SCCM 2012R2 PXE Boot Selection?
PXE Use to be so easy with MDT, Select the version of the Boot.wim file (32/64Bit) and go..
But now SCCM Chooses for us, and when you deploy a 32bit OS, Tool, or Setting to a collection, than Everything inside of that collection boots to 32bit PXE - ultimately failing the TS because its not 64Bit.
Any way to force SCCM to give you the option of 32Bit or 64Bit before it downloads and mounts it?
Hi,
I would say that Johans example only works for MDT and not ConfigMgr. There is no such option as when you boot you have already started on the wrong boot file from the PXE server. Where does it fail? You can with the exeption of UEFI computers boot on a
x86 image and deploy an x64 image.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
Similar Messages
-
My test machines cannot PXE boot.
My lab environment is very simple:
10.10.0.0/24 subnet
10.10.0.5 = Server2012, DHCP, DNS, SQL Server 2008 R2 Sp2
10.10.0.7 = Server2012, SCCM2012
All machines are Oracle VM Box virtual machines connecting through the same virtual network.
Setup the PXE service from DP properties. I let SCCM install WDS. WDS in Server
Manager does not have a server node, but the WDS service is running. DP PXE tab is configured as follows:
"Enable PXE support for clients" is checked
"Allow this distribution point to respond to incoming PXE requests" is checked
"Enable unknown computer support" is checked
"Require a password when computers use PXE" is not checked
"User device affinity" is set to "Allow user device affinity with automatic approval"
PXE is configured to respond on all network interfaces
The PXE server response delay is 0 seconds
The DHCP server has options configured as follows:
Option 66: 10.10.0.7
Option 67: smsboot\x86\wdsnbp.com
Both DP and MP on SCCM server are configured for HTTP.
Both x86 and x64 boot images have been distributed to DP. The media was updated after
PXE was enabled on the DP.
Both x86 and x64 boot images have "Deploy this image from the PXE service point" enabled on the Data Source tab of their properties
SMSPXE.Log
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
file="database.cpp:483">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: No boot action. Aborted.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
file="database.cpp:483">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: Not serviced.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="database.cpp:483">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
<![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
file="database.cpp:483">Resource ID is already present in the Unknown Computer (Windows 7) Properties please look into it and
OSD Task Sequences is there :(. -
SCCM WDS PXE Boot Authentication
Hi All,
The ability to do domain authentication for a PXE boot in RIS could be achieved by modifying the security directly on the image folder on the RIS server - however, I can't seem to implement the same access control in SCCM 2007 SP1 using WDS.
I have set up the capability to build bare metal machines using the OS Deployment feature in SCCM. The image process is advertised to “All Unknown Computers” and starts with the “builder” hitting F12 on the workstation. The boot image is loaded from the DP share and then the process begins.
My question is: How can I protect the PXE boot process by having the system request a domain Username and Password in order to begin the PXE boot process and also limit who can see the advertisements for the avialable images.
Thanks,
philHi,
You can specify a password for computers that boot to PXE.
For more info :
http://technet.microsoft.com/en-us/library/bb680668.aspx
http://blogs.technet.com/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
http://technet.microsoft.com/en-us/library/bb632767.aspx
Regards.
Bechir Gharbi. MCSA, MCSE M+S, MCITP Server/Enterprise Administrator, MCT, MCTS Configuration Manager/Forefront -
Hi All,
I have some weird issue in which i am trying to image Esprimo C720 desktop.
It is working perfectly fine if i create a standalone image via USB and build it.
But when i try to PXE boot the same device, it takes ip and boots up after windows screen it restarts. I thought it wud be network drivers and i have updated the same in winpe but still it doesnt work.
I feel Esprimo C720 is not supported for PXE boot. Can any one advice me if you wud have come across this issue
Regards, PratapHi,
I recommend you check the log file smsts.log.
This can be found in one of several locations depending on the progress of the build and the architecture of the OS:
Windows PE before HDD format: x:\windows\temp\smstslog\smsts.log
Windows PE after HDD format: x:\smstslog\smsts.log and copied to c:\_SMSTaskSequence\Logs\Smstslog\smsts.log
Full version Windows before SCCM agent installed: c:\_SMSTaskSequence\Logs\Smstslog\smsts.log
Full version Windows after SCCM agent installed: c:\windows\system32\ccm\logs\Smstslog\smsts.log
Full version Windows (x64) after SCCM agent installed: c:\windows\sysWOW64\ccm\logs\Smstslog\smsts.log
After Task Sequence has finished running: c:\windows\system32\ccm\logs\smsts.log
After Task Sequence has finished running (x64): c:\windows\sysWOW64\ccm\logs\smsts.log
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi Everyone,
I'm trying to deploy SCCM2012R2 task sequence via PXE with IpHelpers.
I've configured the IPHelpers to point to the SCCM DP PXE and the DHCP, but nothing happen.
