SCCM Client Configuration Tab missing and actions are also missing
Hello All,
Stuck from few days in installation of Client in Secondary Site. Actions are missing in tab and Configuration Tab is also missing.
1. Boundaries and Boundaries Group are properly configured
1a. Client Push installation is performed through Primary Site
2. Client Push Account has Administrative Rights (Verified from CCM Log file)
3. Installation performed successfully (Verified from Log file)
4. Firewall settings are configured proper.
5. WMI repository is consistent.
6. Machine restart several times but no result
Snapshots are attached for your further reference
Need your suggestions / Help.
REGARDS DANISH DANIE
CCMEval.log File
==========[ ccmeval started in process 2304 ]====================================
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
ccmeval version: 5.0.7958.1000 CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Loading manifest file: C:\Windows\CCM\CcmEval.xml
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Successfully loaded ccmeval manifest file. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Begin evaluating client health rules. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Successfully retrieved all client health checks.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {4AB7D77D-3BB0-4EAB-BEFD-7C0F7DA10296} : Verify WMI service exists.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {518C0699-03F8-4F38-85C4-4D319EAEFC05} : Verify/Remediate WMI service startup type.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {7F4B6E15-2221-455B-9615-93C379E470D5} : Verify/Remediate WMI service status.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {14E6774A-1795-4E09-B17D-B6F36A124205} : WMI Repository Read/Write Test.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {690A959D-6210-4930-865F-E3BB82F02133} : Verify/Remediate client WMI provider.
CcmEval 8/22/2014 12:03:43 AM
1620 (0x0654)
Evaluating health check rule {A81778B5-9A1E-4A52-9C6E-6939CEFAA118} : WMI Repository Integrity Test.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {5CC6C949-5001-4765-84B4-DD4FDC1E6940} : Verify BITS exists.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {C6E29CF5-F9B2-450B-AE61-C4B256A75023} : Verify/Remediate BITS startup type.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {2F373187-6295-4CBB-BE9E-8E43C459883A} : Verify/Remediate client prerequisites.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {AD9CAF50-6602-4857-A9F4-64864EA30BDF} : Verify/Remediate client installation.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {8883C683-04C8-4228-BB76-2EDD666BA781} : Verify SMS Agent Host service exists.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {13F46523-5B82-417d-A363-A644E80CAD76} : Verify/Remediate SMS Agent Host service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {70BECB51-44A1-4b46-8A23-6EA3D345B677} : Verify/Remediate SMS Agent Host service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {C35E790D-4C05-40A8-BB46-A68578966D19} : WMI Event Sink Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {0614757F-7AA6-4933-965B-06D6A8243D0B} : Microsoft Policy Platform WMI Integrity Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7EF00FDD-3DF0-496A-A999-AADD1B3016C1} : Verify/Remediate Microsoft Policy Platform Service Existence.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D9D0245D-0617-4C2F-8837-84A397AC5B22} : Verify/Remediate Microsoft Policy Platform service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {09886543-BE8B-431F-BC00-7D917632E22C} : Verify/Remediate Antimalware service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {5B50566C-363E-4F1C-8A7D-6F2D2A51B142} : Verify/Remediate Antimalware service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {6BC824B4-BD8C-4779-BB10-ABDBCD5AFAEB} : Verify/Remediate Network Inspection service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Failed to get SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection\DisableIntrusionPreventionSystem
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D6CB32EA-423D-44CB-9C58-97CE55D2148E} : Verify/Remediate Windows Update service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {E8030BE0-B773-4742-B6A1-0870CF139117} : Verify/Remediate Windows Update service startup type on Windows 8.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9040BA8C-580D-4FCA-8846-BBD5F5BB1597} : Verify/Remediate Configuration Manager Remote Control service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9DCD49EF-E021-46FF-A777-49210B558527} : Verify/Remediate Configuration Manager Remote Control service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {934F12E3-295E-4BA0-AE0F-09859685720F} : Verify/Remediate Configuration Manager Proxy service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {43029EED-EB9D-4E35-A5F7-7FDD93EC8C57} : Verify/Remediate Configuration Manager Proxy service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7B9F8FF6-EDF7-42CA-A67F-073A2E161C19} : Verify/Remediate SQL CE database is healthy.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Successfully evaluated all client health rules.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get integer from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get MPFailCount from registry, restart counting from 0
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8E1768FD-5FB5-4191-A804-F26D05EB636C";
DateTime = "20140821190415.358000+000";
HostName = "uekkisc001.uead.uep.com.pk";
HRESULT = "0x00000000";
ProcessID = 2304;
StatusCode = 0;
ThreadID = 1620;
CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Client's current MP is http://uekkisc001.uead.uep.com.pk and is accessible
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
MP check succeeded CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Send previous report if needed. CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get string from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
There is no previous report sent CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Previous send is not complete, need to send report this time.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Begin to send client health status report CcmEval
8/22/2014 12:04:16 AM 1620 (0x0654)
Successfully sent client health status as a state message.
