Scdpm 2012 r2 port requirement

Dear all,
We have some servers in DMZ need to backup those servers , can i know what are ports need to open for dpm agent install , backing up , restore ..etc
I got to know from some forum , below ports need to open. Am I missing anything?
135/TCP
Dynamic
5718/TCP
5719/TCP
53/UDP
88/UDP 88/TCP
389/TCP
389/UDP
137/UDP
138/UDP
139/TCP
445/TCP

Hello !
That's right.
You can refer to this official link : http://technet.microsoft.com/en-us/library/hh757794.aspx
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions.

Similar Messages

SCCM 2012 R2 - Ports Required through Firewall

Hi all,
currently working on the list of ports which i'll need to wing over to the network guys to open on the firewalls. Here is what i've come up with from my various readings:
Name
Port
TCP/UDP
Purpose
ICMP
Echo requests messages go from site server to clients
RPC
135
TCP
Site Server > Client | Console > Site Server
NetBIOS
139
TCP
Client < > Site Server
HTTP
80
TCP
Client < > Site Server
HTTPS
443
TCP
Client < > Site Server
SMB
445
TCP
Site Server > Client Computer
LDAP
389
TCP
Site Server > Domain Controllers
RemoteControl
2701
TCP
Site Server > Client
WSUS
8530
TCP
Client > Site Server
WSUS
8531
TCP
Client > Site Server
MSSQL
1433
TCP
Site Server > SQL Server
SQLBroker
4022
TCP
Site Server > SQL Broker Service
Client Notificaiton
10123
TCP
Site Server > Client
WakeUpProxy
9
UDP
Client > Site Server
WakeUpProxy
25536
UDP
Client > Site Server
Is there anything glaringly obvious that i've missed? Or anything i've included unnecessarily? There was a good illustration diagram of how the ports worked in 2007 (http://technet.microsoft.com/en-gb/library/bb632618.aspx) but couldn't seem to find
an equivilant for 2012 R2.
Thanks for the help

Hi,
To add to that the ports for PXE is missing as well if you are going to use it. Have a look at this great excel spreadsheet where you can add a servername a roles in excel and it will give you what ports needs to be opened.. great help.
https://sccmguru.wordpress.com/2012/11/09/configuration-manager-2012-port-information-and-spreadsheet/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

FIM Reporting Services Port requirements

Hi ,
Can anybody let me know what are the communication ports required for deploying fim reporting services.
I am unable to complete the installation.any help would be greatly appreciated.
Regards
Dushyant singh

When using SCSM 2012 (SP1) you also have to install the analytic services on the instances. I can't remember exactly if it was on the DW or MS, but it would tell you during the installation of it.
And make sure your FIM version is at leat 4.1.3451, I went through a lot of pain with version 4.1.3419 en the
KB256143 error.
Find me on linkedin: http://nl.linkedin.com/in/tranet

SCDPM 2012 - backups are running dead slow

SCDPM 2012 - backups are running dead slow.
Below is the details of software and hardware.
Server OS : WIndows Server 2008 R2
DPM version : SCDPM 2012 , Version : 4.0.1920.0
Server Hardware : Prolinet BL 460C G1
Tape drive - LTO 4 drives
Network : HP NC325m PCIe Quad Port Adapter , driver version 16.1.0.1 ( 10/16/2013 )
Could you please help me to resolve this issue. Thanks
Raghavendra Bhat

we've got a Windows Server 2008 R2 server that has been running DPM v4.0.1920.0 since it was released in
10/18/2012.
we are using D2D2T
We did have tape throughput performance issues initially, but after switching to the in-box LTO tape-drive drivers included with the operating system (instead on HP drivers), and setting several registry values associated with tape ports, we got it working.
see http://social.technet.microsoft.com/Forums/en-US/3cda9c6a-688d-4c2d-8dc0-9d04b8ea1f05/dpm-2012-not-filling-lto3-tapes?forum=dpmtapebackuprecovery
The best advice to speed up the D2D part of the backup is to configure any antivirus software if present to not perform any real-time scanning made by the DPMRA.EXE and DRSR.EXE executables.
Don't backup the system drive of the DPM server to tape, because there are as many junctions as you have protected volumes define, which makes the backup not work at all.
Also, for the system being backed up D2D,

New SCDPM 2012 Deployment Scenario and tape Library Sharing.

