SCE 8000 spam mitigation and subscriber notification
Hello everyone,
could you help me with misunderstanding of sce based subscriber spam notification?
I'm trying to implement the scheme where subscriber should be notified for the spam activity only once. So I set options like on pictures below, but my test subscriber blocked permanently. I even tryed to wait about a day, but without success. Obviosly if I drop subscriber session manually it will help, but it's doesn't seems as proper solution.
According to "Cisco Service Control Service Security: Outgoing Spam Mitigation Solution Guide", a subscriber doesn't considered as spamer after certain timeout of spam inactivity, I tryed to wait about a day, but without success.
So whether feature don't work or I do it wrong, so could you explain me please, how I should implement notifying subscriber only once till next spam accident?
Well, the answer was the following command:
connection-mode inline on-failure external-bypass
Similar Messages
-
SCE SCA BB Console and Subscriber Manager problem
Hi,
I need to do a Backup/restore of Subscriber in a SCE2020 engine.
I try to connect into the SCE with SCA BB Console and Subscriber Manager tools.
I dosn't work. I can't get the backup .csv file.
+ 22.11.10 12:16:37 CET | INFO | Connecting to 192.168.1.1: Connecting to the SM
+ 22.11.10 12:16:38 CET | INFO | Connecting to 192.168.1.1: Open Subscriber Management perspective
+ 22.11.10 12:16:38 CET | INFO | Connecting to device at 192.168.1.1...
but nothing more...
Note: No problem with Reporter tools.
Any Idea ?
Thank you for your help.
Best regards.
SebThanks a lot Gurus!!! now i can use SCA BB console following steps by
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Tom Debruyne
by the way i lost all mine last hosts configured there but no problem i can add them now!
Thanks Tom!!! -
What else SCE couldn't do without Collection manager and Subscriber Manager for SCE?
Can we still monitor the traffic and control the subscriber even we do not have any Collection manager and Subscriber Manager? with SCE alone couldn't analysis or control the traffic?
Hi,
Without CM you can not generate reports based on RDR collection process. For example if you dont have Collection Manager you can not generate reports that are predefined on the SCA Reporter or insight. Only you can do is you can poll SNMP counters/values by a s/w and you can graph them, but it is not suitable and not covers the all data that SCE collects and reports. And for the SM side if you want to communicate with a policy/external server you really need an SM, also you can use its internal Quota manager to count quota. -
SCE 8000 with High CPU running SCOS 3.6.5
Hi Guys,
We have 1 SCE 8000 out of 20 that suddenly started showing high CPU
SCE_VINA02#>show processes cpu sorted
CPU utilization for five seconds: 99%/ 0%; one minute: 99%; five minutes: 99%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
6572 1743157450 2912773 0 41.79% 48.95% 42.00% 0 (scos-main)
6592 377205520 2822045 0 25.47% 22.96% 26.37% 0 (scos-main)
3773 -1131308800 2912909 0 22.09% 22.05% 22.19% 0 RucMain
20676 249912990 1895163 0 17.51% 15.86% 18.65% 0 (scos-main)
4058 1241380640 2839209 0 8.76% 9.06% 9.00% 0 PartyDBManager
4038 58347790 1778224 0 3.18% 3.40% 3.63% 0 controlRpcExtServer
4042 199502330 2718111 0 1.99% 2.03% 2.06% 0 tFormatter
6594 80405570 2558527 0 1.99% 2.59% 2.80% 0 (scos-main)
20677 48485580 1405062 0 1.99% 2.28% 2.48% 0 (scos-main)
4595 309332240 2912876 0 1.39% 2.13% 2.12% 0 HwChk
4040 112684050 2736243 0 1.00% 1.12% 1.14% 0 qReaderExt
3639 264215460 2848244 0 1.00% 0.94% 0.91% 0 (scos-main)
4041 69509430 2868791 0 0.80% 0.74% 0.75% 0 qReaderInt
6573 235121090 2801654 0 0.80% 16.28% 5.13% 0 (scos-main)
6574 24244400 624919 0 0.60% 0.96% 3.70% 0 (scos-main)
3771 53398760 2912883 0 0.40% 0.38% 0.39% 0 CpuUtilMonitor
4037 32594910 2537807 0 0.40% 0.36% 0.38% 0 tLogger
3712 16686250 1627766 0 0.20% 0.11% 0.11% 0 fanControlTask
3778 46339600 2912908 0 0.20% 0.27% 0.28% 0 MsgQuMess-rcv
4028 8361600 734410 0 0.20% 0.07% 0.06% 0 tCCWatchdog
4059 5358870 353706 0 0.20% 0.04% 0.02% 0 SNMP agentx Task
2971 2518240 166310 0 0.20% 0.05% 0.01% 0 (nfsd)
The CPU is STUCK at 99%, even when the traffic is minimal, we are seeing that the scos main process is hogging the CPU
When i do the show interface line 0 counter cpu-utilization it shows me a different value than the first command, which is more reasonable according tho the quantity of traffic that is flowwing through the box at this moment.
