SCCM 2012 - WSUS Issue

Hi All,
I have problem downloading the patches, I tried the below steps like
1. Uninstalling and installing the WSUS role & SUP role
2. Verified proxy account and validated the connection successfully
But when I try to sync I get the below error
WSYNC log:
Synchronizing WSUS server emscmbulprvw01.swad.net ... $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:09:03.323-60><thread=3820 (0xEEC)>
sync: Starting WSUS synchronization $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:09:03.323-60><thread=3820 (0xEEC)>
Sync failed: UssCommunicationError: WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established
connection failed because connected host has failed to respond 157.55.240.94:443~~at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
$$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.322-60><thread=7428 (0x1D04)>
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=EMSCMBULPRVW01.SWAD.NET SITE=BUL PID=9204 TID=7428 GMTDATE=Thu May 22 15:12:58.322 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssCommunicationError: WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection
failed because connected host has failed to respond 157.55.240.94:443~~at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.323-60><thread=7428 (0x1D04)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.347-60><thread=7428 (0x1D04)>
Setting sync alert to active state on site BUL $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.348-60><thread=7428 (0x1D04)>
Sync time: 0d00h03m56s $$<SMS_WSUS_SYNC_MANAGER><05-22-2014 16:12:58.355-60><thread=7428 (0x1D04)>
Seems its using 443 port to connect to the Microsoft website instead of
80 port. Will this be a reason why its not downloading. When I checked with Proxy server team, they say its passing through proxy server and reaches Microsoft link in which after it gets timed out error. I presume it should be 80 port, please
correct me.
Regards, Pratap

Hi,
Have you enabled "Require SSL communication to the WSUS server" on SUP properties?
Please have a look on a similar problem.
http://social.technet.microsoft.com/Forums/en-US/2155ccb2-262e-45d9-a156-329ca9a22ff7/sup-stops-syncing-updates-with-windows-update?forum=configmanagersecurity
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

SCCM 2012 database issue /question

Hi All
We have 2 recurring errors on our Primary Server (SQL locally installed so a local database).
We have recently updated SCCM 2012 RTM -> SCCM 2012 SP1 (no CU), and we have upgraded SQL 2008 R2 (CU6) to SQL 2008 R2 SP2.
We have exactly the same issue in our TST environment.
Both errors are related to SQL
We checked the SQL server log,
The fist error:
Warning: Failure to calculate super-latch promotion threshold.
I don’t now where to search for this error also google did not provide me with some useful help, I hope someone here can help me with this one.
The second error:
This one has something to do with the stored procedure DRSMsgBuilderActivation
The activated proc '[dbo].[spDRSMsgBuilderActivation]' running on queue 'CM_XXX.dbo.ConfigMgrDRSMsgBuilderQueue' output the following:
'ERROR: Sync of type Configuration Data failed, see previous messages for details.'
And the previous message is the following :
The activated proc '[dbo].[spDRSMsgBuilderActivation]' running on queue 'CM_XXX.dbo.ConfigMgrDRSMsgBuilderQueue' output the following:
'ERROR 3961, Level 16, State 1, Procedure spDRSSendChangesForGroup, Line 1, Message: Snapshot isolation transaction failed in database 'CM_XXX' because the object accessed by the statement has been modified by a DDL statement in another concurrent transaction
since the start of this transaction. It is disallowed because the metadata is not versioned. A concurrent update to metadata can lead to inconsistency if mixed with snapshot isolation.'
I did some checking and there is no problem with the tempdb
Also with this error I hope that someone can help me
Perhaps someone has had the same error
Regards and thx in advance
Johan

hi, one thing I did not understand is, what is the effect on the non technical side of this error?
On the technical side you can find some information in error logs. This it's what I understood.
Is your sccm server working? Or is it not even possible to finish the sccm installation?

SCCM 2012 PXE issues with Acer Machines?

