SCCM Agent install failed - CcmUnloadWmiProviders. Unloading WMI providers
Hi I have a SCCM 2007 SP2 setup in native mode. I have sccm client problem on Exchange server with os 2008 sp2.
SCCM agent was working on this server few months back but it is not working now.
SCCM agent stops at "CcmUnloadWmiProviders. Unloading WMI providers" steps.
I tried below steps to resolve this but no luck.
1. Uninstall sccm setup using command "ccmsetup.exe /uninstall"
2. Run "Cccmclean.exe /all"
3. Run delcert.exe
4. Rename SMSCFG.ini file
5. Run ccmsetup.exe again with source folder path too
6. As agent installation failed i rebuild WMI repository
7. Re run setup but it failed at same step.
8. I rebooted server and rebuild Repository but same error.
Any Idea about problem
If needed i can provide Log files too
ccmsetup.log (Last few lines)
<![LOG[MSI:
Action 20:07:08: CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:08.980+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:08:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:08.980+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:08:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:08.995+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:08:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:08.995+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:08:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:08.995+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.011+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.011+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.011+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.026+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.026+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.026+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.026+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.042+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.042+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.042+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.058+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.058+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.058+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.058+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.073+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.073+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.073+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.089+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.089+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.089+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.104+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.104+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.104+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.104+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.120+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.120+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.120+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.136+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.136+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.136+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.151+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.151+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.151+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.151+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.167+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.167+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.167+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.182+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.182+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.182+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.198+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.198+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.198+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.198+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.214+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.214+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.214+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.229+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.229+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.229+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.245+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.245+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.245+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.260+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.260+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.260+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.276+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.276+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.276+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.276+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.292+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.292+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.292+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.307+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.307+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.307+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.323+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.323+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.323+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.338+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.338+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.338+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.338+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.354+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.354+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.354+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.370+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.370+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTaskRollback. Removing System
Tasks]LOG]!><time="20:07:09.370+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmRegisterSystemTask. Registering System
Tasks]LOG]!><time="20:07:09.370+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmCreateIISApplicationPoolsInit. ]LOG]!><time="20:07:09.385+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmCreateIISVirtualDirectoriesInit.
]LOG]!><time="20:07:09.479+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
RegisterUser. Registering user]LOG]!><time="20:07:09.572+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmFixupServiceConfigInit. ]LOG]!><time="20:07:09.572+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:09:
CcmSetObjectSecurityInit. Applying security
permissions]LOG]!><time="20:07:09.650+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:11:
CcmSetObjectSecurity. Applying security
permissions]LOG]!><time="20:07:11.429+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:11:
CcmSetupLoggingInit. ]LOG]!><time="20:07:11.429+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:13:
CcmSetupLogging. Initializing
logging...]LOG]!><time="20:07:13.176+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:13:
SmsSwDistCacheConfigInit. ]LOG]!><time="20:07:13.176+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:13:
SmsSwDistSetCacheConfig. Configuring Software Distribution
Cache]LOG]!><time="20:07:13.270+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:13:
CcmRegisterPerfCountersInit. Registering performance
counters]LOG]!><time="20:07:13.270+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:13:
CcmRegisterPerfCountersRollback. ]LOG]!><time="20:07:13.613+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:13:
CcmRegisterPerfCounters. Registering performance
counters]LOG]!><time="20:07:13.613+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:13:
