Sccm boot from thumb drive - failed to find task sequence.

The computer should be generating its own netbios name when booting but what is happening when booting from
the SCCM 2012 thumb drive FAILED TO FIND TASK SEQUENCE to grab image off of network drive.
When I real the SMSTS.log file it is getting its name pulling names off of computers that are in AD.
ALERT ALERT! ALERT!

Run this query for the MAC and see if there are any results. Could be that the MAC is assigned to a machine already and you either need to deploy the OS to a collection and add that machine to the collection, or it is possible the GUID is duplicated.
select SYS.netbios_name0, SD.itemkey, MAC.MAC_Addresses0, SD.SMS_Unique_Identifier0,SD.Hardware_ID0,SD.Name0,SD.Unknown0,SD.Obsolete0,SD.Active0,SD.Decommissioned0,SD.Creation_Date0,SD.SMBIOS_GUID0
from System_DISC SD FULL JOIN
v_r_system SYS ON SD.itemkey = SYS.resourceid FULL JOIN
System_MAC_Addres_ARR MAC ON SD.itemkey = MAC.ItemKey
--where SD.Unknown0 = 1
where MAC_Addresses0 = '%:AD:D5'
--OR SD.SMBIOS_GUID0 = ''

Similar Messages

2 internal hdd's can't boot from thumb drive

I installed an SSD and a seagate SSD/HDD hybrid in the optical bay. I installed refit but I can't boot from a thumb drive and my superdrive doesn't act right, Is there firmware update or any kind of fixes anyone has seen heard or similar problem.
2010 mbp Intel ssd/momentus XT hybrid

cleaning the drive worked.

Can't boot from internal drive - Please help!

The internal drive on my PBG4 was making some funny noises this morning and sure enough, when I tried to reboot from it I was unable to. Instead I was brought to a screen with a DOS prompt with some cryptic error message. Since then I've called Apple support and their "solution" was to re-format the drive and reinstall the OS. I can do that if I absolutely have to, but if there's any way around it, I'd much rather avoid the reformatting/reinstalling everything nightmare scenario. Initially Disk Repair said the drive couldn't be repaired. I booted from my Disk Warrior CD (3.0.3), which prompted me to backup data (luckily I have an external 250GB drive) and I backed up my home directory. I did that and rebuilt the directory, then restarted from my Tiger CD and ran Disk utility again and it said the disk was fine. I tried to boot from the drive and I get taken to a DOS prompt again with the following error message:
launchd can't exec /bin/sh for single user: No such file or directory
Any suggestions on what I can try at this point short of reformatting the drive and starting over from scratch?
Powerbook G4 Mac OS X (10.4.7) 1.25 GHZ, 1GB Ram
Powerbook G4 Mac OS X (10.4.5) 1.25 GHZ, 1GB Ram

I assume you have OS X on a 2nd drive that you can run DW, Disk Utility etc.
As you backup files and know they are okay, delete them. Undo the layers of onion and try to go from latest to oldest.
If you don't have an emergency fw drive...
The trouble with long backups on a problem drive is they can fail during the backup if the drive gets too hot, which happens.
Back in Panther, you could use BootCD to create an emergency CD or DVD with your system, full finder, loads of utilities, and could even run FireFox. With that, you could run TTPro 4, Disk Warrior, DU, Rember etc. AND play around in the Finder and Terminal.
I still keep a CD and DVD with 10.3.9 just in case. The perfect FW drive would have a couple OS versions, a backup partition (that you can erase if needed).
Apple Disk Utility from CD/DVD can also be used to copy/clone a volume or foleer, using Restore and output to a volume or disk image.

Copy from thumb drive to macbook pro

How to copy from thumb drive to macbook pro. Pictures

Two additional comments:
For pictures, Image Capture is another option.
If you are running Mountain Lion, you may not see the thumb drive on your desktop or sidebar unless you activate that option in the Finder Preferences (General and Sidebar, respectively).