Has someone a quick guide on how to configure SCCM2012 and iphelper?Hi,
Have you resolved this issue? If not, please try to use Network Monitor to check whether the IP Helper works fine.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello All,
Please I need help! I have not seen the above error without relationship to two of the known causes for sometime during a Windows 7 osd in an SCCM 2012 R2 environment with a remote DP/PXE server. I understand this error: to occur when the boot images
does not have "Network drivers in the past Winpe version ( i.e. 3.0, 4.0), not Winpe 5.0 which has all the Network and storage drivers for Windows 7" or when Port fast is not enabled on the switch port the pxe device is plugged into. These two causes
stated here have been verified and confirmed not to be the cause in this case within the environment. The PXE boot device has ip-address (verified using ip-config, diskpart as well reveals the disk is online) and can ping the wds/pxe server and the sccm server.
Port fast is enabled on the switch port the device is plugged into. I am stuck on this one; as I could not ascertain the cause on this occasion.
Please see details below and I welcome any help any body can offer, thanks in advance guys!
Client – Winpe x64
Server - Windows Server 2008 R2 configured as a PXE / WDS / SCCM DP
Network - both devices on the same subnet
Problem: Client performs PXE boot, downloads Winpe without problems. Client then tries to download .var file. This is not successful and TFTP timeout is received. Error code in
smsts.log states:
<![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.285+480"
date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:13:57.332+480" date="07-01-2014" component="TSPxe" context="" type="0"
thread="376" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
date="07-01-2014" component="TSPxe" context="" type="1" thread="376" file="commandline.cpp:827">
<![LOG[Process completed with exit code 1]LOG]!><time="14:14:45.379+480" date="07-01-2014" component="TSPxe" context="" type="1" thread="376"
file="commandline.cpp:1123">
Network trace is detailed below:
324994 11:47:35 04/07/2014 166.7634594
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325069 11:47:36 04/07/2014 167.7554047 svchost.exe Client Server
TFTP TFTP: Read Request - File: \SMSTemp\2014.07.03.15.45.31.0001.{549002A3-C9C9-4189-8AFE-9F8B272BECC1}.boot.var, Transfer Mode: octet
{UDP:321, IPv4:72}
325070 11:47:36 04/07/2014 167.7556504
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325071 11:47:36 04/07/2014 167.7598345
Server Client TFTP TFTP: Data - Block Number: 1 {UDP:322, IPv4:72}
325072 11:47:36 04/07/2014 167.7607151
Client Server TFTP TFTP: Acknowledgement - Block Number: 1 {UDP:322, IPv4:72}
325073 11:47:36 04/07/2014 167.7608240
Server Client TFTP TFTP: Data - Block Number: 2 {UDP:322, IPv4:72}
325074 11:47:36 04/07/2014 167.7615948
Client Server TFTP TFTP: Acknowledgement - Block Number: 2 {UDP:322, IPv4:72}
325075 11:47:36 04/07/2014 167.7616991
Server Client TFTP TFTP: Data - Block Number: 3 {UDP:322, IPv4:72}
325076 11:47:36 04/07/2014 167.7624602
Client Server TFTP TFTP: Acknowledgement - Block Number: 3 {UDP:322, IPv4:72}
325077 11:47:36 04/07/2014 167.7625635
Server Client TFTP TFTP: Data - Block Number: 4 {UDP:322, IPv4:72}
325078 11:47:36 04/07/2014 167.7629426
Client Server TFTP TFTP: Acknowledgement - Block Number: 4 {UDP:322, IPv4:72}
325079 11:47:36 04/07/2014 167.7630452
Server Client TFTP TFTP: Data - Block Number: 5 {UDP:322, IPv4:72}
325080 11:47:36 04/07/2014 167.7637927
Client Server TFTP TFTP: Acknowledgement - Block Number: 5 {UDP:322, IPv4:72}
325081 11:47:36 04/07/2014 167.7638947
Server Client TFTP TFTP: Data - Block Number: 6 {UDP:322, IPv4:72}
325082 11:47:36 04/07/2014 167.7643324
Client Server TFTP TFTP: Acknowledgement - Block Number: 6 {UDP:322, IPv4:72}
325083 11:47:36 04/07/2014 167.7644367
Server Client TFTP TFTP: Data - Block Number: 7 {UDP:322, IPv4:72}
325084 11:47:36 04/07/2014 167.7652140
Client Server TFTP TFTP: Acknowledgement - Block Number: 7 {UDP:322, IPv4:72}
325085 11:47:36 04/07/2014 167.7653183
Server Client TFTP TFTP: Data - Block Number: 8 {UDP:322, IPv4:72}
325086 11:47:36 04/07/2014 167.7660907
Client Server TFTP TFTP: Acknowledgement - Block Number: 8 {UDP:322, IPv4:72}
325087 11:47:36 04/07/2014 167.7661940
Server Client TFTP TFTP: Data - Block Number: 9 {UDP:322, IPv4:72}
325088 11:47:36 04/07/2014 167.7669372
Client Server TFTP TFTP: Acknowledgement - Block Number: 9 {UDP:322, IPv4:72}
325089 11:47:36 04/07/2014 167.7670323
Server Client TFTP TFTP: Data - Block Number: 10 {UDP:322, IPv4:72}
325090 11:47:36 04/07/2014 167.7674067
Client Server TFTP TFTP: Acknowledgement - Block Number: 10 {UDP:322, IPv4:72}
325091 11:47:36 04/07/2014 167.7674809
Server Client TFTP TFTP: Data - Block Number: 11 {UDP:322, IPv4:72}
325092 11:47:36 04/07/2014 167.7681308
Client Server TFTP TFTP: Acknowledgement - Block Number: 11 {UDP:322, IPv4:72}
325093 11:47:36 04/07/2014 167.7682056
Server Client TFTP TFTP: Data - Block Number: 12 {UDP:322, IPv4:72}
325094 11:47:36 04/07/2014 167.7685383
Client Server TFTP TFTP: Acknowledgement - Block Number: 12 {UDP:322, IPv4:72}
325095 11:47:36 04/07/2014 167.7686108
Server Client TFTP TFTP: Data - Block Number: 13 {UDP:322, IPv4:72}
325096 11:47:36 04/07/2014 167.7692475
Client Server TFTP TFTP: Acknowledgement - Block Number: 13 {UDP:322, IPv4:72}
325097 11:47:36 04/07/2014 167.7693216
