SCCM Installation Ironport Plugin for Outlook - CustomConfig files

I'm attempting to install the Ironport Plugin via SCCM. Our client is version 7.2.0.039. Pretty standard executable install, however, I need to use the UseCustomConfigs switch to set configurations in the client when it reaches our 2500 machines. My issue is with the syntax of the UseCustomConfigs switch. I am running the CiscoEmailSecurity-7-2-0-039.exe from a local folder on our SCCM server, not via UNC. I have the executable, the setup.iss, and the 2 config files that I need in that working directory. Below is the syntax I've tried. SCCM attempts to retry the install, but of course it fails......
CiscoEmailSecurity-7-2-0-039.exe /s /v"UseCustomConfigs=" /qn /f1 "setup.iss"
I guess my hangup is what do I put after the "=" if I'm running it from the directory that the executable is running from.....

Yes and no.....I did get the install to roll out via SCCM. It does install, but it fails more than half of the time. I'm then forced to use the Right Click Toolkit to rerun the advertisement on the machines that it "failed" on, and then it installs. I always end up with error code -3. In some cases it has failed because the user had Outlook open, but in other cases, it fails and I've got no real clue as to why......

Similar Messages

IronPort PlugIn for Outlook .enc files?

We have started to roll out the IronPort plugin for Outlook for both Encryption and SPAM reporting. On the SPAM reporting side I do see the e-mails that are getting reported but the e-mails are formatted differently.   I am guessing that the original e-mail being reported is now in the .enc attachment? Is there any way that I can view these so that I can see what kind of e-mail is being reported by my users? In the past I would check in on this from time to time and see if there were any mass e-mails that were getting through that I needed to create a custom filter for, now with these .enc files I'm not sure I can do that anymore.
I'll post one of the .enc files here in a bit.
Jason

So I can confirm that the new 7.4 Outlook plugin, feature does work to submit spam/phish/virus as plaintext. Basically you just need to set (ignore the attachment name option):
<report>
        <format>plain</format>
        <subject>Cisco Email Security Plug-in Report (${reportType})</subject>
</report>
Also for those upgrading to 7.4, be sure to manually upgrade yourself first, and set all your configurations using the BCE_config file first. Then follow the admin document for deploying the config file mass. The 7.3 and older config files will not work with the new plugin.
This configuration is only recommended if you will be checking report submissions or using some form of Phishing education solution and want to exclude these e-mails from actual submission. Here is a good outline how I implemented it. If anyone is interested I can probably do a quick video demonstration while it's all fresh in my mind and post it here.
1. Create one or more Quarantines (either on your central SMA or individual ESA/Ironport):
Example: Reported_TestPhish (delete after a period of time), Reported_Spam, Reported_Phish, Reported_Virus, Reported_Ham, Microsoft_Junk
2. create a Outgoing Mail filter that matches a header in your Test Emails so you can capturing them.
Example Match Content in Attachment: X-TEST(replace with your header) and if you use the Microsoft Report Junk Plugin, you should also use the condition to match the same text inside the mail body. Then point the action to Quarantine to your Report_TestPhish where after a period of time it will be deleted. I choose to use Quarantines rather then sending e-mails via notifications, but you could do this as well, for example if your Email Education provider can use the e-mail to track which employees reported the test e-mails for you.
3. Create individual Outgoing filters using the recipient email address to dump it into the right Quarantine. This will allow you to to not only Quarantine and view the messages, but also will add to your reporting. You can choose to use fewer Quarantines and filters to bundle together to fit your requirements.
4. Rather then adding these filters to your default policy, I suggest creating a new Outgoing Mail Policy called Report_Email (using the recipient email addresses). I then disable some of the policies such as DLP, A/V, and so on as needed and only apply the new filters we just created.
Hope this was useful for someone out there.

Configuring Cisco/IronPort plugin for Outlook with CRES

With the discontinuation of the IronPort IEA appliances we are getting ready to move from our on-premise IEA appliances to CRES. I have a demo key for Encryption that I am running on my C660s and I have an Outlook client configured with the Email Security Plug-In version 7.2.0.39. Currently the Outlook Plug in is configured to point to our on premise IEA appliances for the Server URL attribute in Desktop Encryption Options and is working great.
My question is, what do I use to connect it to CRES for desktop encryption?
The Admin guide "Cisco IronPort Email Security Plug-in 7.2 Administrator Guide" page 4-46 just says "Server URL Enter the URL for your Encryption server."
Thanks

Hi Jason,
Thanks for your question. The short answer is https://res.cisco.com:443 HOWEVER please note the following two points. First, you will need a CRES account, so that you can download a token to use with the plugin, to authenticate to CRES; you cannot use the default token which you have probably been using with your IEA. Second, using the current Outlook plug-in version 7.2 with CRES is not supported; it works, but it is not supported. There are plans to release a supported version.

