard of WSUS cleanup utility that comes with SCCM/WSUS, is this true? I would like to have our expired/superseded updates removed from the console
as part of a manual maintenance.
I know the "WSUS" Console has a link to a utility but I was under the impression that there is one specifically for WSUS in SCCM.
EDIT:
Will SCCM automatically remove the expired updates on a 7 day cycle?

Hope this helps
http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
Cheers
Paul | sccmentor.wordpress.com

SCCM 2012 OSD Fails After Formatting and Partitioning Disks

Hello,
The problem is that when I deploy the task sequence to a computer, it loads to WindowsPE properly, then continues to formatting the hard disk and partitioning. After it has finished partitioning it then goes to the applying
the operating system portion of the task sequence. Finally it errors out with "...Image has failed with the error code (0x80070002)...". What is left on the WinPE is two log files in the SMSTSLog directory, smsts.log and wpeinit.log. Neither of these
seemed to show anything blatantly obvious to me, but I'm sure there is still some funny things happening.
This is my first time posting to a help forum of any kind so any constructive criticism is very welcome! Thanks for helping in advance, since SCCM has probably been the most challenging software I have had to setup. I
definitely need the help.
Apparently I can't just throw in all of my logs at once, so I shortened the smsts.log and removed the wpeinit.log. So just say if you need them I guess.

It's probably your network access sccount!<o:p></o:p>
"To configure the Network Access Account, open the CM2012 R2 console, click on Administration,
expand Overview, expand Site Configuration,
click Sites, on the top ribbon click Configure
Site Components, click Software Distribution.<o:p></o:p>
Click on the tab Network Access Account,
choose Specify the account that accesses network locations (by default the option is set to Use
the computer account of Configuration Manager client). Click on the orange icon and add the user account that enough permissions to access the content which is required
while deploying Operating System."<o:p></o:p>
This account should have the minimum appropriate permissions on operating system deployment content it needs to access. This account
is important because the computer receiving the operating system does not have a security context it can use to access content on the network.<o:p></o:p>

SCCM 2012 - WSUS Issue

Hi All,
I have problem downloading the patches, I tried the below steps like
1. Uninstalling and installing the WSUS role & SUP role
2. Verified proxy account and validated the connection successfully
But when I try to sync I get the below error
WSYNC log:
Synchronizing WSUS server emscmbulprvw01.swad.net ... $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:09:03.323-60><thread=3820 (0xEEC)>
sync: Starting WSUS synchronization $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:09:03.323-60><thread=3820 (0xEEC)>
Sync failed: UssCommunicationError: WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established
connection failed because connected host has failed to respond 157.55.240.94:443~~at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
$$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.322-60><thread=7428 (0x1D04)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=EMSCMBULPRVW01.SWAD.NET SITE=BUL PID=9204 TID=7428 GMTDATE=Thu May 22 15:12:58.322 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssCommunicationError: WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection
failed because connected host has failed to respond 157.55.240.94:443~~at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.323-60><thread=7428 (0x1D04)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.347-60><thread=7428 (0x1D04)>
Setting sync alert to active state on site BUL $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.348-60><thread=7428 (0x1D04)>
Sync time: 0d00h03m56s $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.355-60><thread=7428 (0x1D04)>
Seems its using 443 port to connect to the Microsoft website instead of
80 port. Will this be a reason why its not downloading. When I checked with Proxy server team, they say its passing through proxy server and reaches Microsoft link in which after it gets timed out error. I presume it should be 80 port, please
correct me.
Regards, Pratap

Hi,
Have you enabled "Require SSL communication to the WSUS server" on SUP properties?
Please have a look on a similar problem.
http://social.technet.microsoft.com/Forums/en-US/2155ccb2-262e-45d9-a156-329ca9a22ff7/sup-stops-syncing-updates-with-windows-update?forum=configmanagersecurity
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 :::WSUS Getcookie error blocking SCEP definition Scan and updates

Please advise me what could be reasons for this issue and how to resolve it. because of this client is not able to scan and retreive updates against SUP and SCEP Defintion is not getting updated. a few set of servers are facing
this issue. Another set of servers( sccm client is working fine against same SUPs.

That does not cause any issues IMHO. There should be another error later in the log. Also examine U*.log in %windir%\ccm\logs)
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012: package update, when will clients have it?

Hi,
We have a deployed package which we needed to change/upate. We updated the source and distributed the (existing) package to the distribution point.
The package is set as available. When can we be sure that when client run it, they'll have the latest package (and not the one in cache)?
Please advise.
J
Jan Hoedt

The package is set as available. When can we be sure that when client run it, they'll have the latest package (and not the one in cache)?
Keep in mind that clients that already installed it won't re-run it automatically then.
Torsten Meringer | http://www.mssccmfaq.de

Upgrade to SCCM 2012 R2 Fails by ADD SQL ACCOUNT

Hello,
im Testing Today the Upgrade to R2.
in Step to Upgrade the Database I become an Error xxx\Compuertname not found to add SQL Account
My Server name is xxx.de\computername an not xxx\computername (netbiosname with dot and same with DNS Name) .
Have anywhere an Idea as Workaround for me ?

Microsoft support were no help...
I found a couple work arounds:
Move the database to the site server, do the upgrade, move the database back to the database server
Hack the DB:
create a login with a valid user account on the master DB on the SQL server
stop the sql server
Start SQL in single server mode
From an elevated cmd (Run as administrator), access the right folder where sqlservr.exe executable is located and execute below commands. Normally you will find it at “C:\Program Files\Microsoft SQL Server\MSSQL[InstanceName]\MSSQL\Binn”
C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Binn>sqlservr.exe -m
start SSMS in DAC mode: start SSMS, cancel the connection to the server,click on the
Database Engine Query icon (to the right of the new query button),and put admin: in front of the server name
run the following:
select @@servername
GO
use master
GO
sp_configure 'allow updates', 1
GO
reconfigure with override
GO
then do this:
update
master.sys.server_principals
set master.sys.server_principals.name
= 'domain\servername$'
where master.sys.server_principals.name
= 'domain.com\dummyaccount'
restart the sql server
upgrade SCCM
keep in mind i am currently testing this solution to make sure it doesn't cause issues

SCCM 2012 WSUS Sync Issue

Hello,
Our Syncs are currently failing because there's too many failure updates due to EUAs. Is there a way I can increase the threshold so it will just continue on?
Error: The Microsoft Software License Terms have not been completely downloaded and~~cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById $$<SMS_WSUS_SYNC_MANAGER><03-06-2014 15:26:38.674+300><thread=7604
(0x1DB4)>

There is apparently a hotfix available for this issue which might be worth a try if you encounter this issue when proxy credentials are required
http://support.microsoft.com/kb/2838998
there is also a workaround to set the proxy account details in IE, but in the Site System properties only have "Use a proxy server when synchronizing internet sourced information".
Leave "Use Credentials to connect to the proxy server" blank.

Sccm 2012, wsus, failed to publish client

Similar Messages

Maybe you are looking for