SCCM MAC management server and internet Client management server in on system
dear all
we have an internet based management system (IBCM server ) sccm 2012 sp1 ,can we make the same servers as MAC management server ,is there any challenge in this ,because as per TechNet mac mangemetn server works in internet mode
even though in intranet ,also there is no documentation when mac clients are in internet
ankith
hi Torensten
we need enrolment point and enrolment proxy point can we do install in same server
I have doubt enrolment proxy point works on 443 will that confilit with IBCM external MP which also in 443
ankith
Similar Messages
-
SCCM design DMZ for intranet and internet clients
Hello,
I am looking for some design recommendations for my test environment that I would like to apply to one production environment (I already posted about this topic but I still have some questions).
I am working with 2 domains (2 forests) with no trust relationships.
Domain A : internal
Domain B : DMZ
From a firewall point of view, only the ports from the internal to the DMZ will be opened.
From the internet to the DMZ, only HTTPS will be opened.
Currently, I only manage the clients connected to the internal domain.
I would like to deploy a new management point in DMZ that will allow me to manage my DMZ clients (servers) and my Internet clients (laptops).
Should I use 2 management points ? Is it supported ?
- one for the DMZ clients
- one dedicated to my internet clients
If I use only one MP, should I allow Intranet and Internet clients ?
Should I allow my DMZ clients to communicate with the internal management point (port 80) and only use the MP in DMZ for my Internet clients.
The only documents I can find on Technet require too many ports to be opened in the firewall (From DMZ to Internal) and can't be applied to my environment.
Thanks.Have a look at the following blog which explains your queries comprehensively.
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
-RG -
Can't uninstall Premier Pro. I keep getting messages to quit the Adobe QT32 Server and the dynamiclink manager. I have no idea how to do these tasks?
You can kill these 2 task by opening the Windows Task manager (CTRL+ALT+SUPPR)
Then find the processes named :
Adobe QT32 Server
Adobe Dynamic Link Manager
Kill theses 2 tasks (right click then END OF TASK)
If you got many of theses tasks, kill each.
Then uninstall Premiere. It should be OK
good luck
noar -
I came across a concept stun server and stun client....is it possible to use these things in video conferencing in internet.pLease help.....for implemenation and materials,code also
Hi this is Ramesh iam developing an desktop video conferencing application.
when i use RTP it is working good in Lan but not in internet.
so that now planed to use JStun and i have source also while running iam getting this exception
D:\project\jstun\src>
java de.javawi.jstun.test.demo.StunServer 42050 121.246.235.202
42058 121.246.235.202
java.net.BindException: Cannot assign requested address: Cannot bind
at java.net.PlainDatagramSocketImpl.bind0(Native Method)
at java.net.PlainDatagramSocketImpl.bind(Unknown Source)
at java.net.DatagramSocket.bind(Unknown Source)
at java.net.DatagramSocket.<init>(Unknown Source)
at java.net.DatagramSocket.<init>(Unknown Source)
at de.javawi.jstun.test.demo.StunServer.<init>(StunServer.java:44)
at de.javawi.jstun.test.demo.StunServer.main(StunServer.java:241)
121.246.235.202 is my server ip address.which ip i need to use and which port i need to use.
please give me a brief idea how i can run this.
if u have any code which is running on internet for video transmission please send me.
i hope u will help me.
my mail id :[email protected] -
Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together
Hi.
Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
for more information.
Loader Exceptions:
Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
+ Import-Module <<<< (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
+ CategoryInfo : ResourceUnavailable: (:) [Import-Module], PSSnapInException
+ FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
If first loaded DPM 2012 module::
Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
types. Retrieve the LoaderExceptions property for more information.
Loader Exceptions:
Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
an implementation.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
+ Import-Module <<<< 'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
ualmachinemanager\virtualmachinemanager.psd1';
+ CategoryInfo : ResourceUnavailable: (:) [Import-Module], PSSnapInException
+ FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommandVote if you have same problem:
https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together -
Bluetooth communication between J2SE server and J2ME client
Hi everyone!
I'm new here in this forum...
I try to make a small project to my studies,
My project will include J2SE server and J2ME client.
I'm stuck in the step of finding the server with the wireless toolkit emulator.