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
==========[ ccmeval finished normally in process 2304 ]==========================
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
REGARDS DANISH DANIE
Similar Messages
-
I was able finally to delete unwanted text boxes in my Pages document; howver, the result is that the 2nd page of my document is missing and there are now several following pages in a language that appears to be latin. What sin have I committed and how do I atone?
10 marks for recognising the Latin (sort of) that is the placeholder text in your template.
You are using a Word Processing template. WP templates have content flowing from page to page. As one page fills up, a new one is created. If some of that text is deleted or displaced the pages retract.
When you combine text, invisibles like word spaces, returns, tabs, page breaks etc with objects that have text wrap set, the mix can behave in an apparent odd fashion.
Start with showing where everything is:
Menu > View > Show Layout/Invisibles
Start with getting rid of any excess returns you may have used to "position" things. Next cut and paste objects like textboxes, shapes, charts and tables "Inline" ie in as part of the text. If necessary also turn off text wrap on objects or minimise it so that doesn't push text completely out of the way.
Insert Section breaks in the Text where you want fixed breaks in the layout these will provide separation between layout on different pages.
Basically you need to clean up your layout or think about doing it another way.
If there is a lot of layout, you will need to learn Pages methods for doing this in a WP template or do it in a Layout template where each page is individual and all objects are floating with no default text area.
Peter -
Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.
You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
some photos in iphoto are missing and there are blank thumbnails which when i try to open them show an exclamation sign
The exclamation make is an indication that iPhoto has broken the file path to the original photo.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Safe Title and Action Areas ...screwy set up!
Does Adobe Premiere have the Safe Title and Action Areas set up ...backwards? (i.e screwy)
I am resetting the areas according to latest Broadcast specs ( New Zealand) issued by BC Authority. '2012 Commercial Production Standard'
Quote from Spec sheets
High Definition (1920 x1080) with 4:3 Graphics safe and 14:9 Action Safe areas
14:9 Action Safe = 80% of 16:9 Width . 93% of Height
4:3 Graphics Safe = 65% of 16:9 Width . 90% of Height
So one reads that as: area covering 80% width and 93% height (and respectively area covering 65% width and 90% height)
(Area is the operative word as in Safe Area)
If these figures are entered into Premiere Project Set up..they display small areas. Inverse size.
Not areas proportional to the figures describingthe area. eg 80, 90 and 93% are certainly closer to 100% ( the whole area)
So what gives here?
FWIW: In the past I have used the 20, 20 and 10, 10 set up ..without actually thinking why it was done this way!
Out of interest : anyone got access to these specs for BBC or U.S stations. How are they described?
Here is how Wiki describes the safe area
http://en.wikipedia.org/wiki/OverscanThanx for posting that.
BTW: See Page 11 for the way BBC prescribe setup for Safe action Area.
Like NZ BC..it describes the inclusive safe area. Not like Premieres (screwy excluded area setup)
14:9 Caption safe
70% of Active Width
90% of Active Height
289 – 1632
55 – 1026
48 to 532 (F1) and 611 to 1095 (F2)
Be keen to see some U.S Specs -
I restored my iPad 2 from the iTunes backup but my music, audio books and iBooks are all missing.
I restored my iPad 2 from the iTunes backup but my music, audio books and iBooks are all missing. It seems only the Apps were restored and settings. Anyone else had this problem?
Oh and the bizarre thing was that when I opened iBooks for the first time after the restore it showed all the books in the open collection and then they vanished in front of my eyes!
-
The App store, FaceTime, iTunes, Safari and Camera are all missing from my iPad. Restrictions are not enabled and when they are those applications are grayed out. I have tried everything but restoring my iPad to its orginal condition. What do I do?
todaywillbegreat wrote:
''' I have tried everything but restoring my iPad to its orginal condition. What do I do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
Have iMac with IMAP email, 3rd party. Use a rule to sort emails into various boxes. One box does not appear on Mail in new iPhone 5C. Emails sorted into that box are also missing. Any suggestions?
In which this just gets weirder and weirder...
I logged onto iCloud.com, signed into my account and created a rule there that emails from my husband's address should be allowed into the inbox. I sent another test msg from him to me and got the New Mail notification sound, the new mail showed up but in a flash disappeared. This happened in the space of about 3 seconds.
