SCCM 2012R2 PXEboot enabled and WDS cannot install (0x80070643)
After the new year - I get back and find out WDS is missing from the SCCM server. I have tried many things and I am at the end, not sure what else I can try!
-uninstalled Windows assessment 8.1
-removed all boot images
-rebooted, installed Windows assessment 8.1, rebooted, imported default boot.wim, configured them be used with pxe, enabled pxe on the SCCM DP.
-Manually tried to install WDS, failed with the same error message (0x80070643)
What's odd is it seems like SCCM thinks PXE is up and running according to distmgr.log When I enable PXE on the DP, I get this:
ConfigureDP SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:33 AM 6520 (0x1978)
IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:33 AM 6520 (0x1978)
IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:33 AM 6520 (0x1978)
IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:33 AM 6520 (0x1978)
IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:33 AM 6520 (0x1978)
DP registry settings have been successfully updated on CO009017.starcatholic.local SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=CO009017.starcatholic.local SITE=STT PID=1308 TID=6520 GMTDATE=Mon Jan 06 10:01:34.196 2014 ISTR0="["Display=\\CO009017.starcatholic.local\"]MSWNET:["SMS_SITE=STT"]\\CO009017.starcatholic.local\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\CO009017.starcatholic.local\"]MSWNET:["SMS_SITE=STT"]\\CO009017.starcatholic.local\" SMS_DISTRIBUTION_MANAGER 1/6/2014
3:01:34 AM 6520 (0x1978)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=CO009017.starcatholic.local SITE=STT PID=1308 TID=6520 GMTDATE=Mon Jan 06 10:01:34.238 2014 ISTR0="["Display=\\CO009017.starcatholic.local\"]MSWNET:["SMS_SITE=STT"]\\CO009017.starcatholic.local\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\CO009017.starcatholic.local\"]MSWNET:["SMS_SITE=STT"]\\CO009017.starcatholic.local\" SMS_DISTRIBUTION_MANAGER 1/6/2014
3:01:34 AM 6520 (0x1978)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
CcmInstallPXE SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
PXE provider is already installed. SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
DP monitoring task is disabed on server CO009017.starcatholic.local SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
No need to initialize monitoring task on CO009017.starcatholic.local SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
DP settings have been updated to CO009017.starcatholic.local. SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
Initialize usage gathering task on CO009017.starcatholic.local SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
IIS Version 7 SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:34 AM 6520 (0x1978)
context SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:35 AM 9248 (0x2420)
starcatholic\techstar SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:35 AM 9248 (0x2420)
Successfully saved iis settings. SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:35 AM 6520 (0x1978)
Log Location C:\inetpub\logs\LogFiles\W3SVC1 SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:35 AM 6520 (0x1978)
Successfully enabled usage gathering on the local distribution point. SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:35 AM 6520 (0x1978)
1998-01-01T00:00:00 SMS_DISTRIBUTION_MANAGER 1/6/2014 3:01:36 AM 6520 (0x1978)
Looking at the CBS.log after the failed attempt to install the WDS role:
https://skydrive.live.com/?cid=ba16ae946915e690&id=BA16AE946915E690%213120&action=Share
Here is the CBS file zipped up:
https://skydrive.live.com/?cid=ba16ae946915e690&id=BA16AE946915E690%213118&action=Share
Not sure if it's related or not but I am unable to install IE10 or KB2670838. The update goes, says all is well, server reboots, configures itself and then failed, reverts, reboots two times and comes back up with failed updates.
My CheckSUR.log looks clean:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 22.0
2014-01-08 13:52
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 841
No errors detected
I have run chkdsk /r /f, sfc /scannow - all reporting back clean.
I thought maybe it was .net 3.5 related, I uninstalled Windows Process Activation Services, tried installing updates, WDS, same issue. They all fail. Installed the latest .net 4.5.1 as well, same issue. Didn't help.
I fired up a backup from October and WDS was running on that, so it was working a few months back. Event viewer says it was working all the way up to Jan 2, 2014 and then the WDS events stop. It's like WDS got uninstalled or deleted and never to be heard
from again.
WDS Error on the day it 'left' was WDSIMGSRV Event ID 258.
