SCCM Reports Issues
Hi,
SCCM reports aren't working for some reasons either from web or from console.
They are taking too long and keeps on the screen where it says "loading" and finally it comes up with below errors.
Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.InvalidOperationException
Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
I have tried searching for "Client found response content type of '', but expected 'text/xml'." on web but didn't get anything useful.
Could you please assist?
Hey Peter,
Actually there were very few who got exactly this error
Client found response content type of '', but expected 'text/xml'.
They were facing different errors like
Client found response content type of 'text/xml', but expected 'text/xml' + etc..
Many tried reinstalling the Reporting point role but even that didnt fixed the issue.
I am just trying to make sure if there are any alternatives to this before i have to reinstall the reporting
service role (as there are many customized SQL reports we use)
I believe this is something which happened after upgrading to R2 and affecting some reports and not all.
Similar Messages
-
Hi all,
I'm still running SCCM 2007 in my environment and having issue with the report site, whenever I add a new server to my environment and SMS agent installed (push by SCCM console to install agent), it would take up few hours or day to show this new server
on the Compliance/Non-compliant report site. But if I deleted an existing server on SCCM console, it will remove right away from the report. Not sure what is the problem and new in here.Can't tell, would like someone to tell me the problem. If I know, I won't ask.
Ok let me put it a different way. Based on what you have said, there is nothing wrong with your CM07 environment.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
SCCM 2012 R2 Reporting issue updating SQL Reporting permissions
I am in the process of setting up SCCM 2012 R2. I am having an issue with the SCCM reporting. If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
(!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)]. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
No folder configuration information found. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
Does anyone know how to fix?
I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things.I am in the process of setting up SCCM 2012 R2. I am having an issue with the SCCM reporting. If I set the permissions in the SCCM console, the permissions do not propagate to the SQL reporting... I get this... This is from SRSRP.log...
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_DIT $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.384+300><thread=5432 (0x1538)>
(!) Error retrieving folders - [A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.)]. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.438+300><thread=5432 (0x1538)>
No folder configuration information found. $$<SMS_SRS_REPORTING_POINT><01-15-2015 12:00:55.441+300><thread=5432 (0x1538)>
Does anyone know how to fix?
I tried removing and re-installing the reporting point, changing the permissions in SQL Server... and a dozen other things. -
SCCM Reports Will Not Run - SQL Connection Issue
We have SCCM 2012 R2 CU2 and SQL 2012 SP1 CU6. We used to build our SCCM suites with SQL on the site server and have never had this problem that we now have on a new suite but this time we hosted SQL on its own server (SQ01) separate from the site server.
SCCM made the SQL server a component server (makes sense) and forced us to put Reporting Services on the SQL server (when trying to put it on the site server it would not find the instance-CM01, as that one has SSRS on it). The site server is ABC01. We've
already fixed a couple errors in regards to this issue.
The Reporting Services installed on SQ01 fine. When you go to reports in admin console it loads the 419 default SCCM reports just fine. But none of them will run properly. They open up but a popup appears with this error in the error details popup:
"An error has occurred during report processing....AbortedException: An error has occurred during report processing...ReportProcessingException: Cannot create a connection to data source AutoGen__(many numbers). System exception..."
If you go to SQ01, open Reporting Services Config Mgr, connect to instance SC01, click the URL under Report Manager URL, it prompts you for a logon (but should not do so) and you can log in with the service account selected when the Reporting services were
installed in SCCM Admin Console, drill down into ConfigMgr_ABC, click on the default created data source named {bunch of numbers}, and herein there are two more problems....1) it doesn't save the pwd for the service account, when clicking test connection we
often have to reenter it, and 2) the ConnectionString has this entry for Source="ABC01.fqdn/CM01" but it will never connect with that. If we change it to just "CM01" and it is currently holding the pwd, it will test connect successfully
but after just a few minutes it won't because something has reset the connection to "ABC01.fqdn/CM01" and forgotten the pwd. It is apparent that something is overwriting the settings in a way SQL currently doesn't like.
Also, we have an alias within SQL in this format "SQ01.fqn/CM01" when SQL already has a "CM01" alias. This seems to be a problem too.
Any input appreciated.