CcmRegisterComponentsInit. ]LOG]!><time="20:07:13.613+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmRegisterComponentsRollback. ]LOG]!><time="20:07:14.159+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmRegisterComponents. Registering CCM
Components]LOG]!><time="20:07:14.174+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsSetLUAAccessPermissionsInit. Setting Access
Permissions]LOG]!><time="20:07:14.174+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsSetLUAAccessPermissions. Setting Access
Permissions]LOG]!><time="20:07:14.252+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
InstallServices. Installing new
services]LOG]!><time="20:07:14.252+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
WriteEnvironmentStrings. Updating environment
strings]LOG]!><time="20:07:14.315+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmSetServiceConfigInit. Configuring
service]LOG]!><time="20:07:14.315+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmSetServiceConfig. Configuring
service]LOG]!><time="20:07:14.393+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsMigrateInventoryInit. Migrating SMS Legacy Client inventory
settings]LOG]!><time="20:07:14.393+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsMigrateInventory. Migrating SMS Legacy Client inventory
settings]LOG]!><time="20:07:14.471+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmConfigDCOMInit. Configuring
service]LOG]!><time="20:07:14.486+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmConfigDCOM. Configuring service]LOG]!><time="20:07:14.564+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsShellNotify. Setting SMS
configuration]LOG]!><time="20:07:14.580+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsSetClientLookupConfigInit. ]LOG]!><time="20:07:14.580+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmInitializePolicyInit. Initializing
policy]LOG]!><time="20:07:14.642+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmInitializePolicy. Initializing
policy]LOG]!><time="20:07:14.736+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsSetClientConfigInit. Setting SMS
configuration]LOG]!><time="20:07:14.736+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
SmsSetClientConfig. Setting SMS
configuration]LOG]!><time="20:07:14.970+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:14:
CcmMigrateDownloadSchemaInit. ]LOG]!><time="20:07:14.970+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
CcmMigrateDownloadSchema. ]LOG]!><time="20:07:15.110+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
CcmRegisterProduct. Registering
product]LOG]!><time="20:07:15.126+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
CcmRegisterProductRollback. Registering
product]LOG]!><time="20:07:15.126+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
SmsInstallPrepDrvrInitAMD64. ]LOG]!><time="20:07:15.126+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
SmsInstallPrepDrvr. Installing Software Metering PREP
Driver]LOG]!><time="20:07:15.204+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
StartServices. Starting services]LOG]!><time="20:07:15.204+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
CcmStartService. ]LOG]!><time="20:07:15.204+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
SmsCleanupDesktopMigrationInfo. Deinstalling the SMS Legacy Client or
SMS 2.0 Client]LOG]!><time="20:07:15.220+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
SmsClientInstallSucceeded. Sending status
message]LOG]!><time="20:07:15.220+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
InstallFinalize. ]LOG]!><time="20:07:15.220+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
CcmStopServiceRollback. ]LOG]!><time="20:07:15.251+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
ProcessComponents. Updating component
registration]LOG]!><time="20:07:15.266+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
CcmStopService. ]LOG]!><time="20:07:15.391+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
StopServices. Stopping services]LOG]!><time="20:07:15.563+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
SmsUninstallPrepDrvrAMD64. Uninstalling Software Metering PREP
Driver]LOG]!><time="20:07:15.563+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Warning 25702. Failed to
uninstall PrepDrvr.Sys for Software Metering
Agent.]LOG]!><time="20:07:15.641+000" date="04-11-2014"
component="ccmsetup" context="" type="2" thread="9048"
file="msiutil.cpp:370">
<![LOG[MSI: Action 20:07:15:
SmsStopUIComponents. Stopping UI
Components]LOG]!><time="20:07:15.641+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
DeleteServices. Deleting services]LOG]!><time="20:07:15.734+000"
date="04-11-2014" component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
<![LOG[MSI: Action 20:07:15:
CcmUnloadWmiProviders. Unloading WMI
providers]LOG]!><time="20:07:15.734+000" date="04-11-2014"
component="ccmsetup" context="" type="0" thread="9048"
file="msiutil.cpp:374">
Thanks Mike and theinfraguys for your suggestions. My problem is resolved.
The solution which worked for me has no logic but it solved my issue.
When my installation stopps at “CcmUnloadWmiProviders. Unloading WMI providers” step client.msi.log file have incomplete entry as “C:\Windows\SysWOW64\C”
At this time I have to restart WMI service and service will not stop correctly so I have to forcefully kill Winmgmt process and setup will continue.
I have to follow same process for upgrading SCCM client. During client upgrade some time I have to kill ccmexec process too.
Similar Messages
-
SCOM agent install fails Error 80070035 - the network path was not found
I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
I added a specific rule to allow TCP 5723 and 5724
DCOM is enabled
I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
did install to) and the server has plenty of disk space available
I am not sure what else to look at so would welcome any ideas
ThanksHi Petro,
I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
Also check if your agents have the WMI service started and enabled ?
Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
Component A
Component B
Minimum Requirement
Root management server or management server
Agent
64 Kbps
Root management server or management server
Agentless
1024 Kbps
Root management server or management server
Database
256 Kbps
Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
Also post the event logs of the Agents which are in not monitored state for analysis.
SCOM Agent installation failure error codes
Error
Error Code(s)
Remediation Steps
The MOM Server could not execute WMI Query "Select * from Win32_Environment where
NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
Operation: Agent Install
Install account: domain\account
Error Code: 80004005
Error Description: Unspecified error
80004005
1. Check the PATH environment variable. If the PATH statement is very long, due to lots of installed third party software - this can
fail. Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
2. The cause
could be corrupted Performance Counters on the target Agent.
To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
prompt. Press ENTER after each command.
cd
\windows\system32
lodctr /R
Note /R is uppercase.
Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
How to manually rebuild Performance Counter Library values
http://support.microsoft.com/kb/300956
3. Manual agent install.
The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access
3. Inspect WMI health and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
Operation: Agent Install
Install account: DomainName\User Account
Error Code: 80070005
Error Description: Access is denied.
80070005
80041002
1. Verify SCOM agent push account is in Local Administrators group on target computer.
2. On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
Disable McAfee antivirus during push
The MOM Server failed to open service control manager on computer "servername.domain.com".
