Sccp phones unregistred

Hi all
I am upload 7937 firmware in telephony-service and recreate cnf files .
After that when restart the SCCP phones they can't registred in CME but receive DHCP IP addresses and CME IP .
I execute no load 7937 firmware and perform no cre cnf , cre cnf in telephony-service but its not helps me. Phones who not restarted working fine
sh telephony-service
CONFIG (Version=10.5)
=====================
Version 10.5
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
protocol mode default
ip source-address IP port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
load 7916-24 cmterm-7916.1-0-4-2.cop.sgn
load 7965 SCCP45.9-4-2-1S
load 6921 SCCP69xx.9-2-1-0
max-ephones 35
max-dn 50
max-conferences 4 gain 6
dspfarm units 1
dspfarm transcode sessions 0
dspfarm 1 confprof1
conference hardware
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
cnf-file location: flash:
cnf-file option: PER-PHONE
network-locale[0] RU (This is the default network locale for this box)
network-locale[1] RU
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] RU (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
moh music-on-hold.au
time-format 24
date-format dd-mm-yy
timezone 32 Russian Standard/Daylight Time
call-forward pattern .T
transfer-pattern .T
keepalive 180 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message
web admin system name
web admin customer name Customer
edit DN through Web: enabled.
edit TIME through web: enabled.
background save interval 10 minutes
Log (table parameters):
max-size: 150
retain-timer: 15
create cnf-files version-stamp Jan 01 2002 00:00:00
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
Call List BLF is enabled
shutdown

