SCCM Package issue

I am currently having issues with a couple of our DP's. It seems like when out Software Update Package gets to be large (10GB) the distribution point will no longer update it with new bits. There seems to be no errors in the log that shows why
it stopped sending the updated revision of the package and all I see in the console is that it doesn't have permissions. But smaller packages work fine. At this point I can resend the package but it will still not download it. These DP's
are over an MPLS network so we have a smaller pipe and have rate limits enabled.
I can not find any where if there is a limit to what the package size can be and I haven't be able to find anybody with the same issue.
Has anybody ran into this issue before? What did you do to resolve it?
We are on SCCM 2012 R2.

I've run into problems with large update packages at multiple customers. I always end up breaking them up into smaller packages. For newly setup customers, I always make sure that the packages are setup in way to make them more granular in nature so they
don't get this big in the first place.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Urgent- returnable packaging issue

Hi guys,
am working on returnable packaging issue
Scenario:If the customer does not returns the preslings then sales order is created for presling and issued to customers with proper invoicing
am creating a sales order with order type CLN(customised for returnable packaging) and i have give material with qty 1, immediately the system is taking me to availability overview screen where it shows the following.
Confirmed quantity: 0
Dely proposal: Not possible.
i have checked for material in MMBE and see the stock is much sufficient. y am i getting this? please answer immediately.
thanks in advance.
kumar.

Hi pathik,
the system is already configured and i have to give UAT to the users. i have done according to what UAT says. now plz suggest me what i should i do in this scenario? moreover, shld i use two line items i mean the main item and also the sub item? this is the first time am working on returnable packating so plz help me in as detail as possible.
u can also plz send me the doc with screen shots(if possible) to this id
[email protected]
thanks in advance.
kumar

Is there a "SCCM Package For Windows 7 (64-bit)" for an X220?

Hey all,
i found the "SCCM package for Windows 7 (32-bit) and (64-bit)" for ThinkPad X230s here...
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS034785
...but is there one for the X220s as well? I only see ones for M82, M92p M92, and X230
any help would much appreciated.

That sounds great - actually based on our early research that is exactly the route we've decided to go.
I don't see a document linked in your post, would you mind re-linking?
Specifically, we'll want to include drivers for lots of x210, x220 and x230 varieties - and there are a lot of them that I don't have available for testing - they are many miles away.
Appreciate the help!
EDIT - I found the document linked in another thread and we've used it to pull in all the drivers we require for the 4 models in our environment. thanks!
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/dml_ur_ti_mdt_2.0.pdf

I can't install 10.5.2 because of an installer package issue. Can anyone help me out?

I recently bought the Iphone 4S and wanted to sync my phone to my PC. I was prompted to download the latest version of Itunes 10.5.2 but the installation was interrupted due to a "installer package issue". Has anyone encountered this issue and resolved it accordingly? Any help would be greatly appreciated.

If you have more than one account now (e.g., one created during the install, and one/more restored from a back up), have you tried installing the combo (110 MB) update from the account you created during the erase & install (the very first admin account created)? If not, try logging into that account and try installing the combo update and see if the problem goes away. Then do a permissions repair (it might take a while).

SCCM Package Deployment issue

Hi All,
I have created one Application package in SCCM 2012, this package has been successfully distributed in DP servers. Some of my client still this package is not showing. I have updated clients side policy as well. I want to check client side logs. So
please suggest which log file I have to check for track down this package progress.
Nirmal Singh IT Administrator

Hi,
Please make sure Application Catalog web service point and Application Catalog website point are installed successfully.(ServicePortalWebService.log and ServicePortalWebSite.log)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SSIS package issues when running as a regular user

Hello
I have one package which is getting data from MSSQL server and putting it to the excel (2007 format).
When started as an administrator from Visual studio, IS, command line or SQL Agent job it works just fine.
But when using regular user (SSIS proxy in SQL Agent job) it does not return any errors, but result Excel file is just empty. It puts only firs row with headers into it.
Only difference I've found when executing as admin and regular user is a warning in package execution detailed log:
OnWarning,SERVERNAME,USERNAME,PACKAGE_NAME,{GUID},{GUID},2014.03.21 15:23:22,2014.03.21 15:23:22,-2147183868,0x,Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve,
run this package as an administrator, or on the system's console.
If I add user to local administrators group it runs just fine.
Trying to search the web I've found that most causes of thet could be UAC enabled on the server. But it is not enabled.
SQLserver - Microsoft SQL Server 2012 - 11.0.2383.0 (X64)
Windows Server 2008 R2
Thanks in advance,
Olegas