Therefore, the MOM Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
800706BA
1. Firewall blocking NetBIOS ports
2. DNS resolution issue. Make sure the agent can ping the MS by NetBIOS and FQDN. Make sure the MS can ping the agent by NetBIOS
and FQDN
3. Firewall blocking ICMP
4. RPC services stopped.
The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
on this computer, please retry the Push Agent operation after some time.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 80072971
Error description: Unknown error 0x80072971
80072971
This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
%windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
http://support.microsoft.com/kb/934760/en-us
The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Remote Computer Name: servername.domain.com Install account: DOMAIN\account
Error Code: C000296E
Error Description: Unknown error 0xC000296E
C000296E
1. Netlogon service is not running. It must be set to auto/started
The MOM Server detected that the following services on computer
"winmgmt;(null)" are not running
C000296E
1. WMI services not running or WMI corrupt
The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: C0002976
Error Description: Unknown error 0xC0002976
C0002976
1. Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
Install account: DOMAIN\account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
80070643
1. Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
Call was canceled by the message filter
80010002
Install latest SP and retry. One server that failed did not have Service pack installed
The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
share exists.
80070006
1. Manual agent install
Possible locking on registry?
http://www.sysadmintales.com/category/operations-manager/
Try manual install.
Verified share does not exist.
The network path was not found.
80070035
1. Manual agent install
The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
80070070
1. Free space on install disk
The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
80070079
NSlookup failed on server. Possible DNS resolution issue.
Try adding dnsname to dnssuffix search list.
The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
8007041D
80070102
NSlookup failed on server. Possible DNS resolution issue.
Verify domain is in suffix search list on management servers.
The Agent Management Operation Agent Install failed for remote computer "name"
80070643
1. Ensure automatic updates service is started
2. Rebuild WMI repository
3. DNS resolution issue
The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
80070652
Verify not in pending management. If yes, remove and then attempt installation again.
The MOM Server detected that computer "name" has an unsupported operating system or service pack version
80072977
Install latest SP and verify you are installing to Windows system.
Not discovered
Agent machine is not a member of domain
Ping fails
1. Server is down
2. Server is blocked by firewall
3. DNS resolving to wrong IP.
Fail to resolve machine
1. DNS issue
The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
8007046A
1. This is typically a memory error caused by the remote OS that the agent is being installed on.
There are currently no logon servers available to service the logon request.
8007051F
1. Possible DNS issue
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
of the Windows Installer service.
8007064D
1. Install Windows Installer 3.1
The network address is invalid
800706AB
Possible DNS name resolution issue.
Tried nslookup on server name and did not get response.
Verify domain is in suffix search list on management servers.
The MOM Server failed to perform specified operation on computer servername.domain.com
80070040
1. Ensure agent push account has local admin rights
The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
80072979
1. Correct DNS/WINS issue.
2. Try pushing to NetBIOS name
Gautam.75801 -
VMM Agent install fails on Windows Server 2012 R2 Hyper-V
Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
Thanks
Kumaresan LakshmananSo, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now. -
SCVMM 2012 agent install fails on standalone 2008 R2 host
I am attempting to install SCVMM 2012 agent and getting this error:
Error (421)
Agent installation failed on exhpv01.denverwater.org because of a WS-Management configuration error.
Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server exhpv01.denverwater.org. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows
Remote Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.
I have run winrm qc and it shows winrm is configured. I have verified there is no gpo settings configuring winrm.
My runas account is a local administrator on the target host.
I can install the agent local but still cannot add to the SCVMM server.
MarkI am attempting to install SCVMM 2012 agent and getting this error:
Error (421)
Agent installation failed on exhpv01.denverwater.org because of a WS-Management configuration error.
Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server exhpv01.denverwater.org. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows
Remote Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.
I have run winrm qc and it shows winrm is configured. I have verified there is no gpo settings configuring winrm.
My runas account is a local administrator on the target host.
I can install the agent local but still cannot add to the SCVMM server.
Mark -
Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal -
ZLM Agent Install Fails - NOTHING_PROVIDES_DEP:
Hi,
I am trying to install the zlm agent (ZLM 7.3 IR2) on a SLES 11 box.
I have extracted the ZLM Server ISO image files, and put it on an NFS server. The client box then mounts the NFS share and I run the command
./zlm-install -a -i
Sometimes the installation goes through fine, but lately I am getting the following errors on the agent install
Installing Component : ZENworks Agent
Installing ZENworks Agent | | 0% NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
Install of ZENworks Agent failed.