Need some help understanding plugin for Outlook

Testing out the 7.3 plugin for Outlook. I am not clear on how the flagging of spam/not spam etc. works. We have local IronPort devices. We are not cloud based. When a user flags a message as spam in the Inbox, the Admin Guide says Cisco updates the anti-spam filters so the user will not receive emails like this in the future. Not clear how this works. I understand the email is getting submitted to Cisco for analysis but how do they update spam filters for just that one user? I can understand if we were using a cloud device but as I said we have local hardware. Need to understand this process and the Admin Guide falls short of explaining it.

Reporting spam/phish from Outlook via the plug-in only does that. It is packaging up the message and sending the message example off to our @access.ironport.com address for submission from that end-user. The plug-in itself is not actually doing any work to update the anti-spam on your appliance. These submissions are a work by themselves that is submitted and then reviewed from the rules writing process. In time, these submissions are scored, updated, and then written into the current IPAS (IronPort Anti-Spam) rules sets that are published back out to the ESA(s) themselves. So - as long as your ESA is set to get updates (by default, each 5 minutes), then you will get the updated rules --- and these rules are for everyone globally.
Hope that helps! If not - let me know.
-Robert

Installer "RightFax Form for Outlook"

Dear,
I am doing the configuration of the "Cisco Fax Server Version 9.4". I've done the downlad the installers of Cisco's website (because the CD was lost), install and configure the modules and the CUCM (7.1.5.31900-3), but do not know where to find the installer "RightFax Form for Outlook", which contains "RightFax client installation".
I did not find this application on the Internet or Cisco.
So how could I get this installer?
Thanks for the help.
Patrick
ps: I'm using Outlook 2007

Hello Pouyan,
You can develop an add-in for employee with an Outlook form region. There is no need to publish a customized form. You can store values in user defined fields which you may parse on the manager's side later. See
Creating Outlook Form Regions in MSDN for more information.
Then you can develop a VBA macro or an add-in for the manager to collect the data from the incoming emails. You can customize the Explorer window adding a window like you did with inspectors to display the information. But in that case there is no trivial
way to get the job done. You need to use Windows API functions. See
Adjacent Windows In Outlook and
Creating Adjacent Windows In Outlook sample project. I have also found the
Additional custom panel in Microsoft Outlook article for you. As an alternative you may consider using third-party tools like Add-in Express. It allows to add custom forms to the Explorer windows in Outlook.
The second way is to show a web page for the folder where you can display the data you need. See
How to programmatically create an Outlook home folder page in the Outlook Today style .
The third way is to use Solutions Module to get the data displayed. See
Programming the Outlook 2010 Solutions Module for more information.
Finally, it can be a single add-in installer or two separate add-ins (for managers and clients).

What is the best software/plugin for converting Quark files to Indesign?

What is the best software/plugin for converting Quark files to Indesign?
I don't want to upgrade to the latest Quark now i've got CC so going to make the leap to indesign only. Does Indesign auto convert or do I need anything else?

ID does not load QXD files. There is a respective commercial third-party plug-in to that effect, but it's rather pricey and I'm not up to speed which versions of Quark and ID it supports and which features come over. Inquire in the ID forum.
Mylenium

Spotlight Plugin for Outlook 2011 available?

Hello,
does anyone know if there is a Spotlight Plugin for Outlook 2011? Now I can't preview the messages if they come up in a search. Google, the Apple and the Microsoft website do not seem to contain any information on this.
Kind Regards,
Edwin

This plug-in is fine, but it works only if Outlook is running.
I have both Mac Mail and Outllook 2011 installed on my MacBook and I was going crazy because Spotlight shows by default the Outllook mails in the result list - and they can't be properly previewed.
To disable Outllook mails in Spotlight results, just add the "Microsoft User Data" folder (which lies in your Documents folder) to Spotlight's "Privacy" section.
Spotlight will now show mails as Mac Mail in the result list an you'll be able to preview them.
Of course your Exchange account(s) need to be proprerly set up in Mac Mail.
Hope that helps.

Voicemail plugin for outlook

Hello:
Any info about developing a voicemail plugin for outlook using JMF? Or any such stuff already available?
I have to provide my users a voicemail recording/sending option in their outlook clients. Similarly they should be able to listen to received voicemails using a control or something like that in their outlook interface.
On the other hand, I also need to provide to my users coming through my webmail interface with this option of sending/listening voicemails.
Please suggest how can JMF be useful to develop/integrate these features.
Thanks
candidcarper

Hello:
Any info about developing a voicemail plugin for outlook using JMF? Or any such stuff already available?
I have to provide my users a voicemail recording/sending option in their outlook clients. Similarly they should be able to listen to received voicemails using a control or something like that in their outlook interface.
On the other hand, I also need to provide to my users coming through my webmail interface with this option of sending/listening voicemails.
Please suggest how can JMF be useful to develop/integrate these features.
Thanks
candidcarper

Plugin for WMF type files

Hello:
Does anyone know if there are plugins for the vector type WMF files that can make it possible to load these in PE4? Other raster graphics applications are able to load wmf files. Why not PE4?
WinXP
Tony

Googling, I found this...
http://www.ronaldkeller.be/wmfforma.zip
Download and extract the file (double click on it): WMFFORMA.8bi
Then, copy the file there :
C:\Program Files\Adobe\Photoshop Elements 2\Plug-Ins\File Formats

Plugins for viewing other file types?