It could be also an issue with the access to the %temp% directory.
But I suggest again, you do not rely on turning the logging on that is built into DTEXEC, you need to provide this package right now with thorough logging to find the root cause of the issue. E.g. no access to a shared drive may an issue, too.
Arthur My Blog

SCCM Console issue, SQL connectivity login failed for SCCM machine account

Hi ,
As part of resolving the corrupt SCCM 2012 R2 environment, we have uninstalled the site from the Standalone primary site and restored it from the last backup. The database is on remote server on SQL 2012 SP1. Only Site recovery is run.
Post the restoration on unable to launch the SCCM console, Error Could not connect to the site.
When I checked the logs in the log file SmsProv.log in the program filles\Microsoft Configuration manager\logs, the error is as below
*~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspobjectquery.cpp(6260) : SQL Connection attempt timed out~ SQL Error: [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
*~*~SQL Connection attempt timed out [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
<*><*> CANT CONNECT TO SQL, RETURNING ERROR <*><*>
Regards
Leela

Duplicate post.
https://social.technet.microsoft.com/Forums/en-US/6b26502b-ac07-426c-abe4-6cfdaa45b33b/sccm-console-launch-fails-sql-connectivity-issue-with-sccm-machine-account?forum=configmanagergeneral
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Unexpected Termination SSIS package - Issue with SSIS packages after upgrading to SQL Server 2014

Hello everyone.
We performed an upgrade of SQL Server 2012 installation to SQL Server 2014 (with last CU5 update). We found that all SSIS packages (even the simplest with just Execute SQL tasks) fail with Unexpected termination message. The issue reproduces with both new
packages (that are created from scratch with SSDT 2014) and old packages (migrated from SQL 2012).
Any ideas, please? We googled and found that it is a known issue that should have fixed with CU4. But we use CU5 and the issue is still here.
MCP

Hi. Yes...
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="SQLISServer" />
<EventID Qualifiers="0">1</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-12T07:41:56.000000000Z" />
<EventRecordID>469950</EventRecordID>
<Channel>Application</Channel>
<Computer>abtru1a11.oneabbott.com</Computer>
<Security />
</System>
- <EventData>
<Data>The SSIS Execution Process could not write to the IS catalog: ABTRU1A11\DEV:SSISDB Error details: Cannot find the symmetric key 'MS_Enckey_Proj_Param_5', because it does not exist or you do not have permission.; at System.Data.SqlClient.SqlConnection.OnError(SqlException
exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior
runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion,
Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at Microsoft.SqlServer.IntegrationServices.Server.Shared.ExecutionParameterLoader.GetExecutionParameter() at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.StartPackage()
at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.PerformOperation()</Data>
</EventData>
</Event>
MCP

Queue / Support package issue

Hi everyone!
Can someone give me direction on resolving the following issue?
Ssytem: SAP ECC 6.0
I first updated the Kernel from level 58 to 83. eveything went fine from what I can see.
Then I have been importing a queue to implement some Support Packages. the import has now stopped with the following errors:
I am not too sure what it all means and where to go from there.
Thank you for any explanations or suggestions
Regards
Corinne
1 ETP199X######################################
1 ETP152 TESTIMPORT
1 ETP101 transport order     : "SAPK-60007INISOIL"
1 ETP102 system              : "QAS"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "370.00.09" "700"
2EETW165 Function "OIUREP_GET_RECENT_ROYHIST (OIUREP_ROY_HISTORY|05)" does not fit into the existing function group "(OIUREP_ROY_REPORTING|09)".
2 ETW167 Please transport the whole function group.
2EETW165 Function "OIUREP_GET_RECENT_VOLHIST (OIUREP_ROY_HISTORY|06)" does not fit into the existing function group "(OIUREP_ROY_REPORTING|10)".
2 ETW167 Please transport the whole function group.
1 ETP152 TESTIMPORT
1 ETP110 end date and time   : "20070213113558"
1 ETP111 exit code           : "8"
1 ETP199 ######################################