Server Client TFTP TFTP: Data - Block Number: 14 {UDP:322, IPv4:72}
325098 11:47:36 04/07/2014 167.7696477
Client Server TFTP TFTP: Acknowledgement - Block Number: 14 {UDP:322, IPv4:72}
325099 11:47:36 04/07/2014 167.7697202
Server Client TFTP TFTP: Data - Block Number: 15 {UDP:322, IPv4:72}
325100 11:47:36 04/07/2014 167.7703651
Client Server TFTP TFTP: Acknowledgement - Block Number: 15 {UDP:322, IPv4:72}
325101 11:47:36 04/07/2014 167.7704386
Server Client TFTP TFTP: Data - Block Number: 16 {UDP:322, IPv4:72}
325102 11:47:36 04/07/2014 167.7707479
Client Server TFTP TFTP: Acknowledgement - Block Number: 16 {UDP:322, IPv4:72}
325103 11:47:36 04/07/2014 167.7708214
Server Client TFTP TFTP: Data - Block Number: 17 {UDP:322, IPv4:72}
325104 11:47:36 04/07/2014 167.7714862
Client Server TFTP TFTP: Acknowledgement - Block Number: 17 {UDP:322, IPv4:72}
325105 11:47:36 04/07/2014 167.7715603
Server Client TFTP TFTP: Data - Block Number: 18 {UDP:322, IPv4:72}
325106 11:47:36 04/07/2014 167.7718715
Client Server TFTP TFTP: Acknowledgement - Block Number: 18 {UDP:322, IPv4:72}
325107 11:47:36 04/07/2014 167.7719450
Server Client TFTP TFTP: Data - Block Number: 19 {UDP:322, IPv4:72}
325108 11:47:36 04/07/2014 167.7726029
Client Server TFTP TFTP: Acknowledgement - Block Number: 19 {UDP:322, IPv4:72}
325109 11:47:36 04/07/2014 167.7726800
Server Client TFTP TFTP: Data - Block Number: 20 {UDP:322, IPv4:72}
325110 11:47:36 04/07/2014 167.7733471
Client Server TFTP TFTP: Acknowledgement - Block Number: 20 {UDP:322, IPv4:72}
325111 11:47:36 04/07/2014 167.7734203
Server Client TFTP TFTP: Data - Block Number: 21 {UDP:322, IPv4:72}
325112 11:47:36 04/07/2014 167.7737411
Client Server TFTP TFTP: Acknowledgement - Block Number: 21 {UDP:322, IPv4:72}
325113 11:47:36 04/07/2014 167.7738142
Server Client TFTP TFTP: Data - Block Number: 22 {UDP:322, IPv4:72}
325114 11:47:36 04/07/2014 167.7744648
Client Server TFTP TFTP: Acknowledgement - Block Number: 22 {UDP:322, IPv4:72}
325115 11:47:36 04/07/2014 167.7745386
Server Client TFTP TFTP: Data - Block Number: 23 {UDP:322, IPv4:72}
325116 11:47:36 04/07/2014 167.7748657
Client Server TFTP TFTP: Acknowledgement - Block Number: 23 {UDP:322, IPv4:72}
325117 11:47:36 04/07/2014 167.7749395
Server Client TFTP TFTP: Data - Block Number: 24 {UDP:322, IPv4:72}
325118 11:47:36 04/07/2014 167.7755914
Client Server TFTP TFTP: Acknowledgement - Block Number: 24 {UDP:322, IPv4:72}
325119 11:47:36 04/07/2014 167.7756649
Server Client TFTP TFTP: Data - Block Number: 25 {UDP:322, IPv4:72}
325120 11:47:36 04/07/2014 167.7760109
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
325277 11:47:37 04/07/2014 168.7554246
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
325278 11:47:37 04/07/2014 168.7709396
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
325397 11:47:39 04/07/2014 170.7708892
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
326185 11:47:40 04/07/2014 171.7552905
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:320, UDP:319, IPv4:72}
327030 11:47:43 04/07/2014 174.7588879
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
327031 11:47:43 04/07/2014 174.7707730
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
327178 11:47:44 04/07/2014 175.7552028
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
327510 11:47:45 04/07/2014 176.7551962
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328598 11:47:48 04/07/2014 179.7552497
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328630 11:47:51 04/07/2014 182.7551309
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328631 11:47:51 04/07/2014 182.7707620
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
328658 11:47:54 04/07/2014 185.7550375
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328669 11:47:57 04/07/2014 188.7709719
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328677 11:47:59 04/07/2014 190.7862445
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
328690 11:48:00 04/07/2014 191.7708666
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328717 11:48:03 04/07/2014 194.7706918
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328730 11:48:06 04/07/2014 197.7704623
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
328736 11:48:07 04/07/2014 198.7861669
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
329217 11:48:09 04/07/2014 200.7705229
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329420 11:48:12 04/07/2014 203.7704633
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329795 11:48:15 04/07/2014 206.7704298
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
329796 11:48:15 04/07/2014 206.7858646
Client Server TFTP TFTP: Acknowledgement - Block Number: 25 {UDP:322, IPv4:72}
329990 11:48:18 04/07/2014 209.7704360
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
330005 11:48:21 04/07/2014 212.7703291
Client Server AuthIP AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
440 {AuthIP:419, UDP:319, IPv4:72}
330014 11:48:23 04/07/2014 214.7862410
Client Server TFTP TFTP: Error - ErrorCode: 0, ErrorMessage: timeout on receive {UDP:322, IPv4:72}Hi,
According to the logs, this issue still should be related to network driver. It failed after network driver initialized. Please try to use another network driver.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCCM 2012R2 osd pxe-e32 tftp open timeout
I have SCCM 2012 R2 standalone primary site on windows server 2012 and i have Cisco dhcp server i configured the distribution point for pxe boot to