Install has not completed
Here is the output from the log file
26 Mar 2010 13:08:43 INFO Daemon Received signal SIGTERM
26 Mar 2010 13:08:43 WARN ShutdownManager Preparing to shut down...
26 Mar 2010 13:08:43 INFO UnixWebServer Unix server stopped
26 Mar 2010 13:08:44 WARN ShutdownManager Shutting down daemon...
26 Mar 2010 13:08:44 INFO Daemon Final RSS size is 25708 KB
26 Mar 2010 13:08:51 INFO Daemon Starting ZMD version 7.3.2
26 Mar 2010 13:08:51 INFO Daemon Using Mono 1.2.6
26 Mar 2010 13:08:51 INFO WebCache Expiring cached files...
26 Mar 2010 13:08:51 INFO KeyManager Loading key whitelist
26 Mar 2010 13:08:51 INFO Daemon Loading trusted certificates...
26 Mar 2010 13:08:51 WARN NetworkManagerModule Failed to connect to NetworkManager
26 Mar 2010 13:08:51 INFO PackageManagementModule Using SAT backend
26 Mar 2010 13:08:51 INFO RPMBackend Loading installed packages
26 Mar 2010 13:08:51 INFO RPMBackend Finished loading installed packages
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'NetworkManager' - 'NetworkManager support'
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'Package Management' - 'Package Management module for Linux'
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'ZENworks Server' - 'SOAP methods used by a ZENworks server'
26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'XML-RPC interface' - 'Export ZMD public interfaces over XML-RPC'
26 Mar 2010 13:08:51 INFO ServiceManager Not loading existing services
26 Mar 2010 13:08:51 WARN Daemon Not starting remote web server
26 Mar 2010 13:08:51 INFO UnixWebServer Unix server listening for connections.
26 Mar 2010 13:08:51 INFO DaemonHealth Current RSS size is 18740 KB
26 Mar 2010 13:09:01 INFO ServiceManager Adding service: file:///mnt/data/packages/edir/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'edir'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/imaging/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'imaging'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/server/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'server'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/mono/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'mono'
26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/java/sles-11-x86_64
26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'java'
26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/sles-11-x86_64/sles-11-x86_64
26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'sles-11-x86_64'
26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/runtime-deps/sles-11-x86_64
26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'runtime-deps'
26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/client/sles-11-x86_64
26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'client'
26 Mar 2010 13:09:07 INFO Progress Progress.Stop Message: NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
Those packages deps are installed and I have a SLES 11 repo setup - which works.
Thanks.Hi Rainer,
Thanks for the response.
I tried what you said:
rpm -q --whatprovides /bin/sh
bash-3.2-147.3
Including the rebuild, but it didn't work.
I doubt its an RPM problem, because I can install any other package.
host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
yast2-squid-2.17.10-1.32
host-10-121-92-73:/mnt/agent # zypper in squid
Loading repository data...
Reading installed packages...
Resolving package dependencies...
The following NEW package is going to be installed:
squid
Overall download size: 1.3 M. After the operation, additional 4.4 M will be used.
Continue? [YES/no]: yes
Retrieving package squid-2.7.STABLE5-2.3.x86_64 (1/1), 1.3 M (4.4 M unpacked)
Installing: squid-2.7.STABLE5-2.3 [done]
Additional rpm output:
Updating etc/sysconfig/squid...
host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
yast2-squid-2.17.10-1.32
squid-2.7.STABLE5-2.3
While I was writing this, I tried to install the agent again after that squid rpm install and it appears to be working now.
It looks like the rebuild didn't do the trick, but install any new RPM sorts it out.
Thank you very much for the help. -
Hi everyone,
Been trying to install an agent on a solaris box for a couple days now. It errors out on agentConfig.sh complaining the gent port (3872) is busy. The agent port is not in use. I've run the installer with while loops doing netstat -a|grep 3872 and lsof as well and they show nothing on that port at any time. I've tried this through the GUI and the manual way with the same result. Anyone have any idea?
I'm stumped. Below is some of the logfile
Thanks in advance....Brien
Executing command: /u00/app/oracle/agent/core/12.1.0.1.0/oui/bin/runConfig.sh ORACLE_HOME=/u00/app/oracle/agent/core/12.1.0.1.0 RESPONSE_FILE=/u00/app/oracle/agent/core/12.1.0.1.0/agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true
Configuration Log Location:/u00/app/oracle/agent/core/12.1.0.1.0/cfgtoollogs/cfgfw/CfmLogger<timestamp>.log
ERROR: Agent Configuration Failed SEVERE: Agent port passed by user is busy and cannot proceed with the configuration. Pass a free port and retry the configuration.
and from CfmLogger_2012-01-27_12-15-10-PM.log:
1.ORACLE_HOME=/u00/app/oracle/agent/core/12.1.0.1.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=ddbpr01.servicemagic.com
4.b_doDiscovery=true
5.AGENT_BASE_DIR=/u00/app/oracle/agent
6.AGENT_INSTANCE_HOME=/u00/app/oracle/agent/agent_inst
7.s_hostname=ddbpr01.servicemagic.com
8.OMS_HOST=smcloudpr001.servicemagic.com
9.b_startAgent=true
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4890
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://smcloudpr001.servicemagic.com:4890/empbs/genwallet
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://smcloudpr001.servicemagic.com:4890/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnrecognized SSL message, plaintext connection?