Hi Ammey and others ,
The queue import failed with the same error.
I have found in note 822379 that this message can actually be ignored.
SAPK-60006INISOIL - SAPK-60007INISOIL
           Symptom: If the Support Packages SAPK-60006INISOIL und SAPK-60007INISOIL are imported together in a queue, the TEST_IMPORT step returns an error for Support Package SAPK-60007INISOIL. The following error messages are displayed in the test import log:
Function OIUREP_GET_RECENT_ROYHIST (OIUREP_ROY_HISTORY 05)
   does not fit into the existing function group.
   (OIUREP_ROY_REPORTING 09)
Function OIUREP_GET_RECENT_VOLHIST (OIUREP_ROY_HISTORY 06)
   does not fit into the existing function group.
   (OIUREP_ROY_REPORTING 10)
           Solution: You can ignore this error by choosing 'Extras'-> 'Ignore test-import error'. The error will not occur during the later import.
based on your latest message (2.39 PM) suggesting to ignore "Warnings" I should be able to mark the queue now as "Ignore test-import errors" and bypass my original error. That was the only error of type 8 or above.
Thank you
Corinne

SCCM/WSUS issue after importing March CSA patch bundle

Hi, I am having an issue with security patch deployment since Tuesday night. Debugging is ongoing. I am running SCCM 2012 CU2.
Coincidentally, the problem appeared shortly after importing the March XP CSA (Custom Support Agreement) patch bundle into SCCM. From the client end, WUAHandler.log reported continuous failures/retries. On lower-end machines, system performance
became very poor. From the server end, starting up the Windows Server Update Services mmc (yes, I know you're not supposed to be doing anything in here, which I'm not) results in a connection error. The detailed error message is shown further down.
It was difficult to get the client machines to stop "thrashing" per WUAHandler.log. It wasn't until I de-installed/re-installed WSUS and ASP.NET that things quieted down yesterday afternoon. All appeared to be stable until this morning
when I re-added "Windows XP Custom Support" under the SUP Component Properties tab, imported the CSA bundle info, initiated a CAB synchronization from Microsoft, and re-enabled Software Updates on the clients.
Again, I would get the error when starting up the Windows Server Update Services mmc.
I am doing everything again, but this time one step at a time. My working theory is that there is some kind of corruption caused by the CSA import (this worked just fine up until Feb.). A few hours ago, Microsoft published a new CSA
patch bundle because a patch was apparently forgotten. Is it possible that there was some kind of corruption included with the original bundle published on Tuesday?
I will post what I find as a result of my debugging.
Thanks,
Nick.
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.IO.IOException -- The handshake failed due to an unexpected packet format.
Source
System
Stack Trace:
   at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Threading.ExecutionContext.runTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
** this exception was nested inside of the following exception **
System.Net.WebException -- The underlying connection was closed: An unexpected error occurred on a send.
Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.GetUpdateServer(PersistedServerSettings settings)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServer()
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServerAndPopulateNode(Boolean connectingServerToConsole)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.OnExpandFromLoad(SyncStatus status)

Yes, WCM.log showed the same 503 error starting on the Wednesday morning at 2:53am, and I also noticed wsuspool had stopped. My most noticeable symptom was the thrashing of wuahandler.log on the clients, causing poor system performance on machines with 2gb
of memory. Multiple de-installs/re-installs of WSUS failed to clear the issue until we increased the memory setting in IIS.
Nick
WCM.log:
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String
ServerName, Boolean UseSSL, Int32 PortNumber) $$<SMS_WSUS_CONFIGURATION_MANAGER><03-11-2015 02:53:26.225+240><thread=30872 (0x7898)>
Remote configuration failed on WSUS Server.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-11-2015 02:53:26.226+240><thread=30872 (0x7898)>

Renaming SCCM package application catalog using powershell

I am trying to change the application properties in SCCM Configmgr2012 of over 2000 applications, i need to have the Application Catalog name changed to match the package Name, for doing this i need to design a power shell script, since i am new to
power shell i am not sure what parameters i should use and appropriate functions to be used. if anybody has created something similar please share information on this. Hope i am clear with my question.
Thanks.
Example
Path: Software library-Overview-Application Management-Applications-Adobe
Application-Right click-properties-General Information tab-Name
Adobe_Acrobat X Pro_10.0.0_01
Application-Right click-properties-Application catalog-Localized application name Adobe_Acrobat X Pro -English

That the applications are not in the same folder is not a problem, as you can iterate through all applications without knowing the folder location. The problem is that if you want to script this there needs to be a starting point. Something that's the
same for all application names, so you can script something to get a specific part of the name.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM Distribution issue