work with osd i added boot images and configured them and the network guy configured the next server option to point to sccm server on the dhcp and the pxe boot fails we tried option 66 it fails also then we tried option 67 and it fails again we always get
the same error message pxe-32 : tftp open timeout.
option 67 SMSBoot\x86\wdsnbp.com,
and the 66 the ip of the sccm server================= PXE Provider loaded. =====================
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Machine is running Windows Longhorn. (NTVersion=0X602, ServicePack=0)
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
MAC Ignore List Filename in registry is empty
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Begin validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Completed validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Initializing PXEPerfObject. SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
HTTP is selected for Client. The current state is 0.
SMSPXE 3/17/2015 1:01:26 PM
6448 (0x1930)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
Adding PR100002.4 SMSPXE
3/17/2015 1:01:26 PM 6448 (0x1930)
Adding PR100005.5 SMSPXE
3/17/2015 1:01:31 PM 6448 (0x1930)
Adding PR100022.7 SMSPXE
3/17/2015 1:01:35 PM 6448 (0x1930)
Adding PR100023.6 SMSPXE
3/17/2015 1:01:42 PM 6448 (0x1930)
Adding PR100028.3 SMSPXE
3/17/2015 1:01:49 PM 6448 (0x1930)
Found new image PR100002 SMSPXE
3/17/2015 1:01:53 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:53 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:53 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
PackageID: PR100002
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:53 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:53 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.53.01.{CC5749B0-CB0F-42A8-989E-A22A66E5E783}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.53.01.{CC5749B0-CB0F-42A8-989E-A22A66E5E783}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Found new image PR100005 SMSPXE
3/17/2015 1:01:54 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
PackageID: PR100005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:54 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:54 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.54.02.{BA52147D-AED6-476C-AA0B-576C47A3D075}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.54.02.{BA52147D-AED6-476C-AA0B-576C47A3D075}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found new image PR100022 SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
PackageID: PR100022
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.03.{8256887E-013C-4D4A-9644-68C821493E75}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.03.{8256887E-013C-4D4A-9644-68C821493E75}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found new image PR100023 SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
PackageID: PR100023
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:55 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:55 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.04.{886544D5-02B4-4B65-9753-534946E3C3AD}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.55.04.{886544D5-02B4-4B65-9753-534946E3C3AD}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Found new image PR100028 SMSPXE
3/17/2015 1:01:56 PM 6448 (0x1930)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Opening image file C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
Found Image file: C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim
PackageID: PR100028
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:56 PM 6448 (0x1930)
Closing image file C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim
SMSPXE 3/17/2015 1:01:56 PM
6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Failed adding image C:\RemoteInstall\SMSImages\PR100028\boot.PR100028.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.56.05.{9F037EC7-2A5E-4662-B7E9-94C993D11251}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.56.05.{9F037EC7-2A5E-4662-B7E9-94C993D11251}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Found new image PR100002 SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
PackageID: PR100002
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Begin validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
Completed validation of Certificate [Thumbprint FA4174562457D153C43E3D98299DDEB1CFEC59DC] issued to '0a73979c-2e12-4111-b880-1eee6cf2ef91'
SMSPXE 3/17/2015 1:01:57 PM
6448 (0x1930)
PXE Provider finished loading. SMSPXE
3/17/2015 1:01:57 PM 6448 (0x1930)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Failed adding image C:\RemoteInstall\SMSImages\PR100002\boot.PR100002.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.06.{9BB909FC-0E10-456D-95C7-C81FA46A3806}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.06.{9BB909FC-0E10-456D-95C7-C81FA46A3806}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Found new image PR100005 SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
PackageID: PR100005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:57 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim
SMSPXE 3/17/2015 1:01:57 PM
5960 (0x1748)
InstallBootFilesForImage failed. 0x80004005
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Warning: Failed to copy the needed boot binaries from the boot image C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim.