XServe won't boot from any drive, but recognizes them in OS X Installer

I know I have another post here but this is a different issue, and I've already fixed that one thanks to Camelot .
I just received an 2 used xserves for work. One booted into OS X Server fine, so I scrubbed it and reinstalled without issue.
The second however never booted into an install. That is, I never found it on my network when I started it up and when I pushed the power button it would turn off immediately, suggesting that there was no OS on the disk or that the xserve couldn't find it. I didn't have a spare monitor to plug into it (surprisingly) so I just chalked it up to the fact that it was a new disk and hadn't had OS X Server installed on it.
Now I have a spare monitor, I've gone and installed OS X Server on the xserve. It boots from the DVD just fine, runs through the installer, then when it goes to restart, it won't boot from the hard drive that it just installed OS X Server on, it'll just boot back from the DVD unless I pop it out. If I let it boot up without the DVD in it, I'll get the standard Folder with a ?.
At first I thought it was the drive, so I installed OS X Server on another drive. Still wouldn't boot to that drive, so I booted from the DVD and repaired the disks in Disk Utility. Still nothing. I booted to DVD again and when I went to Startup Disk, it actually did show my disks with their respective OS X Server installs.
When I boot the machine holding alt/option, the system doesn't show my drives, only the DVD if it's in the slot.
I figured ok, this has to be the drives, so I swapped them with those of the identical xserve in the rack below, but my top xserve wouldn't boot from those drives either. Somewhat expectedly however, the bottom xserve would boot the drives that I took out of the first one.
Now I'm just stumped. Any ideas?
PS, drives are unlocked.

MrHoffman wrote:
The EFI firmware, the SMC and possibly the disk I/O path seem good potential candidates for culprit.
Load and run the hardware diagnostics.
Reset the SMC, and reset the LOM.
I'm running the EFI diagnostic tool now. Firmware and disk I/O path came to mind, let's just hope it's not a major hardware issue
beatle20359 wrote:
Hi Jeff,
Do you have the specs of the xserve and the version of OSX server you are trying to install? Does the Xserve have the RAID card installed in it and what size are the drive modules.
All the best
Beatle
2x 3GHz Dual-Core Xeon
8GB RAM
OS X Server v 10.6.3 (the version I'm trying to install, that is)
No RAID card. The system drive is 80GB and a second storage drive is 1TB.

MacPro can't boot from external drive

Running 10.7.3 and a MacPro which gets backed up each night with SuperDuper. Can't boot from this drive (black screen). Yet I can take the same drive and start up my Macbook Pro! So it isn't the drive or the data on it. I'm stumped. Could this be related to an issue where I can't get this same MacPro or system to successfully backup to Time Machine without error? The boot drive seems OK (ran Disk Warrior and Disk Utility).

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

How to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer.
I downloaded Oracle Linux 5.6 Media Pack for x86_64 (file name V24479-01) from https://edelivery.oracle.com/linux.
I have installed OEL 5.6 for VM rac1 and done the follows:
1) install rpm and oracleasm packages for rac1.
2) edit /etc/hosts to set up IP addresses for eth0 and eth1 for rac1 and rac2.
3) edit eth0 and eth1 for rac1 by using command [root@rac1 \]# neat
But when boot the OS, I see "initializing Oracle ASMLib driver: FAILED".
When configure Oracle ASM library driver by running the command:
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: FAILED"
I think the reason is the OS cannot initialize Oracle ASMLib driver. My question is:
Do any folk understand how to solve the issue "OEL 5.6 boot Oracle ASMLib driver: FAILED" ?
Thanks.

Folks,
Hello. Thanks a lot for replying. OEL 5.6 comes with 2 kernels: uek and red hat
I have chosen to use red hat kernel for 64-bit. I run the following command:
[root@rac1 /]# uname -rm
Output: 2.6.18-238.el5x86_64
I have downloaded 4 files for this version of kernel from
http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html as below:
oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-debuginfo-2.0.5-1.el5.x86_64.rpm
oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm
I have installed the 4 files and got the error messages for the first 2 files as below:
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-xen=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5xen-2.0.5-1.el5.x86_64.rpm
[root@rac1 /]# rpm -ivh /home/oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
Error: Failed dependencies: kernel-debug=2.6.18-238.el5 is needed by oracleasm-2.6.18-238.el5debug-2.0.5-1.el5.x86_64.rpm
The last 2 files have been installed successfully. But when reboot Oracle Linux Server-Base 2.6.18-238.el5, I still see :
"Initializing ASMLib driver: FAILED."
[root@rac1 /]#/etc/init.d/oracleasm configure -i
Its output "initializing Oracle ASMLib driver: OK "
My questions are:
Does the issue OS "Initializing Oracle ASMLib driver: FAILED" have effect later ? Do we need to solve it ?
Thanks.

Is it possible boot from U drive?

Is it possible boot from U drive on a leopard system? How to do it? My CD disc was broke, and i try to install a windows Xp by bootcamp,but i cannot boot from CD anymore.