SCE_VINA02#>show interface LineCard 0 counters cpu-utilization
Traffic Processor CPU Utilization:
==================================
TP 1 CPU Utilization: 17%
TP 2 CPU Utilization: 16%
TP 3 CPU Utilization: 23%
TP 4 CPU Utilization: 17%
TP 5 CPU Utilization: 17%
TP 6 CPU Utilization: 15%
TP 7 CPU Utilization: 18%
TP 8 CPU Utilization: 16%
TP 9 CPU Utilization: 16%
TP 10 CPU Utilization: 15%
TP 11 CPU Utilization: 18%
TP 12 CPU Utilization: 18%
SCE_VINA02#>
When i log under linux in the box, it shows me another value different than what the other first two commands showed me
[root@SCE_VINA02 ~]#>top
top - 14:26:47 up 169 days, 7:46, 1 user, load average: 3.86, 3.68, 3.31
Tasks: 64 total, 1 running, 63 sleeping, 0 stopped, 0 zombie
Cpu(s): 59.5%us, 2.2%sy, 0.0%ni, 36.4%id, 1.3%wa, 0.2%hi, 0.5%si, 0.0%st
Mem: 2028668k total, 1914156k used, 114512k free, 47392k buffers
Swap: 0k total, 0k used, 0k free, 320416k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3639 root 20 0 1353m 1.3g 44m S 134 65.9 355517:28 scos-main
23 root 15 -5 0 0 0 S 0 0.0 24:59.23 scos-dump
2973 root 20 0 0 0 0 S 0 0.0 39:56.53 nfsd
3455 root 20 0 16188 2620 1756 S 0 0.1 122:21.52 scos-sys-cmd-se
26549 root 20 0 2476 1116 896 R 0 0.1 0:00.05 top
1 root 20 0 1776 616 540 S 0 0.0 3:17.32 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:58.98 migration/0
4 root 15 -5 0 0 0 S 0 0.0 0:42.82 ksoftirqd/0
5 root RT -5 0 0 0 S 0 0.0 2:25.35 watchdog/0
6 root RT -5 0 0 0 S 0 0.0 0:59.95 migration/1
7 root 15 -5 0 0 0 S 0 0.0 0:02.60 ksoftirqd/1
8 root RT -5 0 0 0 S 0 0.0 0:18.66 watchdog/1
9 root 15 -5 0 0 0 S 0 0.0 161:33.60 events/0
10 root 15 -5 0 0 0 S 0 0.0 46:47.38 events/1
11 root 15 -5 0 0 0 S 0 0.0 0:00.00 khelper
12 root 15 -5 0 0 0 S 0 0.0 9:55.55 kblockd/0
13 root 15 -5 0 0 0 S 0 0.0 3:26.99 kblockd/1
16 root 15 -5 0 0 0 S 0 0.0 0:03.08 kswapd0
17 root 15 -5 0 0 0 S 0 0.0 0:00.00 aio/0
18 root 15 -5 0 0 0 S 0 0.0 0:00.00 aio/1
19 root 15 -5 0 0 0 S 0 0.0 0:00.00 nfsiod
20 root 15 -5 0 0 0 S 0 0.0 0:00.00 mtdblockd
21 root 15 -5 0 0 0 S 0 0.0 50:36.28 skynet
22 root -86 -5 0 0 0 S 0 0.0 280:11.75 hw-mon-regs
24 root -91 -5 0 0 0 S 0 0.0 22:36.48 wdog-kernel
25 root 15 -5 0 0 0 S 0 0.0 0:00.00 rpciod/0
26 root 15 -5 0 0 0 S 0 0.0 0:00.00 rpciod/1
80 root 15 -5 0 0 0 S 0 0.0 0:00.17 kjournald
84 root 15 -5 0 0 0 D 0 0.0 17:05.31 kjournald
92 root 15 -5 0 0 0 S 0 0.0 1:36.60 kjournald
246 root 15 -5 0 0 0 S 0 0.0 36:09.67 bond0
952 root 20 0 0 0 0 S 0 0.0 0:00.01 pdflush
1032 root 20 0 0 0 0 S 0 0.0 3:12.76 pdflush
1430 bin 20 0 2024 500 388 S 0 0.0 0:00.01 portmap
1459 root 20 0 1884 644 536 S 0 0.0 0:22.97 syslogd
1467 root 20 0 1772 408 336 S 0 0.0 0:00.04 klogd
1469 root 20 0 1764 512 448 S 0 0.0 0:00.00 getty
1710 root 20 0 3308 1048 488 S 0 0.1 73:02.73 scos
1711 root 20 0 2476 568 484 S 0 0.0 0:00.19 tee
1733 root 20 0 3308 980 420 S 0 0.0 0:00.00 scos