The operation completed successfully. (Error: 00000000; Source: Windows)
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Failed adding image C:\RemoteInstall\SMSImages\PR100005\boot.PR100005.wim. Will Retry..
Unspecified error (Error: 80004005; Source: Windows)
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.07.{326D786F-BB78-4BED-9557-9A3CA5BAEA9F}.boot.bcd deleted.
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
File C:\RemoteInstall\SMSTemp\2015.03.17.13.01.57.07.{326D786F-BB78-4BED-9557-9A3CA5BAEA9F}.boot.bcd.log deleted.
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Found new image PR100022 SMSPXE
3/17/2015 1:01:58 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
PackageID: PR100022
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:58 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100022\boot.PR100022.wim
SMSPXE 3/17/2015 1:01:58 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\pxeboot.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\pxeboot.n12' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\bootmgr.exe' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\wdsnbp.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\abortpxe.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\abortpxe.com' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\PXE\wdsmgfw.efi' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\EFI\bootmgfw.efi' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\segmono_boot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\segoe_slboot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\segoen_slboot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SMSTempBootFiles\PR100022\WINDOWS\Boot\Fonts\wgl4_boot.ttf' does not exist. Ignore it
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Found new image PR100023 SMSPXE
3/17/2015 1:01:59 PM 5960 (0x1748)
Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\wimgapi.dll
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Opening image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Found Image file: C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
PackageID: PR100023
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
3/17/2015 1:01:59 PM 5960 (0x1748)
Closing image file C:\RemoteInstall\SMSImages\PR100023\boot.PR100023.wim
SMSPXE 3/17/2015 1:01:59 PM
5960 (0x1748)
Source file 'C:\RemoteInstall\SM
AYehia -
@arriettyYou can try this driver, it has solved the problem I had with pxe boot on this model https://drive.google.com/file/d/0B6iKWIN8V5CVdWE3N1hsMmVydHM/edit?usp=sharing We forget very easily that you do not need the driver for the version of Windows you will deploy, but that you must use the driver for the version of Windows that WinPE is built on, in this case it's Windows 8/2012. In SCCM 2012 (not R2) is WinPE 4.0 (Windows 8/2012) and is WinPE 5.0 in R2 (Windows 8.1/2012 R2)
After messing with it for some time now, I went as far as opening up the WinPE.wim and add every folder and driver available from Intel using 18.8 and still get invalid nic drivers. I am currently using SCCM 2012 (non-CU1) and I understand I get an error when I just try to import that one and only e1d63x64.inf. Verified in the Windows 8 Device Manager that it is calling for that specific driver type. The following error:The selected driver is not applicable to any supported platforms. Now that I am unstanding perhaps I am not able to Import due to Windows 8 support but what alarms me is that I am not trying to Image Windows 8, I am using Windows 7 deployment only.... Other report that is how to go around resolving it, not working for me on MTM 10A9. Today I used dsim tool to add the .inf to the boot image, and replaced the existing boot.wim on the USB stick with the one i created, still getting the same results: No nic driver available. Anyone from Lenovo have a word on this where I can use these drivers like the other 95% of your product works fine on? Any suggestion would help. Eric
-
Lenovo X1 Carbon PXe boot errors with SCCM 2007
I know there are many posts on this and I've gone through them all, but I am still having issues PXe booting a X1. I have a USB ethernet dongle (the new type with the rounded edge). the part number is 0b67708. It's branded Lenovo but when I pxe it recognises it as ASIX AX88772b. So far so good. It picks up an IP from DHCP ok, recognises the hardware as x64 and then tries to download the \smsboot\boot.sdi file from the SCCM 2007 server. It waits for 20 seconds then falls over with the following:
Status: 0xc0000001 - Info: The boot selection failed because a required device is inaccessible.