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: http
INFO: oracle.sysman.top.agent:Performing free port detection..
SEVERE: oracle.sysman.top.agent:Agent port passed by user is busy and cannot proceed with the configuration. Pass a free port and retry the configuration.
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/u00/app/oracle/agent/agent_inst
2. agentBaseDir=/u00/app/oracle/agent
3. oraHome=/u00/app/oracle/agent/core/12.1.0.1.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/u00/app/oracle/agent
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 12:15:13.121Hi,
This seems to be similar issue addressed in the following bug:
Bug 13652664: AGENT DEPLOY FAILS WITH AGENT PORT PASSED BY USER IS BUSY
Issue is not with the PORT, but IP Address for the server in file /etc/hosts file is incorrect.
Best Regards,
Venkat -
DPM 2012 Manual Agent Install Fails
Hello Everyone,
Using DPM 2012 SP1, I've been stuck on an issue for some time now in trying to get a DPM agent install accomplished on a certain server. The DPM server resides on a parent domain and the server that I am having an issue with is on a child domain. Other servers
on the child domain have installed the agent without issue when doing it manually.
Here is the command I use (as an administrator):
net use X: \\DPMSERVERNAME.parentdomain.com\c$
cd /d X:\Program Files\Microsoft System Center 2012\DPM\DPM\agents\RA\4.1.3465.0\amd64\1033
DPMAgentInstaller_KB2991995_AMD64.exe dpmservername.parentdomain.com
The installation proceeds through the Microsoft License Terms, begins to install and then backs out. The error message that is generated states: "DPMAgentinstaller failed with error code = 0X80070643 error says: fatal error during installation"
In researching the 1708 error within the log file it lead me to the fact that maybe the firewall on the target server was the issue. I
ran this suggested fix on the target server:
netsh advfirewall firewall set rule group=\"@FirewallAPI.dll,-29502\" new enable=yes
netsh advfirewall firewall set rule group=\"@FirewallAPI.dll,-34251\" new enable=yes
netsh advfirewall firewall add rule name=dpmra dir=in program=\"%PROGRAMFILES%\\Microsoft Data Protection Manager\\DPM\\bin\\DPMRA.exe\" profile=Any action=allow
netsh advfirewall firewall add rule name=DPMRA_DCOM_135 dir=in action=allow protocol=TCP localport=135 profile=Any
The issue still persists.
The MSDPMAgentinstall log file says the following at the end:
Property©: Date = 1/7/2015
Property©: MsiNetAssemblySupport = 4.0.30319.18408
Property©: MsiWin32AssemblySupport = 6.1.7601.17514
Property©: MsiRunningElevated = 1
Property©: Privileged = 1
Property©: USERNAME = Windows User
Property©: DATABASE = c:\b1e38ee30069ed00e510\DPMRA.msi
Property©: OriginalDatabase = c:\b1e38ee30069ed00e510\DPMRA.msi
Property©: SOURCEDIR = c:\b1e38ee30069ed00e510\
Property©: VersionHandler = 5.00
Property©: ROOTDRIVE = c:\
Property©: EXECUTEACTION = INSTALL
Property©: ACTION = INSTALL
Property©: UILevel = 5
Property©: CostingComplete = 0
Property©: OutOfDiskSpace = 0
Property©: OutOfNoRbDiskSpace = 0
Property©: PrimaryVolumeSpaceAvailable = 0
Property©: PrimaryVolumeSpaceRequired = 0
Property©: PrimaryVolumeSpaceRemaining = 0
MSI © (68:E8) [09:38:14:119]: Note: 1: 1708
MSI © (68:E8) [09:38:14:119]: Note: 1: 2205 2: 3: Error
MSI © (68:E8) [09:38:14:119]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1708
MSI © (68:E8) [09:38:14:119]: Note: 1: 2205 2: 3: Error
MSI © (68:E8) [09:38:14:119]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI © (68:E8) [09:38:14:119]: 吰瞒
MSI © (68:E8) [09:38:14:119]: 吰瞒
MSI © (68:E8) [09:38:14:119]: Grabbed execution mutex.
MSI © (68:E8) [09:38:14:119]: Cleaning up uninstalled install packages, if any exist
MSI © (68:E8) [09:38:14:119]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/7/2015 9:38:14 ===
Any ideas where to turn next?I do not have a Program Files\Microsoft System Center 2012\DPM\DPM\ProductionAgents\RA\4.1.3313.0\amd64
file path on the DPm system.
