SCCM DP migration

Hi Team,
We are currently middle of migration and new installation. I am using SCCM2012 R2 CU2
Some of the 2007 secondary servers are going to replace next 2 month, so that location we got new PC we are installing DP share there. My question
Is it possible I can copy all the SCCM2007 SMSPKG share and paste in new sccm2012 DP share (both server are in same office).. to convert by manually..?
2. How SCCM2012 converting package at the time of migration (sccm2007 to sccm2012)
Bcoz we have more than 60GB file available. if any way to convertion?
Thanks

http://blogs.technet.com/b/system_center_in_action/archive/2012/04/26/distribution-point-migration-from-configuration-manager-2007-using-the-migration-feature-of-system-center-2012-configuration-manager.aspx
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • SCCM 2007 Migration to SCCM 2012

    Hello,
    I read http://social.technet.microsoft.com/Forums/en-US/58ba35e5-d84e-4741-8089-624f5269a2ca/sccm-2012-design-consideration-advice?forum=configmanagergeneral&prof=required with the following notes:
    Secondary vs. DP is a subjective call based on two factors: client count and available bandwidth. More clients and/or less bandwidths means secondary site, less clients and/or more bandwidth means DP. Both use a server OS so there's really no cost difference, just some added complexity for a secondary site. Without knowing the bandwidth, no way for me to be able to say one way or the other.
    As for IBCM, correct, it's no a primary site server, it's simply a site system that typically hosts an MP, DP, and SUP. The App Catalog Website Point is also applicable.
    Are you planning on managing legacy mobile devices or Mac OSX? If not, the Enrollment Proxy Point is not needed -- it's not applicable to IBCM anyway to my knowledge.
    Also, the FSP must be on a separate site system so that clients can communicate with it via HTTP.
    I have for now two sites:
    - 25,000 Desktops on one site
    - 1,500 Servers on the second site
    in SCCM 2007 I had three sites: One Parent doing the reporting and two child sites handling the inventory, distribution, etc... (No SUP do far)
    I have on each child sites 1 DP.
    What should be changed for SCCM 2012?
    What is "More Clients" or "Less Clients" ?
    "More Bandwidth" or "Less Bandwidth"?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Hello Dom,
    If you have Two Primary servers you may need to plan for a CAS (Central administration site), in SCCM 2012 when you have more than one primary server you need a CAS to connect them. But remember the CAS does not
    process any client data, DPs nor MPs (hardware nor software inventory), and bear in mind that a primary stand-alone can support up to 100,000 clients, and in SCCM 2012 the big idea is to simplify the hierarchy. So if you have a primary site you can manage
    a lot of clients, and you can separate them in your case in boundaries, boundaries in 2012 do two things: Site assignment and content lookup, but they only work with boundary groups, in which you set the limits in the boundary, and latter associate it with
    a boundary group.   
    You can then just have a primary server and remote DPs, and decide how the clients will look for content in the DPs with the boundaries and boundary groups. The bandwidth needs to be really important about sending
    packages between sites, or if the boundaries are not configured properly the clients can end up looking for content where it should not.  Also don’t forget about fallback packages and content, because DPs and packages can be set as fallback, so if clients
    cannot find in a local DP they will search those packages.
    Below a few references that may help you with your migration.
    Any more questions, please let me know.  
    References
    ==========
    Planning for Configuration Manager Sites and Hierarchy
    http://technet.microsoft.com/en-us/library/gg682075.aspx
    Planning for Sites and Hierarchies in Configuration Manager
    http://technet.microsoft.com/en-us/library/gg712681.aspx
    Migrating Hierarchies in System Center 2012 Configuration Manager
    http://technet.microsoft.com/en-us/library/gg682006.aspx
    VIDEOS
    ========
    Configuration Manager 2012: Plan, Deploy, and Migrate from Configuration Manager 2007
    http://technet.microsoft.com/en-us/video/configuration-manager-2012-plan-deploy-and-migrate-from-configuration-manager-2007.aspx
    Microsoft System Center Configuration Manager 2012: Plan, Deploy, and Migrate from Configuration Manager 2007 to 2012
    http://channel9.msdn.com/Events/TechEd/Europe/2012/MGT313
    Cheers,
    Renato S. Pacheco

  • SCCM 2012 migrate server A to Server B.