Ben JohnsonWYOK, I'm duly web-embarrassed. Apparently due to some firewall blockage, my Admin Console on my workstation (which is in a different VLAN from these servers), could not save the changed Reporting Services configs to SQL. When we made the changes using the
Admin Console on ABC01, it all started working.
Ben JohnsonWY -
Dear all,
We have an issue with access SCCM report through IE , it is working from console but have issue if we access through IE 11, it is loading for long time. Any idea what would be the issue ?
Thanks,
SengottuvelHow is SQL and ssrs setup? I'm sorry to say that this is not going to be a CM12 problem but a SQL problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
SCCM report data are missing inside report since Update SCCM 2012 to R2 Cu1
Hi All,
I encountered an issue regarding certains SCCM reports after migrating to SCCM R2 CU1.
After this upgrade, I've already encountered some issues on differents reports .. reports where we need to select a collection or patches or computers from a drop list (all theses drop list were empty).
I resolved these issues by adding the "read" security permission in the security role dedicated to our Support Team. (Read permission is now applied on Collections, Packages ect...)
This sort of report works well now.
But this same Team show me another issue where I did not find any resolution.
In the categorie called "Hardware - General", we have a report named "Computer information for a specific computer" where, as you know, we normally could find some informations regarding a computer.
In fact, the only informations which are visible through this report are the NetbiosName,Username, Domain User & computer and IP adress.
All others informations are not displayed.
If I use this report with a user who has admin rights in SCCM (which is not the fact with my support team of course) ...all informations are displayed normally.
It seems that it looks like the first read rights issue that I encountered at the beginning, but I did not find where could be the cause of this issue
Does anyone has already seen this sort of issue ?In CM12R2 RBA is now enabled for report. So this tell me that you have NOT grant the support team access to the data and therefore this is normal.
There is a quick fix for this see Brian post.
http://www.mnscug.org/blogs/brian-mason/162-report-user-role
http://www.enhansoft.com/ -
Hi,
I have run a stage analysis report but it says no data inspite of open opportunities being present in the system. Could anyone kindly let me know what could be the issue?
Regards
SharatHi Sharat,
Welcome you to the forum. Please close your first thread.
Regarding your Stage Analysis Report Issue, what selection has been made? This report show closed opportunity only.
Thanks,
Gordon -
SCCM Report for Applicable and Installed Updates Collection Wise
Hi All, I was looking for a report on Applicable and Installed Updates Collection Wise and got this below query on the Internet and want to create a SCCM report with this below query. How to make this query working in SCCM report?
Do I need to add prompts, if yes please guide me on adding prompts.
SELECT
DISTINCT
SYS.Name0
AS [Server Name], SIS.SMS_Installed_Sites0 AS [Site Code], UCS.Status AS [Patch Status Code],
CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status', UI.BulletinID AS [Bulletin ID],
UI
.ArticleID AS [Article ID], UI.
Title
FROM
v_R_System AS SYS LEFT OUTER
JOIN
v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER
JOIN
v_UpdateInfo
AS UI ON UCS.CI_ID = UI.CI_ID INNER
JOIN
v_RA_System_SMSInstalledSites
AS SIS ON SYS.ResourceID = SIS.
ResourceID
WHERE
(UCS.Status IN ('2', '3')) AND (UI.ArticleID IN ('972270', '974392', '973904', '969947')) AND (SYS.Name0
IN
(SELECT DISTINCT v_FullCollectionMembership.
Name
FROM v_FullCollectionMembership INNER
JOIN
v_R_System
ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
v_FullCollectionMembership
.CollectionID IN ('Collection ID'
ORDER
BY
[Patch Status Code]Yes it can be done and please run the query which i have shared in the thread
I again pasted the query for you below..
SELECT DISTINCT
SYS.Name0 AS [Server Name], CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status',
UI.BulletinID AS [Bulletin ID], UI.ArticleID AS [Article ID], UI.Title
FROM v_R_System AS SYS LEFT OUTER JOIN
v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER JOIN
v_UpdateInfo AS UI ON UCS.CI_ID
= UI.CI_ID
WHERE (UCS.Status IN ('2', '3')) AND (SYS.Name0 IN (SELECT DISTINCT v_FullCollectionMembership.Name
FROM v_FullCollectionMembership INNER JOIN
v_R_System ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
v_FullCollectionMembership.CollectionID
IN ('XXX00000')))
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights -
SCCM Report for Laptop Battery Condition
Good morning,
We are in a situation where we're needing to monitor conditions of laptop batteries in the school district I manage. I have added the laptop batteries class(Win32_Battery) and have all required/requested information checked under this class. This
has been set for a week, so all devices should be inventoried by now.