Now, I have the the following drivers in the boot.wim file:
x86 -
1. Lenovo USB2.0 Ethernet Adapter 5.12.7.0
2. PCI bus
3. Intel ICHR/DO/DH SATA AHCI Controller
4. Intel USB 3.0 Root Hub
5. Intel USB 3.0 eXtensible Host Controller
x64 -
1. Lenovo USB 2.0 Ethernet Adapter 5.14.4.0
2. PCI Bus
3. Intel ICHR/DO/DH SATA AHCI Controller - 2821
4. Intel USB 3.0 Root Hub
5. Intel USB 3.0 eXtensible Host Controller
I have tried using the ASIX drivers, all previous driver version, adding in the mass storage drivers, adding in the USB 3.0 drivers, praying to the PXe gods but nothing works.
All other hardware works fine. Any suggestions greatly welcomed.
Cheers - Mark.Make a USB recovery drive before reinstalling.Thats the only option with a preload. With a retail serial number, you can download an iso with the upgrade assistant.
Also, how much ram do you have. If yopu have more than 4GB, you will need 64 bit XP, or the performance will take a hit. I tried XP on my W530, but I had to change several settings in the BIOS/UEFI.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac. -
PXE boot issue with DHCP and SCCM server on different subnets
I'm working with a client on the operating system deployment module of SCCM.
Their network configuration currently has a single large subnet for client
computers with a DHCP server on the same subnet. The SCCM subnet is
configured on a seperate subnet with no DHCP server on the subnet. We want to
configure client computers to be able to boot using the PXE client to deploy
OS images to the machines but can not get PXE-boot to work correctly.
Also, the client does not want to make changes to their network
infrastructure routers or switches to remedy this problem. Are there settings
on the DHCP or SCCM servers we can implement to make this work? If so, what
needs to be installed or configured on each server. We currently already have
WDS installed on the SCCM server and the SCCM server is configured as a PXE
Service Point within SCCM. Both WDS and the PXE Service Point seem to be working fine.
Any help would be appreciated.
Thanks,
GaryI am Brazilian,
sorry for wrong english
My DHCP is on linux,
in my own structure VLANS
The system center is on the network
10.0.4.0/24
The machines on the network 10.0.5.0/24
The problem is that the machines that
are not on the same network system center
can not boot
I tried configuring / etc/dhcp3/dhcpd.conf
follows
option vendor-class-identifier "PXEClient";
option bootfile-name "\
\ SMSBOOT \ \ x86 \
\ wdsnbp.com";
option tftp-server-name
"10.0.4.101"; ---->
IP server
But it did not work, anyone know
how to configure? -
Machines cannot PXE boot using SCCM 2012 DP
There are a lot of posts about PXE boot, but I can't find the common thread to tie them all together. My test machines cannot PXE boot.
My lab environment is very simple:
10.10.0.0/24 subnet
10.10.0.10 = W2k8 R2 DC, DHCP, DNS
10.10.0.11 = SCCM2012 (on W2k8R2 with SQL Server 2008 SP3 and CU4)
All machines are Hyper-V virtual machines connecting through the same virtual network.
Setup the PXE service from DP properties. I let SCCM install WDS. WDS in Server Manager does not have a server node, but the WDS service is running. DP PXE tab is configured as follows:
"Enable PXE support for clients" is checked
"Allow this distribution point to resond to incoming PXE requests" is checked
"Enable unknown computer support" is checked
"Require a password when computers use PXE" is not checked
"User device affinity" is set to "Allow user device affinity with automatic approval"
PXE is configured to respond on all network interfaces
The PXE server response delay is 0 seconds
The DHCP server has options configured as follows:
Option 66: 10.10.0.11
Option 67: smsboot\x86\wdsnbp.com
Both DP and MP on SCCM server are configured for HTTP.
Both x86 and x64 boot images have been distributed to DP. The media was updated after PXE was enabled on the DP.
Both x86 and x64 boot images have "Deploy this image from the PXE service point" enabled on the Data Source tab of their properties.
I have tried both unknown computer task sequence and a computer import task sequence (old computer association). They all end in abortpxe.com
Complete PXE response is as follows:
=================================================================
PXE Network Boot 03.23.2009
(C) Copyright 2009 Microsoft Corporation, All Rights Reserved
CLIENT MAC ADDR: 00 DD CC BB AA 00 GUID: 532D27E3-A184-4D27-A822-30A8B6F4A39D
CLIENT IP: 10.10.0.106 MASK: 255.255.255.0 DHCP IP: 10.10.0.10
GATEWAY IP: 10.10.0.5
Download WDSNBP...
Architecture: x64
WDSNBP started using DHCP Referral.
Contacting Server: 10.10.0.11 (Gateway: 0.0.0.0)
The detalis below show the information relating to the PXE boot request for
this computer. Please provide these details to your Windows Deployment Services
Administrator so that this request can be approved.