1735 root 20 0 2948 1280 1080 S 0 0.1 0:00.00 sh
[root@SCE_VINA02 ~]#>
We have a TAC opened but is being more than a 2 weeks and the engineer hasnt being able to find the source of the issue, she even has a ticket open with the BU
Please if anybody out there might be facing a similar issuehere is the RDR statistics and debug summary log.
SUBSCE8K01#>show RDR-formatter statistics
RDR-formatter statistics:
=========================
Category 1:
sent: 1733914918
in-queue: 0
thrown: 0
format-mismatch: 0
unsupported-tags: 0
rate: 404 RDRs per second
max-rate: 1984 RDRs per second
Category 2:
sent: 919837769
in-queue: 0
thrown: 0
format-mismatch: 0
unsupported-tags: 0
rate: 0 RDRs per second
max-rate: 3657 RDRs per second
Category 3:
sent: 0
in-queue: 0
thrown: 0
format-mismatch: 0
unsupported-tags: 0
rate: 0 RDRs per second
max-rate: 0 RDRs per second
Category 4:
sent: 156867972
in-queue: 0
thrown: 0
format-mismatch: 0
unsupported-tags: 0
rate: 105 RDRs per second
max-rate: 163 RDRs per second
Destination: 10.123.2.25 Port: 33000 Status: up Active: yes
Sent: 1733915274
Rate: 396 Max: 1984
Last connection establishment: 3 weeks, 6 days, 20 hours, 45 minutes, 27 seconds
Destination: 10.123.2.26 Port: 33000 Status: up Active: no
Sent: 0
Rate: 0 Max: 0
Last connection establishment: 0 hours, 6 minutes, 14 seconds
Destination: 127.0.0.1 Port: 33001 Status: up Active: no
SUBSCE8K01#>
SUBSCE8K01#>
SUBSCE8K01#>sh proc cpu sorted
CPU utilization for five seconds: 96%/ 0%; one minute: 97%; five minutes: 99%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
4929 293498890 475542 0 99.00% 21.55% 16.40% 0 (scos-main)
4555 573866000 478707 0 25.65% 25.89% 25.96% 0 RucMain
4918 625477080 478701 0 25.45% 29.72% 33.67% 0 (scos-main)
1810 88530 192 0 7.96% 14.82% 9.38% 0 (scos-main)
4927 172451130 474889 0 7.56% 14.99% 9.97% 0 (scos-main)
1809 97510 192 0 7.16% 17.72% 12.00% 0 (scos-main)
5359 122862320 476098 0 6.96% 13.29% 6.39% 0 (scos-main)
4817 83463610 476198 0 6.36% 6.31% 6.29% 0 controlRpcExtServer
5358 137770620 476591 0 5.97% 5.68% 6.14% 0 (scos-main)
5135 107450270 475407 0 4.38% 4.86% 6.47% 0 (scos-main)
4840 584104440 476935 0 4.37% 11.73% 5.28% 0 PartyDBManager
4821 152431380 478706 0 3.58% 3.40% 3.37% 0 tFormatter
4919 249427970 331960 0 2.98% 0.92% 0.92% 0 (scos-main)
4819 33178220 462486 0 1.59% 1.55% 1.39% 0 qReaderExt
5516 51751940 478645 0 1.39% 2.17% 2.15% 0 HwChk
4820 22420960 461376 0 0.99% 0.96% 0.96% 0 qReaderInt
3345 42535190 476936 0 0.99% 0.87% 0.84% 0 (scos-main)
4816 16505300 474586 0 0.80% 0.78% 0.72% 0 tLogger
4560 9043340 478707 0 0.40% 0.34% 0.34% 0 MsgQuMess-rcv
4521 7505470 476057 0 0.40% 0.36% 0.36% 0 nsm-to-sm-med-dispatcher
4520 8472310 475729 0 0.40% 0.38% 0.37% 0 sm-to-nms-high-collector
4551 10427120 478707 0 0.40% 0.45% 0.44% 0 CpuUtilMonitor
SUBSCE8K01#>
Summary of debug file.