The description for Event ID 258 from source WDSIMGSRV cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
0xC1030104
I know there are two things here, a few updates (ie10 that cannot be installed) and WDS failing to come back up but I have a sneaky feeling they are related somehow. If one starts to work, they both do?
Server is Windows 2008 R2 SP1, hosted on a ESXi 5.1 box, VMNICs are intel based.
Thanks for the replys!
I have installed the hotfix and the server was running on 2012R2 for a month before this happened, WDS was running, I was imaging, had no issues.
I do have KB2905002 installed on the server, I did that the day after I upgraded from SP1 to R2 after I found it took 1+ hour to image a machine.
As for this:
C:\Windows\system32>wdsutil /initialize-server /REMINST:c:\remoteinstall
'wdsutil' is not recognized as an internal or external command,
operable program or batch file.
I don't have WDSUTIL on the server, it's gone. Nothing WDS related is in C:\Windows\System32 and I can't enable the role to get it going again.
Output from Powershell:
PS C:\Users\Admin> add-windowsfeature wds
add-windowsfeature : Installation of [Windows Deployment Services] Transport Server failed. Attempt to install
Transport Server failed with error code 0x80070643. Fatal error during installation
At line:1 char:1
+ add-windowsfeature wds
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationStopped: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : FeatureMessageDetail,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureCommand
add-windowsfeature : Installation of [Windows Deployment Services] Deployment Server failed. Attempt to install
Deployment Server failed with error code 0x80070643. Fatal error during installation
At line:1 char:1
+ add-windowsfeature wds
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationStopped: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : FeatureMessageDetail,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureCommand
Success Restart Needed Exit Code Feature Result
False No Failed {Transport Server, Deployment Server}
I may have to end up calling Microsoft today - I don't know what to try anymore.
Similar Messages
-
I bought Photoshop Elements 12 and I cannot install it..It says invalid serial number and says invalid Redemption Code when I try that way. I need the program and because I have opened the box it can't be returned to the store. I have over $100 tied up in this product that I can't use. Someone said install the free trial version...Ok, I did...but it is just a 30 day trial and I want the full version of the product I paid for!! So how do I get a valid serial number? The serial number on the box and the redemption code card both come up as invalid. Not a very happy customer right now!!
You will need to contact Adobe Support by chat or by phone.
Serial number and activation support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can’t open the application “Install Adobe Photoshop® 6.0” because it may be damaged or incomplete".
Does anyone know how to fix this problem?you probably have an incomplete/corrupt download.
to confirm check the file size against the expected file size.
then re-download perhaps with a different browser.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I have an iPod Touch which I've had for almost 4 years, with 32 GB of memory. I am unable to update it, and consequently cannot install any newer apps. I am very disappointed that I spent a lot of $$; now Apple wants me to spend $$ again to get a new one. As I mentioned, I am pretty upset. Does anyone know if there's a work around?
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I am running OS X 10.5.8 and i cannot install itunes 10.7. Is there a way to update my OS without paying?
I'm very afraid you will have to pay the immense sum of US $30 to upgrade to Snow Leopard.
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from their online store.
Incidentally,
Software update, upgrade--what's the difference? - http://support.apple.com/kb/HT1444 -
: I have recently purchased a iBook G4 Mac OS X VERSION 10.5.6 and I cannot install any apps such as firefox, adobe reader, it reads you cannot install this file on this disk
Are you saying the iBook G4 you have is running OS X 10.5.6?
The next file to get for it would be the Combo update 10.5.8 for Leopard.
And any old archived Flash player for 10.5.8 from Adobe flash site.
A browser such as TenFourFox, iCab, SeaMonkey-PPC, these are OK
but you won't be able to go past Leopard 10.5(.8) in a PowerPC Mac.
All these are free bits, however anything past 10.5.8 Mac OS X
would require a newer Mac with Intel-based architecture. Macs
made in 2006+ can see later OS X versions.
Good luck & happy computing! -
I bought iStudies Pro app a few hours ago and stiil cannot install it
I bought iStudies Pro app a few hours ago and stiil cannot install it! Could you help me?