Hi,
I am having a strange issue with PXE trying to build a machine with a Windows 7 Task Sequence.
Ok here is the synario - I have 2 machines that do not get any offers from PXE - so I get that error No DHCP
or proxy DHCP offers were received. However if I make a bootable USB key and boot the *same* machines my
task sequence appears on the menu that I can select. (The task sequence is deployed to PXE and Media BTW).
Now it gets strange - if I take other machines and put the on the same network cable and F12 them PXE works
and I get the task sequence presented. So same PXE server - same DHCP server.
So from my logic I figure if I had a policy type problem then it would not present the task sequence when
I try the boot usb.
Both the machines I am having issues with are ACER btw if people know of any know issues. I am starting
to suspect I have faulty hardware etc. One machine is a Acer Travelmate P633-V Laptop and the other machine is
Acer Veriton VS6620G desktop.
Any suggestions on how to resolve this - it seem very strange.
My environment is SCCM 2012 SP1 btw.
Is there something I am missing here :)
Thanks,
Ward.

Hi,
Thanks for all the sugestions. I can confirm that the machines
when an OS is on them do register the IP addresses with the DHCP/WDS server (same box). Also I can confirm the Unknown computer support is turned on the box in SCCM 2012 on the DP.
Ok but I did get one working which I can't explain why it works
the way it does.
On the notebook if I enable secure boot (UEFI) and boot with PXE
it works :) It appears the stupid BIOS turns this on but disables
another setting called "Network Boot" which is crazy. So if
you turn both on Secure boot enabled and "Network Boot" is on it works.
Now here is the puzzle that still stumps me - switch this back to
legacy mode and no go - no PXE. Boot other non UEFI machines and
they PXE boot.
The WDS/DHCP/SCCM DP server is Windows 2008 (all on one box) as I understand it does not support UEFI PXE - this is in Windows 2012. I don't think there is an option in SCCM 2012 for it.
So can somebody offer me a technical explination?
Is there something else I am missing?
I still am trying to work out how to get the desktop to UEFI PXE boot if this is possible.
Thanks,
Ward

SCCM 2012 SP1 issues

Hello
I have a SCCM 2012 site configured. This is a signle site setup. I wanted to upgrade to SP1 but unfortanetly it isn't working. When I try to run the update I go through the wizard and when the install is supposed to happen it just returns
to the splash screen. Also now I can't get into the managment console. I have tried uninstalling the console and reinstalling the console with no success.
Please advise.