I perform that
Router#configuration terminal
Router(config)#no logging console
Router(config)#no logging monitor
Router(config)#service timestamps debug datetime msec
Router(config)#logging buffered 40960 debugging
Router(config)#service sequence
Router(config)#no logging rate-limit
Router(config)#exit
debug tftp events
debug ephone detail
debug ephone register
In telephony-service i recreate cnf files and have this output :
Creating CNF files
IP address required is
TCP port required is 2000
read -1 bytes from flash:/its/SEPDEFAULT.cnf file
A0
0 item(s) of type 0
Unrecognized type 0 or format
Creating new SEPDEFAULT.cnf file size 58
58 bytes written OK..
ephone add http binding flash:/its/russia_lddefault.cfg failed
ephone add http binding flash:/its/russia_gkdefault.cfg failed
ephone add http binding flash:/its/russia_ffdefault.cfg failed
ephone add http binding flash:/its/united_states_lddefault.cfg failed
ephone add http binding flash:/its/united_states_gkdefault.cfg failed
ephone add http binding flash:/its/united_states_ffdefault.cfg failed
Just few seconds and i paste log
for DN 3 chan 1 to state CALL_END
009627: Mar 5 14:48:03.437: ephone-3[2/7]:UpdateCallState DN 3 chan 1 state 10 calleddn -1 chan 1
009628: Mar 5 14:48:03.437: ephone-3[2/7]:Binding ephone-3 to DN 3 chan 1 s2s:0
009629: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:Set FAC enabled (0) and dial mode (4)
009630: Mar 5 14:48:03.437: DN 3 chan 1 End Voice_Mode
009631: Mar 5 14:48:03.437: SkinnyGetCallState for DN 3 chan 1 IDLE
009632: Mar 5 14:48:03.437: called DN -1 chan 1, calling DN -1 chan 1 phone 3 incoming s2s:0
009633: Mar 5 14:48:03.437: ephone-3[2/7]:SkinnyStopMedia: normal line=1 dn=3 ch=1
009634: Mar 5 14:48:03.437: ephone-3[2/7]:SkinnyStopMedia: CloseReceive sent: normal confID=6 ref=1120
009635: Mar 5 14:48:03.437: SkinnyGetCallState for DN 3 chan 1 IDLE
009636: Mar 5 14:48:03.437: called DN -1 chan 1, calling DN -1 chan 1 phone 3 incoming s2s:0
009637: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:SkinnyStopMedia: Multimedia not active
009638: Mar 5 14:48:03.437: ephone-3[2/7]:SkinnyStopMedia: StopMedia sent: normal confID=6 ref=1120
009639: Mar 5 14:48:03.437: SkinnyGetCallState for DN 3 chan 1 IDLE
009640: Mar 5 14:48:03.437: called DN -1 chan 1, calling DN -1 chan 1 phone 3 incoming s2s:0
009641: Mar 5 14:48:03.437: ephone-3[2/7]:SpeakerPhoneOnHook
009642: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:Clean up activeline 1
009643: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:UpdateCallState unbind phone from DN 3
009644: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:ClearCallPrompt line 0 ref 0
009645: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:SkinnyCheckPendingCallBackPhone scan 2 lines
009646: Mar 5 14:48:03.437: ephone-3[2/7]:SelectPhoneSoftKeys set 0 mask FFBF for line 0 ref 0
009647: Mar 5 14:48:03.437: SkinnySetCallInfoName calling dn -1 chan 1 dn 3 chan 1,calling [] called []
009648: Mar 5 14:48:03.437: SetCallInfo DN 3 chan 1 is not skinny-to-skinny
009649: Mar 5 14:48:03.437: SkinnyStopDnRecallTimer: dn 3 chan 1
009650: Mar 5 14:48:03.437: Skinny Call State change for DN 3 chan 1 CALL_END from CONNECTED
009651: Mar 5 14:48:03.437: ephone-(3) DN 3 chan 1 calledDn -1 chan 1 callingDn -1 chan 1 :: port=0 incoming
009652: Mar 5 14:48:03.437: SkinnyUpdateCstate DN 3 chan 1 cstate 2
009653: Mar 5 14:48:03.437: SkinnyGetCallState for DN 3 chan 1 IDLE
009654: Mar 5 14:48:03.437: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009655: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:SkinnyUpdateCstate first phone for DN 3 chan 1 ref 1120
009656: Mar 5 14:48:03.437: ephone-3[2/7][SEP20BBC01F9387]:UpdateCState found DN 3 on line 1
009657: Mar 5 14:48:03.437: ephone-3[2/7]:SkinnyUpdateCState process cstate 2 for inactive DN 3 chan 1 line 1 (activeLine=0 whisperLine=0)
009658: Mar 5 14:48:03.437: ephone-3[2/7]:SkinnyUpdateCstate inactive (overlay) line 1 for DN 3 ref 1120 combo=0
009659: Mar 5 14:48:03.437: DN 3 chan 1 ephone-3 state set to 2
009660: Mar 5 14:48:03.437: SkinnyGetCallState for DN 3 chan 1 IDLE
009661: Mar 5 14:48:03.437: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009662: Mar 5 14:48:03.437: ephone-3[7]:SetCallState line 1 DN 3(3) chan 1 ref 1120 TsOnHook
009663: Mar 5 14:48:03.441: ephone-3[2/7]:SkinnyTrackActiveCall for line 1 ref 1120 state 2 (slot 0)
009664: Mar 5 14:48:03.441: ephone-3[2/7]:SelectPhoneSoftKeys set 0 mask FFBF for line 1 ref 1120
009665: Mar 5 14:48:03.441: SkinnyGetCallState for DN 3 chan 1 IDLE
009666: Mar 5 14:48:03.441: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009667: Mar 5 14:48:03.441: SkinnyGetCallState for DN 3 chan 1 IDLE
009668: Mar 5 14:48:03.441: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009669: Mar 5 14:48:03.441: ephone-3[2/7]:Clean Up Speakerphone state
009670: Mar 5 14:48:03.441: ephone-3[2/7]:SpeakerPhoneOnHook
009671: Mar 5 14:48:03.441: ephone-3[2/7]:Speaker is not on, SpeakerPhoneOnHook suppressed
009672: Mar 5 14:48:03.441: ephone-3[2/7][SEP20BBC01F9387]:SkinnyGetToneRef toneRef 0x0 callRef 0x460
009673: Mar 5 14:48:03.441: ephone-3[2/7]:SkinnyPhoneToneDirect: StopTone sent: normal line=1 ref=1120 tone=0x0
009674: Mar 5 14:48:03.441: Skinny StopTone sent on ephone socket [7]
009675: Mar 5 14:48:03.441: SkinnyGetCallState for DN 3 chan 1 IDLE
009676: Mar 5 14:48:03.441: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009677: Mar 5 14:48:03.441: ephone-3[2/7]:SelectPhoneSoftKeys set 0 mask FFBF for line 0 ref 0
009678: Mar 5 14:48:03.441: SkinnyGetCallState for DN 3 chan 1 IDLE
009679: Mar 5 14:48:03.441: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009680: Mar 5 14:48:03.441: ephone-3[7]:SetLineLamp 1 to OFF
009681: Mar 5 14:48:03.441: UnBinding ephone-3 from DN 3 chan 1
009682: Mar 5 14:48:03.441: ephone-3[2/7]:---SkinnySyncPhoneDnOverlays is onhook
009683: Mar 5 14:48:03.441: SkinnyGetCallState for DN 3 chan 1 IDLE
009684: Mar 5 14:48:03.441: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009685: Mar 5 14:48:03.441: ephone-3[2/7][SEP20BBC01F9387]:SkinnyArmPhoneCallbacks scan 2 lines
009686: Mar 5 14:48:03.441: ephone-3[2/7][SEP20BBC01F9387]:ClearCallPrompt line 0 ref 0
009687: Mar 5 14:48:03.441: ephone-3[2/7][SEP20BBC01F9387]:SkinnyCheckPendingCallBackPhone scan 2 lines
009688: Mar 5 14:48:03.441: SkinnyGetCallState for DN 3 chan 1 IDLE
009689: Mar 5 14:48:03.441: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009690: Mar 5 14:48:03.441: SkinnyReportDnState for overlay DN 3 chan 1 on ephone-1
009691: Mar 5 14:48:03.441: SkinnyReportDnState DN 3 chan 1 ONHOOK
009692: Mar 5 14:48:03.441: ephone-3[2/7]:SkinnyConfirmOnHookAck: dn 3 chan 1 dn_index 3 phone=2, pickupOnHook=0
009693: Mar 5 14:48:03.441: ephone-3[2/7][SEP20BBC01F9387]:ClearCallPrompt line 0 ref 0
009694: Mar 5 14:48:03.441: ephone-3[2/7][SEP20BBC01F9387]:SkinnyCheckPendingCallBackPhone scan 2 lines
009695: Mar 5 14:48:03.445: dn_tone_control DN=3 chan 1 tonetype=0:DtSilence onoff=0 pid=418
009696: Mar 5 14:48:03.445: SkinnyGetCallState for DN 3 chan 1 IDLE
009697: Mar 5 14:48:03.445: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009698: Mar 5 14:48:03.445: ephone-3[2/7]:Check toneOn state for last_phone
009699: Mar 5 14:48:03.445: SkinnyGetCallState for DN 3 chan 1 IDLE
009700: Mar 5 14:48:03.445: called DN -1 chan 1, calling DN -1 chan 1 phone -1 incoming s2s:0
009701: Mar 5 14:48:03.665: ephone-3[2/7][SEP20BBC01F9387]:Update Stats Total for DN 3 chan 1
009702: Mar 5 14:48:03.761: ephone-3[2/7][SEP20BBC01F9387]:MediaPathEventMessage Handset OFF
009703: Mar 5 14:48:03.761: ephone-3[2/7]:MediaPathEventMessage

Similar Messages

Building CME with SIP vs. SCCP Phones

We currently have 4 CME Systems with SCCP phones. Recently, it was discuss by our upper management to start using SIP phones. Right now the system I have configured are using a PRI for dialtone with POTS lines for backup. What needs to different on the config to use SIP? Do I replace the 'telephony-service' and current 'dial-peers' or add to them?
This is all new to me and I still have not been able to attend any formal training.
Would there ever be a reason to use SIP and SCCP phones on the same system and would that even work?
Any help is appreciated!