    Right now I have BACKOFFICE running Windows 2008 R2 server which has SCCM 2012 SP1 installed and is in production. I did a newly installed of another primary stand alone SCCM 2012 SP1 on SCCMSERVER running Windows 2012 R2. My question are
    1. What is the best way to migrate all of BACKOFFICE ConfigMgr 2012 database or roles into the new SCCMSERVER. What tools or steps can I use to do this?
    2. When can I safely uninstall ConfigMgr 2012 off BACKOFFICE ?
    Thanks for your help,
    Voev

    The steps are the same. You set up a source hierarchy and then create migration jobs.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Types of SCCM 2007 to SCCM 2012 Migration

    Hi all,
    Can i know what are the different types of migration we can do from sccm 2007 to sccm 2012 ?
    Thanks

    Hi,
    There are now in-place upgrade so the only option you have is side-by-side migration. Install the new Configuration Manager 2012 infrastructure and migrate you objects, client e.t.c to all the new CM 2012 site server.
    Here is a link that will get you started:
    http://technet.microsoft.com/en-us/library/gg699364.aspx
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • SCCM 2007 migrated clients (SCCM 2012) are still visible

    Hi,
    We migrated some SCCM 2007 Windows 7 clients to SCCM 2012 (upgraded the clients via push).
    This worked fine for most of the clients but not all so I cannot just delete clients from SCCM 2007.
    How can we clean the succesfully migrated? I cannot see which ones are succesfully migrated in SCCM 2007, the all show active (even the succesfully migrated ones).
    Pls advise.
    J.
    Jan Hoedt

    The client will become inactive if it's not requesting client policies, sending heartbeats, sending inventories, or sending status messages any more in a period of by default 7 days (but it all depends on the configured intervals). Also, if you
    delete clients that are still active, they will come back with the next heartbeat if they are still active.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Sccm 2012 migration and MDT

    In our current environment we have sccm 2007 and MDT 2013 separate to deploy workstation OS images. We have MDT just referencing SCCM package ID's (package path on the DP) to install applications during the build process.
    We are currently migrating to SCCM 2012 and because the DP folder structure has changed now - i.e. 'SCCMContentLib' can we still use MDT separately and reference the 'DataLib' directory in MDT or is the best option to fully integrate MDT in SCCM?

    Hi,
    The following two blog could help you to understand SCCMContentLib structure.
    An adventure in the sccmcontentlib - single instance store
    http://blogs.technet.com/b/hhoy/archive/2012/05/31/an-adventure-in-the-sccmcontentlib-single-instance-store.aspx
    Understanding the Configuration Manager Content Library
    http://blogs.technet.com/b/configmgrteam/archive/2013/10/29/understanding-the-configuration-manager-content-library.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCCM 2012 Migration

    Dear All
    Please share the documents for the SCCM 2007 to 2012 migration.
    Regards,
    Siva.V

    Hello There,
    Here a few TechNet articles and videos that may help you.
    Client Migration from Configuration Manager 2007 to Configuration Manager 2012
    http://blogs.technet.com/b/system_center_in_action/archive/2012/01/14/client-migration-blog.aspx
    SCCM 2012 Project Plan
    https://gallery.technet.microsoft.com/SCCM-2012-Plan-43da1861
    Make The Move: Migrate from SCCM 2007 to SCCM 2012
    http://channel9.msdn.com/Events/TechEd/Australia/Tech-Ed-Australia-2011/SEC305
    Migrating Hierarchies in System Center 2012 Configuration Manager
    http://technet.microsoft.com/en-us/library/gg682006.aspx
    Best Regards,
    Renato S. Pacheco

  • SCCM 2007 to SCCM 2012: migrate SOME items, TESTING ONLY(!)

    Hi,
    We have an SCCM 2007 environment in production with which we don't deploy any os-es. All other features: packages etc we do use, currently for Windows XP as well as Windows 7.
    We've setup a SCCM 2012 environment in which we will deploy Windows 7. I'm not familiar with the possible migration concepts, therefore I thought of setting all items on SCCM 2012 manually (collections, applications) but why reinvent the weel? Therefore
    I 'd like to know/test my options WITHOUT IMPACTING production (export, import? ...)
    Please advise howto.
    J.
    Jan Hoedt

    Hi,
    You can migrate the collections, advertisement to SCCM 2012 or create them manually. Both are OK. I suggest you read the migration document first.
    The Migration documents are in the link below.
    http://technet.microsoft.com/en-us/library/gg682006.aspx
    Juke Chou
    TechNet Community Support