*"No flashdrive boot option."*
Then the Mac doesn't see the flash drive as a bootable volume.
If there is another way to install Windows without an optical drive you'd be better off posting your question in the Boot Camp forums, as if anyone has done it, you'd find them there:
http://discussions.apple.com/category.jspa?categoryID=237

DV7-6185us wont boot from hard drive.

I recently installed a new hard drive after the one it came with completely crashed. After installation of new hard drives, I inserted and installed all of the recovery disks needed for the new hard drive. Upon completetion it said it needed a restart and after restart I get a message saying I need a OS for the hard drive for boot up.
I went into my bios to make sure the hard drive was first in boot order which it is but when trying to pick where to put from on the bios screen it only give me the cd option. I ran a full diagnostic of the hard drive and everything checks out. I made sure to unplus the hard drive and tried a different slot and still get the same thing. Installation when fine but still won't boot from hard drive.
Is there something that i'm missing? The hard drive is fine. So what could it be?

Hi,
Assuming this is just a problem with the recovery media, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source - Digital River.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Won't boot from USB Drive

I am trying to replace my internal drive. I got a WD Scorpio from OWC and formatted and installed OS 10.6. But when I boot from the drive I get the panic screen.
The drive otherwise behaves normally. I can see the files, etc.
Also, strangely, the drive is only recognizable as bootable from the right USB port. That doesn't really make any sense to me.
Please help! The OWC folks have sent me multiple drives and have really tried to get this working, but I have the same result each time. Anyone out there have a solution?
Thanks.

Try prepping the drive this way:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Booting from FireWire Drive

I have a LaCie 160MB (F A Porsche style) external firewire drive.
I have been able to create a bootable clone of my iBook HD using Disk Utility and the Restore function.
I have been able to create a bootable partition by installing the System Software onto it.
But I have not had success using SilverKeeper or SuperDuper! Does anybody know why? I would really like to use the features of one (or another if available) of these applications.
Thanks.
-Ted

Below is LaCie's Tech Support Reply. What is interesting is that they suggest Carbon Copy Cloner (instead of Silverkeeper). Also interesting is that it worked. I hope this helps some of you.
Ted
Hi Ted--
Thanks for contacting LaCie Technical Support. All of our firewire
drives can be used as boot volumes. Due to differences in operating
systems and Macs, we are unable to provide support for booting from
firewire drives other than the following information:
1. Make sure the Mac is bootable via firewire. All Macs with built-in
firewire can be booted from an external drive except:
-Blue and White G3s
-PCI-Graphics G4s. This can be determined by looking in the Apple
System Profiler. The PCI Graphics G4s use the same motherboard as the
B&W, except with a G4 processor shoehorned in.
2. The drive must be connected to a native port. It will not work if
the drive is connected to an add-on card.
3. The Mac must have the latest firmware installed. The proper updater
can be found and downloaded from here:
http://docs.info.apple.com/article.html?artnum=86117
Download and read the instructions carefully. It is possible to kill a
Mac if the update is interrupted. Then, perform the update. If the
firmware is already current, the updater will report this.
4. Format the drive fresh using either Apple's Disk Utility in OS X or
Silverlining in OS 9. Use the Mac OS Extended (HFS+) format only.
(Journaling may be enabled on OS 10.3.)
5. If making an OS 9 boot drive, you can just copy the System Folder
over to the root of the boot volume. To be bootable, the System Folder
must be blessed, i.e. has a happy Mac face on it. If it does not, you
can try to force it to bless by removing the Finder from the folder and
moving it to the root. Then, move the Finder back. The folder should
now be blessed. If not, then there is probably an issue with the System
Folder.
6. In making an OS X boot drive, the ONLY two recommended solutions
are:
--install from the OS X install disk, preferably the one which came with
the Mac. You will not be able to make a successful boot drive using an
older disk set. A newer disk set should also be fine.
--use a utility, such as Carbon Copy Cloner, to perform a copy of an
existing OS X install. It is not possible to do this manually. There
are issues with permissions, hidden files, and files in use that cannot
be manually overridden. If you are using a disk image, you will still
need to use a utility, such as Carbon Copy Cloner, to copy the files out
from the image to the root of the new boot volume. A simple drag and
drop will not include the necessary hidden files, such as the boot
loader and the kernel.
If the volume does not appear as a Start Up Disk, try booting with the
Option key held down and see if the drive shows in the boot drive
selection screen.
If the volume does not show, or the kernel panics on boot, chances are
the OS install was not performed properly.
In general, CD/DVD drives are not bootable via firewire, but will work
under certain circumstances, usually booting from OS X to OS X. They
should not be relied upon as such. To boot from one, hold down the
Option key while booting. If the boot CD shows on the screen, you may
select it and continue the boot.