Hi. I'm just wondering if anyone knows of a plugin for Bridge that would allow me to preview other file types, specifically Blender 3D .blend files.
Windows Explorer can preview them, but not Bridge. And Bridge can preview all of the AI and PSD files that Windows Explorer can't.
I'd like to use bridge since it is faster for previewing and changing meta data, etc.
Any help is appreciated.
Thanks!

I'd like to use bridge since it is faster for previewing and changing meta data, etc
If the files don't show in the content window they probably are not supported. First try a purge cache for folder using the tool menu / cache/ purge cache for folder and if still no luck check the file type associations in the Bridge preferences.
If your file is not on the list the only option is to add a feature request somewhere on this forum. The more people want it the bigger chance it will get realized sometime.
I'm not aware of any plug in to add file types to Bridge. Don't think scripts can solve this but you could also visit the scripting forum for this.

IronPort SPAM plugin for Outlook 2003-2007

We are looking at rolling this out and just wondering if anyone can tell me how this plug-in works. We have a content filter that copies any mail to [email protected] to a mailbox that we look at to evaluate the amount of SPAM that our staff is reporting. Looks like when we use the plugin to report SPAM the content filter is not working. Any advice?

The spam plugin sends the email directly to https://ipas-complaints.ironport.com so you won't see it as an email going through the normal process.

Adobe plugin for Outlook in 2013 unable to configure to load at startup

Windows 7 Pro, Office 2013 Home and Business
I don't see a registry key for the plugin, there's no properties in Outlook for the plugin
Manually loads properly and functions properly, however unable to configure it to load when Outlook starts.
Any ideas?

Hi jeremyh77032804,
Please open Outlook and go to 'Tools > Options > Add-Ins' and select 'COM Add-ins' option under Manage label and click Go.
From the new dialog box that appears, select Acrobat PDFMaker Office COM Addin and click OK.
Also, please confirm the location of PDFMaker add-in is under "C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\Mail\Outlook"
Do you have the administrative privileges to this location specified above?
Please let me know.
Regards,
Anubha

I need a camera raw plugin for sony raw files

Hello there, I got a new Sony A99 camera and I need a Camera Raw update for Adobe Bridge CS5. I can see my old Sony files from my A580 but the new once are not showing up. Where can I get an update for my CS5 bridge software?
Thanks
Fred

Which operating system are you using?
Have you tried Help>Updates from within photoshop cs6 to get either camera raw 8.3 or 8.7.1, which should enable photoshop cs6 to open the canon 5D Mark III files.
(version of camera raw depends on your operating system)
If that doesn't work try one of the following camera raw plugin installers:
Camera raw 8.7.1 plugin
https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
If you have windows xp or vista or mac os x snow leopard (10.6.8), then you'll have to use the camera raw 8.3 plugin installer:
https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

Anyone know of a Lion-compatible Quicklook plugin for Illustrator CS5 files?

The Lion update seems to have hosed the plugin I had, which worked OK under 10.6. Thanks!

Thanks for this suggestion. I have tried SneakPeek Pro without success. The installer ran, created a plugin and a preference pane, but invoking QuickLook for Illustrator files still showed me just the file icon.
I have also tried the Adoview plugin. Same result.
I can't find good information on troubleshooting either of these plugins; this seems to be a pretty underdeveloped area. That's a surprise.
Any further suggestions (troubleshooting these plugins, hacks, other plugins) are more than welcome. Thanks!

Acrobat XI plugin for Outlook 2013 crashes constantly; has to be re-enabled

I have a user that has Windows 7 (32 bit) and Oultook 2013 (also 32 bit). The export to PDF plugin did not work with Acrobat X so we upgraded to Acrobat XI, however this plugin crashes and "disappears" quite often, requiring the user to open the settings and re-enabling the plugin. This will also occasionally cause Outlook to crash. Any suggestions on how to resolve this or at least further troubleshoot?

There is a known problem with Acrobat and the Outlook plug-in for PDF export, both with 32-bit and 64-bit Office. Simply stated, as you convert more e-mails, especially HTML-based e-mails laden with images, a memory leak causes Acrobat to run out of memory.
If you are experiencing this particular problem, the “fix” is to monitor (via the Windows Task Manager), a process with a name beginning with HTML2PDFWrap. If its “Memory (Private Working Set) begins to approach 1,500,000 K in size, at any time in which you are not doing a conversion of one or more Outlook messages to PDF, right click on that process in the Windows Task Manager and select “End Process.” The next time you need to convert an Outlook message to PDF, Acrobat will automatically restart that process.
(Note that a bug has been filed with Acrobat Engineering and we are awaiting a fix to the particular issue described above.)
- Dov

SCCM Installation Ironport Plugin for Outlook - CustomConfig files

Similar Messages

Maybe you are looking for