I made sure that all the permission are correct on our SQL server and they appear to be good. I tried to run the setup again and downloaded all the files again and the same issue. Here is the log.
This was the only error: CSql Error: Cannot find data for connection type: TEST_ROLE_ACCESS, cannot get a connection. Configuration Manager Setup 4/3/2014 11:06:12 AM 988 (0x03DC)
INFO: Checking Service Account: Sql server:<SERVER NAME>, Instance:<>, Service Account:<LocalSystem>.
Configuration Manager Setup    4/3/2014 11:05:52 AM
988 (0x03DC)
INFO: 'User State Migration Tool' component of ADK is installed.
Configuration Manager Setup    4/3/2014 11:05:52 AM
988 (0x03DC)
INFO: File C:\Windows\smstsvc_test_1.exe does not exist. No zapping needed.
Configuration Manager Setup
4/3/2014 11:05:52 AM    988 (0x03DC)
INFO: test loop count:0.
Configuration Manager Setup    4/3/2014 11:05:58 AM
988 (0x03DC)
INFO: smstsvc_test_1 Return result <7>
Configuration Manager Setup    4/3/2014 11:05:58 AM
988 (0x03DC)
INFO: File C:\Windows\smstsvc_test_2.exe does not exist. No zapping needed.
Configuration Manager Setup
4/3/2014 11:06:04 AM    988 (0x03DC)
INFO: test loop count:0.
Configuration Manager Setup    4/3/2014 11:06:10 AM
988 (0x03DC)
INFO: smstsvc_test_2 Return result <0>
Configuration Manager Setup    4/3/2014 11:06:10 AM
988 (0x03DC)
INFO: SQL Server version detected is 10.50, 10.50.2811.0 (SP1).
Configuration Manager Setup    4/3/2014 11:06:12 AM
988 (0x03DC)
INFO: Checking Windows Cluster.
Configuration Manager Setup    4/3/2014 11:06:12 AM
988 (0x03DC)
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e
Configuration Manager Setup    4/3/2014 11:06:12 AM
988 (0x03DC)
INFO: WMI namespace root\MSCluster not exists on SERVER NAME.
Configuration Manager Setup    4/3/2014 11:06:12 AM
988 (0x03DC)
INFO: 'Windows Deployment Tools' component of ADK is installed.
Configuration Manager Setup    4/3/2014 11:06:12 AM
988 (0x03DC)
INFO: 'Windows PE' component of ADK is installed.
Configuration Manager Setup    4/3/2014 11:06:12 AM
988 (0x03DC)
CSql Error: Cannot find data for connection type: TEST_ROLE_ACCESS, cannot get a connection.
Configuration Manager Setup 4/3/2014 11:06:12 AM
988 (0x03DC)
INFO: File C:\Windows\smstsvc_test_3.exe does not exist. No zapping needed.
Configuration Manager Setup
4/3/2014 11:06:12 AM    988 (0x03DC)
INFO: test loop count:0.
Configuration Manager Setup    4/3/2014 11:06:18 AM
988 (0x03DC)
INFO: smstsvc_test_3 Return result <0>
Configuration Manager Setup    4/3/2014 11:06:18 AM
988 (0x03DC)
INFO: Checking Windows Cluster.
Configuration Manager Setup    4/3/2014 11:06:20 AM
988 (0x03DC)
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e
Configuration Manager Setup    4/3/2014 11:06:20 AM
988 (0x03DC)
INFO: WMI namespace root\MSCluster not exists on SERVER NAME-SC1.walshcollege.edu.
Configuration Manager Setup 4/3/2014 11:06:20 AM
988 (0x03DC)
INFO: File C:\Windows\smstsvc_test_4.exe does not exist. No zapping needed.
Configuration Manager Setup
4/3/2014 11:06:20 AM    988 (0x03DC)
INFO: test loop count:0.
Configuration Manager Setup    4/3/2014 11:06:26 AM
988 (0x03DC)
INFO: smstsvc_test_4 Return result <5>
Configuration Manager Setup    4/3/2014 11:06:26 AM
988 (0x03DC)
INFO: Checking Windows Cluster.
Configuration Manager Setup    4/3/2014 11:06:28 AM
988 (0x03DC)
CWmi::Connect(): ConnectServer(Namespace) failed. - 0x8004100e
Configuration Manager Setup    4/3/2014 11:06:28 AM
988 (0x03DC)
INFO: WMI namespace root\MSCluster not exists on SERVER NAME-SC1.
Configuration Manager Setup
4/3/2014 11:06:28 AM    988 (0x03DC)
INFO: 'Windows Deployment Tools' component of ADK is installed.
Configuration Manager Setup    4/3/2014 11:06:28 AM
988 (0x03DC)
INFO: 'Windows PE' component of ADK is installed.
Configuration Manager Setup    4/3/2014 11:06:28 AM
988 (0x03DC)
INFO: SDK server:SERVER NAME-SC1, domain:. Site Server:SERVER NAME-, Domain:
Configuration Manager Setup    4/3/2014 11:06:28 AM
988 (0x03DC)
INFO: SERVER NAME is a 64 bit operating system.
Configuration Manager Setup    4/3/2014 11:06:28 AM
988 (0x03DC)