How do you recommend my getting a report together that shows battery condition/etc? The fields I would like to see are ones such as:
Win32_Battery
battery status
design capacity
design voltage
Expected Life
Error Description
Full Charge Capacity
Really anything that will help us in knowing which laptops batteries need replacing.
I am not that knowledgeable about SQL reporting/SCCM reporting, so any help in getting this is greatly appreciated. Any resources that you can point me in for getting more familiar with creating my own reports would be greatly appreciated. I
don't even know where to begin.
Thank you!Good you have added the class. Please use the following link for the detailed information about Win32_Battery:
https://msdn.microsoft.com/en-us/library/aa394074(v=vs.85).aspx
Last Full Charge should guide your decision on replacement.
Following link will help you as well:
http://www.helpwithwindows.com/Windows7/Check-your-laptop-battery-health-in-Windows-7.html
-RG -
1. 30 documents of 2009 were matching and post with clear is perfomred. After performing post with clear also the line items are not moving from open line items. When we download the open line items as of today, these line items are appearing.
2. When we download the ZBLRFIOI report for GRIR a/c 349100 to have the opne line items. we have some set of documents showing as " FI Open items without J2" - This is reporting issues.
Thanks
MallikarjunaHi
Pls try with F.13 for that GR/IR account 349100 by selecting check box select gl accounts
And give Company code, year and pending document numbers in selection screen
And before that pls make sure that OB74 clearing settings maintained or not
It will clear all the open items exists
Reg
Vishnu -
Hi,
I am facing one reporting Issue relating to Display Attributes.
Characteristic: Business Partner
Display Attributes: Address0, Address1, Address3...etc.
Requirement is to display mentioned Display attributes along with Business Partner.
For this I have selected Business Partner as characteristic and mentioned above three as display attributes to Business Partner.
But Query out put is not showing Display attributes. For this I have done all settings at reporting level, all gone vain.
I am using Bex 7.0.
Kindly look in to the Issue and let me know the solution.
Regards,
Venkat.Mahipathi.
09886652422.
[email protected]Hi,
Check in Reporting properties or check attributes in analyzer proprties then it will display
************asign points if usefull***********
swapna -
I need to create an SCCM report to show last logged on user on all machines and the Active Directory department attribute of that last logged on user.
You problem is here.
right
join v_R_User USR on USR.ResourceID
= CS.ResourceID
USR.ResourceID != CS.ResourceID, you need to map the username to the user logon to the PC. By using the user’s department information you will
end up with unreliable results.
Anyways you need to make these changes to your query.
left
join v_R_User USR on USR.Unique_User_Name0
= CS.UserName0
http://www.enhansoft.com/ -
SCCM report on last time each Office application was used
I have set up the correct SCCM software metering rules for each of the Office suite executables like Outlook.exe, MsWord.exe etc. I would like to report on usage of each executable in the Office suite. This is useful for us because we can work out things
like if a user only uses Outlook and nothing else in the Office suite then we can move them to Outlook Web Access and uninstall Office, therefore reducing the number of Office licenses required.
I'm sure the data is there but not sure how to extract it. For all the machines in the environment, I would like to have a report showing something like this:
Name Last date Outlook.exe used Last date Excel.exe used
PC001 01/01/2011 15/03/2011
PC002 02/02/2011 Never run
PC002 Never run Never run
There doesn't seem to be an existing report that I could use / modify, just wondering if anyone has attempted this before?I wonder, what is the use of this report. I think, you can try to create a custom report with the help of two links given below?
http://myitforum.com/cs2/blogs/jmarcum/archive/2011/05/19/157675.aspx (Beginners Guide to Writing SCCM Reports)
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=22052 ()Creating Custom Reports By Using Configuration Manager 2007 SQL Views)
Anoop C Nair - Twitter @anoopmannur
MY BLOG:
http://anoopmannur.wordpress.com
SCCM Professionals
This posting is provided AS-IS with no warranties/guarantees and confers no rights. -
SCCM report query that displays count of cpus per host and if host is physical or virtual
Hello,
I have this query that displays the count of CPUs per host. How can I add a column to show if the host a physical or virtual?