Pending Request ID: 6
Contacting Server: 10.10.0.11
TFTP Download: smsboot\x64\abortpxe.com
PXE Boot aborted. Booting to next device
===========================================================
From the smspxe.log:
]LOG]!><time="16:31:39.445+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:6402">
<![LOG[Client Identity: {C9929C4D-735A-4973-8659-4D3D5D5E4F92}]LOG]!><time="16:31:39.445+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:6428">
<![LOG[Set enterpirse certificate in transport]LOG]!><time="16:31:39.480+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9207">
<![LOG[Set media certificate in transport]LOG]!><time="16:31:39.505+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9220">
<![LOG[Set authenticator in transport]LOG]!><time="16:31:39.505+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[Set authenticator in transport]LOG]!><time="16:31:39.533+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[PXE::CBootImageManager::FindMatchingArchitectureBootImage]LOG]!><time="16:31:39.553+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="bootimagemgr.cpp:1736">
<![LOG[PXE::CBootImageManager::FindMatchingArchitectureBootImage]LOG]!><time="16:32:00.963+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="bootimagemgr.cpp:1736">
<![LOG[Set enterpirse certificate in transport]LOG]!><time="16:32:01.008+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9207">
<![LOG[Set media certificate in transport]LOG]!><time="16:32:01.027+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9220">
<![LOG[Set authenticator in transport]LOG]!><time="16:32:01.027+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[Set authenticator in transport]LOG]!><time="16:32:01.084+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777218" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID=""
LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
]LOG]!><time="16:32:01.108+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:6402">
<![LOG[Client Identity: {C9929C4D-735A-4973-8659-4D3D5D5E4F92}]LOG]!><time="16:32:01.108+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:6428">
<![LOG[Set enterpirse certificate in transport]LOG]!><time="16:32:01.151+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9207">
<![LOG[Set media certificate in transport]LOG]!><time="16:32:01.174+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9220">
<![LOG[Set authenticator in transport]LOG]!><time="16:32:01.174+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[Set authenticator in transport]LOG]!><time="16:32:01.209+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[PXE::CBootImageManager::FindMatchingArchitectureBootImage]LOG]!><time="16:32:05.230+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="bootimagemgr.cpp:1736">
<![LOG[Set enterpirse certificate in transport]LOG]!><time="16:32:05.290+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9207">
<![LOG[Set media certificate in transport]LOG]!><time="16:32:05.325+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:9220">
<![LOG[Set authenticator in transport]LOG]!><time="16:32:05.325+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[Set authenticator in transport]LOG]!><time="16:32:05.366+240" date="05-06-2012" component="SMSPXE" context="" type="1" thread="3600" file="libsmsmessaging.cpp:7592">
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777218" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction LastPXEAdvertisementID=""
LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
=============================================================================================
I've been hammering this for about 10 hours now (or to be honest, it's been hammering me) and it must be something very simple I'm missing. I have a feeling that I'm doing something I used to do in 2007 and whatever that is, it does not work in
2012.
If I connect using boot media, Task Sequences execute perfectly.
TIA,
TomOption 66: 10.10.0.11
Option 67: smsboot\x86\wdsnbp.com
Pending Request ID: 6
Contacting Server: 10.10.0.11
TFTP Download: smsboot\x64\abortpxe.com
PXE Boot aborted. Booting to next device
<![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777218" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
Those options are fine when using DHCP options. They must be configured right because ConfigMgr does send a reply to the client ("abortpxe"). It basically tells you that ConfigMgr knows the MAC address and/or SMBIOSGUID of the client, but cannot find
a deployment for it.
Just find ResourceID 16777218 in the console (you might have to add the ResourceID column) and double check if there's an deployment available (properties of the client with resourceID 16777218).
Torsten Meringer | http://www.mssccmfaq.de
Your answer really helped me. I was searching for 2 days trying to find a computer in Config Manager. Your suggestion to "Just
find ResourceID 16777218 in the console (you might have to add the ResourceID column) and double check if there" was the trick to finding the computer in Config Manager. Thanks for all of your help
Gregory Campbell System Administrator -
T61s, T60s & older model unable to PXE boot to SCCM (MAC address problem)
Hi,
We have a series of T60, T61 & older machines that are unable to PXE boot to SCCM. The T400 & X series & other newer models can boot just fine.
After checking further, we realised that only a certain range of MAC addresses are unable to pxe boot i.e
00-1A-XXXXXXX
00-1C-XXXXXXX
range.. all the other range of MAC addresses are fine to boot via network.
The error when doing network boot is "bad or missing discovery server list"
Also, we are running on SCCM 2012 at the moment. Our branch office who is running SCCM 2008 can have all the machines - regardless of models & brand boot just fine.
Any ideas? Much appreciated.did it obtain IP address from DHCP server? is DNS server address is configured in DHCP scope? can you ping using IP address?
if drivers are proper will suggest to update it in boot media & enable command line support to make it easy for deployment & troubleshooting.