I found this issue in old subject: here
I try the solution in reply 6 but I don't understand exactly who to define kvem.home, and I got this error:
" You must define the system property "kvem.home" "
maybe someone can help me and explain how to do that?
thanks!Hello,
I want to find out how this can be done, too. I tried with
System.setProperty("kvem.home", "C:\\WTK2.5.2");but I get an error:
java.lang.UnsatisfiedLinkError: com.sun.kvem.jsr082.impl.bluetooth.BluetoothController.setSystemProperty(Ljava/lang/String;Ljava/lang/String;)I included these files in the build path:
c:\WTK2.5.2\wtklib\gcf-op.jar
c:\WTK2.5.2\wtklib\kenv.zip
c:\WTK2.5.2\wtklib\kvem.jar
and I import com.sun.kvem.bluetooth.*;
I'd appreciate any help. -
Machine server and machine client
Hello,
i need to create a communication between two machines solaris 2 installed in VM workstation; to begin with NFS and do these :
Machine A : share -F nfs /opt
and in Machine B : mount -F nfs machineA:/opt /mnt
also
share -F nfs -o rw=machineB /opt
and in B
mount -F nfs machineA:/opt /mnt
MY need its just about networking between two machines installed in my VM and create a server and a client machine!
@IP machine A :192.168.1.2
@IP machine B :192.168.1.3
may i create an unique domain?
pleaz show me step by step, im still a beginner with solaris 10 administration part 2.
Thank you,
HerbichAccording to certification matrix (metalink) 32bit clients (9.2 and higher) are supported on 64bit servers. Of course in their own ORACLE_HOME.
Werner -
Strange problem with AIX server and windows clients
I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If I start
another client the second client is horribly slow (2 sec vs 16 sec). Even if
I kill the first client the second client continues to be slow. If I have 2
clients open together, the first one continues giving 2 sec response while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent response from
the server. Irrespective of how many client I have on the NT machine, I keep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2K server,
and the clients "behave" normally i.e I get consistent repsponse time (it
may be slow or fast, but it is consistent and is consistent b/w NT and W2K).
We even tried putting my laptop on the same network as the AIX server, but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]..
Sounds like a reverse DNS lookup or similar network timeout.Thanks for the suggestion, but then why would the first client on w2k or XP
get a better performance and the subsequent clients get worse performance?
>
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"vinay moharil" <[email protected]> wrote in message
news:[email protected]..
I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If Istart
another client the second client is horribly slow (2 sec vs 16 sec).
Even
if
I kill the first client the second client continues to be slow. If I
have
2
clients open together, the first one continues giving 2 sec response
while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent responsefrom
the server. Irrespective of how many client I have on the NT machine, Ikeep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor
memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2Kserver,
and the clients "behave" normally i.e I get consistent repsponse time(it
may be slow or fast, but it is consistent and is consistent b/w NT andW2K).
We even tried putting my laptop on the same network as the AIX server,
but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!! -
When trying to log-in into my Admin Console:
A required MBean Server is disabled which prevents the proper operation of
the Weblogic Administration Console.
Please enable the DomainRuntimeMBean Server and the Edit MBean Server in
this domain's configuration.
I can't even log-in to the Console, how can I change the domain's
configuration?
Thanks in advance!
Two errors logged to the console:
Console encountered the following error java.rmi.ServerError: A error
occurred the server; nested exception is:
javax.xml.transform.TransformerFactoryConfigurationError: Provider
org.apache.xalan.processor.TransformerFactoryImpl not found
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:220)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
at
weblogic.management.remote.iiop.IIOPServerImpl_922_WLStub.newClient(Unknown
Source)
at
javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2239)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:271)
at
javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at
com.bea.console.utils.MBeanUtils.lookupMBeanServerConnection(MBeanUtils.java:2907)
at
com.bea.console.utils.MBeanUtils.getDomainRuntimeMBeanServerConnection(MBeanUtils.java:1594)
at
com.bea.console.utils.MBeanUtils.getDomainRuntimeServiceMBean(MBeanUtils.java:1670)
at
com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:156)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
at
org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:554)
at
org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:851)
at
org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:630)
at
org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:157)
at
com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:241)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at
com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:130)
at
org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1169)
at
com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:688)
at
com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:268)
at
com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at
com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:288)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:427)
at
com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:708)
Console encountered the following error
com.bea.console.exceptions.NoJMXServerException:
Domain Runtime MBean Server is not enabled. You will need to enable it
through the JMXMBean.
at
com.bea.console.utils.MBeanUtils.getDomainRuntimeServiceMBean(MBeanUtils.java:1677)
at
com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:156)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
at
org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:554)
at
org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:851)
at
org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:630)
at
org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:157)
at
com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:241)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at
com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:130)
at
org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1169)
at
com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:688)
at
com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:268)
at
com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at
com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:288)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:427)
at
com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:708)
...Nevermind this, found it myself:
Some jar files the deployed & running application used, were needed in
directory \bea\jdk150_10\jre\lib\ext -
I'm looking for a solution where I don't change our current AD groups, (avoid using a local group and a field group), also trying to avoid using a server in a DMZ to handle field people (will need to buy a new server).