SELECT
DISTINCT(CPU.SystemName0) AS [System Name],
CPU.Manufacturer0 AS Manufacturer,
CPU.Name0 AS Name,
COUNT(CPU.ResourceID) AS [Number of CPUs],
CPU.NumberOfCores0 AS [Number of Cores per CPU],
CPU.NumberOfLogicalProcessors0 AS [Logical CPU Count]
FROM [dbo].[v_GS_PROCESSOR] CPU
GROUP BY
CPU.SystemName0,
CPU.Manufacturer0,
CPU.Name0,
CPU.NumberOfCores0,
CPU.NumberOfLogicalProcessors0I see that you have posted this exact question in another forum for CM12, however this is an CM07 forum.
Are you CM07 or CM12?
If you are CM12, use my answer here.
http://www.systemcentercentral.com/forums-archive/topic/sccm-report-query-for-cpu-cores/
If you are CM07, this is NOT a simple how exactly do you detect that a computer is a VM? You can guess by looking at the manufacturer name but it is only a guess.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
User report issues in 1.1.0.21.97
A couple of issues i'm experiencing with user reports on Mac OS X in the latest pre-releas build
first off, if I am asked for a password (first time I use the connection) there is no feedback if the connection fails (worng password for instance)
The second problem I'm facing is every time I try to rerun a certain master-detail report I'm getting an NPE
this is the stacktrace:
22-nov-2006 15:37:31 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
22-nov-2006 15:37:33 oracle.dbtools.raptor.controls.display.DisplayResultTable getUI
INFO: DisplayResultTable.getUI()
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.dbtools.raptor.controls.display.DisplayPanel.refresh(Unknown Source)
at oracle.report.addin.ReportEditor$1.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1882)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2202)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
at java.awt.Component.processMouseEvent(Component.java:5554)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5319)
at java.awt.Container.processEvent(Container.java:2010)
at java.awt.Component.dispatchEventImpl(Component.java:4021)
at java.awt.Container.dispatchEventImpl(Container.java:2068)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4256)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3936)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3866)
at java.awt.Container.dispatchEventImpl(Container.java:2054)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3869)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
reloadBuffers(): 53 nodes checked in 0.006489 second(s)
reloadBuffers(): 53 nodes checked in 0.005422 second(s)
reloadBuffers(): 53 nodes checked in 0.004306 second(s)
22-nov-2006 15:43:17 oracle.report.addin.ReportEditor updateContent
INFO: ReportEditor.updateContent()
only happens with master-detail report
Message was edited by: Barsema
barsemaWe have verified the connection error on the latest evaluation build is working as expected. i.e. if you supply wrong password you get alerted to that. This has been verified on the windows and Mac OS X. Please try the latest evaluation release 1.1.0.22.71.
Your reports issue has also been addressed.
Sue
Maybe you are looking for
-
Safari crashes immediately every time I open it.
Hi guys, Just out of the blue, my safari has decided to quit working. I opened it this morning and the Safari opened displaying a blank page for approx. 4-5 seconds then crashed. I've tried several times and I can't even get it to stay open long enou
-
RH9, oracle 9.2.0.2, ORA-00604 error
Hi, I got a del 400 sc pc, with 512 Mb Ram and 1024 MB swap. I have installed rh9 and oracle 9.2.0.2, following Yours RH9 and 9i howto, and all goes well. I linked dbca with my jdk 1.4 (following instructions) But I got an ORA-00604 error connecting
-
How do i get my macbook to stay connected to my wireless network . i have to constantly rejoin it when i go online. Wayne
-
i have to make a animation, in which their are images on each other once i start cutting the above image with scissor it start showing the image which is below the above image. can anyone help me, any help is highly appreciated.
-
Hi guys! I'm developing a forms solution with FormsCentral. I need some light in a particular aspect of it. But first, the big picture: It's a form system for teachers to use, to write reports on the classes they give. It's a music school, so the for