Prashant Patil -
I'm trying to get PXE booting to work on our SCCM 2012 R2 server and am getting the dreaded "PXE-E53: No Boot file Name Received." DHCP server is in same subnet on a different machine, so supposedly no DHCP options or ip helpers are necessary. I'm
testing using a client VM with the legacy adapter for the NIC, and that machine PXE boots fine from our SCCM 2007 server.
When I test, I've been shutting down the SCCM 2007 server so that the 2012 machine is the only PXE server on our network.
In a nutshell, I'm trying to deploy Windows 8.1 using
this as a guide. The x86 and x64 boot images are enabled for PXE distribution and I've deployed the task sequence for the 8.1 OS image to all unknown computers. The DP shows content for the OS image and the boot images. PXE on the DP is enabled
and checkmarked to listen for PXE requests on all interfaces and for unknown computer support.
For troubleshooting I've tried unchecking all the PXE settinging in the DP, which removes WDS and then putting it back, as well as removing the MP role and putting it back (see attached snippet of SMSPXE.LOG).
I feel like I'm missing something basic here. Can anyone help?
Thanks!Thanks, Jason. Yes, the MAC addrss is the client I'm trying to PXE boot.
I've reviewed the health in the monitoring section. No issues in System Status, and in Content Status there is only one error regarding the DP trying to contact an old SCCM 2007 distribution point at a branch office. This
appears to be a leftover from the migration process from SCCM 2007. This old distribution point is no longer in use and I can't seem to find any references to it on my SCCM 2012 R2 installation. Not sure if this is significant or not.
I've attached a snippet of the error: -
SCCM 2012 R2 PXE Boot to Lenovo T540p 20BE
Can someone help me PXE Boot a Lenovo T540/T440 laptop? Is there some type of settings that need to be changed in the BIOS or something?
It keeps failing and Lenovo Phone Support could not tell me how to do it.
I performed the following per Lenovo Tech Support:
I first go into BIOS>Security>Secure Boot>Disabled
Startup>UEFI/Legacy Boot>Legacy Only
Restart>Load Setup Defaults>OS Optimized Defaults>Disabled
I press FN + F12 to network book, this appears in 1 second:
Your PC needs to be repaired
The Boot Configuration data for your PC is missing or contain errors.
File:\boot\bscd
Error Code: 0xc000000f
This occured on a brand new T540p out of the box. I am getting these on all 4 of my laptops that just arrived today. Can anyone help me out here or guide me to the right direction?
Note: I downloaded the SCCM Package drivers from Lenovo Support site and updated my Boot Images x86 and x64, still nothing.I can create an USB OSD bootable media and that works just fine but I do not want to USB Boot image 30 machines over the course of this fiscal year...sigh
-
Is it possible to PXE boot to capture a ref image in SCCM 2012?
Hello,
I've created a master image via SCCM OSD. I would like to be able to PXE boot and capture that master image. I don't want to use a capture media like USB or CDROM.
I would like to automate the capture. My current master machine isn't joined to the domain. I created a test task sequence of Build and Capture. I disabled the "Build" section. I deployed the task sequence. When I PXE boot I'm able to choose my
Task Sequence but I get all kinds of errors.
Is this idea I have even possible?
Using SCCM 2012 on Server 2012. Client machines are Win 7 Ent. and Win 8 VMs.
Thank you,
Brian
Dr. ChuckYou don't even have to deploy it to unknown computers if you introduce the VM to ConfigMgr by importing it to console with it's MAC Address. Then you do a collection "Build Master Image" and add your VM there. You can deploy Software updates (if you want
them to go with the sequence) to that collection also. Deploy your TS to the collection and PXE boot your VM.
Maybe you are looking for
-
Is it possible to send notes from an iTouch to a computer with the same email?
I have several Notes on my iTouch I would like to send to myself so that I'll be able to access them on my computer, but will this work if the iTouch and computer (Mackbook Pro) both use the same Email accounts? Assistance is much appreciated.
-
Tree node with (...)
i construct a tree with model,but the node do not display fully. i.e: node info is "node information", but it display "node infoma...". i have a Node class that log node property. In this class i override toString method, and return node's name (in o
-
How to develop a drag-and-drop feature in JSF
Can someone give me some hints about how to add a drag-and-drop featurn on a HTML page developed in JSF? For example, on Google personalized page, you can drag-and-drop some components and change their position easily. Can JSF do that, or even better
-
2 more USB 3.0 ports on all MacBook Pro laptops?
I love the Apple Laptops and Smartphones. Not a big fan of how the new Retina Display notebooks have been assembled (non-removable flash modules). I've always wondered why these notebooks only have 2 USB ports, especially since the new Retina noteboo
-
IPad's mail program doesn't load full messages (e.g. 9,5Kb)
Some of the messages are loaded partly. And there is a button "load remaining 15 Kb" (all message may be for example 27Kb). I can see full message only after clicking this button. Can't find the reason. Other messages with pictures, text (e.g. 500 Kb