Hi All,
we have a strange issue here, our primary server is trying to remove some package on a DP which is not existing.
also it is creating n number of files on the DP, please find the below log and help me.
CContentDefinition::RemoveContentFromPackage failed; 0x800700b7
Failed to delete file
\\xxxxxxxxxxxxxxxxxx\F$\SCCMContentLib\PkgLib\ABC001D5.INI, error = 5
Failed to move file
\\xxxxxxxxxxxxxxxxx\F$\SCCMContentLib\PkgLib\ABC001D5.INI.0b10c857 to
\\xxxxxxxxxxxxxxxxxxxx\F$\SCCMContentLib\PkgLib\ABC001D5.INI, error = 183
WritePrivateProfileStringW failed for
\\Xxxxxxxxxxxxx\F$\SCCMContentLib\PkgLib\ABC001D5.INI
ProfileWriteString failed; 0x800700b7
CContentDefinition::RemoveContentFromPackage failed; 0x800700b7
Prashanth Kumar System Center Administrator

Error code 5 = "Access Denied and error code 183 = "Cannot create a file when that file already exists."
Thus, it's trying to delete a file (probably a previous version) and then write the number version but it can't delete the file because its getting access denied which in turn causes it to fail with the second error.
You'll need to figure out why it's getting access denied. In many/most cases I have seen with similar symptoms, this comes down to your AV software and not having the proper exclusions in place.
Jason | http://blog.configmgrftw.com | @jasonsandys

SSIS package issue

I need to schedule job to run through a package.
for that i imported SSIS package by connecting Integration services after import done it showing there in MSDB.
Now i connected to SQL DB engine to see and schedule asa job for the imported package but i am not able to see the imported package in maintenance plans. so totally confused with this behavior of package.
I have alternate for schedule this package through new job steps so i done it and then when i run the job it getting error as "login failure for user", here the user is service account, so please help in this issue.
Thanks,
Janardhan

Hi Janardhan,
According to the error message that “login failure for user”, it seems that SQL Agent Service account does not have required privileges to access the data sources in your SSIS package. Please check if the service account has enough permissions.
Please note that to configure a user to execute Microsoft SQL Server Agent jobs, we should grant the user with the following SQL Server Agent fixed database roles in the msdb database:
SQLAgentUserRole, SQLAgentReaderRole, or SQLAgentOperatorRole. Just as SequelMate suggested, If the user is non-administrative user that want to run jobs to execute SSIS packages, they will need to have access to a proxy account that has the
required privileges and then run the SSIS package under this account. Please check the issue again.
Reference:
Configure a User to Create and Manage SQL Server Agent Jobs
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

USER RUN PACKAGE ISSUE IN BPC NW 7.5 SP 7

Hello,
One of my User is getting Run Package Error while accessing through BPF Instance. It throws the following Error
"PACKAGE DOES NOT EXIST OR YOU DO NOT HAVE AUTHORITY ON THIS PACKAGE" , but other users in the team are able to Run the Pkg.
This user has the same authority as the other users of his team.
Please help me regarding this.
Venkata.

Hi Roberto,
Thank You for the note, This issue is actually persisting to only one user of the team. Wheras other users in the same team were successfully able to execute the Package.
As per the note you provided, I have checked that "File" and "Group" are correct.
Kindly provide a solution for the above problem.
THANK YOU.
Edited by: RaghuKishore on Mar 9, 2012 2:07 PM

