SCCM Console install on Windows 8

I have upgrade our SCCM installation to 2012 SP1. When trying to install the console on my local Windows 8 machine, I receive the message "Microsoft System Center 2012 Configuration Manager Console does not support per-user installations".
I've tried both the .exe and .msi with the same result. Has anyone seen this before? My machine is Windows 8 Enterprise, btw.
Thanks, Brian

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
I have installed the Admin console several times on Windows 8 or Windows 8.1. However exactly are you running the msi? Exactly what command line are you using?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Can't Login in SMC Console installed in Windows

Dear All,
Kindly advice what to do to login to the smc console installed in Windows xp.
I receive the below error message when i trying to login:
" Communication could not be established with the server.
The Server version may be incompatible.
Your prompt response will be very Helpful.
Br
KABA Mamady

Hi Kaba-Mamady,
Take a look at the following forum posting for the solution of the same problem:
[http://forums.sun.com/thread.jspa?threadID=5289614]
Pegah Garousi
Halcyon Monitoring Solutions

Unable to install sccm client from SCCM console install client option

Hi
Unable to install client on windows 7 64 bit enterprise from sccm console. The client is discovered in sccm console with status client = NO, so we want to install sccm client from console remotely.
We cannot enable push install. my id has full access on SCCM site server SCCM product also admin rights on workstations. I am able to access net bios path SMS_<site code> of site server then client path from client machine. machine is in domain and
is boundry of sccm .
Client push install in console is diabled
Regards Sushain KApoor

Hi!
Examine the ccm.log located in <SCCM 2007 InstallationPath>\LOGS on the site server.
Best regards
Henrik

SCCM 2012 Installing Admin console on Windwos 7

I have installed SCCM 2012 Admin Console on a Windows 7 machine. The console installed fine by I'm now receiving this error.
This is from the SmsAdminUI.log
[5, PID:14908][04/03/2014 16:17:57] :Property: 'Features'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[5, PID:14908][04/03/2014 16:17:57] :ReadExtraProperties: Failed to initialize extra properties
[5, PID:14908][04/03/2014 16:17:57] :Transport error; failed to connect, message: 'The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version
of the site server you are connecting to and then try to connect again.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.SmsConnectionWithDetailException\r\nThe Configuration Manager Administrator console could not connect to the Configuration Manager
site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.\r\n   at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.ValidateConnectionParameters(ConnectionManagerBase
connection)
   at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nNo details are available for this error.\r\n
Ideas on what is broke. I have tried with the firewall on and off made no difference.

Hi,
[5, PID: 14908][04/03/2014 16:17:57]: Transport error; failed to connect, message: 'The Configuration Manager Administrator console could not connect to the Configuration Manager site database.
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Sccm console on windows 8.1 - window display issue

I'm currently using a surface pro 2 with win 8.1 enterprise (sccm is 2012 r2). Overall the surface is a great piece of hardware. One problem that I'm having is that the sccm console doesn't properly display wizard windows properly. They
are cut off, horizontily starting at the entire cancel button and to the right. Some times it is a vertical issue, and I can't get to tall the options on a screen. Please see the SS for an example of both horizontal and vertical cut offs.
I had monkeyed with several setting on my profile, so I signed in with a different account that had no user profile on the machine....same issue.
It's frustrating that some things I need to do on a very regular basis I now have to rdp into the server in order to do. Has anyone else seen this and does anyone have any ideas for a solution?

Hi,
If I remember correctly that is a problem related to changing the Text Size to one of the below options.
Medium - 125%. This sets text and other items to 125% of normal size.
Larger - 150%. This sets text and other items to 150% of normal size. This option appears only if your monitor supports a resolution of at
least 1200 x 900 pixels.
If you change this does it work then?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

USB Console (Serial) Driver fails to install on Windows 8.1 x64

The USB console cable driver v3.1 will not install on Windows 8.1 x64. Had a similar problem with Windows 7 x64 but this was fixed using Greg's (greggar25) excellent step-by-step procedure (see post: https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing).
I am using the driver from this link: http://software.cisco.com/download/release.html?mdfid=282774228&flowid=7442&softwareid=282855122&release=3.1&relind=AVAILABLE&rellifecycle=&reltype=latest
I followed the same procedures I did for Windows 7 and the install goes without a hitch. Reboot and connect the USB cable, opened Device Manager and now I have a COM Port randomly appearing and disappearing with its number incrementing well above 1,000.
A few times while it appeared for a few seconds, I was able to right click on the properties, update the driver and chose Cisco Serial and it settled down but it did not assign a COM port. Then a few seconds later, it starts the disappearing/reappearing thing again.
Anyone have luck getting this to work with Windows 8.1 x64?

