SCCP 8945 not registering with new instal for 2921 with CME 10.0

I have phones which won't register at all. They seem to be missing files, but I downloaded the CME 10.0 ZIP and TFTPd it to the router and phones have access to all 10 files that I will list below. This is a snip of the failures from the actual phone have been attached. TFTP bindings have been attached. Telephony service and voice service voip config has also been attached. Sho ephone register has also been attached.
Seems like the main problem so far is the phones cannot find the files, but the files needed are no where to be found at cisco.com under the 8945 downloads page.
I need all the help I can get

Also these files I have in TFTP now on the router are the only ones I found on the 8945 downloads page on cisco.com:
9       111552 Aug 23 2014 09:49:36 -07:00 SCCP8945/BOOT894x.0-0-2-0.bin.sgn
10      110004 Aug 23 2014 09:50:16 -07:00 SCCP8945/BOOT8941_8945.0-0-1-0.bin.sgn
11     3145116 Aug 23 2014 09:57:06 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin2.sgn
12     3145116 Aug 23 2014 10:00:52 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin3.sgn
13     3145116 Aug 23 2014 10:05:08 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin4.sgn
14     3145116 Aug 23 2014 10:09:20 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin5.sgn
15     3145116 Aug 23 2014 10:12:50 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin6.sgn
16     3145116 Aug 23 2014 10:16:30 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin7.sgn
17     3145116 Aug 23 2014 10:21:34 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin8.sgn
18     2210816 Aug 23 2014 10:25:10 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin9.sgn
19         667 Aug 23 2014 10:25:38 -07:00 SCCP8945/SCCP894x.9-4-2-8.loads
Files My phones seem to be missing are:
English_United_States/gb-sccp-sip.jar
United_States/g3-tones.xml
CTLSEP<MAC Address>
Failure is here:
Authenticating SCCP894x.9-4-2-8.loads file successfully.
BOOT894x.0-0-2-0.bin.sgn
SCCP894x.9-4-2-8.bin1.sgn
SCCP894x.9-4-2-8.bin2.sgn
SCCP894x.9-4-2-8.bin3.sgn
SCCP894x.9-4-2-8.bin4.sgn
SCCP894x.9-4-2-8.bin5.sgn
SCCP894x.9-4-2-8.bin6.sgn
SCCP894x.9-4-2-8.bin7.sgn
SCCP894x.9-4-2-8.bin8.sgn
SCCP894x.9-4-2-8.bin9.sgn
image_flag = 9
14:03:46, 08/01/2013 : upgrade SCCP894x.9-4-2-8.bin1.sgn from 10.244.47.65
Error code 1: No such file
File transfer error.
tftp_download_file, 185
tftp_download_file, 202
14:03:46, 08/01/2013 : upgrade SCCP894x.9-4-2-8.bin1.sgn fail (read fail)
*** cfgmgr_loads_task 785 callback return ***
14:03:46, 08/01/2013 : Upgrade Failed
Need to download locale resources. (English_United_States, , 10.244.47.65/getfontfail, ge
fontfail, 10.244.47.65)
Download English_United_States/gb-sccp-sip.jar ...
Error code 1: No such file