Rather Program Files\Microsoft System Center 2012\DPM\DPM\ProtectionAgents\RA\4.1.3313.0\amd64
Still, I ran the DPMAgentInstaller_x64.exe
from that file path and the agent did not install.
Also, on the DPM server I have added the target machine name to the DPMRADmTrustedMachines
group. I also made sure that the domain service account is in the same group. Still no luck. -
SCCM Agent Install \ Deployment query?
Hi All
I have a query regards best practices. Within our environment we will have a number of Build Environments (all within the same domain), which will involve servers being built, decommissioned and rebuilt for application testing teams.
Query is how best to handle the install\life-cycle of the SCCM Agent with regards to this scenario?
Just looking to see if others have had experience of this type of scenario and best practices \ experiences etc
Any thoughts much appreciated.
Kind Regards
AndrewThank you for your replys Jason and Wally,
I guess 'best practice' was the wrong phrase to use in this case. However across the other System Center applications a number of best practices have become established for a certain scenarios\processes, and I was looking to see if a similar
approach had become established for the scenario outlined. However on reflection I appreciate SCCM is a product that has enormous flexibility with regards to the variety of environments and the complexity of scenarios it is able to accommodate\handle. Thus
as you say, 'best practices' are not that realistic in general.
With regards to the scenario mentioned, we have 'x' number of development environments which will be provisioned via VMM Service Templates, via SCSM and SCORCH automation. With the first number of rebuilds the Server names will not be the reused, but
after 'x' number of rebuilds the server names will be cycled\reused. After further digging\reading I believe a scripted approach would be best, along with a separate method of cleaning out old server names from within SCCM itself. The main concern
is when a server names get reused, it may still be in the SCCM database, but the new Server (with same name) has a new SID; which I believe would\could introduce issues.
Although I guess, with all that said, the most elegant\simple approach would be to have a clean uninstall of the SCCM agents whenever a development environment is decommissioned?
Kind Regards
Andrew -
OS managemnet agent install fails.....
I have a group of Solaris 10 servers where the agent installation fails at
executing step : sc_console
verified sc_console command is OK
Configuring sc_console
checking existing sc_console connections
doing sc-console registration
Feb 23, 2012 7:37:26 PM org.apache.commons.httpclient.HttpMethodDirector execute WithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
I have logged into each system and verified (ping, ssh, wget) they have access to the proxy server and the EC console machines.
Any idea what would cause this??I think you need more than that, did you check all the required ports as per the site prep guide? You could also check the ops center security guide
these are the ones for the agent to communicate (there's a whole list in the docs)
proxy controller to agent
FTP, TCP: Port 21
SSH, TCP: Port 22
Telnet, TCP: Port 23
DHCP, UDP: Ports 67, 68
SNMP, UDP: Ports 161, 162
IPMI, TCP+UDP: Port 623
Service Tags, TCP: Port 6481
ICMP ping: no port
agent to proxy controller
HTTPS, TCP: Port 21165
HTTPS, TCP: Port 8002
OS to proxy controller
HTTP, TCP: Port 8004
java client to public API's
Transport Layer Security(TLS): Port 11172 -
Why SCCM 20012 Install fails with remote 64 bit SQL Server but proceeds for remote 32 bit SQL Server
I have the following setup:
AD User accounts
- SQLAdmin (used to run SQL Services i.e. Database Engine)
- SCCMADmin (used to install SCCM 2012)
SPN registered for user account SQLAdmin
setspn -S MSSQLSvc/SQL.Domain_Name:1432 Domain_Naem\SQLAdmin
setspn -S MSSQLSvc/SQL:1432 Domain_Name\SQLAdmin
setspn -S MSSQLSvc/SQL.Domain_Name:1433 Domain_Naem\SQLAdmin
setspn -S MSSQLSvc/SQL:1433 Domain_Name\SQLAdmin
and checked with setspn -L TESTING\SQLAdmin
1 SERVER called SQL
32bit Server with SQL Server 2008 + SP3 + Cumulative Update 6
2 SQL instances - Default (MSSQLSERVER) and
SCCM2012
MSSQLSERVER instance uses TCP port 1433
SCCM2012 Instance users TCP port 1432 (no dynamic ports)
User accounts that have been given public and sysadmin SQL server roles
on both instances are: SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Client Protocols TCP enabled (and Named Pipes) (checked via SQL Server Configuration Manager)
Local Administrators Group on this server has members - SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Firewall turned on with access allowed on Ports 1432, 1433, 4022,445, and WMI - WMI-in, DCOM-in and ASync-iN builtin rules allowed\enabled.