Messages from his email address are not even showing up in the Trash folder. WTH? -
Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.
Since other millions of people updated and do not have that problem - it means one of two.
1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
here are instructions for restore and you may have to backup before restore.
iTunes: Restoring iOS software - Support - Apple -
Missing photos in iPhoto, also missing in Time Machine
Today I just noticed that 1000s of my photos are missing from iPhoto. All photos are missing previous to mid-May 2011 when I believe I upgraded iPhoto '08 to iPhoto '11.
They are also missing from all my Time Machine backups going back to Jan 2011 which makes me fear the worst. I have scanned using Data Rescue 3 (as suggested in an archived thread) but I don't see anything recoverable.
I am running:
- iPhoto 9.1.1
- MacOS X 10.6.8
Any advice on other things to try?
RickI just want everything from the old computer to be on the new computer, so I don't feel like I need to merge the libraries.
You will need the paid version of iPhoto Library Manager only to merge libraries. If you do not need to merge anything, you can skip that step.
So just try, if copying to an external disk and then to your new mac as Old Toad recommended will do the trick and transfer everything safely. -
How to configure Follow up and Actions in ICWeb Client.?
Hi Experts,
Please guide me to configure Followup and actions in IC web client.
Regards,
SheetalHi ,
follow this
Actions
IMG>CRM>Basic functions>Actions>Actions in transaction>chnage actions and conditions>define action Profile --> action definition
Maintain action settings
Partner dependency
Processing Type-->form name ->reminder mail say
Class ->CL_DOC_PROCESSING_CRM_ORDER
Method ->CRM_ORDER_EXEC_SMART_FORM
Define condtions
Schedule and start conditions are to be maintained if any
This action profile needs to be added to your transaction type .
Aftre this check if the action is visible in your transaction online .
This transaction should be the same as your Business transaction profile in ICWC
Hope this helps
Let me know if still stuck
Cheers! -
Hi All,
What is best practice for automatic installing of SCCM 2012 client Patches
(using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
I need information for:
OSD
Client Push Installation
Thank you in advance.
Regards,Not everything that can be or is supported or not supported is documented (or ever can be):
http://technet.microsoft.com/en-us/magazine/jj643252.aspx
Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
For clientpatch, here's the specific documentation noting it as unsupported:
http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
know that at least those exist and probably more since it is, as mentioned, abandoned code.
Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
Jason | http://blog.configmgrftw.com -
Firefox is bogged and does not reload right.. Firefox Persona's is missing..
iGoogle when down nearly 2 weeks ago and my iGoogle homepage went missing in action, all gadgets gone, just a blank page, NOTHING worked, all steps did NOT restore it, AND the help forum had some rude employees. The help forum details page is totally and utterly disabled and all you can do is type in the subject line your query and hope they answer, But you cannot type in the box when it asks for details so I had to type that issue also in the subject line, then one female told me from Google and rudely "funny I'm not having a problem with the help forum pages, nobody else is either" something like that but snappy... And rude, NOT helpful at all..
I'm wondering if Google knows their employees do this because frankly I buy goods and services quite often, its enough to cause me to go somewhere else and even spend a little more for nicer helpers... Anyway... I did all steps over there, Nothing restored my gadgets.. Nobody helped over there EXCEPT to say its all Firefox's fault.
So that is why I am here... To get help.. no settings over at Google or Firefox have I changed.. But Google did go down nearly 2 weeks ago with ALL blogs, many hundreds lost some important posts. After I spoke with the female it was after blogger came back online.... Then today my settings on myblogger was changed, one minute they are fine, the next they are different colored texts.. The type of background I use there, you have to manually go in to change the background FIRST before you change the text color, both of which I never did and yet someone went in there today to do this.
sorry for venting, very frustrated with service there.. It only stands to reason that if blogger went down and it happens to be exactly when I lost all gadgets etc, that they need not blame firefox for it... YET though blogger came back up the issue with the gadgets and entire iGoogle homepage is utterly still at hand, so I thought to write to their help forum but to get SLAMMED by a female that would be better off doing a boxing match in an amateur event rather then being impeccably a customer service agent that cares about customers and people.