SCCM 2012 - Issue

Hi All,
Unfortunately one of my collegue deleted the primary server computer account. But with a good back up i have recovered the primary site server back to normal condition. Since then i got some errors throwing up from the console. Please help
1. Databse Link between Primary server and secondary server is down
2. Under component status - component manager throws a error (Configuration Manager cannot update the already existing object "cn=SMS-MP-BUL-XXXX.XXXX.NET" in Active Directory (SWAD.NET).). I deleted the object in system management and it has created.
But still i get the same error message
Replication analyser log:
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : rule:IsBrokerDisabled does not have any dependent rules
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Rule IsBrokerDisabled result: passed.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Rule: IsBrokerDisabled executed SUCCESSFULLY. Adding it to success list.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Running rule: IsBrokerDisabled.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Running rule: <IsBrokerDisabled siteCode="JUN" sqlServerName="XXXX.XXXX.NET\CONFIGMGRSEC" ></IsBrokerDisabled>
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsBrokerDisabled execution
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsBrokerDisabled
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : rule:IsBrokerDisabled does not have any dependent rules
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Rule IsBrokerDisabled result: passed.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Rule: IsBrokerDisabled executed SUCCESSFULLY. Adding it to success list.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="XXXX.XXXX.NET\SCCMINS" ></IsSysCommitTabError>
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : The last time sys.syscommittab error was checked at 04/30/2014 16:44:00.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL\SCCMINS on XXXX.XXXX.NET.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.SCCMINS\MSSQLServer\Parameters\SQLArg0 on XXXX.XXXX.NET.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.SCCMINS\MSSQLServer\Parameters\SQLArg1 on XXXX.XXXX.NET.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance XXXX.XXXX.NET\SCCMINS is F:\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\F$\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\F$\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Done checking the file
\\XXXX.XXXX.NET\F$\DATA\SCCMINS\MSSQL11.SCCMINS\MSSQL\Log\ERRORLOG since all other lines in the file are earlier than last check date and time.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Getting results of rule: IsSysCommitTabError execution
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Loading result Xml from rule:IsSysCommitTabError
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : rule:IsSysCommitTabError does not have any dependent rules
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Rule IsSysCommitTabError result: passed.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Rule: IsSysCommitTabError executed SUCCESSFULLY. Adding it to success list.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Running rule: IsSysCommitTabError.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Running rule: <IsSysCommitTabError SqlInstanceName="XXXX.XXXX.NET\CONFIGMGRSEC" ></IsSysCommitTabError>
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : No last check date or time. Checking all error logs.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL\CONFIGMGRSEC on XXXX.XXXX.NET.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQLServer\Parameters\SQLArg0 on XXXX.XXXX.NET.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQLServer\Parameters\SQLArg1 on XXXX.XXXX.NET.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : SQL's error log file for SQL instance XXXX.XXXX.NET\CONFIGMGRSEC is C:\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.
30/04/2014 17:16:47: ReplicationLinkAnalysis Information: 1 : Scanning SQL error log files for the string [Error: 2601,].
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.1.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.1.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.2.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.2.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.3.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.3.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.4.
30/04/2014 17:16:47: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.4.
30/04/2014 17:16:48: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.5.
30/04/2014 17:16:48: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.5.
30/04/2014 17:16:48: ReplicationLinkAnalysis Verbose: 1 : Checking SQL error log file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6.
30/04/2014 17:16:48: ReplicationLinkAnalysis Verbose: 1 : Reading content of file
\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6.
30/04/2014 17:16:48: ReplicationLinkAnalysis Information: 1 : Completed replication link analysis thread.
30/04/2014 17:16:48: ReplicationLinkAnalysis Information: 1 : Enumerating failed rules list.
30/04/2014 17:16:48: ReplicationLinkAnalysis Information: 1 : Enumerating succeeded rules list.
30/04/2014 17:16:48: ReplicationLinkAnalysis Information: 1 : Returning Executed rules.
30/04/2014 17:16:48: ReplicationLinkAnalysis Error: 1 : Could not find file '\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6'.
30/04/2014 17:16:48: ReplicationLinkAnalysis Error: 1 : System.IO.FileNotFoundException: Could not find file '\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6'.
File name: '\\XXXX.XXXX.NET\C$\Program Files\Microsoft SQL Server\MSSQL11.CONFIGMGRSEC\MSSQL\Log\ERRORLOG.6'
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.IsSysCommitTabError.ReadFileContent(String sqlErrorLogFile)
   at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.DataStoreWrapper.ReadFileContent(AccountInfo accountInfo, String serverName, String fileName)
   at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.IsSysCommitTabError.ScanLogFilesForError(Boolean checkAllLogs, DateTime checkDate, String sqlErrorLogPath, String comparisonString, DateTime& matchingLineDate)
   at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.IsSysCommitTabError.Run()
   at Microsoft.ConfigurationManager.ReplicationLinkAnalyzer.ReplicationLinkAnalysisEngine.RunRulesInBackground(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
30/04/2014 17:17:38: ReplicationLinkAnalysis Verbose: 1 : Deleting certificate for XXXX.XXXX.NET from local certificate store.
30/04/2014 17:17:38: ReplicationLinkAnalysis Verbose: 1 : Deleting certificate for XXXX.XXXX.NET from local certificate store.
30/04/2014 17:17:38: ReplicationLinkAnalysis Information: 1 : Uninitialized the link analysis engine.
Regards, Pratap

Yes primary server account and installation account as local admin privelege on all the site servers
I have recovered secondary site server successfully from primary site server console but I am getting some error below. Need your kind support
1. I am getting "Configuration Manager cannot create the object "cn=SMS-MP-XXX-XXX.XXXX.NET" in Active Directory (XXX.NET)". I get this error out of 5 secondary site server. I get the above error for 4 secondary site server
2. "Package Transfer Manager failed to update the package "BUL00002", Version 3 on distribution point". It is asking to check "Site server does not have sufficient rights to the source directory." which it has
3. I can deploy package from sccm but it is not getting deployed. Is that above affecting it?
Regards, Pratap

SCCM Package issue

Similar Messages

Maybe you are looking for