1 SERVER called SQL3
64bit Server with SQL Server 2008 + SP3 + Cumulative Update 6
2 SQL instances - Default (MSSQLSERVER) and
SCCM2012
MSSQLSERVER instance uses TCP port 1433
SCCM2012 Instance users TCP port 1432 (no dymanic ports)
User accounts that have been given public and sysafmin SQL server roles on both instances are:
SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Client Protocols TCP enabled (and Named Pipes) (checked via SQL Server Configuration Manager)
Local Administrators Group on this server has members - SQLAdmin, SCCMAdmin, Domain Administrator, Local Administrator and computer account SCCM
Firewall turned off
1 SERVER called SCCM
64bit Server that is to be the Primary Site Server\MP for SCCM 2012
ODBC link to SQL\SCCM2012,1432
ODBC link to SQL3\SCCM2012,1432
ODBC uses SQL Native Client 10.0 (64 bit)
Both ODBC connections when TESTed pass and suggest connectivity to SQL Servers
Install process doe SCCM2012
Tried to install SCCM 2012 RC2 when logged in to SCCM Server as AD user account
SCCMAdmin, and when utilising the SCCM2012 SQL instance on
32 bit server of SQL install proceeds barring warning about 8GB rec, for SQL Server. Then fails on PKI certificate issue. Installation (chose HTTP for MP). I beleive the PKI failure as install starts is
due to the fact that SCCM 2012 needs its database server to b 64 bit ?
Thus i then tried to install SCCM 2012 RC2 when logged in to SCCM Server as AD user account SCCMAdmin, and
when using the SCCM2012 SQL instance on
64 bit server of SQL install proceeds but fails at checking stage and says:
SQL Server sysadmin rights FAILED SQL3.Domain_Name
Either the user account running Configuration Manager Setup does not have sysadmin SQL Server role permissions on the SQL Server instance selected for site database installation, or the SQL Server instance could not be contacted to verify permissions. Setup
cannot continue.
and
Site System to SQL Server communication WARNING SCCM.Domain_Name
A communication error has been detected between the specified site system and the site database computer. This error can occur when the site database server is offline or if a valid SPN has not been registered in Active Directory Domain Services for the SQL
Server instance hosting the site database. Setup cannot continue.
Why does the install of SCCM 2012 with 32 bit SQL proceed further than the install with 64 bit SQL, with the latter process failing as above error meesages show and yet both servers are set identically (apart from temporary turning off Firewall on the 64
bit server) and during the install the Databse Server specified is accepted ?Thanks for the reply.
I can connect via ODBC to the the 32 bit SQL Server and the 64 bit SQL Server from the SCCM Server
The SQL Server Unit called SQL3 unit is a 64 bit SQL.
The SQL Server Unit called SQL is only 32 bit, but at least gets past the final checking stage and the error messages about sysadmin rights and Site System to SQL Server communication problem, and then fails with PKI certificate error message.
When trying to install SCCM specifying the 64 bit SQL Server as the Database Server it gives the 2 error messages at the final checking stage of the installation as listed.
So as I said what is confusing is the fact that if the SCCM install uses the remote 32 bit SQL Server it passes the final checking (although fails with PKI certificate message) but the 64 bit SQL Server set up exactly the same apart from the Firewall being
left off for the time being, fails at the final check stage with the 2 listed errors.
If I use a local 64 bit SQL Server the installation is fine.
Still would like to find out what cause the 2 issues for the remote 64 bit SQL Server, when ODBC seems fine, sysadmin rights have been given for the installer account and the SCCM computer account and SPNs have been set for the user account running the SQL
Services. -
Grid Control agent install fails
Hi all,
I'm trying to install Oracle Grid control agent on linux machine and getting the following error:
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-8 or SuSE-9
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 1544 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1701MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2004-12-20_08-44-53AM. Please wait ...
Error in writing to directory /tmp/OraInstall2004-12-20_08-44-53AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
My /tmp has 1.5 GB of free space so that's really not the issue here. I know that the installation goes well if I use the Universal Installer that comes bundled with 10G RDBMS, but on machines with Oracle 8.1.7.4-9.2.0.5 I wouldn't like to update OUI's because of this issue. Anyone having this problem/solution?
Br,
AnssiThe issue is not about silent install or temp or root.
I have installed Agent on Linux without issues after I read closely the oracle requirements on linux.
Make sure you read oracle linux requirement, there is a patch you need to download that will create proper setting for oracle on linux.
Try look for Application Server 10g installation guide, this patch is documented for Application Server 10g on linux.
The patch will create oracle.sh file that linux will run each time user oracle is activated.
If you still get problem let me know through forum or direct.
Thanks
George -
Install SCCM Agent without SCEP?
Hi all
we currently have ~5000 Win7 clients with SCCM and SCEP. Now we would like to deploy the SCCM agent to our servers. But since there is already an AV solution installed, we would like to install the SCCM agent without SCEP. Is there a way to do that?