************** CURRENT APPLICATION INFORMATION ***************
Application file: /apps/data/scos/release_.sli
Application name: Engage SML Version 3.6.5 build 41 (Protocol Pack 26 build 15)
Using Lib - PL_V3.6.5_B1
Using Lib - Classifier_V3.6.5_B1
Application help: Entry point of Engage
Original source file: /auto/srbu-proj1-bgl/apps/users/aninatar/autoBuild/App/SML/Engage/V3.6.5/src/com/pcube/AppTemplate/Main/template_app_main.san
Compilation date: Thu, October 20, 2011 at 23:30:08
Compiler version: SANc v3.20 Build 14 built on: Tue 08/04/2009 06:58:22.;SME plugin v1.1
Capacity option used: 'EngageDefaultSCE8000'.
************** DBG LOG FILE MESSAGES HISTOGRAM ***************
MOD ID : MSG ID | SEVERITY | AMOUNT | DROPS | STRING
----------------+-----------+---------+------------|-------
Total number of different <> messages is 0
Total number of different <> messages is 0
[0x0502:0x000a] | | 0120529 | 0000001056 | Party DB: PartyDB::waitForState(pcid=%d) called, maxPCIDs=%d.
[0x0102:0x0013] | | 0024763 | 0000000000 | Application Subscriber Context: Breach counter is negative for subscriber service counter=%d
[0x0ce1:0x0010] | | 0000027 | 0000000000 | SnmpMibs: %s %s %d %d.
[0x0505:0x0194] | | 0000005 | 0000000000 | Party DB Manager: (anonymous) createUnmappedParty - rcid = %lu, pid=%lu, ipAddress = 0x%x - came from ruc=%u, selected ruc=%u wrong ruc selected.
[0x0300:0x004d] | | 0000013 | 0000000000 | Formatter: RdrVXConnection: Closed existing socket to port %d. (%s)
[0x0910:0x002c] | | 0000002 | 0000000000 | RuC Interrupt Handler: %s.
[0x0920:0x000a] | | 0000002 | 0000000000 | Logger: %s
Total number of different messages is 7
[0x0a10:0x0004] | | 0000027 | 0000000000 | System Message: System Info message:
%s
[0x0aa2:0x001e] | | 0000013 | 0000000000 | SNMP Agent: %s
[0x0300:0x0059] | | 0000013 | 0000000000 | Formatter: Formatter connection closed: address %s, port %d.
[0x0aa2:0x001c] | | 0000008 | 0000000000 | SNMP Agent: %s
[0x0300:0x0056] | | 0000008 | 0000000000 | Formatter: No Formatter connections is open on category %d.
[0x0aa2:0x001d] | | 0000013 | 0000000000 | SNMP Agent: %s
[0x0300:0x005a] | | 0000013 | 0000000000 | Formatter: Formatter connection opened: address %s, port %d.
[0x0aa2:0x001b] | | 0000008 | 0000000000 | SNMP Agent: %s
[0x0300:0x0057] | | 0000008 | 0000000000 | Formatter: Formatter active connection opened : address %s, port %d, category %d.