Folks
I am having one SCDPM 2012 SP1 on Server 2008 R2 with one tape library. I am going to build another second DPM on Server 2012 and I want to share the same library which is on first DPM.
Before I build second DPM server I want to make some doubts clear so it does't create issues later.
Both DPM will be physical.
I am reading technet link to share tape ibrary : http://technet.microsoft.com/en-us/library/hh758124.aspx
And My queries are:
1) The tape library must be in a storage area network (SAN) environment.
>The tape Hewlett Packard LTO Ultrium-5 drive I have is attched to first DPM server through SCSI array.Dont know if it is SAN supported.
2) We recommend that the system configuration of the library server computer and all library client computers be as similar as possible, and that you do not configure any protection groups on the library server.
>As I have attached library to my first DPM server which is having 22 Protection groups with 562 datasources. Can it be promoted as a Library server? If not then what is solution for this.
3)All DPM servers using a shared library must use a similar SQL Server setup for hosting DPM databases.You cannot have some DPM servers using local instance and others using a remote instance.
>My first DPM is hosting its Database on its own (local) So should I setup SQL on second DPM localy?
4)SQL accounts should be DOMAIN accounts? On the technet link it is showing SQL failover cluster, where does it require? As image showing it is required between library clients but I will have one library server and one library client, will I needed SQL CLuster?
This was related to Tape, now other queries I have if second DPM and tape sharing deployed successfully.
1) First DPM has reached LDM records occupancy 79% and I have identified non-colocated datasources/Protection groups which are occupying larger amount of LDM. I will move/recreate these protected groups on 2nd DPM with COLOCATION so they cant use much LDMs.
a)Should I stop protection on 1st DPM and add these protection groups on 2nd DPM. Will it allow me to add since Inactive replica there would be on 1st DPM for 30days
b) Or should I Migrate these PGs?
c) What is best practice for this?

Figured it out. Since I'm on a preconfigured RDS server, the RDS Session Host role is already installed. So technically Session-based desktop deployment is already set up. It's the difference between the session host role and the Virtualization
Host roles...slightly confusing when you walk into the middle of the deployment.
It would also explain my second part of the question since the session host role is installed....

Error while opening SCDPM 2012 r2 console

Hi,
on a new SCDPM 2012 R2 UR3 console only the user that performed the installation is able to open the console. All other users are not able to. Those other users are members of local admin group and some also sysadmin on DPM instance of SQL Server.
Error message appearing: Error ID 948 Unable to connect to <DPM Server>. I checked that all DPM Services are running and that I am able to start the Manual ones. No errors there. I also checked if there are sync Job open, nothing there.
The only other message I found is a "Information" message in application log - Source: <MSSQLInstance> –Event ID 18456 –Information: Category Login; Keywords: Classic, Audit Failure
Login failed for users XXX. Reason: Could not find a login matching the name provided. It seems to me that there is a permission problem here. I found a similar entry for SCOM. There the problem was that a Domain account
was used but it was treated as a SQL account (no Domain transfered) against the SQL DB. I am assuming that something like that happens here but I have no idea how to move on. I am not sure what credentials are used against the SCDPM-DB when a user tries to
log on. Maybe I am going in a wrong direction? Does someone have an idea?

Hi Sroe,
they are many causes for a 18456 Event. Can you post the Event Details here?
Regards
Matthias

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Reporting services for SCDPM 2012 R2

Hi all,
We are planning to implement SCDPM 2012 R2 with Chained protection concept (DPM1 is the primary and DPM2 is the secondary), here my question is it possible to host both (two) SQL reporting services in same instance ?
Thanks,
Sengottuvel M

Hi,
What's new in System Center 2012 - DPM
Starting with DPM 2012 we added support for multiple DPM servers to share one instance of SQL Server for DPMDB. This also means that they will share the same SQL reporting. You should not use that shared instance for any other purpose.
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Ports required to be opened for Financial Reporting Studio Client access