<Re-Titled By Host>Aside from the pseudo-panacea, Resetting the System Management Controller , you are probably going to have to take it to a service place for testing/repair.
-
my ipad will not sync or back-up and thus cannot install OS5, it starts fine, but then says "cannot verify applications" and stops sync. Can someone help me?
going to "transfer purchases' does work - however the thermometer bar at the bottom reflecting apps, music, video, book, etc cpapcity fraks out, sliding left to right maybe 4 or 5 times during the process. Have you ever seen this?
After it is finished, the SYNC button is not longer darkened - so I thought it was safe to attampt an upgrade to OS05... which i am doing now... takes maybe 20 mins and then I normally get the error "the applications on this ipad cannot be verified" and the bottom thermometer bar zeros out all by my music. The content and apps are all fine on teh ipad. so strange. I made an appointment with customer service tomrrow AM - but i do not think i should have to pay for this - i have never even used support before!
I will update if it works - or re[eats the strange pattern again and does not update.
Thanks for your time and help! -
Hey I have a toshiba laptop and I cannot install firefox because the laptop runs android and there's only version for linux...and if u can tell me how to install adobe flash player too...Any advices??
This is a known problem, but we don't have a solution for it. If your device has the Toshiba Market app, you might be able to download a (possibly outdated) version of Firefox from there.
For more info, see:
* https://support.mozilla.com/en-US/questions/790362
* https://bugzilla.mozilla.org/show_bug.cgi?id=623929 -
That is basically a summary of the problem The Dell Inspiron 3847 does not come with RAID, so I tried installing a PCI-express 1x RAID card. However, the RAID BIOS never shows up. The HDDs show up when I install the RAID controller driver in Windows 7 setup, but I cannot install Windows 7. I am using an IOCrest SY-PEX40008 RAID card with a Silicon Image Sil3124 chipset.
I tried pressing the hotkeys for the RAID BIOS listed in the card's manual, but it seems to just cause bootup to freeze. BIOS also does not seem to detect the RAID card HDDs as boot options.%AppData% is the name of an environment variable.
On XP that variable points to C:\Documents and Settings\<user>\Application Data\
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field
See http://kb.mozillazine.org/Show_hidden_files_and_folders
You can use Help > Troubleshooting Information > Profile Directory > Open Containing folder
See also [[Using the Troubleshooting Information page]] -
I have an iMAC w/OS 10.7.5. I was working in Firefox today and as I was entering letters it changed to unrecognizable characters so I had to exit the application. Firefox froze up and after trying to re-open it many times, I finally tried uninstalling and then re-installing. When trying to open a new download, I am given an error message saying that firefox is already open or that files are missing. I spent approx 2 hrs on the phone with Apple support and they were unable to locate problem and I am now turning to you for help. I need this fixed desperately and ASAP as the program that I use for work will only run on Firefox.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Error_loading_websites -
I can download Firefox 4 but i cannot install due to above message
I found [http://siliconchaos.blogspot.com/2010/08/installing-firefox-4-beta-2-error-on.html this blog post] when trying to look up that error. Looks like a common cause of the error is programs like Evernote, Dropbox or Cisco's AnyConnect VPN Client. Try disabling those (the blog post has instructions) if a simple delete/replace doesn't help.
-
SCCM 2012 R2, DHCP and WDS and PXE same server
hi
I am using DHCP and PXE on same server and getting error PXE-E55: proxyDHCP did not reply to request on port 4011HI,
To get WDS and DHCP to work on the same machine, you need to configure WDS to share the same server as DHCP, here is how it is done.
You must have a functioning DHCP server with an active scope. WDS will utilize PXE which requires a DHCP server.
Whether you plan to co-host WDS and DHCP on the same server or use two different servers you must configure WDS to listen on a specific port. DHCP and WDS both require port number 67. If you have co-hosted WDS and DHCP you can move DHCP or the PXE site role
to a separate server or use the procedure below to configure the WDS server to listen on a different port.