Hi,
open Device Manager by simply typing the words on the Windows 8.1 Start Screen. The Search Charm opens and click Device Manager in the displayed list.
In Device Manager a new hardware category, CiscoUsbConsoleWindowsDriver, is displayed. It has two components: the Cisco Bus enumerator and the Cisco USB to Serial adapter. Expanding the Ports hardware category shows a new Cisco Serial port.
or
Look into below
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing
1) Install the usb console driver\windows 64\setup(x64)
2) Follow the wizard and accept the defaults
3) Restart the computer (the installer usually says it needs a restart)
4) After restarting the computer, plug in the usb cable
5) The computer should say installing Device driver software and fail at the Cisco Virtual Comm Port00
6) Click the Windows button, right click computer, manage
7) Under Computer Management, Click Device Management
8) Go to Ports (COM & LPT)
9) You should see the Cisco Virtual Comm Port00 with a Yellow Exclamation point on it
10) Right Click on the Cisco Virtual Comm Port00 and select Properties
11) Click the Driver Tab
12) Click Update Driver
13) Select Browse my computer for driver software
14) Select Let me pick from a list of device drivers on my computer
15) Choose the Cisco Serial Driver
16) Device Driver is installed successfully, take note of the com port it is using and enjoy.
HTH
Sandy

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

Can't access the recovery console after installing the Windows 7 RC

Hi all,
I recently installed the Windows 7 RC to give it a go but I've found that it kills my battery life so I decided to go back to vista, however when I press the blue button on start up to access the recovery console I just get a screen that asks me if I want to enter the BIOS or choose another boot location... I used the upgrade option in Windows 7 so I don't see how I could have deleted the partition with the recovery console...
Is it posible for me to restore my tablet to it's factory settings?

The install of Win 7 removes the TVT boot manager applet and sets the master boot record to Win 7 partition only.
The Lenovo supported method of restoring your preload would be thru the use of Recovery CD's.
You might be able to change the bootable partition from the win 7 partition to the recovery partition, thru some
3rd party apps.
Terry
LESE
Win 7 beta test

Migration of a Windows 2008 Domain to 2012 with SCCM 2012 installed

Hey there,
i have been requested to migrate two 2008 Domains to 2012 with a possible merge.
Done this many times, but in this case i have a SCCM 2012 installed in the Environment.
SCCM is not covered by me, but i would like to have some aditional Background on this...
Are there any Special Points to give Attention to?
Any Hints or Ideas on this?
Best regards
Chris
btw: i still found, that i am not "allowed" to migrate the sccm itself, but Need to reinstall it...

i have been requested to migrate two 2008 Domains to 2012 with a possible merge.
Done this many times, but in this case i have a SCCM 2012 installed in the Environment.
btw: i still found, that i am not "allowed" to migrate the sccm itself, but Need to reinstall it...
Lets say you have two domains - Domain 1 and Domain 2. Both have W2008 DCs. SCCM 2012 has been deployed to Domain 1.
You could just upgrade to W2012 DCs in Domain 1, then migrate Domain 2 resources to Domain 1.In this way SCCM is unaffected.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM console connection problem to SMS provider

I have installed sccm in the bolw deisgn for the lack of Cluster test environment. It is just to test SCCM HA.
SQL 2008 and SCCM 2012 Site server in two separate physical box(win 2008) and installed additional sms provider to another windows 2003 box. I am trying to connect the console installed on SQL box to new SMS provider(win 2003 box). It does
not connect. What could be the reason? Is it possible by technology at all or not? If it is, how could it be possible?
Thanks
Rafiqul

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Overrides not visible in SCCM Console

I have SCCM2007R2 en FEP2010 console installed on my management PC (Windows 7 enterprise 64-bit). I Also have the FEP2010 client installed. Now I can not see the Overrides in the FEP Policies I defined in the Antimalware tab on the SCCM server.
I'm getting a message instead which states that I have not installed the FEP client or that the client is not up to date. But the client is installed and up to date. All the other screens are working fine, just not the overrides.
Windows 7 rulez!

This is old post and there have been several changes in FEP, now the successor of FEP is System Center Endpoint Protection (SCEP) and several things been improved. Try reproduce your issue in SCEP and if problem persist, please post it as a new question.