SCCM 2012 Report Issue

Hello,
I'm very new to SQL reporting so if this isn't the right place to ask please point in the right place. I'm comfortable enough to go into SQL Management Studio and look at the views to pull what I want for data, but when it comes to making it into a report is
where I'm still learning. I can make a report and inject the code and boom I got data but with this query I want it to only query against the selected device collection from the drop down ( I can deal with hardcoding a device collection id). I found a canned
report that has a drop drop of collections and can't put my head around what I need to do so this query doesn't query every device but rather the collection I pick in the drop down.
Can anyone give me some pointers on what to do?
SELECT        dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System], dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [Service Pack], dbo.v_GS_COMPUTER_SYSTEM.Manufacturer0 AS Manufacturer,
                         dbo.v_GS_COMPUTER_SYSTEM.Model0 AS Model, dbo.v_GS_X86_PC_MEMORY.TotalPhysicalMemory0 AS [Total Memory (KBytes)],
dbo.v_GS_PROCESSOR.NormSpeed0 AS [Processor Speed (GHz)],
                         dbo.v_GS_LOGICAL_DISK.Description0 AS [Logical Disk Description], dbo.v_GS_LOGICAL_DISK.DeviceID0 AS [Logical Disk
ID], dbo.v_GS_LOGICAL_DISK.Size0 AS [Logical Disk Size],
                         dbo.v_GS_PC_BIOS.SerialNumber0 AS [Serial Number], dbo.v_R_System.AD_Site_Name0 AS [AD Site], dbo.v_R_System.Netbios_Name0
AS [NetBIOS Name]
FROM            dbo.v_R_System INNER JOIN
                         dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID INNER JOIN
                         dbo.v_GS_PC_BIOS ON dbo.v_GS_OPERATING_SYSTEM.ResourceID = dbo.v_GS_PC_BIOS.ResourceID INNER JOIN
                         dbo.v_GS_SYSTEM_ENCLOSURE_UNIQUE ON dbo.v_GS_PC_BIOS.ResourceID = dbo.v_GS_SYSTEM_ENCLOSURE_UNIQUE.ResourceID INNER
JOIN
                         dbo.v_GS_COMPUTER_SYSTEM ON dbo.v_GS_SYSTEM_ENCLOSURE_UNIQUE.ResourceID = dbo.v_GS_COMPUTER_SYSTEM.ResourceID INNER
JOIN
                         dbo.v_GS_X86_PC_MEMORY ON dbo.v_GS_COMPUTER_SYSTEM.ResourceID = dbo.v_GS_X86_PC_MEMORY.ResourceID INNER JOIN
                         dbo.v_GS_PROCESSOR ON dbo.v_GS_X86_PC_MEMORY.ResourceID = dbo.v_GS_PROCESSOR.ResourceID INNER JOIN
                         dbo.v_GS_OPERATING_SYSTEM AS v_GS_OPERATING_SYSTEM_1 ON dbo.v_GS_PROCESSOR.ResourceID = v_GS_OPERATING_SYSTEM_1.ResourceID
INNER JOIN
                         dbo.v_GS_LOGICAL_DISK ON v_GS_OPERATING_SYSTEM_1.ResourceID = dbo.v_GS_LOGICAL_DISK.ResourceID

I could say use a variable, but that would probably still be a bit vague. I think the following link provides a nice example of how you could do this:
http://asithadesilva.wordpress.com/2013/04/01/how-to-prompt-collection-to-a-report-in-sccm-2012/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 WSUS Sync Issue

Hello,
Our Syncs are currently failing because there's too many failure updates due to EUAs. Is there a way I can increase the threshold so it will just continue on?
Error: The Microsoft Software License Terms have not been completely downloaded and~~cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById $$<SMS_WSUS_SYNC_MANAGER><03-06-2014 15:26:38.674+300><thread=7604
(0x1DB4)>

There is apparently a hotfix available for this issue which might be worth a try if you encounter this issue when proxy credentials are required
http://support.microsoft.com/kb/2838998
there is also a workaround to set the proxy account details in IE, but in the Site System properties only have "Use a proxy server when synchronizing internet sourced information".
Leave "Use Credentials to connect to the proxy server" blank.

SCCM 2012 - WSUS Cleanup

Hello,
I'm tried to find what I needed online but wasn't able to find a resource that wasn't a third party script. I heard of WSUS cleanup utility that comes with SCCM/WSUS, is this true? I would like to have our expired/superseded updates removed from the console
as part of a manual maintenance.
I know the "WSUS" Console has a link to a utility but I was under the impression that there is one specifically for WSUS in SCCM.
EDIT:
Will SCCM automatically remove the expired updates on a 7 day cycle?

Hope this helps
http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
Cheers
Paul | sccmentor.wordpress.com