Aha.... that's a different question.
The choice of your trunking protocol (PRI versus SIP versus something else like FXO/analogue) is largely independent of the protocol the handsets use. You can use SCCP for your handsets and then use SIP trunking into a provider for your external calls. The CME Router will handle the signalling translation between SCCP and SIP for you.
Like everyone else here, I would always use SCCP for the handsets. Whilst Cisco are improving SIP handset features all the time between releases you still can't do everything you that you can do with SCCP. You would also need version 15 to support some of the more useful SIP handset stuff including Extension Mobility, and my own personal view of the code quality on the version 15 trains would use such language that it can't be mentioned here.
SCCP to the handset and trunking over SIP is perfectly valid and I've used it many times with great success.
Hope this helps. Barry

How do i monitor SIP Phone from a SCCP Phone? UC500

Hello Community.
This is my SIP Phone config:
voice register dn 2
number 214
name xxx
no-reg
label xxx
voice register pool 2
id mac 44E4.D944.9B11
session-transport tcp
type 9971
number 1 dn 2
number 2 dn 3
dtmf-relay rtp-nte
username xxx password xxx
codec g711ulaw
And this is the SCCP Phone:
ephone 12
device-security-mode none
mac-address 0011.2014.8248
ephone-template 16
username xxx password xxx
type 7960 addon 1 7914
button 1:12 2:51 8m11 9m10
button 10m15 11m13 12m16 13m17
button 14m18
Hope you can help, thanks Patrick

Yes you can.
Sample config :
sip-ua
          presence enable
     presence
          presence call-list
          max-subscription 64
          watcher all
          allow subscribe
     ephone-dn 12
          number 2010
          allow watch
          blf-speed-dial 1 214 label "Teset-User"
     voice register dn 2
          number 214
          allow watch
CME admin guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1011193
Please rate replies and mark question as "answered" if applicable.

'voice-class codec' for SCCP phones (CME)?

Hi, with SIP phones it's possible to apply a codec voice class.
Let's say I have the following voice class:
voice class codec 1
codec preference 1 g722-64
codec preference 2 g711alaw
I can apply it for SIP phones, e.g. for pool 9:
voice register pool 9
voice-class codec 1
With SCCP phones, I can only set one codec with the 'codec' command under ephone.
My goal is to use 'codec transparent' in the dial peer and to let the phone itself negotiate the codec. How can I do this with SCCP phones?
For example, if I use 'codec transparent' in the dial-peer and someone (who doesn't support g722) calls me, then the SIP phone negotiates g711alaw with the other side and no transcoding is needed. This is what I also want for my SCCP phones. Am I missing a command?
I'm using CME 8.6

The syntax for SCCP phones is the same. Just apply the class to the VoIP dial peers.
dial-peer voice 100 voip
tone ringback alert-no-PI
description For InBound VoIP
modem passthrough nse codec g711ulaw
voice-class codec 1 <<<<<
voice-class h323 1
incoming called-number .
fax rate disable
no vad
Please rate helpful answers!

CME Sccp phones

Hello,
I have 7942 phones and they are registered on the CME router, but i see the attached logs in debug,so i am worried why that so ????, one of my colleague also receiving the same logs on his router but his 7942 phones are not registering.
thanks

Dear Chris,
the logs seen are when the phone is connected to the network and it is trying to update English_United_States/mk-sccp.jar file and then reset himself and boots again then it try to find the ctl,itl files where the error are seen 09:18:19: TFTP: Sending error 1 No such file,
thanks

Ringing external ringer simultaneously w/ CME SCCP phones

I'm looking for a way to ring an external ringer simultaneously with multiple IP phones. Currently these phones configured with overlay of all instances of extension 9944. I don't think the customer would accept ringing the ringer and then CFNA to phones or any other linear/sequential setup.
As I see it using a hunt group will not help since they can only be sequential, peer, or longest-idle. My customer didn't accept any of these setups I've done for them so I resorted to overlaying multiple instances of the main number to the IP phones. This was acceptable but now the external ringer has been introduced to the equation.
I don't yet know if I'll be using an FXS card or an ATA for the ringer. Most likely it will be an FXS card though.

My overlays on my ATA are working fine...I guess I didn't expect the ATA to be able to overlay.
Not sure I understand where the 7940 comes into the equation in your comment. Of course IP phones can hand off network connectivity to PCs...are you saying you have a setup like:
switch --> 7940 --> ATA
with a working 7940 and a working ATA?

Can UC560 support the most current SCCP phone loads?

I have a UC560 that I recently upgraded to Software Pack 8.6(2).
The default phone loads from this software pack, are different than what's currently available to download from CCO, for certain phone models.
For example, the Cisco SPA508G firmware load that comes with SW Pack 8.6(2) is 7.5.2c. However, the most current firmware load available from CCO is 7.5.5 (released 6/14/2013).
Can I upload the latest phone load zip file from CCO, to the UC560? Or is UC560 only supported with the firmware loads that come with the software pack?

Hello,
You can run the new phone loads with the current software pack. Generally, I would only advise doing that if you are running into a specific issue/new feature that requires an upgrade first.
Thanks,
-john

Setup Hotline Analog Phone with SCCP

Anyone out there can help me out how to setup a hotline in CUCM 8.6?
I've followed this procedure below, but I'm still getting an error message when I lift the handset such as "your dial cannot be completed...".
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml
Just in a nutshell, here is what I've done:
Extension: 1111 PLAR Analog SCCP Phone with: CSS_Hotdial and PT_Allowed (line settings)
TP: blank, PT_Hotdial and CSS_Hotdial, and called PTM: 2222
Extension: 2222 CSS_Allowed, and PT_Allowed - no changes on this extension...
Added the PT_Allowed into CSS_Hotdial. The order is: PT_Hotdial/PT_Allowed
Both lines are on the same VG204-vg20x-ipvoice-mz.124-22.T5.bin. When I selected hotline feature it says is supported Analog Phone SCCP, but I did not see the VG. It looks like is not supported hotline on VGs. Can someone confirm that?
Am I missing something? Do I need to enable something under Service/Enterprise parameters?
Thank you!