Modify the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WDSServer\Providers\WDSPXE
Set the registry value to:
UseDHCPPorts = 0
For the new configuration to take effect run the following command on the co-located DHCP and WDS server:
WDSUTIL /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes
https://technet.microsoft.com/en-us/library/bb680753.aspx
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
Dual booting win 7 and arch: cannot install grub to partition
I have read the arch wiki page on dual booting and several other sources on line, but I am still struggling to get this to work.
I am trying to dual boot arch and windows 7 on my lenovo ideapad s205. the machine comes with windows 7 pre-installed.
I shrank the win 7 partition and added an extended partition with 3 logical partions for /boot, swap, and /.
I am able to install and run arch by installing grub to the mbr. when I do this, though, I cannot boot windows. (the windows section of grub menu.lst is uncommented and points toward hda0,0. I have tried hda 0,1 as well).
I have also tried to use the windows boot loader to load arch, as described in the arch wiki page on dual booting. The problem here is that, taking this approach, I should install grub to my /boot partition, but when I try to do this, the installer only allows me to install grub to sda or sdb (the usb stick).
I have read that grub should be able to boot linux from a logical partition. Is this so?
Is there something wrong with the arch installer that it is not giving me the option of installing to a partition rather than the mbr, or is this a problem with my partition scheme, or something else?
I am tempted to remove lenovo's recovery system, but on the other hand, I have already needed to use it several times while monkeying around with installing arch.
Thanks for any help.
UPDATE:
I now have the laptop dual-booting win 7 and arch. My solution ( adapted from here: http://helms-deep.cable.nu/~rwh/blog/?p=177) was to:
1. installed arch on the partitions I had created for it, but skipped the "install bootloader" stage.
2. in win 7, I downloaded and installed EasyBCD and made an entry for arch in it. I checked the option to "Use EasyBCD's copy of GRUB"
3. When I restarted, I got a grub error because the entry in grub's menu.lst was pointing at the wrong partitions for the kernel and root.
4. So I went back into the arch live disk, mounted the boot partition and edited menu.lst.
Now when I start the laptop, the windows boot loader starts and I can choose between win 7 and arch. when I select arch, grub4dos starts and gives me the option to start arch. this is not particularly elegant (nor is it fast), so I think this solution is less than ideal, but it does work.
I'd be interestd in any thoughts about what went wrong and what a better solution would be.
thanks.
Last edited by ratchet (2011-10-10 19:09:16)ratchet wrote:II am able to install and run arch by installing grub to the mbr. when I do this, though, I cannot boot windows. (the windows section of grub menu.lst is uncommented and points toward hda0,0. I have tried hda 0,1 as well).
Is this a typo in your post or how it was in menu.lst? Surely it should be hd0,0 and not hda0,0? The entry I have in my menu.lst is as follows:
# (2) Windows
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
What was yours?
Last edited by JHeaton (2011-10-10 20:18:22) -
I had to blow away my macbook and now cannot install my cs2 disc how do I get it installed
I recently had to reformat my MacBook and now am trying to install my CS2 disc. I'm running into Adobe's activation issues but cannot figure out how to install and activate. Anyone able to help?
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium
Maybe you are looking for
-
Missing archived logs in v$archived_log
I want to monitor if system accounts such as system, sys or other DBA accounts did any DML in my application schema. What are the minimal audit statements? needed to accomplish this. I know using Oracle Database Vault one can set realm to restrict th
-
MainStage 2 can't open MainStage 1 concert file
Hi, After upgrade logic pro to the newest version. I can't us MainStage 2 to open my old concert file from MainStage 1. The application sign me the error message below: 'The document "xxx" could not be opened. The file isn't in the correct format. Pl
-
I have been unable to uninstall google notifier following their instructions for my MacBook Pro. Any ideas what else to do? There is no icon in applications. I have an icon in activity moniter but I cannot delete it.
-
When I copy a URL and go to paste it in an e-mail, it won't paste. Some other box opens. I can paste the URL in the subject line, but doesn't hyperlink it. (blue) When using Internet Explorer, I don't have this problem. I'm new to FF with a new compu
-
Finding the time to Execute a Query
Hi, I have a procedure and lots of sql statements inside that . How can I find out which block is taking how much time .I don't want to use the TKPROF and other Tuning tools . Can I use some datetime function before and end of each block and print th