Hi Everyone,
What are the exact ports which are required to be opened between the client machines and the Report Server so that users are able to use the Reporting Studio. (I guess opening port 8200 only will not suffice, will it?)
Thanks,
Sayantan

Sayantan,
Chapter 15 of the Financial Studio Report documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/fr_user.pdf) specifically pages 300 to 311 explain the default setup ports, the amount of Essbase ports required and such.
JTS

Restore Online Backup in SCDPM 2012 R2

Dear all,
i have a question on SCDPM 2012 R2 + Azure Backup.
i had deployed such solution and disk backup are perfect! However, i had configured online backup policy to Azure Backup since February and i noticed i do not have the options to allow me to perform online restore!
Below is my online protection policy:
i believe i configured it correct to adhere below policy:
- perform a monthly backup and keep for ONE year
- perform a yearly backup and keep for SEVEN years
but when i go to recovery tab, it just doesnt show February backup, nor March 2nd have any backup. all the backup available are disk short term of 30 days.

Hi DeVaLiaN,
Thanks for posting here!
Each DPM backup to Azure Backup is a recovery point. With an Azure current limit of 366 recovery points your retention time for all backups shouldn’t exceed the 366 limit. In other words the retention times you set for you daily + weekly + monthly
+ yearly backups should sum up to 366 or less.
You might want to double check your configuration.
Refer to the below listed articles which might help you narrow down the issue.
http://blogs.technet.com/b/systemcenter/archive/2014/03/16/using-azure-backup-with-dpm.aspx
http://social.technet.microsoft.com/wiki/contents/articles/19751.system-center-2012-data-protection-manager-dpm-sp1-part-4-backup-to-azure.aspx
https://msdn.microsoft.com/en-us/library/azure/dn337332.aspx
Hope this helps!
Regards,
Sadiqh

Failed when running Prerequsites SCDPM 2012 R2 : Status="FailedToPerform" CheckId="RemoteDbMsi"

I installing SCDPM 2012 R2, on the step Prerequisites check, I got a error bellow. SQL server is remotely with cluster SQL Server 2012 SP2.
Please advise wht should i do.. :(
====
<?xml version="1.0" encoding="UTF-16"?>
-<Report xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="Processor"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="Memory"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="MMCVersion" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=55423"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB962975" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=184896"/>
<CheckResult InstallableForRemoteSQL="true" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB975759" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=184897"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB2279787" ActionUrl="http://support.microsoft.com/kb/2279787"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB2223201" ActionUrl="http://support.microsoft.com/kb/2223201"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="MonadSoftware" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=178542"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="DotNetRequiresReboot"/>
<CheckResult InstallableForRemoteSQL="true" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SISFilter"/>
<CheckResult InstallableForRemoteSQL="true" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="MSIVersion"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RebootRequired"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlServerTools"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlServer"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ReportingServer"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="See the log file for details and try again." ErrorMessage="Failed to perform the check." Status="FailedToPerform" CheckId="SqlAgentService"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="See the log file for details and try again." ErrorMessage="Failed to perform the check." Status="FailedToPerform" CheckId="SqlServerService"/>
<CheckResult InstallableForRemoteSQL="false" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlServerReportingServices"/>
<CheckResult InstallableForRemoteSQL="false" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlReportServerService"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ActiveDirectory"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlEval"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ClientTCPEnabled"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RemoteDbDPMInstalled"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ReportingSecureConnectionLevel"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RemoteDbDiskSpace"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RemoteDbTCP"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="See the log file for details and try again." ErrorMessage="Failed to perform the check." Status="FailedToPerform" CheckId="RemoteDbMsi"/>
</Report>
====

For the default instance no. Your SQL server is on another server? No _ in the name of the server?
Do you mount the ISO or extract it and launch the setup?
Ensure that the DPM ISO is not corrupted. I had a similar problem one time, I downloaded the ISO again and it works fine.

SCDPM 2012 R2 High Avalibility Design?

Hello Everyone,
Can we Install SCDPM 2012 R2 in High Availblity Mode?
If yes What's the Design for SCDPM high availibility?
Thnks.......