Chris, thanks for your prompt help.
I thought the TP needs a CSS with access to the 1111 DN, not to the 2222. Because when someone lifts the handset on phone 1111 this phone should invoke the TP which translate and ring to the 2222 phone. Thus, I put this CSS_Hotdial on phone 1111 under line.
And my TP looks like this: PT_Hotdial and CSS_Hotdial, and called party transformation mask 2222
The CSS_Hotdial has only access to one PT_Hotdial.
Also the two phones 1111 and 2222 are on the same partition PT_Allowed, but they are on different CSS.
Anyway I also tried what you said but did not work. Are you sure this hotline works on VG204? I think it is not working because this feature is not supported on VG204 nor in any VG model.
If you are sure it should work. Could you please elaborate more this solution with PT/CSS/TP?
Once again thanks

SIP Phones Vs SCCP

So,
i know this may too basic a question but why would someone want to convert an SCCP phone to SIP? whats the added functionality/Advantages for SIP. say i have 100 phones on SCCP and i convert all to SIP. what would i notice?
Note: this is NOT an actual scenario, just was checking out some documentation so i thought id ask
thanks

hi guys
i just wanna add to ur interesting discussion that
When you use Cisco IP phones with SIP, the number of features depends on the phone models.
Type A phones (Cisco Unified IP Phones 7905, 7912, 7940, and 7960) support fewer features
and have a different look and feel when used with SIP.
In summary, endpoints using standard SIP or H.323 support fewer telephony features, and type
A Cisco IP phones have some limitations when using SIP
thank you
if helpful Rate

Cisco SIP Phone 9971 won't register on CME 8.6 or 8.5 Please HELP

Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.
I configured CME for SIP clients, then I add configuration for 9971 phone and create profiles. Phone downloaded SEP...xml file from CME,after that phone look for g4-tones.xml and gd-sip.jar files, I added them to CME after that phone downloaded them and reboot. Now phone is stuck in some kind of loop and does not register on CME.
On phone log I can see repeting next few messeges.
12:01:58a No DNS Server IP
12:01:59a Updating Trust list
12:01:59a No Trust List instaled
12:01:59a SEP04C5AB03B0D.cnf.xml (TFTP) // at this time phone download SEP...xml file from CME
12:02:00a VPN Error: VPN is not Configured
on CME if issue DEBUG TFTP EVENTS i receive next few lines
*Aug 18 18:20:19.891: TFTP: Looking for CTLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:19.987: TFTP: Looking for ITLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:20.083: TFTP: Looking for ITLFile.tlv
*Aug 18 18:20:20.347: TFTP: Looking for SEP04C5A4B03B0D.cnf.xml
*Aug 18 18:20:20.351: TFTP: Opened flash:/SEP04C5A4B03B0D.cnf.xml, fd 14, size 4585 for process 141
*Aug 18 18:20:20.363: TFTP: Finished flash:/SEP04C5A4B03B0D.cnf.xml, time 00:00:00 for process 141
here you can see verison info of CME
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 15:31 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
ELTOSAN_ROUTER uptime is 1 hour, 50 minutes
System returned to ROM by reload at 16:29:20 UTC Thu Aug 18 2011
System image file is "flash:/c2900-universalk9-mz.SPA.151-4.M.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO2901/K9 (revision 1.0) with 471040K/53248K bytes of memory.
Processor board ID FGL1508252Y
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
   Survivable Remote Site Voicemail (SRSV) on Cisco Unity Express (CUE) 8.5.1 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2901/K9          xxxxxxxxxxxxx
Technology Package License Information for Module:'c2900'
Technology    Technology-package          Technology-package
              Current       Type          Next reboot
ipbase        ipbasek9      Permanent     ipbasek9
security      securityk9    Permanent     securityk9
uc            uck9          Permanent     uck9
data          None          None          None
Configuration register is 0x2102
this is RUNNING CONFIGURATION
! Last configuration change at 16:10:12 UTC Thu Aug 18 2011
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ELTOSAN_ROUTER
boot-start-marker
boot system flash:/c2900-universalk9-mz.SPA.151-4.M.bin
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
no ip routing
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.5.1 192.168.5.10
ip dhcp excluded-address 192.168.5.200 192.168.5.255
ip dhcp pool phone
   network 192.168.5.0 255.255.255.0
   default-router 192.168.5.251
   option 150 ip 192.168.5.251
ip dhcp pool data
   relay source 192.168.2.0 255.255.255.0
   relay destination 192.168.2.201
multilink bundle-name authenticated
crypto pki token default removal timeout 0
voice-card 0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol pass-through g711alaw
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 192.168.5.251 port 5060
max-dn 6
max-pool 6
load 9971 sip9971.9-1-1SR1.loads
authenticate register
tftp-path flash:
create profile sync 0005135312289902
voice register dn 1
number 207
allow watch
name GossaVM
label 207
voice register dn 3
number 101
name Dejan
label 101
mwi
voice register pool 1
id mac 000C.29C5.0011
number 1 dn 1
dtmf-relay sip-notify
username testvm password testera
codec g711alaw
voice register pool 3
id mac 04C5.A4B0.3B0D
type 9971
number 3 dn 3
presence call-list
dtmf-relay rtp-nte
username dejan password 1234
codec g711alaw
no vad
license udi pid CISCO2901/K9 sn xxxxxxxxxxxx
hw-module ism 0
hw-module pvdm 0/0
redundancy
interface GigabitEthernet0/0
description INTERFACE INTERNAL
no ip address
no ip route-cache
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/0.2
description LAN DATA
encapsulation dot1Q 2
ip address 192.168.2.251 255.255.255.0
no ip route-cache
interface GigabitEthernet0/0.5
description LAN VOICE
encapsulation dot1Q 5
ip address 192.168.5.251 255.255.255.0
no ip route-cache
interface ISM0/0
no ip address
no ip route-cache
shutdown
!Application: SRSV-CUE Running on ISM
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
interface ISM0/1
description Internal switch interface connected to Internal Service Module
shutdown
interface Vlan1
no ip address
no ip route-cache
shutdown
ip forward-protocol nd
no ip http server
no ip http secure-server
snmp-server community public RO
tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads
tftp-server flash:United_States/g4-tones.xml
tftp-server flash:English_United_States/gd-sip.jar
control-plane
voice-port 0/0/0
voice-port 0/0/1
voice-port 0/0/2
voice-port 0/0/3
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password jebiga
login
transport input all
end
I did not have any kind of problem with X-LITE to register to CME. also try with few SCCP phones 7940 and I did not any kind of problem .
this is content of SEP....xml file for 9971
<device>
<deviceProtocol>SIP</deviceProtocol>
<devicePool>
<dateTimeSetting>
<dateTemplate>M/D/YA</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp priority="0">
<name>0.0.0.0</name>
<ntpMode>unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<sipPort>5060</sipPort>
</ports>
<processNodeName>192.168.5.251</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<localCfwdEnable>true</localCfwdEnable>
<callForwardURI>service-uri-cfwdall</callForwardURI>
<callPickupURI>service-uri-pickup</callPickupURI>
<callPickupGroupURI>service-uri-gpickup</callPickupGroupURI>
<callHoldRingback>2</callHoldRingback>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>2</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<remotePartyID>true</remotePartyID>
</sipStack>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel></featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name></name>
<displayName></displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="2" lineIndex="2">
<featureID>9</featureID>
<featureLabel>101</featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name>101</name>
<displayName>Dejan Rakic</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<enableVad>true</enableVad>
<preferredCodec>g711alaw</preferredCodec>
<dialTemplate></dialTemplate>
<kpml>1</kpml>
<phoneLabel></phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
</sipProfile>
<commonProfile>
<phonePassword>1234</phonePassword>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
<loadInformation>sip9971.9-1-1SR1.loads</loadInformation>
<vendorConfig>
</vendorConfig>
<commonConfig>
<videoCapability>0</videoCapability>
<ciscoCamera>0</ciscoCamera>
</commonConfig>
<sshUserId>dejan</sshUserId>
<sshPassword>1234</sshPassword>
<userId></userId>
<phoneServices>
<provisioning>2</provisioning>
<phoneService type="1" category="0">
<name>Missed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/MissedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Received Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/ReceivedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Placed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/PlacedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="2" category="0">
<name>Voicemail</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/Voicemail</url>
<vendor></vendor>
<version></version>
</phoneService>
</phoneServices>
<versionStamp>0131511014412102</versionStamp>
<userLocale>
<name>English_United_States</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
</networkLocaleInfo>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<servicesURL>http://192.168.5.251:80/CMEserverForPhone/serviceurl</servicesURL>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
</device>