SCCM 2012 Client issues

Hi,
I am having issues with not all the SCCM client actions appearing in my clients.
So it might start at 11 actions - then drop down the 5 actions then go back up to 6 and then after a day go to 11. So this happens
after an OSD build. So I might build 12 machines at a site and get 4 with this issue. As well some machines will take an extended
time to install the same app from the same collection. Some will quickly others will take a few hours. (We have
machine policy set to 1 hour). And the machines are pre-populated in the SCCM collection.
BTW the task sequence to build the OS does complete successfully - so what you are seeing below is after the osd task sequence
ends.
However they do seem to share the following error in the location services.log
Unable to retrieve AD forest + domain membership
So things seem to go south from this point onwards.
Unable to retrieve AD forest + domain membership LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Retrieved lookup MP [Server1.acme.com] from Registry LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Attempting to retrieve lookup MP(s) from AD LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
No lookup MP(s) from AD LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Attempting to retrieve lookup MP(s) from DNS LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Using default DNS suffix acme.com LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Attempting to retrieve default management points from DNS LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Failed to retrieve DNS service record using _mssms_mp_b03._tcp.acme.com lookup. DNS returned error 10051 LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
No lookup MP(s) from DNS LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Attempting to retrieve site information from lookup MP(s) via HTTP LocationServices 18/06/2014 12:19:20 PM 2904 (0x0B58)
Failed to send site information Location Request Message to Server1.acme.com LocationServices 18/06/2014 12:19:21 PM 2904 (0x0B58)
Failed to refresh security settings over MP with error 0x80004005. LocationServices 18/06/2014 12:19:21 PM 2904 (0x0B58)
If the client actions are removed I see things like:
I can then see in the PolicyAgentProvider.log things like this:
--- [1] __InstanceDeletionEvent settings change on object CCM_ClientActions.ActionID="{00000000-0000-0000-0000-000000000106}". PolicyAgentProvider 18/06/2014 12:28:36 PM 3984 (0x0F90)
--- [1] __InstanceDeletionEvent settings change on object CCM_ClientActions.ActionID="{00000000-0000-0000-0000-000000000113}". PolicyAgentProvider 18/06/2014 12:28:36 PM 3984 (0x0F90)
--- [2] __InstanceDeletionEvent settings change on object CCM_ClientActions.ActionID="{00000000-0000-0000-0000-000000000102}". PolicyAgentProvider 18/06/2014 12:28:36 PM 3984 (0x0F90)
--- [3] __InstanceDeletionEvent settings change on object CCM_ClientActions.ActionID="{00000000-0000-0000-0000-000000000108}". PolicyAgentProvider 18/06/2014 12:28:36 PM 3984 (0x0F90)
--- [4] __InstanceDeletionEvent settings change on object CCM_ClientActions.ActionID="{00000000-0000-0000-0000-000000000107}". PolicyAgentProvider 18/06/2014 12:28:36 PM 3984 (0x0F90)
--- [5] __InstanceDeletionEvent settings change on object CCM_ClientActions.ActionID="{00000000-0000-0000-0000-000000000104}". PolicyAgentProvider 18/06/2014 12:28:36 PM 3984 (0x0F90)
So we have extended the AD schema, and we don't see to have this issue at other sites.
So any suggestions?
Thanks,
Ward

This might be a known (but unsolved issue):
http://social.technet.microsoft.com/Forums/de-DE/5a82bcb3-4cde-4eb0-a016-5d4f2a60f2d7/pki-client-starts-to-intialize-then-7-minutes-later-client-agents-go-back-to-disabled-for-upwards?forum=configmanagerdeployment
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 :::WSUS Getcookie error blocking SCEP definition Scan and updates

Please advise me what could be reasons for this issue and how to resolve it. because of this client is not able to scan and retreive updates against SUP and SCEP Defintion is not getting updated. a few set of servers are facing
this issue. Another set of servers( sccm client is working fine against same SUPs.

That does not cause any issues IMHO. There should be another error later in the log. Also examine U*.log in %windir%\ccm\logs)
Torsten Meringer | http://www.mssccmfaq.de

Sccm 2012, wsus, failed to publish client

Hi
ok, we had some issues with the offline imaging injecting updates into the images after looking at some posts on here I decided to uninstall wsus take the role off the server it was on then reinstall again. we have also updated to R2 the CU1, knock on effect
from this is the client isn't being published see log below., my question is how do I get the clients matched up?
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014
07:35:38 4012 (0x0FAC)
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Failed to publish client with error = 0x80131509 SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 14/07/2014 07:35:38 4012 (0x0FAC)
Regards
Dave

To fix this issue, check solution of "El_Tex_de_Person" in below link
http://social.technet.microsoft.com/Forums/systemcenter/en-US/054075d6-6898-4a71-b152-52cb272a393c/client-will-not-publish-through-sup?forum=configmgrsetup
Also check below linkhttp://www.faqshop.com/wp/configmgr/cm12/cm12trobshoot/cm12clients/error-failed-to-publish-sms-client-to-wsus-error-0x80131622
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCCM 2012 R2 Issues

Hello,
I'm running into an issue where I would like to capture a reference image (not perform a build and capture). I understand we can use Capture media through usb or .iso, but is it possible to just create a TS just using "Capture the Reference Machine
steps?" I am not using MDT LIT 2013 yet.
Thanks,