Similar Messages

Can not register a new machine with Updatemanager

Hi,
I just install a new machine with Solaris 10 using a Flash image and Live Upgrade. The original machine from we create the Flash image was registered succesfull using Update Manager.
Now, when I try to register the new machine, the applications ask me the user and password, but do not makes anything. The dialog freeze. The only way to stop the Update Manager is killing them (at the end is the full java error stack).
I try with sconadm,
sconadm register -a -r /var/tmp/registration.profile
Unsuccessfull too, with the same stack error (Caused by: javax.management.InstanceNotFoundException: ).
I'm bored with the Solaris patch system: all the weekend was saying error 500 for all my other registered machines, and now I can not register a new machine....
This system fails all the time.. Is runing under W2K3 server???
Any Idea?
Thanks in advance.
H.
P.S: Error stack output:
Exception occurred during event dispatching:
java.lang.reflect.UndeclaredThrowableException
        at $Proxy1.getInstanceName(Unknown Source)
        at com.sun.scn.client.SCNClientSession.login(SCNClientSession.java:371)
        at com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter.loginAccount(ClientLoginCacaoAdapter.java:209)
        at com.sun.cns.basicreg.wizard.cli.CmdLineWizard.outCall(CmdLineWizard.java:1109)
        at com.sun.cns.basicreg.wizard.cli.CmdLineWizard.output(CmdLineWizard.java:773)
        at com.sun.cns.basicreg.wizard.swing.WizardPanel.isNavigationAllowed(WizardPanel.java:1337)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog.okByNavigationListener(WizardDialog.java:583)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog.access$100(WizardDialog.java:64)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog$NextButtonActionListener.actionPerformed(WizardDialog.java:404)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:5517)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
        at java.awt.Component.processEvent(Component.java:5282)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3984)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.dispatchEvent(Component.java:3819)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.Window.dispatchEventImpl(Window.java:1791)
        at java.awt.Component.dispatchEvent(Component.java:3819)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
        at java.awt.Dialog$1.run(Dialog.java:535)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: javax.management.InstanceNotFoundException: com.sun.scn:name=SCNBaseServiceFactory,assetSubProfile=Factory,host=alcaudon.tsc.uc3m.es,assetProfile=Factory,scnType=ServiceFactory,Vendor=Sun Microsystems Inc
        at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1010)
        at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:1349)
        at com.sun.jmx.mbeanserver.JmxMBeanServer.getClassLoaderFor(JmxMBeanServer.java:1300)
        at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:285)
        at com.sun.cacao.agent.DispatchInterceptor.getClassLoaderFor(DispatchInterceptor.java:548)
        at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.getClassLoaderFor(AccessControlInterceptor.java:427)
        at com.sun.jdmk.JdmkMBeanServerImpl.getClassLoaderFor(JdmkMBeanServerImpl.java:1130)
        at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.getClassLoaderFor(InstrumDefaultForwarder.java:153)
        at javax.management.remote.rmi.RMIConnectionImpl$4.run(RMIConnectionImpl.java:1308)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.management.remote.rmi.RMIConnectionImpl.getClassLoaderFor(RMIConnectionImpl.java:1305)
        at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:768)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
        at sun.rmi.transport.Transport$1.run(Transport.java:153)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
        at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
        at java.lang.Thread.run(Thread.java:595)
        at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
        at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
        at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:126)
        at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
        at javax.management.remote.rmi.RMIConnectionImpl_Stub.invoke(Unknown Source)
        at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:972)
        at javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:201)
        ... 39 more

Well,
The problem was a Memory problem: The swap file was misconfigured. Once the system reboots with the correct swap configuration I was able to register the machine.
Anyway, the problem to connect with SunSolve is continous, but it is other point of discussion.
I hope this solution can help people with similar problems.
H.

HT201210 I upgraded from iPhone 3G to 4S a few days ago. I choose the option to restore from my last 3G backup. It worked fine but I just realized that I do not have the new apps which come with the 4S. What should I do? Thanks for any help. Léo

I upgraded from iPhone 3G to 4S a few days ago. When setting up the new 4S, I choose to restore my last 3G backup. It started by updating the OS to version 5.1 (9B179) then restored my apps and setting. Everything went well except that I realized I do not have the new apps which come with the 4S, like FaceTime, HD video and Siri.
What should I do to correct this?
Thank you in advance for any help on this.

Ah, FaceTime is not an app, either. It's accessed by tapping the FaceTime button when you are in the contacts app and have selected a contact. This can also be done from the Phone app under the Contacts tab, or during a call, you can switch to FaceTime.
Let me know what other apps/features you are missing.

Will not start on New Install. Opening goes straight to Crash reporter

Will not start on New Install. Clicking on icon does not open a window and goes straight to Crash reporter. I cannot access a window to try to open in safe mode (unless there is another method than outlined in the help article).
I run Windows XP and trying to install the latest 15.0.1 version. Before install, I did disable my Symantic virus protection. I have never used Firefox and would like to try it, but I'm having little success so far to even get started.
Please let me know if anyone has any other ideas or need more information from me.

hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]
edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll

I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

Go to Apple Menu > App Store > View my account > sign in and then edit the payment details with the new card details.
I am assuming that your card and supporting bank are in the same country as your residential (billing) address and that you are using the App Store of that country.

Change vendor evaluation with new scores for automatic criteria

Hi,
I would like to delete actual vendor evaluations and revaluate my vendors with new scores for the automatic criteria on time delivery.
Using the program RMEVALDL doesn't work.
Does somebody have a suggestion please ??
Thanks in advance,
Kind regards

hi,
Points scores for automatic subcriteria: The intervals for the automatic subcriteria used must be maintained, otherwise nonsensical scores may result. In addition to the F1 documentation, you should take account of SAP Note 51054. The limit values -99.9% and 99.9% must be maintained. Similarly, the invisible limit 0 must be observed.
Variance             Score
-99.9%               1
+99.9%              100
A variance of 0% brings the vendor 100 points, whereas a variance of -1% results in a score of 1 point.
check the following link.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/KnowledgePaperVendor+Evaluation
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
regards
sumit simran

When is Apple coming out with new software for ipad 2?