Hello,
I'm facing exactly the same problem, that is:
a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
I have read all the postings to this Forum, but I have not been able to solve it.
In my case the commands voice register dn and voice register pool are OK.
So frankly, I have no idea what I could be missing.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811#

Is it possible to use SCCP and SIP at the same time?

Our CCM is using v9.1 and all of our phones are SCCP. We are looking at a conference room phone that runs SIP. Would it be possible to use this in our current setup?

Hi @bobdchambers,
That's totally fine. They both co-exist in the same environment but make sure to not configure the same extension in different models because if you dial an extension that is configured in a SCCP phone and a SIP phone, just the SCCP phone rings.
HTH.
Rgrds,
Martin, IT Specialist

CUCM 8.6 Dropped call transfers involving SIP phones

Hi All,
I am a developer who has been tasked with figuring out why call transfers are being dropped by Cisco CUCM when the original call comes from a SIP phone. This scenario works:
Cisco phone calls another Cisco phone, which transfers the original call to a SIP phone
These scenarios do not work:
SIP phone calls Cisco phone, which transfers the original call to another Cisco phone
SIP phone calls Cisco phone, which transfers the original call to another SIP phone
I have researched the Call Manager traces to the best of my ability, and I see some info in there that could potentially point to the source of the problem. I am just unable to understand what the trace means:
10:23:08.672 |//SIP/SIPCdpc(1,74,2342)/ci=24377698/ccbId=175645/scbId=0/active_CcDisconnReq: ccDisconnReq.onBehalfOf=Media : ccDisconnReq.s.sv=2 : ccDisconnReq.c.cv=47 |1,100,63,1.93259^10.10.10.85^*
10:23:08.672 |//SIP/Stack/Info/0x0/sipConstructContainerContext #### Created container=0xb0b42f58|1,100,71,1.1^*^*
10:23:08.672 |//SIP/SIPCdpc(1,74,2342)/ci=24377698/ccbId=175645/scbId=0/appendReasonHdr: appendReasonHdr - Invalid Disconnect Cause(cause=47), No Reason Header Appended|1,100,63,1.93259^10.10.10.85^*
10:23:08.672 |//SIP/SIPCdpc(1,74,2342)/ci=24377698/ccbId=175645/scbId=0/appendRPIDHdrForOriginalCalledParty: SIP device does not Support Orig Dialled Phone nego: 0|1,100,63,1.93259^10.10.10.85^*
I have been wondering whether this could be a codec issue, however the SIP phones we are using are configured with the following codecs:
G711U
G711A
G722
ILBC
GSM
and our SIP software is also set to accept the first codec offered by the remote side. It seems from the SIP client logs that G722 is being used as the codec to communicate with the Cisco phones, but perhaps I'm misinterpreting.
I have attached a CUCM trace of a call from a SIP phone (ext. 491) to a Cisco handset (ext. 170) where the Cisco handset attempts to transfer the call to another SIP phone (ext. 492). The trace snippet shown above is from this log.
I would really appreciate it if someone more experienced with VoIP/SIP/CUCM could take a look and offer any ideas on what the issue might be, and also how we might be able to address it. I can try to provide more info about our CUCM configuration if needed.
Thanks in advance!