Not if you are capturing with ConfigMgr. If you absolutely do not want the CM client on there, just capture it with MDT. You can setup a capture deployment share in minutes. Most walkthroughs out there show the build part as well, but its not hard to take
those steps out.
http://blogs.technet.com/b/askpfeplat/archive/2014/08/04/mdt-2013-part-i-mdt-configuration-capture-a-windows-server-2012-r2-base-os-image.aspx
http://gerryhampsoncm.blogspot.com/2014/03/create-customised-reference-image-with.html
Daniel Ratliff | http://www.PotentEngineer.com |
@PotentEngineer

...that no computers are registered to receive updates (Server 2012) WSUS issue

Hi
Server 2012 64-bit WSUS install
I have trolled as many forum posts as possible but they seem to relate to older versions of Windows OS.
I have clicked the "To set up a client computer" and followed all the steps to create a GPO etc.
However the computers on the domain still look to the internet for their updates and not the WSUS server despite the policy in place.
WSUS is sync and I have 1987 security updates waiting, 626 critical updates waiting etc.
I have approved 562 updates and declined 1338 so far.
I have created 8 separate computer groups.
What can I do to get my domain computers looking to the WSUS server to receive their updates?
Many thanks
Leo

I would suggest starting with
Update and Configure the Automatic Updates Client Computer in the WSUS Deployment Guide, and the
Step-by-Step Guide to Understanding the Group Policy Feature Set.
The links provided point to solutions for much older OS. I am running a Windows 2012 Server environment with Windows 8 OS on client PC's. All the data provided on the link is for Server 2000/2003 and Windows XP. Must I assume that nothing has changed in terms
of registry values and methods of solution?
Very little has changed, the principles are the same, the Admin UI has evolved/modernised somewhat.
Windows8 does have a slightly changed auto-updating behaviour (relating to the post-install-restart behaviour) , but this is able to be modified with a GP setting.
The main settings for a client, continue to be controlled by the same registry settings (keys/values), and this can be configured by GP, and the resultant settings can be observed in the registry.
The applied settings, are consumed by the WUAgent and output to the windowsupdate.log, so it's easy to confirm if your GP settings are being applied correctly as expected.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

[SCCM 2012 SP1 W2K8R2] SUP not in Sync with WSUS settings (Language)

Hi All,
I have almost identical production and test SCCM environment.
After I setup SUP on both production and test environment SUP Language settings are not replicated to WSUS and cause WSUS/SCCM to Sync all languages.
SCCM 2012:
WSUS:
Any idea how to fix this?
Thank you in advance.
Regards,

Hi,
There is nothing to fix, it looks exactly the same in my environment. The updates are not downloaded using WSUS it is downloaded using either the SCCM console or the SCCM Primary Site server if you use and ADR and when you download the updates the settings
are beeing honoured.
So this is expected behaviour.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

WSUS Issues in SCCM 2012 environment

Hi Folks
I have a WSUS server running in a secure environment. Because i have no access to the internet from this server i use an upstream server for my update source. We have used another WSUS server as our upstream box for a while without issue but our company
has now gone to SCCM 2012 and i so i am now using this as my update source. This works well with synchronisations working without issue.
My problem is that within the wsus console the computers are showing with updates available but when i go to the computer and run windows update it states no updates are available. also looking in the windowsUpdate logs it states 0 updates found!!
I thought this was because i was using a w2008R2 wsus server so i have built another wsus server based on w2012r2 and this has exactly the same results. if i point the server back to use my other wsus server as an upstream server it all works and updates
are available on the computers.
Has anybody else had this issue and more importantly is there a fix? i dont want to use sccm for updates direct so i need to get this working.
my computers looking for updates are all w2008r2. my wsus server is w2008r2 and i also have a w2012r2 wsus server for testing. the sccm 2012 server is based on w2012r2 box all are x64
thanks

Hi,
>>My problem is that within the wsus console the computers are showing with updates available but when i go to the computer and run windows update it states no updates are available.
Please make sure that the Update is approved for the specific group and the client are in the correct group.
Beside, please check if the update file has been downloaded on the WSUS server. The update will be available until it has been downloaded.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SCCM 2012 - WSUS Issue

Similar Messages

Maybe you are looking for