  • SCCM 2012 Migration question

    My current environment status.
    1. old CM2012 host name is BACKOFFICE and all workstations/servers are using its CM Client
    2. Setup a new CM2012 host name SCCM and did the migration job successful.
    So my concerns are
    a. In SCCM in All Systems  device collection, under Client = No    which means it doesn't see the CM Client. And this is for all workstation & servers within domain that doesn't detect CM Client.   However in my old CM2012 
    BACKOFFICE it does have it as a yes.
    b. In SCCM I tried to right click a workstation and do Install Client and it didn't work. here is log from CCM.Log
    c) So my question is do I have to first uninstall the old CM client from BACKOFFICE off every single workstations/servers then process the push Install Client in new SCCM server ? what is the best practice ? Thanks for your help!!!

    Correct, the easiest way to reassign your clients to the new environment is by reinstalling the clients.
    The log file indeed indicate that the client already is installed. So, like, t.c.rich mentioned, select
    Always install the client software and you should be fine (to be absolutely sure you can even also select Uninstall existing client).
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • SCCM 2012 - Migrating SQL components to cluster including Reporting Services

     
    Current SCCM 2012 environment:
     - CAS with database on remote SQL (non-cluster) server in a named instance - SQLSRV\CASINST 
     - SQL Reporting Services in also installed in the SQLSRV\CASINST instance 
     - The SCCM Reporting Services Point role is installed on the SQLSRV\CASINST instance 
     - Primary server with database on the same remote SQL (non-cluster) server in a different named instance - SQLSRV\PRIINST 
    Now I would like to move all of the database stuff to an existing SQL 2008 R2 cluster (SQLCLUSTER) and decommission the SQLSRV server.  SQLCLUSTER already exists and the default instance is already in use (for other applications) for both database engine
    services and reporting services.
    From my understanding:
     - SQL 2008 R2 Reporting Services cannot be clustered
     - Best practise is to install Reporting Services Point on a remote site server rather than a CAS server
     - SSRS can be installed on nodes in SQL cluster as standalone installs - with the caviat that they don't use instance names already in use
    So I plan to:
     - Move CAS database to new named instance on cluster eg SQLCLUSTER\CASINST 
     - Move primary database to new named instance on cluster eg SQLCLUSTER\PRIINST 
     -  Install SQL Reporting Services on one of the cluster nodes (unclustered) using a named SSRS instance eg SQLCLUSTERNODE1\SCCMREPORTING
    -  This article points out some interesting results of not have a default instance -  http://magalhaesv.wordpress.com/2012/05/24/system-center-configuration-manager-x-sql-server-reporting-services-x-wmi-english-version/
     - Move Reporting Services Point from SQLSRV\CASINST to the cluster node eg SQLCLUSTERNODE1\SCCMREPORTING
    I have read on some forums (eg
    http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/40ad0cb4-a464-4576-b824-957ed6e1b2e2) things like '' If you have an app like SCCM that requires a default instance of SSRS, you are out of luck if your cluster already has a default
    instance of the database engine.", but I cannot find this anywhere in Microsoft documentation.  From the MS documentation (http://technet.microsoft.com/en-us/library/7fd0d4f5-14e0-4ec7-b2e6-3b67487df555#BKMK_InstallReportingServicesPoint)
    I understand that as long the current user has read access to WMI on the remote site server where SQL Reporting Services is installed, you should be able to use a named instance for SQL Reporting Services and successfully install the Reporting Services Point
    on it.
    So a 2 part question:
     - Anybody see any obvious flaws in my high level plan?
     - Anybody care to comment on the SCCM requiring a default instance of SSRS?
    My Microsoft Core Infrastructure & Systems Management blog -
    blog.danovich.com.au

    Yes, I know this is an old post, I’m trying to clean them up, Did you figure this out, if so how?
    http://www.enhansoft.com/
    Hi Garth,
    Yes we moved the DBs and RS as outlined above. As expected, we needed to have a default instance of RS because otherwise the SCCM console doesn't see the Reporting Services instance when you try to deploy the Reporting Services site role.
    So the above plan worked.
    My Microsoft Core Infrastructure & Systems Management blog -
    blog.danovich.com.au

  • SCCM - Client migration from 2007 to 2012

    Hi All,
    Can someone share the information what will be the impact in case , if we install CM2012 R2 client on the exisiting 2007 R2 client machine
    Regards,