When is Apple coming out with new software for ipad 2

varjak paw wrote:
Perhaps if you start a thread detailing the problems you're having, someone can help you sort them out now rather than you waiting for some future update which may or may not address your issues.
Regards.
Like this one:
https://discussions.apple.com/thread/3390134
The Music app is ridiculously messed up ... if you use it enough, you will come across these issues which can only be addressed by an iOS update.

Adobe Scout issue: not starting a new session for loaded SWFs

We have an issue with Adobe Scout. It does not listen (doesn't start a new session like it sould) for a SWF loaded by another (main) SWF. The SWFs have advanced telemetry enabled and the setup is correct as described inhttp://www.adobe.com/devnet/scout/articles/adobe-scout-getting-started .html. Please help
Thank you
I am using Win 7 64-bit, the latest versions of Adobe Scout and Flash Player, Chrome 32 / IE 11.
Also I have made sure that the Scout server is listening, as descibed in the article linked above: Verify that the Scout server listening. Open Scout, and then type localhost:7934 into your web browser. It should respond quickly with "server dropped connection", "no data received", or something similar (since Scout is not an HTTP server). Scout should show the error message "can't start a session because the telemetry data isn't valid". If the browser stalls for a long time, and then comes back with "server not found" or something similar, then the socket isn't working.

The correct answer is here: http://stackoverflow.com/questions/21827477/adobe-scout-is-not-starting-a-new-session-for- loaded-swfs

Need wireless monochrome laser printer for home office to use with new mac book pro with retina display. I also have to have networking capability. Suggestions for economic printers?

HI, I need to buy an economic monochrome laser that will work wirelessly with new Mac Book Pro with Retina Display inmy home office. Any suggestions? I was considering the HP 1102W or Brothers HL22700W but have heard that they do not work with Mac 10.6.1 or upgrade. Need to try to get his done asap so I will appreciate any and all feedback!

http://www.shopping.hp.com/en_US/home-office/-/products/Printers/Printers

Hi- Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7.

Hi- My Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7 yesterday. My phone is dead and wouldnt power up ..have tried resetting using itunes but i doesnt detect the phone and..pressing sleep/home button doesnt do anything

Update
I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

I do NOT like the new update for iphone (7.1). Is there a way to go back?

I do NOT like the new update for iphone (7.1). Is there a way to go back? Every time I see a change, I think the old version is better. Especially the phone and caps. Is it possible?

Sorry... Apple does not support the Downgrading of iOS.
Jasper414 wrote:
Every time I see a change, I think the old version is better.
Give it a few days...

Out of Band Management with new routers (1941 & 2921) IOS 15.0

Hi,
Our out of band connections with the new routers (1941 & 2921) with the new IOS 15.0 are not working.
Any suggestion would be helpful.
Here is our configs:
Router:
line aux 0
exec-timeout 3 0
modem InOut
transport input all
stopbits 1
Modem(D-Link):
at&fs0=1s2=127s37=9e1q1&c1&d2&s1&k0&r0&w
Here is an output of the debug command:
*May 17 05:02:14.206 UTC: TTY1: CTS went down on IDLE line
*May 17 05:02:17.206 UTC: TTY1: CTS came up on IDLE line
*May 17 05:02:22.206 UTC: TTY1: CTS went down on IDLE line
*May 17 05:02:25.206 UTC: TTY1: DSR came up
*May 17 05:02:25.206 UTC: tty1: Modem: IDLE->(unknown)
*May 17 05:02:25.206 UTC: TTY1: EXEC creation
*May 17 05:02:25.206 UTC: TTY1: create timer type 1, 30 seconds
*May 17 05:02:25.674 UTC: TTY1: create timer type 10, 30 seconds
*May 17 05:02:26.154 UTC: TTY1: pause timer type 10 (OK)
*May 17 05:02:26.154 UTC: TTY1: resume timer type 10 (OK)
*May 17 05:02:26.174 UTC: TTY1: pause timer type 10 (OK)
*May 17 05:02:26.206 UTC: TTY1: DSR was dropped
*May 17 05:02:26.206 UTC: TTY1: Set DTR to 0
*May 17 05:02:26.206 UTC: TTY1: Quickly dropping DTR
*May 17 05:02:26.206 UTC: tty1: Modem: READY->HASPROC
*May 17 05:02:30.174 UTC: TTY1: resume timer type 10 (OK)
*May 17 05:02:30.174 UTC: TTY1: pause timer type 10 (OK)
*May 17 05:02:32.174 UTC: TTY1: Line reset by "Exec"
*May 17 05:02:32.174 UTC: TTY1: Modem: HASPROC->HANGUP
*May 17 05:02:32.174 UTC: TTY1: no timer type 0 to destroy
*May 17 05:02:32.174 UTC: TTY1: destroy timer type 1
*May 17 05:02:32.174 UTC: TTY1: no timer type 3 to destroy
*May 17 05:02:32.174 UTC: TTY1: no timer type 4 to destroy
*May 17 05:02:32.174 UTC: TTY1: destroy timer type 10
*May 17 05:02:32.174 UTC: TTY1: no timer type 2 to destroy
*May 17 05:02:32.230 UTC: TTY1: dropping DTR, hanging up
*May 17 05:02:32.230 UTC: TTY1: Set DTR to 0
*May 17 05:02:32.230 UTC: tty1: Modem: HANGUP->(unknown)
*May 17 05:02:32.230 UTC: TTY1: cleanup pending. Delaying DTR
*May 17 05:02:34.230 UTC: TTY1: restoring DTR
*May 17 05:02:34.230 UTC: TTY1: Set DTR to 1
*May 17 05:02:35.230 UTC: TTY1: CTS came up on IDLE line
It goes into the handshake but then disconnects immediately.
Thanks in advance,