Leslie, so here is what I found from the traces....
To understand the difference we need to understand how cucm performs call transfers from a sccp signalling point and a sip signalling point
SCCP
When the transfer key is pressed
1. CUCM sends a CloseReceiveChannel and StopMediaTransmission to the IP phone involved in active media (referenced by the callids)
NB, here CUCM updates the call state on the phone to a call state of 8 which is "Hold"
2.CUCM tells the held party to listen MOH from MOH server
3.CUCM establishes newcall leg with the intended transfered destination..Once this call is connected
4.CUCM receives a new Transfer instruction from the transferring phone to connect the held party
5..CUCM sends a CloseReceiveChannel between the held phone and MOH server (to tear down the media)
6. Next CUCM sends a CloseReceiveChannel and StopMediaTransmission to the transfering party & transfered party to remove Xferring party from call
7. finally CUCM sends OpenReceiveChannel between the original called party and the transfered party..and call is done
For SIP signalling. when the first transfer key is pressed
1. CUCM sends invite (re-invite) with an inactive SDP (a=inactive) to indicate a break in media path
2. CUCM sends a Delayed offer to insert MOH or to resume Media stream
NB: CUCM expects a sendrecv offer with SDP to the DO. (NB:if cucm gets an inactive offer SDP in the 200 OK instead of providing a send-recv offer SDP, the media path remains in an inactive state and causes calls to dropcall will drop),CUCM sends an ACK with sendonly to the 200 OK
3.CUCM establishes newcall leg with the intended transfered destination..Once this call is connected
4.CUCM receives a new Transfer instruction from the transferring phone to connect the held party
5. Next CUCM sends a re-invite with an inactive SDP to indicate a break in media path to MOH (in attempt to complete transfer)
6.Next CUCM sends an inactive SDP to indicate a break in media path between transfering party & transfered party to remove Xferring party from call
7. Next CUCM sends a DO re-invite to connect the transfered party. The far end then sends 200 OK with the required SDP to connect the call
Now having explained all of these, we need to look at where the call is failing for SIP-----SCCP----SIP calls without MTP
lets look at succesful SCCP-----SCCP-----SIP without MTP
Point 4 above
++++++++Extension 170 presses the transfer button to connect the two calls (Callid=24378483)+++++++++++++
(0003395) SoftKeyEvent softKeyEvent=4(Trnsfer) lineInstance=1 callReference=24378483
Point 5 above
++++Next CUCM closed the media between extension 160 and MOH server callid=24378480(this is the only active call on this callid)+++
(0003396) CloseReceiveChannel conferenceID=24378480 passThruPartyID=16777845. myIP: IpAddr.type:0 ipv4Addr:0x0a0a0a89(10.10.10.137)
Point 6 Above
+++++Next cucm closes the call between extension 170 and 490 callid=(24378483)++++++++
(0003395) CloseReceiveChannel conferenceID=24378483 passThruPartyID=16777847. myIP: IpAddr.type:0 ipv4Addr:0x0a0a0a8b(10.10.10.139)
(0003395) StopMediaTransmission conferenceID=24378483 passThruPartyID=16777847. myIP: IpAddr.type:0 ipv4Addr:0x0a0a0a8b(10.10.10.139)
Point 6 above for the sip side (since the destination is SIP, to tear down media to SCCP phone, so as to connect the caller to the xfered party)
+++++++Next CUCM sends a re-invite with a=inactive SDP to the sip phone ++++++++++++
//SIP/SIPTcp/wait_SdlSPISignal: Outgoing SIP TCP message to 10.10.10.104 on port 62220 index 1890
[885626,NET]
INVITE sip:[email protected]:62220;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK23332dbee978
From: ;tag=192115~d8e94532-127d-4dca-bba0-64b1675da032-24378484
o=CiscoSystemsCCM-SIP 192115 2 IN IP4 10.10.10.195
s=SIP Call
c=IN IP4 0.0.0.0
m=audio 24560 RTP/AVP 9 101
a=rtpmap:9 G722/8000
a=ptime:20
a=inactive-----------------------------------------------------Inactive
Still part of Point 6 for SIP signalling
++++++++++++Next sip phone responds with a 200 OK recevonly SDP +++++++++++++++++++
//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message from 10.10.10.104 on port 62220 index 1890 with 683 bytes:
[885628,NET]
SIP/2.0 200 OK
v=0
o=- 18077 11099 IN IP4 10.10.10.104
s=yasdjip
c=IN IP4 10.10.10.104
t=0 0
a=ptime:20
a=recvonly-------------------------------------a=recvonly
Finally Point 7 above..
+++++++++++++=Next cucm sends a DO re-invite to extension 492-sip phone++++++++++
//SIP/SIPTcp/wait_SdlSPISignal: Outgoing SIP TCP message to 10.10.10.104 on port 62220 index 1890
[885630,NET]
INVITE sip:[email protected]:62220;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK233534ffec4a
From: ;tag=192115~d8e94532-127d-4dca-bba0-64b1675da032-24378484
To: ;tag=5B0E9816C2CA6D70F3166FB972EDE4C2
+++++++Next we get a 200 OK from sip phone with sdp=sendrecv+++++++++=
/SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message from 10.10.10.104 on port 62220 index 1890 with 683 bytes:
[885634,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK233534ffec4a
Contact:
From: ;tag=192115~d8e94532-127d-4dca-bba0-64b1675da032-24378484
Call-ID: [email protected]
v=0
o=- 18077 11099 IN IP4 10.10.10.104
s=yasdjip
c=IN IP4 10.10.10.104
t=0 0
m=audio 16574 RTP/AVP 9 101
a=rtpmap:101 TELEPHONE-EVENT/8000
a=fmtp:101 0-15
a=ptime:20
a=sendrecv
+Now CUCM sends an OpenReceiveChannel and start media xmission to sccp phone (callid=24378480) with media parameters of sip phone++++++
(0003396) OpenReceiveChannel conferenceID=24378480 passThruPartyID=16777848 millisecondPacketSize=20 compressionType=6(Media_Payload_G722_64k) RFC2833PayloadType=101 qualifierIn=? sourceIpAddr=IpAddr.type:0 ipAddr:0x0a0a0a68000000000000000000000000(10.10.10.104). myIP: IpAddr.type:0 ipv4Addr:0x0a0a0a89(10.10.10.137)
(0003396) startMediaTransmission conferenceID=24378480 passThruPartyID=16777848 remoteIpAddress=IpAddr.type:0 ipAddr:0x0a0a0a68000000000000000000000000(10.10.10.104)
remotePortNumber=16574 milliSecondPacketSize=20 compressType=6(Media_Payload_G722_64k) RFC2833PayloadType=101 qualifierOut=?. myIP: IpAddr.type:0 ipv4Addr:0x0a0a0a89(10.10.10.137)
+++++++++++=Next Phone sends its ACK+++++++++++++++
(0003396) OpenReceiveChannelAck Status=0, IpAddr=IpAddr.type:0 ipAddr:0x0a0a0a89000000000000000000000000(10.10.10.137), Port=20352, PartyID=16777848
+++++++++++=Next CUCM sends ACK to 200 OK from SIP Phone+++++++++++
//SIP/SIPTcp/wait_SdlSPISignal: Outgoing SIP TCP message to 10.10.10.104 on port 62220 index 1890
[885635,NET]
ACK sip:[email protected]:62220;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK23366067b8c0
From: ;tag=192115~d8e94532-127d-4dca-bba0-64b1675da032-24378484
To: ;tag=5B0E9816C2CA6D70F3166FB972EDE4C2