    Hi,
    In addition, information from the source hierarchy about any advertisements or deployments that have not yet run, Compliance data and inventory are not retained.
    For more information, please check the article below.
    Planning a Client Migration Strategy in System Center 2012 Configuration Manager
    http://technet.microsoft.com/en-us/library/gg712283.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Software Distribution & Patching Design Issues - Migration of Packages SCCM 2007 to Application or Conventional Packages in SCCM 2012

    Hi All
    I am starting in discussion to deep root on Software Distribution & Patching model in large environments from SCCM 2007 migrating to SCCM 2012.
    Below are certain assertions i am putting forward for your expert views or you may in a similar situation
    1- I have migrated the packages from SCCM 2007 to SCCM 2012 as conventional methods, now i am deploying them [ not migrated the advertisements and collections ], so while deploying i am facing a peculiar situation that the deployment when created is of the
    name "<<Package name>>(program)". I am not able to rename the deployment for the conventional packages. is there a way out to that??
    2- Will the collection queries work the same in SCCM 2012 as was in SCCM 2007??
    3- In SCCM 2012 Primary site there is default role called Site System role in that there is tab for proxy settings. I have observed that if do not check the proxy tab there and punch in proxy IP and port then after some time in the WSUS server the update
    source and proxy server tab the proxy option gets unchecked and hence the sync in software update point status appears failed. Is that anyone else also has observed !!!!!
    Regards Sushain KApoor

    This is a duplicate of
    https://social.technet.microsoft.com/Forums/en-US/2ddb8170-529b-4652-830e-fd0ade384b98/software-distribution-patching?forum=configmanagermigration
    Please do not double post.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM 2007 to 2012 R2 Migration Data Gathering Error