tray cable with this scheme of pin connector
RJ45 DB9
1 7
2 4
3 3
4 5
5 5
6 2
7 1
8 8
init string at&F1S0=1

When Apple solve problems with new iTunes calendar sync with windows and outlook?

When Apple solve problems with new iTunes calendar sync with windows and outlook?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
More Info here...
Apple ID FAQs > http://support.apple.com/kb/HT5622
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Register new listener for newDB(with new Home) in existing 10.2.0.2 cluster

Dear Friends,
UAT Instance:
i have installed 10g cluster (10.2.0.2) and i have cretaed new 10g home and cretaed listener (with port ) and cretaed UAT database
No issues on the above
DEV Instance:
Now we have another database DEV and for this i have differnt oracle home (not same as UAT) and i created databases and converted to RAC but i want this database to be registered in the 10g existing cluster and the listener also i want to have new one with different port (not same as UAT)
so when we try to cretae new listener from new DB home it's throwing error.
"CRS-0215: could not start resource"
so please let me know how to
creating new listener with different port for new database having new DB home
and register it with the existing 10g cluster
Regards,
DB

Hi,
Is the database part of the cluster or not?
srvctl config database -d ... to find out if not add it to cluster
srvctl add database -d and then the instances
srvctl add instance -d dbname -i instance name
have a look in here for information related to listener/port
Changing Default Listener Port Number [ID 359277.1]
How to Create Multiple Oracle Listeners and Multiple Listener Addresses [ID 232010.1]

Installing OS on a new HDD for imac with no installed HDD

Hi all
I am looking to buy an iMac 27", but it doesnt come with a HDD
So I wanted to know if I buy a new HDD for it, can I install Mavericks onto it and fit it to the iMac? How would I go about doing this?
I dont have access to another mac but I do have access to a windows machine. Can I do it from there?
Any help appreciated
Thanks

Where are you buying an iMac 27-inch, Late 2009 model that has no internal hard disk drive?
Having to assume it was removed by an original owner, does the computer work? Was it tested by use of an externally enclosed HDD with a correct bootable system installed?
There are various repair and upgrade guides online, several topics among them and several are free to view or use. There likely is an iFixit guide that may cover that vintage of iMac 27-inch build year model.
Not sure which iMac 27-inch model guide applies to your computer,
some appear here http://www.ifixit.com/Device/iMac_Intel
While considering the hard disk drive, be sure that if there are any sensors or special cables required to be in place and attached to a new replacement, they are in place and working; some users of later models found when a hard disk drive was replaced, their fans ran at high and uncontrolled speeds due to lack of sensor input. The default situation was for the computer act as though the unit was overheated. And third party fan control software to set a fan at low slower speeds does not take into account faster speeds are needed to cool iMacs. Yours may not exhibit this issue, but I am not certain either way.
When you get it set up, with HDD and original Snow Leopard installed & updated to 10.6.8, be sure to check to see if there are any hardware or firmware updates. I see there was one listed for your model and it may already be installed...
•27-inch iMac EFI FW Update 1.0:
http://support.apple.com/kb/DL1031
Hopefully this helps...
Good luck & happy computing!

SCCP 8945 not registering with new instal for 2921 with CME 10.0

Similar Messages

Maybe you are looking for