I am aware that there are ways to remove SCEP once it is installed, but I am looking for a solution to that will prevent SCEP from installing in the first place. I've read various posts that mention separate Client Settings for servers but I am afraid that
these settings will trigger too late and SCEP will have removed the existing AV solution.
Currently we have the Default Client Settings with priority 10'000 which are not deployed to any collections and we have separate Client settings with priority 1 that are deployed to all machines with SCCM agent installed.
Your help is very much appreciated.
Best regards
MathiasThe Default Client Settings are applicable to all clients, by default, without being deployed. Any custom client settings will have a higher priority and thus overwrite. In this case I would configure the Default Client Settings with
Manage Endpoint Protection client on client computers set to
No, create a custom client settings with Manage Endpoint Protection client on client computers
set to Yes and target the Windows 7 clients. This way your server will not get Endpoint Protection by default.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
View Agent uninstall failed - View Composer guest server service
Hello,
I tried to uninstall the View agent 5.3, but the installer hanged on stopping services... portion. Looking at the services.msc, the Horizon View Composer Guest Agent server service was still running. Trying to stop the service manually results in the prompt to stop a dozen more services related to OS. Looking at it, I found that View Composer Guest Agent server has inserted itself as a dependency for BFE, Netlogon, and TCP/IP Protocol Driver services, which also, in turn, makes every services that are dependent on those three services to be dependent on View Composer Guest service.
I am seeing this behavior all the way up to 6.0.2 Agent (not sure about 6.1 Agent). Why is View Composer service inserting itself as a dependency for critical OS services? I mean, really VMware? REALLY??Thanks Mike and theinfraguys for your suggestions. My problem is resolved.
The solution which worked for me has no logic but it solved my issue.
When my installation stopps at “CcmUnloadWmiProviders. Unloading WMI providers” step client.msi.log file have incomplete entry as “C:\Windows\SysWOW64\C”
At this time I have to restart WMI service and service will not stop correctly so I have to forcefully kill Winmgmt process and setup will continue.
I have to follow same process for upgrading SCCM client. During client upgrade some time I have to kill ccmexec process too. -
SCOM agent install on Unix/Linux
Hi, trying to install agent on RHEL. Here is the case:
- Hosts file added with FQDN name on Linux server
- IPtables off for IPv4 & IPv6(I've a doubt here. Even turned off, do they need exception entry in iptables for both v4 & v6)
- Replying for ping from both SCOM management servers by hostname and IP address.
- nslookup pointing to same IP & server
- DNS resolution ok (both forward & reverse)
- WinRM qc showing WinRM already set to listen.
- Getting discovered while agent install, failing at certificate signing validation - the last step.
- Sudoer file modified perfectly
- Port 1270 is open over network (confirmed by n/w team)
Still receive below error :(
- Agent verification failed.
Error detail: The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination,
most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". When verifying winrm, it is already configured to receive requests.
-Thanks, SatyaCertificate does not include the FQDN so it fails. You can do a few things here to fix it.
Run the following on the Linux agent and try discovery again. This will overwrite the old certificate and create a new one with the FQDN.
/opt/microsoft/scx/bin/tools/scxsslconfig -h <Linux hostname> -d <domain name> -f -v
Update the /etc/hosts file on the Linux computer and add the FQDN:
x.x.x.x myLinux.mydomain.com myLinux
or update the /etc/resolv.conf:
domain mydomain.com
If you do either of the last 2 you will want to delete everything under
/etc/opt/microsoft/scx/ssl and then re-run discovery as it will still try to use the old certificate if it exists.
-Steve
Maybe you are looking for
-
Apple Bluetooth Keyboard in Windows 7 = no connection
Hi, I have the thick version of the bluetooth apple keyboard. The problem is that I can't seem to sync my keyboard with Windows 7. I have successfully synced my mighty mouse by deleting the bluetooth preferences in the OS X side and syncing it on the
-
sorry, I'm not going to list any more sites...fix this program, or lose a user since Navigator v1.0
-
Create ADF elements programmatically using Java
Hello, I use JDeveloper 11.1.1.2.0 and Java 6 (of course) <f:view> <af:document title="Some Text" id="d1"> <af:messages id="m1"/> <af:form id="f1"> <af:panelGroupLayout layout="vertical" id="pgl1" halign="center"> <af:outputText value="Song" id="ot1"
-
Vendor Invoice Number in FBl1n
Hi MM Gurus, The client requires to have the Invoice Number which is generated at the time of LIV in FBL1n T. Code. I am getting the Accounting Document Number of Invoice but not the Vendor Invoice Number. I have tried everything from the Change Layo
-
Blank line after removeChild()
Can anybody help with this question? Looking for answer in forum archives - I found several answers which doesn't work. 1) use - normalize() - no effect 2) transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, "GMAadapter.dtd") - no effect 1. I ha