SCCM console crashing on all computers

Hi all,
From 2 weeks ago we observed that sccm console is not working any more on all desktops. We tried to reinstall , fresh install nothing. The error is:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: LRE420M52QQYT0KWXNWESOVVMQF5I2RH
Problem Signature 02: 5.0.0.0
Problem Signature 03: 5230d1aa
Problem Signature 04: mscorlib
Problem Signature 05: 4.0.0.0
Problem Signature 06: 4ba1da6f
Problem Signature 07: 3aa4
Problem Signature 08: 4
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 6153
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any ideas?
Thanks

I find a new error on logs on client computer:
DCOM got error "2147942487" from the computer sccm_server when attempting to activate the server:
{8BC3F05E-D86B-11D0-A075-00C04FB68820}
That it was I think from un authorized user.
The logs in event viewer are:
Net Framework:
Application: Microsoft.ConfigurationManagement.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
   at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
   at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
   at System.Delegate.DynamicInvokeImpl(System.Object[])
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.DispatcherOperation.InvokeImpl()
   at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
   at System.Windows.Threading.DispatcherOperation.Invoke()
   at System.Windows.Threading.Dispatcher.ProcessQueue()
   at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Threading.Dispatcher.Run()
   at System.Windows.Application.RunDispatcher(System.Object)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.EnterpriseManagement.ConsoleFramework.ConsoleApplication.LaunchWindow()
   at Microsoft.EnterpriseManagement.ConsoleFramework.ConsoleApplication.Run()
   at Microsoft.ConfigurationManagement.AdminConsole.Program.Main()
SCCM:
Faulting application name: Microsoft.ConfigurationManagement.exe, version: 5.0.7958.1000, time stamp: 0x5230d1aa
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0xe0434352
Fault offset: 0x0000c42d
Faulting process id: 0x1a50
Faulting application start time: 0x01d01922d7aa0074
Faulting application path: C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\Microsoft.ConfigurationManagement.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: aa138f22-8516-11e4-be90-f0921ce0f7f5
And:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: LRE420M52QQYT0KWXNWESOVVMQF5I2RH
P2: 5.0.7958.1000
P3: 5230d1aa
P4: mscorlib
P5: 4.0.30319.34209
P6: 534894cc
P7: 3f3d
P8: 0
P9: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
P10:
Attached files:
These files may be available here:
C:\Users\x\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_LRE420M52QQYT0KW_699c3050be893a5865557b47e6987e0fcc2e03e_03dcf460
Analysis symbol:
Rechecking for solution: 0
Report Id: aa138f22-8516-11e4-be90-f0921ce0f7f5
Report Status: 0

SCCM console crashes when starting remote tools

I use SCCM console on 2 different Windows 7 computers. The working one is x86 and the non-working one is x64. The nonworking one is my main computer which is x64. It has worked in the past. So it is not a user permissions issue. When I try to use remote
tools to help users out with issues, I get the error posted below. I have not found much on this issue except to install .net, which I do have installed, as well as SP2 for SCCM. The server is also up to date with updates. I am the only one with this error
in my department of 8 people, all have no reported issues.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations
have been applied. An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied. at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message&
m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Bechir,
Here is the smsadminui.log
[3][3/1/2011 4:28:58 PM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/1/2011 4:33:01 PM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[7][3/1/2011 4:35:54 PM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[7][3/1/2011 4:36:31 PM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[7][3/1/2011 4:36:44 PM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[7][3/1/2011 4:55:34 PM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 7:57:14 AM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/2/2011 8:01:19 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:01:23 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:01:27 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:01:48 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:02:47 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:02:53 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:02:59 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:53:10 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:53:28 AM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/2/2011 8:58:28 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 8:58:32 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/2/2011 12:08:25 PM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/3/2011 7:47:09 AM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/3/2011 7:49:55 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/3/2011 7:50:14 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/3/2011 8:47:32 AM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/3/2011 8:47:57 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/3/2011 9:14:06 AM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/3/2011 9:14:26 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/3/2011 9:14:30 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/3/2011 9:14:34 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/5/2011 12:12:01 PM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/7/2011 9:23:41 AM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/7/2011 9:24:16 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/7/2011 9:30:29 AM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/7/2011 1:40:47 PM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/7/2011 1:42:12 PM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
[3][3/7/2011 2:08:33 PM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][3/7/2011 2:09:04 PM] :An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
   at Microsoft.ConfigurationManagement.AdminConsole.Common.SmsListView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