Date: Tue, 19 Feb 2013 21:44:45 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 103 ACK
Allow-Events: presence
Content-Type: application/sdp
Content-Length: 237
v=0
o=CiscoSystemsCCM-SIP 192115 3 IN IP4 10.10.10.195
s=SIP Call
c=IN IP4 10.10.10.137
b=TIAS:64000
b=AS:64
t=0 0
m=audio 20352 RTP/AVP 9 101
a=rtpmap:9 G722/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Now at this point all is well...and the call is connected....
Now here is where the call is failing on the SIP-SCCP-SIP call without MTP
From Point 2 above, CUCM sends a DO to insert MOH, and then gets response, then sends an ACK to 200 Ok back to SIP Phone..
//SIP/SIPTcp/wait_SdlSPISignal: Outgoing SIP TCP message to 10.10.10.104 on port 53361 index 1810
[881160,NET]
ACK sip:[email protected]:53361;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK22035ecc1fcb
From: ;tag=190666~d8e94532-127d-4dca-bba0-64b1675da032-24378214
To: "492" ;tag=97C34E1FB9A11F83DD8D8F5BA4C87C57
Date: Tue, 19 Feb 2013 17:38:50 GMT
Call-ID: 1CCA5149B966DC89AE0F752B8EF86480BC7102DB
Max-Forwards: 70
CSeq: 102 ACK
o=CiscoSystemsCCM-SIP 190666 3 IN IP4 10.10.10.195
s=SIP Call
c=IN IP4 10.10.10.195---------------------------------------IP address of MOH server
t=0 0
m=audio 4000 RTP/AVP 0--------------------------------MOH port 4000
a=rtpmap:0 PCMU/8000
a=ptime:20
a=sendonly---------------------------------------------------------sendonly
+++++NOW Point 6 above (SIP) CUCM sends a=inactive to break media path to MOH server to connect caller and xfered party++++++
//SIP/SIPTcp/wait_SdlSPISignal: Outgoing SIP TCP message to 10.10.10.104 on port 53361 index 1810
[881161,NET]
INVITE sip:[email protected]:53361;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK22045bb7f918
From: ;tag=190666~d8e94532-127d-4dca-bba0-64b1675da032-24378214
To: "492" ;tag=97C34E1FB9A11F83DD8D8F5BA4C87C57
Date: Tue, 19 Feb 2013 17:39:04 GMT
Call-ID: 1CCA5149B966DC89AE0F752B8EF86480BC7102DB
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 103 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Remote-Party-ID: ;party=calling;screen=yes;privacy=off
Contact:
Content-Type: application/sdp
Content-Length: 164
v=0
o=CiscoSystemsCCM-SIP 190666 4 IN IP4 10.10.10.195
s=SIP Call
c=IN IP4 0.0.0.0--------------------------------------------------------------------Media IP is 0.0.0.0
t=0 0
m=audio 4000 RTP/AVP 0
a=rtpmap:0 PCMU/8000
a=ptime:20
a=inactive---------------------------------------------------------------------media inactive
At this point, we should get a response back from the sip phone...
and here is what we got..
++Trying which is expected++++
//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message from 10.10.10.104 on port 53361 index 1810 with 331 bytes:
[881162,NET]
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK22045bb7f918
From: ;tag=190666~d8e94532-127d-4dca-bba0-64b1675da032-24378214
Call-ID: 1CCA5149B966DC89AE0F752B8EF86480BC7102DB
CSeq: 103 INVITE
To: "492" ;tag=97C34E1FB9A11F83DD8D8F5BA4C87C57
Content-Length: 0
++++++++Then we get a BYE+++++++++++++++
/SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message from 10.10.10.104 on port 53361 index 1810 with 576 bytes:
[881163,NET]
BYE sip:[email protected]:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.104:53361;branch=z9hG4bKa2vdQvR7J9OiMyjU;rport
Contact:
Max-Forwards: 70
From: "492" ;tag=97C34E1FB9A11F83DD8D8F5BA4C87C57
Allow: OPTIONS, INVITE, ACK, REFER, CANCEL, BYE, NOTIFY
Supported: replaces, path
User-Agent: Acrobits Softphone Business/2.4.8
To: ;tag=190666~d8e94532-127d-4dca-bba0-64b1675da032-24378214
Call-ID: 1CCA5149B966DC89AE0F752B8EF86480BC7102DB
CSeq: 3 BYE
Content-Length: 0
So this is the root cause of the problem. Your SIP phone does not know how to respond to multiple media break between it and the MOH server.
The difference between this and the succesful SCCP-SIP--SCCP, is that the held party was a sccp phone, hence the sip phone only has to process one a=inactive SDP message, where as in the SIP-SCCP-SIP, the help party was sip, so the sip phone has to process two a=inactive SDP messages
Now what is the difference when MTP is involved! A Big difference. MTP stays in the media path. So there is never a break in media and no inactive SDP attribute is sent. The flow looks like below:
for the initial call...The SIP phone sends its media to MTP and likewise the SCCP phone
SIP------Media------MTP------------Media-------SCCP Phone
When the new destination is dialled and transfer is commited,
SIP-------------media----MTP--------media---------MTP
The final invoite sent to connect 492 and 491 has MTP as the IP address to connect Media to.
++++++++Ivite to 492 ++++++++++++++
INVITE sip:[email protected]:61303;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK231a3b24b862
From: ;tag=192048~d8e94532-127d-4dca-bba0-64b1675da032-24378472
To: ;tag=78FF5BF6C019A55EA020B69BB6A767E2
Date: Tue, 19 Feb 2013 21:24:59 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 102 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Remote-Party-ID: ;party=calling;screen=yes;privacy=off
Contact:
Content-Type: application/sdp
Content-Length: 214
v=0
o=CiscoSystemsCCM-SIP 192048 1 IN IP4 10.10.10.195
s=SIP Call
c=IN IP4 10.10.10.195---------------------------------------------------------------the MTP ip address
t=0 0
m=audio 25038 RTP/AVP 0 101
a=rtpmap:0 PCMU/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
+++++++Invite to 491 +++++++++++++++++
//SIP/SIPTcp/wait_SdlSPISignal: Outgoing SIP TCP message to 10.10.10.94 on port 50376 index 1887
[885429,NET]
INVITE sip:[email protected]:50376;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.10.10.195:5060;branch=z9hG4bK231b78d1b56
From: ;tag=192046~d8e94532-127d-4dca-bba0-64b1675da032-24378467
To: "491" ;tag=F13CE94DE942C47680356A647DC7F916
Date: Tue, 19 Feb 2013 21:24:59 GMT
Call-ID: AE7045FFB2D8D9C28D54651473A14A5D41B5B93C
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Remote-Party-ID: "Leslie2" ;party=calling;screen=no;privacy=off
Contact:
Content-Type: application/sdp
Content-Length: 237
v=0
o=CiscoSystemsCCM-SIP 192046 1 IN IP4 10.10.10.195
s=SIP Call
c=IN IP4 10.10.10.195----------------------------------------MTP
b=TIAS:64000
b=AS:64
t=0 0
m=audio 25030 RTP/AVP 0 101
a=rtpmap:0 PCMU/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Wao! That was a long one isnt it...It was fun too.
So now you can look at your sip phones and see if they can accept two inactive sdp messages within the same call. That way you can remove MTP. otherwise you will have MTP involved in every single call involving a sip phone, even if they do not involve transfers
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"