[0x0505:0x029e] | | 0000001 | 0000000000 | Party DB Manager: notifyPullRequestByPid() - %lu calls for notifySpawn() - failed in the last hour.
[0x0920:0x0008] | | 0000004 | 0000000000 | Logger: %s
[0x0743:0x0000] | | 0000001 | 0000000000 | TELNET_SSH_SERVER: A %s session from %s was established.
[0x0730:0x0010] | | 0000016 | 0000000000 | CLI: Executing CLI command: '%s'.
[0x0309:0x002c] | | 0000001 | 0000000000 | CmdlFFS: File system operation : del %s
Total number of different messages is 14 -
The Publish-Subscribe Notification latency in OCI is 5 seconds
I have an OCI application where I register a callback to receive publish-subscribe notifications from an Oracle queue.
The problem that I have is that I am receiving messages every 5 seconds intervals (the callback is called every 5 seconds if there are messages in the queue).
It looks like that there is a process that is monitoring the database queue every 5 seconds. Is there a way to change that behavior?.
I am getting the same behavior in Windows and Linux systems.
This is the PL/SQL code that I am executing to create the database queue:
DECLARE
subscriber sys.aq$_agent;
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE(
QUEUE_TABLE=>'TestUser."TestTable_msg_table"',
MULTIPLE_CONSUMERS => TRUE,
QUEUE_PAYLOAD_TYPE =>'RAW');
DBMS_AQADM.CREATE_QUEUE(
QUEUE_NAME=>'TestUser."TestTable_queue"',
QUEUE_TABLE=>'TestUser."TestTable_msg_table"');
DBMS_AQADM.START_QUEUE('TestUser."TestTable_queue"');
subscriber := sys.aq$_agent('AGENT', null, null);
DBMS_AQADM.ADD_SUBSCRIBER(
QUEUE_NAME=> 'TestUser."TestTable_queue"',
SUBSCRIBER => subscriber,
DELIVERY_MODE => DBMS_AQ.BUFFERED);
END;
CREATE OR REPLACE TRIGGER TestUser."TestTable_changes"
AFTER DELETE OR INSERT OR UPDATE ON TestUser."TestTable"
FOR EACH ROW
DECLARE
enq_ct dbms_aq.enqueue_options_t;
msg_prop dbms_aq.message_properties_t;
enq_msgid raw(16);
userdata raw(100);
BEGIN
enq_ct.visibility := DBMS_AQ.IMMEDIATE;
enq_ct.delivery_mode := DBMS_AQ.BUFFERED;
msg_prop.delay := DBMS_AQ.NO_DELAY;
DBMS_AQ.ENQUEUE('TestUser."TestTable_queue"',enq_ct, msg_prop,userdata,enq_msgid);
END;
This is the OCI code that I am executing to register for changes into the queue:
/* Allocate subscription */
OCIHandleAlloc((dvoid *)hEnv,(dvoid **)&hSub,
(ub4) OCI_HTYPE_SUBSCRIPTION,
(size_t) 0, (dvoid **) 0);
OCIAttrSet((dvoid *)hSub, (ub4) OCI_HTYPE_SUBSCRIPTION,
(dvoid *) subName, (ub4) strlen(subName),
(ub4) OCI_ATTR_SUBSCR_NAME, hError);
/* Subscription callback */
OCIAttrSet((dvoid *)hSub,(ub4)OCI_HTYPE_SUBSCRIPTION,
(dvoid *) onTableChange, (ub4) 0,
(ub4) OCI_ATTR_SUBSCR_CALLBACK, hError);
/* Set subscription context */
OCIAttrSet((dvoid *) tblInfo, (ub4) OCI_HTYPE_SUBSCRIPTION,
(dvoid *) 0, (ub4) 0,
(ub4) OCI_ATTR_SUBSCR_CTX, hError);
/* Set subscription namespace */
OCIAttrSet((dvoid *) hSub, (ub4) OCI_HTYPE_SUBSCRIPTION,
(dvoid *) &subNamespace, (ub4) 0,
(ub4) OCI_ATTR_SUBSCR_NAMESPACE, hError);
/* Begining Registration for subscription */
OCISubscriptionRegister(hSvc,&hSub,1,hError,OCI_DEFAULT);
ThanksThis has come up before. No definitive solution but a purge of the queue is worth a try:
see=> Re: Dequeing happens only every 5 Seconds -
Hi!