SRM MDM Installation error :MDM Console Install.exe-Bad Image

Hi,
I have installed SRM 5.5 and need to install SRM MDM, but when i am trying to execute MDMConsole Install from GUI _CLIENTS folder getting below error.
:MDM Console Install.exe-Bad Image
The application or DLL C :\windows\~GLC0000.TMP is not a valid windows Image, Please check this against your installation deskette
I tried to execute other installables also getting same error
Please advice is something is missing
Thanks,
Jai

Thanks to all,
Downloaded the installable from maket place and it works now.
I think I tried 64 bit setup earlier
Regards,
Jai

Not able to sign in to Company Portal app installed from Windows Store

Not able to sign in to Company Portal app installed from Windows Store .I'm using Workplace joined (Intune + SCCM 2012 R2) Windows 10 Laptop.
Following is the error which I got while trying to sign in with my Intune trail account
Any idea much appreciated :)
--- Exception Details ---
System.Exception: Authentication failed because response data could not be parsed.
Stack Trace:
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<AuthenticateAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateAsync>d__b.MoveNext()
2014-10-30T17:44:27.6437234Z
VERB MethodEnter
Common 1800
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Enter
2014-10-30T17:44:27.6437234Z
INFO Event
None 0
User is not authenticated, monitoring is not capable.
2014-10-30T17:44:27.6437234Z
VERB MethodLeave
Common 1801
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Leave
2014-10-30T17:44:27.6437234Z
VERB MethodEnter
Common 1800
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Enter
2014-10-30T17:44:27.6437234Z
INFO Event
None 0
Attempting to delay polling task for '30' seconds.
2014-10-30T17:44:45.9431915Z
INFO Event
Application 611
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 WebAuthenticationBroker AuthenticateAsync to url: https://go.microsoft.com/fwlink/?LinkID=314087&&appru=ms-app://s-1-15-2-2666988183-1750391847-2906264630-3525785777-2857982319-3063633125-1907478113/&api-version=1.1
returned result:Success
2014-10-30T17:44:45.9431915Z
INFO Event
Application 611
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 WebAuthenticationBroker returned result:Success
2014-10-30T17:44:45.9744572Z
INFO Event
Application 208
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Authentication failed because response data could not be parsed.
Exception:
System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0) like Gecko") does not contain match for Windows version regex pattern ("Windows
NT (?<Version>6\.2|6\.3)").
Parameter name: userAgent
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData.GetWindowsVersion(String userAgent)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData..ctor(String responseData)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
Response Data:
wresult=eyJ0eXAiOiJKV1QiLCJhbGciOiJodHRwOi8vd3d3LnczLm9yZy8yMDAxLzA0L3htbGRzaWctbW9yZSNyc2Etc2hhMjU2IiwieDV0IjoieE42Z05aYlhvYmRRMkhhbl8yT08xTUZ1SHFZIn0.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.bZmz4BNmW1sg90bmUED-y0gSpR3qFfHpBZz6jf_7pMIEiO-n8TF8aPryDgLE0_pOXBBxjGZj2CjvvCjKE3xtc_RCfQ66f8sPjJDk5nDn87Zqr3nuybcWyr_QJzLAV-wrqBQyZbhiKXjAHByQfovl25EJEljwiYc8gvDAh6mSpOiSNDRo51iycmtFPJVg9SLomONTtrIvNI-c4OksER4smKiuV989EBxA2IUUbuUMpEXArFBtAJMQe4IyDCdVV_c-45i69cVNeIjcc9WkzgUx4wkdMOVXY-TVKGkyW67Iu62dU_3fJhRJ6Cc_ZfSFWby-QB9Vj-1qu3LdtkU4z4LX_Q&tokenCookie=eyJ0eXAiOiJKV1QiLCJhbGciOiJodHRwOi8vd3d3LnczLm9yZy8yMDAxLzA0L3htbGRzaWctbW9yZSNyc2Etc2hhMjU2IiwieDV0IjoieE42Z05aYlhvYmRRMkhhbl8yT08xTUZ1SHFZIn0.eyJpc3MiOiJ1cm46aW50dW5lOm9hdXRoMjpjMWIwMWVmNS00ZTE3LTRkODMtYTMyMC1jYWZkOTE1YzJmYWUiLCJhdWQiOiJ1cm46aW50dW5lOnNlcnZpY2UiLCJuYmYiOjE0MTQ2OTEwNzksImV4cCI6MTQxNDY5MjI3OSwiVGVuYW50SWQiOiI1ZjZiMDRjOS1lZWZhLTQ4ZDYtYTEyZi02NDNkMDYxZjBhYjkiLCJVc2VySWQiOiJkZDZhNmRiOC0zZjdhLTQwODQtOWZhMS0xOThkNWNhMDkwNWIiLCJMaWNlbnNlIjoiU0NDTSIsIkF1dGhvcml0eSI6IlNDQ00iLCJSb2xlIjoiNmNiYzg0MDMtNjU2Yi00ZjA1LTc4ZDgtMDAwMDAwMDAwMDAxIiwidHlwIjoiVXNlciIsImp0aSI6IjA2YTEwNDgzLWFmM2MtNGIwZS1iNzNjLTU1YTVlZGE2YTI0MSIsIlZlcnNpb24iOiIxLjEiLCJJc3N1ZUluc3RhbmNlIjoiMTAvMzAvMjAxNCA1OjQ0OjM5IFBNIn0.bZmz4BNmW1sg90bmUED-y0gSpR3qFfHpBZz6jf_7pMIEiO-n8TF8aPryDgLE0_pOXBBxjGZj2CjvvCjKE3xtc_RCfQ66f8sPjJDk5nDn87Zqr3nuybcWyr_QJzLAV-wrqBQyZbhiKXjAHByQfovl25EJEljwiYc8gvDAh6mSpOiSNDRo51iycmtFPJVg9SLomONTtrIvNI-c4OksER4smKiuV989EBxA2IUUbuUMpEXArFBtAJMQe4IyDCdVV_c-45i69cVNeIjcc9WkzgUx4wkdMOVXY-TVKGkyW67Iu62dU_3fJhRJ6Cc_ZfSFWby-QB9Vj-1qu3LdtkU4z4LX_Q&userId=dd6a6db8-3f7a-4084-9fa1-198d5ca0905b&tokenExpiry=1196&serviceLocatorUrl=https%3A%2F%2Fmanage.microsoft.com%2FRestUserAuthLocationService%2FRestUserAuthLocationService%2FServiceAddresses&userAgent=Mozilla%2F5.0+%28Windows+NT+6.4%3B+Win64%3B+x64%3B+Trident%2F7.0%3B+MSAuthHost%2F1.0%3B+rv%3A11.0%29+like+Gecko
2014-10-30T17:44:45.9744572Z
VERB MethodLeave
Common 1801
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService - AuthenticateAsync() Leave
2014-10-30T17:44:45.9744572Z
ERR_ Event
ViewModel 2202
c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 System.Exception: Authentication failed because response data could not be parsed. ---> System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0)
like Gecko") does not contain match for Windows version regex pattern ("Windows NT (?<Version>6\.2|6\.3)").
Parameter name: userAgent
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData.GetWindowsVersion(String userAgent)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.AuthenticationResponseData..ctor(String responseData)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of inner exception stack trace ---
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<UpdateContextFromAuthenticationResponseAsync>d__c.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.DataAccess.Service.IntuneAuthenticationService.<AuthenticateAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateAsync>d__b.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Management.Services.SelfServicePortal.ViewModels.ServiceLoginPageViewModel.<AuthenticateWithExceptionHandlingAsync>d__6.MoveNext()
==========================================================
2014-10-30T17:44:57.6486693Z VERB
MethodLeave Common
1801 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Leave
2014-10-30T17:44:57.6486693Z VERB
MethodEnter Common
1800 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Enter
2014-10-30T17:44:57.6486693Z INFO
Event None
0 'Microsoft.Management.Services.SelfServicePortal.Common.Portable.DataAccess.IApplicationsRepository' is not registered, monitoring is not capable.
2014-10-30T17:44:57.6486693Z VERB
MethodLeave Common
1801 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - CheckMonitoringCapable() Leave
2014-10-30T17:44:57.6486693Z VERB
MethodEnter Common
1800 c199f6f0-1d13-415a-be16-3ec1a41dcda6
3-0-0 Microsoft.Management.Services.SelfServicePortal.ViewModels.Common.ApplicationStatusMonitor - DelayPolling() Enter
2014-10-30T17:44:57.6486693Z INFO
Event None
0 Attempting to delay polling task for '30' seconds.
==========================================================
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

I just noticed the same. Looking at the following error message it seems to do a version check and based on the results of that check I would think that it's not supported yet.
System.ArgumentException: User agent string ("Mozilla/5.0 (Windows NT 6.4; Win64; x64; Trident/7.0; MSAuthHost/1.0; rv:11.0) like Gecko") does not contain match for Windows version regex pattern ("Windows NT (?<Version>6\.2|6\.3)").
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM Console install on Windows 8

Similar Messages

Maybe you are looking for