At the end i'm looking to use a replica server to push updates from the internet to the field group (or OU with a GPO pointing to such replica server) and use the local server to host the updates locally and push to the office people.
Probably this is the question that needs to be answered, can an OU group have 2 different GPO's pointing to 2 different WSUS servers (local and replica) (local updates vs updates from internet) and if an user of such group is in the office they get updates
from the local server and if he is in the field get the updates from the replica server? I know GPO's can have precedence set to the OU, but do they work like a trigger or something that tells them to go to the next GPO.
Thanks in advancecan an OU group have 2 different GPO's pointing to 2 different WSUS servers (local and replica) (local updates vs updates from internet)
No.
and if an user of such group is in the office they get updates from the local server and if he is in the field get the updates from the replica server?
There are two ways to achieve this. Typically we talk about this scenario when the mobile systems are going to use AU/WU to get Security Updates. Taking advantage of the fact that GROUP policy cannot refresh on a machine which is not "in the office", you
define a Registry Script to run in the user's STARTUP folder, which will set the registry values to configure that client to use the alternate source.
But, in the case where you have an Internet-facing WSUS server in the DMZ, and a Corporate-facing WSUS server on the LAN, you use the SAME URL, but use DNS to direct the client to the correct IP Address. When the client is on the LAN, the LAN DNS gives the
IP Address of the Corporate server; when the client is on the Internet, the Internet DNS gives the IP Address of the DMZ server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Applet works in Windows Server and not in Unix server
My friends,
I have a signed applet working fine in a windows server and a client with win98. When a put this applet in a AIX/Unix server in same win98 client did not work.
The applet call a program in the client by Runtime.exec and a give "error=0".
Someone can help me ?Show the code with the runtimeexec line.
Windows file system is different than UNix.
Windows eg. Runtime.exec (c:/fileToRun.exe)
*ix eg. Runtime.exec (fileToRun) -
I'm tryingt to set up my email through my school account and i'm not sure what it means when i'm asked to enter a incoming mail server and an outgoing mail server. Help would be appreciated thanks
Since no one here has any idea about what type of mail your school offers...you don't mention what school...your question, as asked, can't be answered. What don't you contact your school's IT dept., or look online. Most schools have instructions on how to do so online.
-
High availability for Lync 2013 persistent chat server and office web app server
I have 1500 users, need HA in primary data center and DR also. looking for HA and DR solution for persistent chat server and office web app server.
is below correct?
1. 2 persistent chat server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
2. 2 Office web app server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
also do i need HLB for both roles?1) In Lync Server 2013, there are improvements in both high availability and disaster recovery:
High availability improvements: SQL Server mirroring is used to provide high availability for the Persistent Chat Server content database and Persistent Chat compliance database within a data center (in-site).
Disaster recovery improvements: Persistent Chat Server supports a stretched pool architecture that enables a single Persistent Chat Server pool to be stretched across two sites (that is, a single logical pool in the topology, with servers in the pool physically
located across two sites). SQL Server Log Shipping is used for cross-site disaster recovery.
For more information about high availability and disaster recovery, see
Configuring Persistent Chat Server for High Availability and Disaster Recovery in the Deployment documentation.
2) for HA & DR, you can 2 Office web app server in a pool of primary data center and 1 in DR. and You will need HLB for office web app servers
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Managing stream between java server and c client
Hi all
I'm working on a client/server application.
Client have been written in C
Server is in Java.
The client connect to the server, send a message (unknown size) and wait a response from the server.