CME SIP phone outside call issue

Dear all,
i have cme version 9.1 on router 2921 with 7962 sccp phones and 3905 sip phone.
when i place outside call ( to pstn) using the below dial peer, call is processed.
when the call is answered by the autoattendent of the called company ( assume i called x company) , i cant press any other numbers using the sip phones.
i mean if i want to press zero for help or internal extension of the x company, these pressed numbered are not recognized by the analog panasonic PBX of the x company.
Sccp phones works well.
Any help please and below is the dial-peer.
dial-peer voice 1003 pots
trunkgroup 1
corlist outgoing CITIES
description CALLING CITIES
destination-pattern 90[1-9]......
forward-digits 8
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip handle-replaces
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface GigabitEthernet0/2.10
bind media source-interface GigabitEthernet0/2.10
registrar server expires max 36000 min 600
voice class codec 5
codec preference 1 g729r8
codec preference 2 g711ulaw
voice register global
mode cme
source-address 10.100.4.20 port 5060
max-dn 200
max-pool 100
load 3905 CP3905.9-2-1-0.loads
authenticate register
timezone 31
date-format D/M/Y
voicemail 177
tftp-path flash:
create profile sync 000473524028932A
conference hardware
voice register dn 1
number 109
allow watch
pickup-call any-group
pickup-group 170
shared-line max-calls 3
voice register pool 1
id mac 6C99.8984.9678
type 3905
number 1 dn 1
template 1
dtmf-relay sip-notify
voice-class codec 5
username SFD1 password SFD1
thanks

Hi Yahsiel,
firstly thanks for help, secondly if you don't mind i want to ask you the below if possible:
1- in my cme, is there a way when i call an internal extension (e.g 110) from an internal phone it rings normally but when i call from outside-->autoattendent answers-->when i press 110 it get transferred to another phone (e.g 111)....????
2- when i call from outside(pstn) to the cme -->when the plar command is directly to the internal extension the caller id appears but when the autoattendent answers and then transfer to the operator (by pressing zero) the caller id appears as unknown number ??????
3- is the 3905 sip phone support 1Gbps when connected to the PC, as after connecting the phones to the PCs the speed decreased up to 100Mbps?? or it is another matter?
(poe switches is cisco SG200)
regards,

H.323 and SCCP in CCME

I try to make a Cisco Call Manager Express to work with H.323 and SCCP in the same time , each of them working good but they didn't work together .
I mean that H.323 phone can to dial H.323 phone ,and SCCP phone can to dial SCCP phone , but H.323 phone can not to dial SCCP phone .
does there is any additinal commands have to be entered in router to make them work together .
and ,please give me the URL of any documentation that could help in this solution.
Thanks ,
Ahmed,

No additional commands are required. To begin with, make sure that your h.323 phone is set for using codec g.711u only.

MOH for third party sip phones

Hello ,
I using CUCM version 9.1.1.2000-5 .
Does this version support MOH for third party sip phones ?
Thank you

Hi,
I couldn't found better piece of information which list all cases how MoH is implemented for various terminals and hence thought of testing the same. My observations;
SCCP phone -> Hold -> SIP Phone -> MoH plays to SIP phone
SIP Phone -> Hold -> SCCP phone - > Doesn't play MoH
SIP Phone -> Hold -> SIP phone -> Doesn't play MoH
Please note that I have checked with both Xlite and 3CX, results are same.
I have verified in wireshark also, call manager is not sending RTP packets to held party when call is hold by third party SIP phone.
Checked in CUCM 9.1
Thanks
Vivek

Sccp phones unregistred

Similar Messages

Maybe you are looking for