     
    Hi guys ,
    I am working on SCCM 2007 to 2012 migration and stucked at data gathering process. Following
    error i am getting while gartering data process.I have made the erroe details bold to easily find.
    Migmcctrl.log is showing this error:
     [Worker]:                         Start syncing #MIG_Entity.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.957+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
                            Query against Legacy Site , @rowversion=00-00-00-00-00-0A-4C-E2, @collectionrowversion=00-00-A2-DD-00-20-26-14, @SourceSiteCode=ABC:            
          SELECT                    (CASE                      WHEN ISNULL(ext_cilp.DisplayName, ext_ci.CI_ID) IS NULL THEN NULL    
                     ELSE                           dbo.fnSCCMMultiByteToWideChar(                    
             CASE                                  WHEN (SELECT LocaleID FROM SMSData) IS NULL THEN (SELECT d.LocaleID FROM SMSData d)      
                               WHEN (SELECT LocaleID FROM SMSData) IN (-1, 0, 65535, 1024, 2048) THEN (SELECT d.LocaleID FROM SMSData d)                
                     ELSE (SELECT LocaleID FROM SMSData)                              END,              
                   CONVERT(VARBINARY(MAX), ISNULL(ext_cilp.DisplayName, ext_ci.CI_ID)))                  END)  as EntityName, CONVERT(NVARCHAR(256), ext_ci.CI_ID) as ObjectKey,
                              ext_ci.CIType_ID as ObjectTypeID, ext_ci.rowversion AS rowversion, ext_ci.ChangeAction as ChangeAction,                  
            ext_ci.CI_UniqueID as UniqueID                  FROM SCCM_Ext.vex_ConfigurationItems as ext_ci                   LEFT JOIN v_LocalizedCIProperties_SiteLoc
    as ext_cilp ON ext_ci.CI_ID=ext_cilp.CI_ID                   WHERE   (1 = 1 OR ISNULL(ext_ci.SourceSite, @SourceSiteCode) = @SourceSiteCode)  AND ext_ci.rowversion > @rowversion AND      
                       ISNULL(ext_ci.CIType_ID, 0)<>1 AND ISNULL(ext_ci.CIType_ID, 0)<>8                          AND ISNULL(ext_ci.CIType_ID,
    0)<>9~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.962+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
            End syncing object tables.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.964+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
    ========== End syncing objects metadata ==========~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.965+420><thread=5024 (0x13A0)>
                                                                    ERROR: [Worker]:      
      System.InvalidOperationException: ExecuteReader requires an open and available Connection. The connection's current state is closed.     at System.Data.SqlClient.SqlConnection.GetOpenConnection(String method)     at System.Data.SqlClient.SqlConnection.ValidateConnectionForExecute(String
    method, SqlCommand command)     at System.Data.SqlClient.SqlCommand.ValidateCommand(String method, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
    String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
    behavior, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader()     at Microsoft.ConfigurationManagement.MigrationManager.LegacyRepository.GetDataReader(String sqlQuery, Dictionary`2 parameters, Boolean ignoreLocalSite)
        at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<SyncObjectsInformation>d__25.MoveNext()     at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()
        at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.966+420><thread=5024 (0x13A0)>
    STATMSG: ID=8617 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS=SCCM2012R2.RAT.Com SITE=ASL PID=2804 TID=5024 GMTDATE=Wed Mar 19 09:11:07.966 2014 ISTR0="SCCM2012R2.RAT.Com (ASL)" ISTR1="" ISTR2=""
    ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.966+420><thread=5024 (0x13A0)>
                                                                    [Worker]: ==================== Sync
    Agent Job 16777235 Ended ====================~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.967+420><thread=5024 (0x13A0)>
    ERROR: [Worker]: System.InvalidOperationException: ExecuteReader requires an open and available Connection. The connection's current state is closed.     at System.Data.SqlClient.SqlConnection.GetOpenConnection(String method)  
      at System.Data.SqlClient.SqlConnection.ValidateConnectionForExecute(String method, SqlCommand command)     at System.Data.SqlClient.SqlCommand.ValidateCommand(String method, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
    cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)  
      at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader()     at Microsoft.ConfigurationManagement.MigrationManager.LegacyRepository.GetDataReader(String
    sqlQuery, Dictionary`2 parameters, Boolean ignoreLocalSite)     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<SyncObjectsInformation>d__25.MoveNext()     at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()
        at Microsoft.ConfigurationManagement.MigrationManager.ExtensionMethods.<AttachErrorHandler>d__6`1.MoveNext()     at Microsoft.ConfigurationManagement.MigrationManager.SyncAgentJob.<get_ExecutionPlan>d__7.MoveNext()  
      at Microsoft.ConfigurationManagement.MigrationManager.Job`1.ExecuteNext()~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.968+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Start processing status
    changed event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.975+420><thread=5024 (0x13A0)>
                                                                    [Worker]:        
    Set the schedule item 16777235 end time~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.976+420><thread=5024 (0x13A0)>
    [Worker]:         Set the schedule item 16777235 status to Failed~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.976+420><thread=5024 (0x13A0)>
                                                                    [Worker]: End processing status changed
    event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.982+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Disposing Job 16777235~~
     $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.984+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Removing Job 16777235 from
    job manager.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.984+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Removing the Job with Id
    16777235.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.985+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Disposing worker~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:11:07.985+420><thread=5024 (0x13A0)>
                                                                    [Worker]: Disposing current site
    connection~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.985+420><thread=5024 (0x13A0)>
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131509, 80131509~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.985+420><thread=5024 (0x13A0)>
    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131509, 80131509~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.986+420><thread=5024 (0x13A0)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.996+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.997+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:07.997+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.022+420><thread=4648 (0x1228)>
    [MigrationManager]:                 The item MIG_SiteMapping 16777235 is scheduled to run at 03/19/2014 13:10:06 UTC, 03/19/2014 18:40:06 Local Time, sleep for 03:58:58.2280000.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:11:08.039+420><thread=4648 (0x1228)>