I wanted to upgrade to firefox 4 BUT I heard there were some glitches not worked out yet, and I was worried not knowing if since I'm already having a glitch problem if it would make it worse to upgrade.
so firefox is not loading right, it is also not showing Persona.. And iGoogle is not working right either, not sure if Google and you have a connection but they keep saying its all Firefox's fault.
can you help me? I hope so... I love firefox and I had to use Opera today only because it was so bad that I had no choice.. Opera works fine but its firefox that I want..
take care,I wish it were that but a long time ago when I had a problem with the gadgets with iGoogle back 6 months ago thereabouts I was asked to disable it then and I did and I just went to re-check and it is still not enabled, however, it will not let me un-install it though.. It only gives me an option to enable or disable.. Any advice ? So I'm wondering if it is something else still or is there a problem with the avast still ?
thanks again for your help. Mind you that this all started when blogger went down ..
take care -
Sccm client v4 wont install and install client v5 - SCCM 2012 R2
Hi, I am coming to the end of a SCCM 2012 R2 client deployment. I have come across 2 machines (so far)that have the SCCM 2007 (v4) client installed, and although the task is set to uninstall from the server the v5 client will not installed. iI have been
using this an as template:
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
I have ran the install seperatelty from the server (boxed ticked - Uninstall existing Config Manager client) - No Install
The ccmsetup folder is created - c$\Windows\ccmsetup, but only has 3 files, no logs folder
Other machines on site has the v5 client
Checked ping from client to server and vice versa (no firewall enabled)
Boundaries/Schema/DNS - ok
Checked all local event logs.
i know you can run the local uninstall command, but as the network is vast i would like to fix to come from the server, rather than having to do this on the client.
Any tips would be great going forward.
SCCM 2012 R2 - Windows 7 Enterprise SP1Hi,
I ensured the account used for the install was in the local admins group.
From the ccm.log on the server, i got these erros, been googling but nothing yet:
---> ERROR: Unable to start service "ccmsetup" on machine "LCD12121", error = 1075. SMS_CLIENT_CONFIG_MANAGER 22/10/2014 12:01:43 1460 (0x05B4)
---> Failed to install CCM Client Bootstrap component on client (1075) SMS_CLIENT_CONFIG_MANAGER 22/10/2014 12:01:43 1460 (0x05B4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153910, 1075 SMS_CLIENT_CONFIG_MANAGER 22/10/2014 12:01:43 1460 (0x05B4)
Also, is there a way to run a report on which machines dont have the sccm client/install issues?
Thanks -
I upgrade to Iphone software version 7.0.4.All of my photos and contacts are now missing.
I upgraded my iphone to the software version 7.0.4
since the upgrade all of my photos and contacts are missing.
Any suggestions on how to retrieve?So, I guess my iPhone upgraded without me being aware. But nevertheless I am now running iOS 7.0.4.
I've noticed the last few days that I'm encountering sporadic contact disappearance. I'll get a text, the notification shows their name, maybe a few minutes later i'll go to read the full message and now no name, just a number. I'll look and ALL my contacts are gone. the conversation screen has nothing but numbers and the favorites under phone are just numbers. Search can still work by name though so the phone "knows" that joe is 555-5555, but is not showing the connection.
TEMPORARY WORKING FIX:
Turning off contacts in my icloud settings and choosing to delete the contacts on my phone, then re-enabling contacts will pull them all back down for me. This of course takes about 5-10 minutes for everything to sync back to the phone.
I've tried restarting the phone.
I've tried resetting the phone.
I don't feel like wasting my time with a backup unless I can downgrade to something before 7.0.4 as it is obvioiusly buggy.
I am NOT going to set up as a new phone until this becomes a much bigger problem.
I hope this offers insight to others encountering this bug. My mother has had this happen on her phone as well. Please comment at least if you experience this. the more people that have it, the less chance apple can play it off as an isolated event on my phone.
Maybe you are looking for
-
well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up? ipod touch 2nd gen http://gyazo.com/57a6260ece61212ba210bfe5659e399b.png
-
Apple Color won't preview clips properly and Motion crashes on startup. Do I need a new video card?
I have a 2009 8-core Mac Pro (2.26Ghz) with a GT120 graphics card. I use Final Cut Studio 3 frequently, and up until recently without any hitches. Last week, Color started previewing clips as black with touches of red (I'm assuming a readout of the c
-
Odd error message when attempting to start up iTunes
Whenever I attempt to start up iTunes it tells me "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes." It was working fine 30 minutes ago and I have the latest version installed. Can someone help me?
-
OSX Lion, Lightroom 3 & deleted files: could be a bug?
I've a library saved inside an external HD. Normally I work with this catalog, selecting the photos and elaborating the images. Last week I've made the upgrade from Snow Leopard to Lion and today I've found that if I try to delete an image, LR tell m
-
Hello, After a lot of digging around this forum i found i very useful post, it talked about a backdoor in the firmware. The thread is read only, it had been closed due to repetitive posts http://community.bt.com/t5/BB-in-Home/Why-have-BT-put-a-backd