Cisco SCE 8000 working normally while traffic through it not pass. When i connect optical links and start passing traffic throught cisco, i have a problem. SCE watchdog run software reboot with error:
2013-09-30 13:54:40 | FATAL | CPU #000 | A problem occurred in the SCE8000 Service Control Module Extended (SCM-E) slot 1 ,Please report to Cisco's customer support.
2013-09-30 13:54:40 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2013-09-30 13:54:40 | ERROR | CPU #000 | SE Watchdog Module: An Error occurred. Please report to Cisco's customer support
2013-09-30 13:54:41 | WARN | CPU #000 | SE Watchdog Module: A problem occurred. Please report to Cisco's customer support
2013-09-30 13:54:41 | INFO | CPU #000 | Party data base was closed.
In debug file i found:
Interrupt Received from: SimbaDPT[0].Tx[0].CTX_ISR.ECCMultiErrorInt - description: RLDRAM ECC multi bit error interrupt.
What the problem could be?I have tried 3.7.2, 3.8.5, 4.0.0. Unfortunately, the result is the same. I think that hardware problem (RAM).
-
Memory Leak in Publish-Subscribe Notification
I am using publish-subscribe notification for async-notification on LINUX( ORACLE 8.1.7). Before doing it, I read a document(OCI Programmer!/s Guide) about publish-subscribe notification(chap.9).
I created Queue(AQ) in database and registered callback function using 'OCISubscriptionRegister()'.
All operations are done succesfully , but when OCISubscriptionRegister() is called, memory leak seems to occur. I check up the memory leak using LINUX system call( 'top' and 'vmstat' ).
Does anyone have any idea or experience of this problem?<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Lee Sung-won ([email protected]):
Thanks for your reply..
I have something to ask you. where can I get a document listing the bug?<HR></BLOCKQUOTE>
null -
Problem while applying configuration to SCE 8000 using SCE-API
We are facing an issue while applying service configuration to SCE 8000 device using SCE API supplied by CISCO.
We have sample .pqb file which we are using to upload to SCE 8000. We are using 3.5.5 version of firmware on SCE.
Attached is exception file which contains sample .pqb and trace log that we see when we apply configuration. Please note, that we are using RHEL5 platform, JDK 1.5.0_1 and standalone java program to apply configuration on SCE using API
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
at com.pcube.management.framework.fsmanager.RFileInputStream.close(RFileInputStream.java:240)
at java.io.BufferedInputStream.close(BufferedInputStream.java:440)
at com.pcube.apps.engage.management.Utilities.copyDeviceToLocalRMI(Utilities.java:357)
at com.pcube.apps.engage.policy.ConfigurationRetriever.retrievePolicy(ConfigurationRetriever.java:85)
at com.pcube.apps.engage.policy.Test.fetchPpUpgradeVersion(Test.java:15)
at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:460)
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
failed to fetch current pp upgrade version listjava.lang.NullPointerException0.0.0 PP0com.pcube.apps.engage.common.ApplyException: Client version 3.5.5 PP20 is different than SCE version 0.0.0 PP0, therefore apply is not allowed
at com.pcube.apps.engage.policy.SEPolicyMediator.checkPpVersion(SEPolicyMediator.java:335)
at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:114)
at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:95)
at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:461)
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
at com.pcube.management.framework.fsmanager.RFileInputStream.close(RFileInputStream.java:240)
at java.io.BufferedInputStream.close(BufferedInputStream.java:440)
at com.pcube.apps.engage.management.Utilities.copyDeviceToLocalRMI(Utilities.java:357)
at com.pcube.apps.engage.policy.ConfigurationRetriever.retrievePolicy(ConfigurationRetriever.java:85)
at com.pcube.apps.engage.policy.Test.fetchPpUpgradeVersion(Test.java:15)
at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:460)
com.pcube.apps.engage.common.ApplyException: Client version 3.5.5 PP20 is different than SCE version 0.0.0 PP0, therefore apply is not allowed
at com.pcube.apps.engage.policy.SEPolicyMediator.checkPpVersion(SEPolicyMediator.java:335)
at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:114)
at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:95)
at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:461)You are likely hitting CSCtb94072.
The policy file should be manipulated by development engineer.
Please open a case with TAC and ask the CSE to fix the policy (by getting development engineer assistance).
Once you have the fixed policy PQB file perform the following CLI procedure on all SCEs on which the problem was observed:
SCE2000>enable
Password:
SCE2000#cd engage
SCE2000#delete MYENGAGE.PQB
SCE2000#rename MYENGAG1.PQB MYENGAGE.PQB
SCE2000#
Once done you should be able to apply the fixed policy without any issue.
Note: after performing the above CLI procedure, you can also successfully retrieve the policy,
however, you must avoid doing it since the retrieved poilcy would not be the last applied one, it would be the penultimate one which you probably don't want to use.
After applying the fixed policy, you should be able to retrieve policy successfully with no fear.
====
This is more of a clarification regarding the workaround procedure:
To get you better understand the issue.
The last policy applied to the SCE successfully is kept under the SCE "/engage" directory by the name MYENGAGE.PQB
The penultimate applied policy is also kept there under the name MYENGAG1.PQB
When the SCA-BB GUI applies a policy it first verifies the matching SCA-BB and PP version by inspecting this MYENGAGE.PQB file.
If the file has the corruption dealt in this defect, the apply will fail with the message of the kind:
"Client version 3.5.5 PP18 is different than SCE version 0.0.0 PP0, therefore apply is not allowed"
The MYENGAG1.PQB is the penultimate applied policy and it's not corrupted, renaming it MYENGAGE.PQB will assure us that the apply operation won't fail when verifying the versions are matched.
Alternatively (for the renaming procedure) user may copy the fixed policy file into the SCE disk space under /engage directory and name it MYENGAGE.PQB, then the apply should also work fine. -
Spam messages and install a program to hear voice ...
Is anybody else getting spam messages over and over even if you have "blocked" and reported it as "Spam"? This morning I got another "same message" from v2098195567946. It is just one of many similar names from someone sending a Voice Message telling me to install a program. I get these over and over. Can't someone at Skype stop these spam messages? "Automated notification.... new video message recieved... to view video messages, install video player at viewin.com".
Yeah, right. Like I am about to install a program from that. Anybody else getting these?
Post transferred to create new topic;
subject/title edited accordingly.yes I also am receiving these
-
Back in May I installed and set up 10.4 (10.4.0) Server and published several (8 to be exact) calendars in iCal. They all published with no problems using WebDAV on the server, and 4 other machines were able to subscribe with no problems. Three of the machines were running Panther and the fourth runs Tiger. Last week I created a new calendar, published it, and am only able to subscribe on the machine running Tiger. The remaining three Panther machines sit with the status bar not moving (after clicking the Subscribe button) and do not subscribe. At one point I had let it try to subscribe for over an hour. I am forced to hit abort, which then just sits there, or cancel which does stop the process. I can only assume that a software update in either Panther (a security update or maybe iCal 1.5.5) or an update in Tiger has broken correct functionality. Has anyone else experienced what I'm describing?
After further troubleshooting, I discovered that one of my calendars had been corrupted. I discovered this when, on a Panther machine that I used to subscribe to this particular calendar, my alarms stopped functioning. In looking at the console log, I was seeing "2005-10-26 09:24:04.445 iCal[548] * -[NSCFString setTimeZone:]: selector not recognized
2005-10-26 09:24:04.445 iCal[548] Exception raised during posting of notification. Ignored. exception: * -[NSCFString setTimeZone:]: selector not recognized", and this would show up immediately upon subscribing to the corrupted calendar. When I deleted this calendar from the remote iCal, my alarms began functioning again, and subscribe worked on the balance of the calendars. I looked at all events in the corrupted calendar on the server, and discovered that some of the events had multiple alarms on them. I deleted the alarms for those events and added a new alarm, and republished. Everything began to work correctly including the alarms. Somehow, Tiger iCal seemed to be able to deal with the corrupted events, whereas Panther iCal could not. -
DHCP Security threats,Mitigation and Assessment
Hi,
I am doing networking project on DHCP security threats,Mitigation and assessment. I am including dhcp snooping ,am researching on Understanding DHCP communication,Security issues in DHCP protocol and communication,DHCPattacks,DHCP Starvation attack,Mitigating Attacks,DHCP Snooping,Port-Security,Recommended product,DHCPvulnerability assessment,Rogue DHCP Server detection,DHCP Starvation assessment.