    [MigrationManager]: End two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.039+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.040+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start two step scheduling for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.040+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.041+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 2. Query the first item in order of DateNextRun ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.064+420><thread=4648 (0x1228)>
    [MigrationManager]:                 No item found. Sleep until the next event.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.084+420><thread=4648 (0x1228)>
    [MigrationManager]: End two step scheduling for MIG_Job~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.084+420><thread=4648 (0x1228)>
    [MigMCtrl]: the workitem queue is full!~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.084+420><thread=4648 (0x1228)>
    [MigMCtrl]: NOTIFY job manager ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777235.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.085+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.086+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start processing schedule changed event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.086+420><thread=4648 (0x1228)>
    [MigrationManager]:         Update the DateNextRun of the schedule item MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.118+420><thread=4648 (0x1228)>
    [MigrationManager]:         Calculating the next run time ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.118+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This is a recurring schedule token.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.118+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This item already run at 03/19/2014 09:10:27 UTC, 03/19/2014 14:40:27 Local Time, the next run time is 03/19/2014 13:10:27 UTC, 03/19/2014 18:40:27 Local Time.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:11:08.119+420><thread=4648 (0x1228)>
    [MigrationManager]:         Check requested operation for schedule item MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.132+420><thread=4648 (0x1228)>
    [MigrationManager]: End processing schedule changed event for MIG_SiteMapping.ID=16777235~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.132+420><thread=4648 (0x1228)>
    [MigMCtrl]: EVENT raised ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777235.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.133+420><thread=4648 (0x1228)>
    [MigMCtrl]: 1 instruction file processed.~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.133+420><thread=4648 (0x1228)>
    [MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:11:08.133+420><thread=4648 (0x1228)>
    [MigMCtrl]: NOTIFY job manager ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.315+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.316+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start processing schedule changed event for MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.331+420><thread=4648 (0x1228)>
    [MigrationManager]:         Update the DateNextRun of the schedule item MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.350+420><thread=4648 (0x1228)>
    [MigrationManager]:         Calculating the next run time ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.350+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This is a recurring schedule token.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.350+420><thread=4648 (0x1228)>
    [MigrationManager]:                 This item hasn't run yet, we will run it immediately.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.351+420><thread=4648 (0x1228)>
    [MigrationManager]:         Check requested operation for schedule item MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.359+420><thread=4648 (0x1228)>
    [MigrationManager]:         Start operation requested, the scheduled item 16777236 will be started once computing resource is allocated.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.359+420><thread=4648 (0x1228)>
    [MigrationManager]: End processing schedule changed event for MIG_SiteMapping.ID=16777236~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.360+420><thread=4648 (0x1228)>
    [MigMCtrl]: EVENT raised ( 1, 0, C:\Program Files\Microsoft Configuration Manager\inboxes\mmctrl.box\16777236.SYN ).~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.360+420><thread=4648 (0x1228)>
    [MigMCtrl]: 1 instruction file processed.~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.361+420><thread=4648 (0x1228)>
    Connection string = Data Source=(local);Initial Catalog=CM_ASL;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.362+420><thread=4648
    (0x1228)>
    [MigrationManager]: Start two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.363+420><thread=4648 (0x1228)>
    [MigrationManager]:         Step 1. Query the schedule items that was running or requested to start immediately ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.363+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Clear the requested operation.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.386+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Calculating the next run time ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.387+420><thread=4648 (0x1228)>
    [MigrationManager]:                         This is a recurring schedule token.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.387+420><thread=4648 (0x1228)>
    [MigrationManager]:                         This item already run at 03/19/2014 09:21:36 UTC, 03/19/2014 14:51:36 Local Time, the next run time is 03/19/2014 13:21:36 UTC, 03/19/2014 18:51:36 Local
    Time.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.387+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Set the next run time to 03/19/2014 13:21:36 UTC, 03/19/2014 18:51:36 LocalTime.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.388+420><thread=4648 (0x1228)>
    [MigrationManager]:                 Got an scheduled item 16777236. Set the sleep time to 0.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.411+420><thread=4648 (0x1228)>
    [MigrationManager]: End two step scheduling for MIG_SiteMapping~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:36.412+420><thread=4648 (0x1228)>
    [MigrationManager]: Impersonation is about to start ...~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:49.554+420><thread=4648 (0x1228)>
    [MigrationManager]: Impersonation succeed, current user identity is: rat\cmmig~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:49.555+420><thread=4648 (0x1228)>
    Connection string = Data Source=SCCM;Initial Catalog=SMS_ABC;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=True;Application Name="Migration Manager".~~  $$<SMS_MIGRATION_MANAGER><03-19-2014
    02:21:49.555+420><thread=4648 (0x1228)>
    [MigrationManager]: Impersonation is reverted.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:49.683+420><thread=4648 (0x1228)>
    [MigrationManager]: Detected source collation SQL_Latin1_General_CP1_CI_AS~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.841+420><thread=4648 (0x1228)>
    [MigrationManager]: Detected destination collation SQL_Latin1_General_CP1_CI_AS~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.842+420><thread=4648 (0x1228)>
    STATMSG: ID=8600 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_MIGRATION_MANAGER" SYS=SCCM2012R2.RAT.Com SITE=ASL PID=2804 TID=4648 GMTDATE=Wed Mar 19 09:21:57.843 2014 ISTR0="SCCM2012R2.RAT.Com (ASL)" ISTR1="SCCM.RAT.COM"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.853+420><thread=4648 (0x1228)>
    [MigrationManager]: Job 16777236 added.~~  $$<SMS_MIGRATION_MANAGER><03-19-2014 02:21:57.854+420><thread=4648 (0x1228)>
    I am not getting any solution  of this please help.