Hello Everyone,
Can we Install SCDPM 2012 R2 in High Availblity Mode?
If yes What's the Design for SCDPM high availibility?
Thnks.......
Hi,
There is not a High Availability solution for DPM such as clustering DPM servers. The options you do have are
Primary and Secondary DPM servers, DPM chaining, or
Cyclic protection. Here is a breakdown of each:
Primary to secondary protection: The database and replicas stored on a primary DPM server can be backed up to a secondary DPM server. If the primary server fails the secondary server continues to back up protected workloads.
For more on Primary to secondary protection:
http://technet.microsoft.com/en-us/library/jj244598.aspx
DPM chaining: A chain of DPM servers provide protection, and each server protects the next one in in the chain. For example:
DPM1 is protected by DPM2 (DPM1 is the primary and DPM2 is the secondary).
DPM2 is protected by DPM3 (DPM2 is the primary and DPM3 is the secondary)
To setup chaining:
http://technet.microsoft.com/en-us/library/hh758194.aspx
Cyclic protection: One DPM server is backed up by another DPM server, and vice versa. So that DPM1 protects DPM2, and likewise DPM2 protects DPM1.
More on Cyclic protection:
http://technet.microsoft.com/en-us/library/jj244597.aspx#BKMK_Cyclic
I hope this adds some clarification around this.
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Ports Required for SCCM Distribution point

Hi All,
Can anybody tell me the ports required for distribution point. as in I have a site server with distribution point in HO, i want to have a distribution point server on a remote site. i went through the microsoft document which says u require port 445 open between site server and distribution point and it says u only require port 80 or 443 open between distribution point and branch distribution point. little confused!!!. which ports i require to be open between site server with distribution and remote site distribution point.
Cheers.

Hi,
Regarding the doc here:
http://technet.microsoft.com/en-us/library/bb632618.aspx
Site Server -- > Distribution Point
SMB 445 TCP
RPC Endpoint Mapper 135 UDP and TCP
RPC dynamic TCP
Site Server < -- > Site Server
SMB 445 TCP
Point to Point Tunneling Protocal (PPTP) 1723 TCP
Follow me through my blog and Twitter!

Cluster Event Warning after Installing SCDPM 2012 R2

Hi
I just installed SCDPM 2012 R2 on Server 2012 R2 Box (that is also a cluster node), after installing the SCDPM 2012 R2 on Hyper-V Cluster Node i am getting below Warning in Cluster Events. I just want to know what are the impact of this event ..??
Is it also impacts on SCDPM Backup??? is any solution to resolve this warning.
Error
Shailendra Dev

Hi Shailendra Dev,
This event can caused by third Party filter driver has been identified, you can refer the following article to find out the incompatible driver then uninstall the software.
More related information:
Troubleshooting ‘Redirected Access’ on a Cluster Shared Volume (CSV)
http://blogs.technet.com/b/askcore/archive/2010/12/16/troubleshooting-redirected-access-on-a-cluster-shared-volume-csv.aspx
Allocated Altitudes
http://msdn.microsoft.com/en-us/library/windows/hardware/dn265170(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 with SCDPM 2012 MP

We've SCOM 2012 (without R2...). We need to deploy SCDPM 2012 R2 Management Pack.
My questions are:
1) Is it necessaty deploy SCDPM 2012 R2 central console on SCOM Server?
2) What are the benefits of deploying SCDPM 2012 R2 console?
3) Is there a problema with SCOM 2012 and SCDPM 2012 R2 central console?
4) If I've 4 SCOM servers...Must I deploy SCDPM central console on all SCOM servers ??
Thanks

Install the DPM Central Console on the OpsMgr Management Server
Central Console is a System Center 2012 Operations Manager console that can be deployed to manage and monitor multiple System Center 2012 – Data Protection Manager (DPM) servers from a single location
No, it must working.
No, it not necessary to deploy on all servers
http://www.systemcentercentral.com/quicktricks-where-are-the-dpm-2012-management-packs-scom-scdpm-sysctr/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Scdpm 2012 r2 port requirement

Similar Messages

Maybe you are looking for