Do anyone have better idea what else to include in this networking project.How to make it more better. do anyone have any document or any other resource where can i CAN get information about this project so that I can research little more.
thanksI'll try to cover as much as possible, as this should be posted in a security forum, and the security issues can go to very deep levels.
1. Users: need to have direct access to the exchange servers only from the internal network.
2. Anti-Virus on the server it's self and on all the users clients.
3. Using a front-end to publish the Exchange OWA and RPC over HTTPs to the outside (using ISA server)
4. Have a firewall (can be configured very specificaly to allow access only to what you need)
5. Have a Mail-Relay appliance to perform the initial anti-virus and anti-spam
6. If data leak is an issue, you can also install a DLP solution
I'm sure there is more, but those are the main things.
Yanir Ben-Nun / System Team Leader / IT / IS Professional -
Facebook Notifications and email notifications on ...
Hi
Is that possible Facebook Notifications and email notifications on sleeping screen nokia 808 like it had on N9..
On my 808 it shows only msgs and miscalls....any fix??
Thanksnot possible unless the app supports that behaviour. but email notifications and on notification lights has been broken on Symbian for a while, and as Symbian is in maintenance mode, is unlikely to see a fix, possibly ever.
-
Jabber and Voicemail Notifications
Hello guys!
Is it possible to receive voicemail notification on both jabber and desk phone at the same time? For example, if a user has a desk phone as primary extension on CUCM 8.6, the Unity use that extension for VM. But if the user has also a jabber client version 9.x for Windows and wants to receive voicemail on jabber, what is the best design option? Assign the same DN to both jabber and desk phone?
Also, I set up visual voicemail for jabber but left a voicemail in jabber and no notification appeared, where should i look into? The voicemail server and profile with users were added in CUP.
Note: The scenario is a BE6000 platform with CUCM8.6, CUCxN,8.6, CUP8.6 and CUPM8.6.
Thanks in advanced!Why would you have different extensions on desk phone vs. jabber? Normally this is not desired for user to manage 2 different numbers.
If however that is a requirement you can always define alternate extension on Unity Connection.
For VM configuration did you configure all the service in CUPS server, i.e. mailstore?
HTH,
Chris -
Emails and facebook notifications ...
Hi,
I've had my blackberry bold 9700 since the 11th June. Since then i've had troubles reciving emails and facebook notifications. Sometimes they come though but not for a good 15 mins - 1 hour and sometimes they don't even come through at all! does anyone know what i need to do? i tried a new hanset still didnt do it, rang o2 they dont know as all settings are right their end.. anyone? thanksSo you're not getting any data transfer to device, except when Google Maps is running?
-
Please suggest which function module is used for sending mail to responsible department in X1 and X2 notifications.
Kindly describe how this is set up.
rgrds
M.SIn addition above you can also explore
SO_NEW_DOCUMENT_ATT_SEND_API1
SO_NEW_DOCUMENT_SEND_API1
these will help you if you want to send mail to Outlook or external address.
or you can also create your own function module using these.
Maybe you are looking for
-
I've recently switched to an Android phone (Sony Xperia Z3) so have been keen to use Firefox Sync in order to have all my bookmarks in the Android version of Firefox, but it is proving to be easier said than done. I'm finding that some folders arrive
-
The application Safari quit unexpectedly...
I am unable to open Safari. Either it will open for a split second or will not open at all and give me the message - "the application Safari quit unexpectedly...It has been doing this for days. I have posted the report below. Please Help! Date/Time:
-
Error in selection screen variant saving .
Hi All , I have a selection screen with 4 radio buttons and some parameters , based on selection of the radio buttons the parameters change for input , now by default one radio button is selected and now if i try to save it and then when i try to hid
-
Any advice on how to remove the blackberry signature when sending e-mails from my blackberry device? I can see it but can't edit it in the e-mail setup area. Don't see an on/off in any options... Solved! Go to Solution.
-
All, a question regarding dbms_job.submit.. Is it necessary to commit after calling dbms_job.submit. My job seems to be running only after calling commit after submit (although i see and entry for that job in user_jobs). Is there any setting that nee