My iMac (late 2006) no longer boots from FireWire drives, although they contain all the system files.

My iMac (late 2006) no longer starts (boots) from Firewire drives, although they all contain a current system (Mac OS X 10.6.7). If the drives are connected with USB 2, they boot normally. The FireWire drives appear in the Start Volume program, but they do not boot. If I press and hold the Alt key while booting, only the internal drives and the USB drives appear as options. What can I do in order to boot from FireWire drives as I always could in the past?

I'd first recommend doing a SMC reset and if that doesn't work refer to:
http://reviews.cnet.com/8301-13727_7-10333969-263.html
and
http://www.thexlab.com/faqs/firewiretroubleshooting.html
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Roger

Problems booting from external drives

Ever since I got this 6-core 2013 MacPro (January 2015), I have had strange problems and glitches, but for this posting, I am talking about problems being able to boot up from external drives. I took the 4 external drives out of my old 2009 MacPro and put them into a 4-bay Thunderbolt enclosure. This enclosure can be configured as a RAID if all drives are the same (which they are not) or it can just be a place to be able to access all 4 drives. I used to be able to boot from each of those drives on the older MacPro but I am unable to do so now. They show up in the System Preferences/Startup Disk but if I choose one, it just reboots into the new MacPro drive. I even tried pulling out a couple of the drives and mounting each into a USB 3.0 (Sabrent) dock and still I could not boot from those drives which have the latest version of Yosemite. Yes, they are formatted correctly. I used to boot from them. I was able to clone one of the drives to a Seagate USB 3.0 hard drive and boot from that. Although, the clone was not perfect. It didn't transfer all my settings so I could recover some logins and serial numbers I wanted that I have never been able to retrieve since I got this new Mac.
Yesterday, I formatted a 32GB flash drive and tried to install Yosemite on it. I planned to put DiskWarrior on it. When I started to install Yosemite (from a saved download) it let me choose that drive, but when it restarted before installing, I was right back where I started on my MacPro's hard drive.
Is this normal behavior for the 2013 MacPro? Or is it just mine? I am beginning to think I may have a lemon since I have had other strange problems that don't go away.

Not all external devices are bootable. First stop would be involve whoever handles the 4-bay Thunderbolt. Seeing how it has a bridge most likely in order to support RAID mode that may not have the correct frmware or other reasons.
https://bombich.com/kb/ccc4
https://bombich.com/kb/ccc4/search/bootable%20volume
CCC is the only program I would be using.

Novice here: can video from thumb drive be imported to iPad 2 with the connect kit? If so how. I have a thumb drive with video on it but iMovie doesn't seem to detect it.

Can video from thumb drive be imported to iPad 2 iMovie with the connect kit?

emory53, I'm going to see if the Moderator of this Discussion group can place this question in the iMovie for iOS Discussion Group (yes there are two, count'em two iMovie Discussion Groups) hopefully that will happen shortly.

Satellite P300-1A8 will not boot from disc drive

Hi,
I had a little play with start up programs, partitioning the hard drive and marking as active and deleting programs i thought i did not need.
I obviously had no idea what i was doing!
Laptop will go to toshiba screen then goes blank, i can not boot from the disc drive.
I put the hard drive into another laptop and it works fine.
I put the hard drive of that laptop in the buggered one and that works fine.
How the hell do i put the original one back with it working??
Really really stuck with this!!!!!
Any help would be appreciated.
Only thing i havent tried is the recovery disc but im not paying for one if it wont boot as itl be a waste of money.
Seems like its a compatability problem with cpu and hard drive as they dont want to be friends anymore!!
Thank you in advance

Hi!
Can you boot in the safe mode?
If you dont have a recovery disk, use the Microsoft installation disk and try to boot from it.
And you said that you cant boot from disc drive, did you tried different disks?
Maybe some are not readable or not bootable.
The best way would be a recovery disk. The installation takes a few minutes and you have a clean installation with all drivers and tools from Toshiba.
Bye

Sccm boot from thumb drive - failed to find task sequence.

Similar Messages

Maybe you are looking for