The server on connection start a new thread. This thread try to read data from the socket, using a BufferedInputStream :
BufferedInputStream in = new BufferedInputStream(socket.getInputStream());
As far as I dont know the size of the incoming message, i use the folowing algorythme to read data :
byte[] bytesLus = new byte[1000];
byte[] tmpBytesLus;
byte[] tousLesBytes;int nb;
i = 0;
tousLesBytes = new byte[0];
Log.trace(sourceTag,"Lecture des premiers octets");
nb=in.read(bytesLus,0,bytesLus.length);
Log.trace(sourceTag,nb+"octets lus");
while (nb>0){
tmpBytesLus = new byte[i+nb];
System.arraycopy(tousLesBytes,0,tmpBytesLus,0,tousLesBytes.length);
System.arraycopy(bytesLus,0,tmpBytesLus,tousLesBytes.length,nb);
tousLesBytes = tmpBytesLus;
i = i+nb;
bytesLus = new byte[1000];
Log.trace(sourceTag,"nb octets lus : " + i);
if (in.available()>0)
nb=in.read(bytesLus,0,bytesLus.length);
else
nb=0;
This seemed (but only seemed - i will explain it later) to work fine :
the client send a 6300 bytes sized msg. Server receive it, treat it and send response back. and this at each try.
But when i change the log level of the server from TRACE to ERROR (wich have on consequence to accelerate the instruction Log.trace( ... ) the server doesn't work so fine !
On first try, everything is ok, but on second, client send the same 6300 bytes msg, but server consider receiving only 3000 !
After debbuging, i found why :
the reason is the use of :
if (in.available()>0)
If you are reading faster than the writer, there is a moment where the stream is in a blocking state for the reader. and in.available return the number of bytes you can read before blocking...
So my server consider that it reached the end of the message....
So, after this long introduction, here my question :
What is the best way to detect the end of a stream ?
Should I send a special character on the stream and decode it on server ?
Thank's for your advice.
OlivierGenerally, there are n ways of making sure an entire message of unknown size is recieved:
1. Include some kind of validation criteria at the beginning of the message : checksum, bytecount, etc.
2. Format the message such that the server can tell when the end is reached (subject to "line noise" problems)
3. Enable two-way communication between the client and server, so they can work it out as they go.
4. Use a pre-established protocol that handles all this for you
5. Close the stream after writing if you only have one message.
6. etc etc etc. -
Sharing DSL between Mac Server and PC client
Hello,
I'm running a small Mac server network of 3 Mac clients and 1 PC. They are all connected via ethernet to a switch. There is a DSL modem also connected to the switch. The modem software was installed on the Mac server.
The Mac clients can access the Mac server as well as access the DSL modem to get on-line. The PC is running XP Pro. I can either set up his LAN network connection to see the Mac server or manipulate the settings in that same LAN network connection to see the DSL modem and get on-line. I can't seem to do both.
On the Macs, I set up separate network configurations with the appropriate tcp/ip settings required for the 2 tasks in question.
It seems like there should be a way to set up another separate LAN connection on the problem PC, much like I did on the Macs, to allow both server and DSL access.
1. Does anyone know if this is possible?
2. Does anyone know of another way to get the pc to see the server and the dsl simultaneously, using the same ethernet connection?
Thank you in advance for any help.
Allan
p.s. The macs are running 10.39 and the server is running 10.1.2.Hi Allan!
I suggest you replace your switch for a router. The purpose of a router is to connect two networks. In your case it would connect your local computer network (Macs, server and PC) to the Internet. Having your DSL on a switch with the rest of your machines means that only one at a time should be able to connect to the Internet.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)
Maybe you are looking for
-
Help with multiple Mail accounts
There are two user accounts on my computer. I am the administrator and recently set-up a .Mac email-only account for the secondary user. Now, in the Mail application, I am receiving the mail for both myself AND the secondary user in my box. How do I
-
Create Automatic Reservation for Goods receipt of FG
When an order is created, the components from the store are reserved automatically. It implies automatic reservation for good issue. What about AUTOMATIC reservation for goods receipt of finished product? Is it possible to make automatic reservation
-
FCP sequence settings for Sony HandyCam video
I'm working with video shot on a Sony Handycam HDR-CX550. I had no problem importing it into iMovie and then to FCP, however I can't figure out what sequence settings I should use. It appears to be 16x9, but shows up as 4x3 in my FCP bin. Also, th
-
First time I've used this discussion forum, so may be posting problem twice! I can't send texts to some contacts in my iphone 4s. This is a recent problem, as previously I could send texts whenever I wanted. The exclamation mark and "not delivered' s
-
APEX Insufficient Privs errors when trying to use dbms_sql.parse
Hello, I have a simple database procedure that changes are user pswd: create or replace PROCEDURE chg_pswd_test(p_userid in varchar2, p_pswd in varchar2) -- Invoker rights allow a user with execute privileges to call a subprogram. -- Definer Rights a