    ERROR: [MigMCtrl]: FAILED to EXECUTE job. error = Unknown error 0x80131509
    I previously had a similar issue. See blog post here
    http://gerryhampsoncm.blogspot.ie/2013/07/configmgr-sccm-2012-migration-sharing.html
    In my case one of the boundaries in the 2007 site had an empty Display column and this, it seems, is not allowed.
    Have you checked the box to "Enable DP sharing" while you create the Source Hierarchy? If so, try the process with the box unchecked.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • SCCM Migration Completed, cleanup work to do?

    I have finished migrating from SCCM 2007 to SCCM 2012. I have been asked by my colleagues to make sure I remove SCCM 2007 from our enterprise as cleanly as possible. I know that the "schema extensions" that are used by SCCM 2007 are shared with
    SCCM 2012, so I don't need to look there to do any clean up.
    What I don't know and can't seem to find is a guide or documentation on deprovisioning SCCM 2007 from the domain cleanly. I am sure there some ADSI edits that I will need to do somewhere.
     Any ideas?
    Portland Public Schools / Systems Administrator II

    See here.
    http://gerryhampsoncm.blogspot.ie/2013/08/configmgr-2012-sccm-2012-migration-post.html
    These steps have always worked for me.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson
    Thanks! That was exactly what I needed!!!!
    Portland Public Schools / Systems Administrator II

  • SCCM 2012 DP Migration

    Hi Team,
    I have 2007 secondary site installed DP and all the package are available.
    Q.
    1.What are the folders are using at the time of sccm 2012 migration.
    2.I seen SMSDPpro.log in DP share and found it importing package.. where it getting package from (don't have PCK file in the local server)? 
    3. After all the successful of import the very next day i saw in console it showing 65 success and 120 in progress.
    When I count the SMSDPProv.log more 150 packages are imported successfully. Why my console giving wrong info.
    Thanks

    Hi ,
    1.What are the folders are using at the time of sccm 2012 migration.
    Sorry that I didn't get the point of this question. Do you mean which folder are used on sccm 2012 to copy the content of SCCM 2007 DP packages?
    2.I seen SMSDPpro.log in DP share and found it importing package.. where it getting package from (don't have PCK file in the local server)?
    The package content is SCCM 2007 flowchart is:
    1. When you add a package to a standard Distribution Point, the distmgr component is notified with the packageID.PKN in inboxes\distmgr.box.
    2. The distmgr component begins the processing of the package
    3. Distmgr establishes a connection to the DP and checks for the SMSPKGdriveletter$ share.
    4. It creates a subdirectory with the package ID in the SMSPKGC$ share.
    5. Distmgr connects to the packageID folder it created and checks if the drive has the enough free space to copy the package contents:
    6. Distmgr sets the security on the
    \SMSPKGC$\<PkgID">\\<DP>\SMSPKGC$\<PkgID> folder and copies the package contents to that folder from the package source. It also copies the signature file (TAR file) to the SMSSIG$ share and sets the security on that folder:
    7. Distmgr runs the SQL query to update the status in the pkgstatus table in SQL.
    For more information, please see:
    The end to end flow of distributing a ConfigMgr 2007 package to a standard DP and a Branch DP in a single site environment
    http://blogs.technet.com/b/hhoy/archive/2012/05/31/an-adventure-in-the-sccmcontentlib-single-instance-store.aspx
    In SCCM 2012 or later, by default, the content is single storage and browsing to a DP does not store all the files in a package id folder where you could find an install and execute it.
    For more information, please refer to:
    An adventure in the sccmcontentlib - single instance store
    http://blogs.technet.com/b/hhoy/archive/2012/05/31/an-adventure-in-the-sccmcontentlib-single-instance-store.aspx
    3. After all the successful of import the very next day i saw in console it showing 65 success and 120 in progress.
    Refresh the status and close the SCCM console, reopen and see if this helps. If you are using SCCM 2012 Sp1, check this KB
    http://support.microsoft.com/kb/2828900. Also check if this technet links helps:
    https://social.technet.microsoft.com/Forums/en-US/71b90f35-69de-495c-8f8a-de85ad66b593/sccm-2012-sp1-configuration-manager-client-package-in-progress?forum=configmanagerdeployment
    Thanks.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for