Scedule for triggering XI(BPM)

Hi,
My Scenario Database(JDBC)-- XI3.0--
SAP(RFC(synchronous))
Everyday Night once XI Trigger and fetch the data from JDBC and sends via RFC call to SAP and take the response and put the the Database via XI .So Here  I planned to use the BPM
I readed some below blogs and i found there is two ways to trigger the BPM in XI.,
/people/community.user/blog/2006/11/16/step-by-step-realize-your-bpm-scheduling-capability                -BPM Sceduling
/people/ganesh.karicharla2/blog/2008/02/08/periodic-scheduling-of-data-between-oracle-db-r3-system                -Periodic scheduled in JDBC
One way is for JDBC Adapter is sceduling dialy and another way is for call the client proxy and pass the dummy data to trigger the BPM( this is a BPM sceduling).
I am using XI 3.0 and Service Pack 20.Here my confusion is which way is going to do better way in the case of Future also.
In the blogs writes , If i done JDBC adpter schedule,in the future any Patches are updated any problems comes under this Schedule process?
Kindly suggest me your valuble updates it would be help me lot.
Thank you very much.
Sateesh

In the blogs writes , If i done JDBC adpter schedule,in the future any Patches are updated any problems comes under this
Schedule process?
You have to re-schedule in such a case.......i think (not sure) there is even a SAP note mentioning the same..if i get hold of it will post the same.
Is it possible to stop the during weekends and holidays via Adapter Sceduling?
Holidays not possible....weekends can be done...can take reference from my replies here: Re: Communication Channel Scheduling only on certain days
Regards,
Abhishek.

Similar Messages

  • Messages with Status "Scheduled" or "Sceduled for Outbound Processing"

    Hi All,
    When i run my interface, sxmb_moni shows the status of messages as "Scheduled" or "Sceduled for Outbound Processing".
    I know the reason and the problem gets resolved when I unlock the queues.
    But, is there a solution that I can resolve this completely? Reason being, everytime the interface is triggered, I have to unlock the queues. And if it is ccBPM scenario, I have to unlock multiple times, to acheive the flow completion
    Thanks,
    Swapna

    Hi,
    Check if u have set the value for monitor parameter QRFC_RESTART_ALLOWED to 1. default is 0.Also if your queues are registered in SMQR.Also checvk these reports
    · RSARFCSE: Restart an LUW (background job)
    · RSARFCEX: Restart tRFC LUWs (background job)
    · RSQOWKEX: Restart QOUT qRFC LUWs
    · RSQIWKEX: Restart QIN qRFC LUWs
    Thanks!
    Edited by: sudhir tiwari on Oct 10, 2008 12:19 PM

  • Report for triggering invoice

    Hi,
    Please let us know the name of the table which contains the record for invoices.
    Also The name of the progarm which is used for triggering the invoice and sales order in MM.
    Regards,
    Manu

    hi,
    check RBKP- incoming invoice booking in miro
    program: SAPLMR1M
    VBAK- table

  • How to add new attribute for triggering workflow?

    Dear Expert,
    I want to create condition for triggering workflow.
    I am working on travel request workflow, using BUS2089.
    my requirement is to differentiate or make condition of triggering workflow based on trip activity type,
    but I can't find any attribute about trip activity type.
    how to add activity type to be available for create condition?
    thanks

    Hi,
      If am not wrong you are trying to raise event when ever there is a new travel request raised, so the BOR would be availbel in the workflow container to be more preciese it would be available in the event container, so you need to find out the right attribute in the BOR where the trip type is assigned and validate this in the start conditions i mean in the basic data of the workflow where you activate the event linkage.
    Regards
    Pavan

  • How to use startscan signal for triggering for E-series DAQ

    Hi, I want to collect the engine cylinder pressure data with a PXI-6070E DAQ card and BEI Encoder. I want to use the TDC signal as trig1, and crank angle signal as startscan for triggering. Could anybody give me an example or suggestions about doing this in labview. I cannot find any example that uses startscan signal for trigging. Thanks.

    There is an example VI that is installed with LabVIEW. It is called "Cont Acq&Graph ExtScanClk D-Trig.vi" and it is located in the following LLB.
    \Examples\DAQ\anlogin\anlogin.llb
    Your project aligns very closely with a past project of mine. If you require professional expert assistance, feel free to call on us.
    Daniel L. Press
    Certified LabVIEW Developer
    PrimeTest Corp.
    www.primetest.com

  • Reg : change pointer mechanism for triggering the IDOC for delivery note

    Hi ,
    I am working on a change pointer mechanism for triggering the IDOC for delivery note and will be using this message class DESADV.
    So SAP has suggested for assigning the message class DESADV with the function module in MASTERIDOC_CREATE_SMD_DESADV in BD60 transaction code.
    So I was looking to create this MASTERIDOC_CREATE_SMD_DESADV function module in SAP and SAP suggesting that  we should create this MASTERIDOC_CREATE_SMD_DESADV function module as same as the function module MASTERIDOC_CREATE_SMD_MATMAS.
    So do anyone knows that is there any tool has been provided by SAP for creating this function module MASTERIDOC_CREATE_SMD_DESADV in SAP system for triggering the change pointer mechanism for outbound Delivery.
    Thanks !
    Regards,
    Kiran

    Hi,
    When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention.  If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen.  Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
    Thanks,
    Mahesh.

  • How to shorten delay for triggering Expose when holding click on dock icon?

    How do I shorten the delay for triggering Expose when holding a click on an application icon in the dock?

    Download and install the Secrets prefPane at http://secrets.blacktree.com/ Open it up and check the Dock->Springing delay setting. This is a SWAG, BTW.

  • Conditions for triggering actions - times in SLA

    Dear CRM experts,
    I'm configuring actions in SAP CRM 2007 - Service Scenario: in particular, I'm trying to configure actions for triggering of e-mails when SLA deadlines are reached.
    Let's assume that the following are the dates in my service ticket:
    Opening of the ticket --> 10/05/09 - 10:15 A.M.
    First level of escalation --> 10/05/09 - 02:15 P.M.
    To Do By --> 10/05/09 - 06:15 P.M.
    When I write the Starting Condition for the action, I can only compare the Date Types (Opening of the ticket , First level of escalation, To Do By ) with the Local Date of the System...
    The problem is that the condition considers only the DATE(10/05/09), but not the TIME!!
    But in our scenarios, the time is a critical parameter!
    Any idea on how to solve my problem?
    Thanks in advance,
    regards,
    Andrea Ricci

    Dear Andrea,
    I have similar requirement,Where as i have maintained the first respone as date type and in duration i have maintained 15 Min.
    Where as in action condition I have maintained Fisrt response<current date. Notification receipt as Todays date and time.
    Please guid me in details.
    Regards
    Ashwin

  • Does NetWeaver / XI suitable for a generic BPM package?

    Dears,
    We are focus on deliver BPM solution and service.  We are very interested in NetWeaver XI/BPM.  But would like to confirm the NetWeaver function is suitable for a generic BPM solution.  We are convinced that XI can do EAI/process integration very well, especially integrated to SAP.  But further more, We want to know if the XI can play a workflow role as well as Ultimus workflow.  For instance, organization management, security management, multi-level approval process, send alert/message/mail, workflow monitoring.
    Any comment would be very appreciated.

    No, at the moment it is possible to have an organization managment and approval process is not possible with BPM. However, the BPM process can be integrated with the SAP/non-SAP workflows in the application systems to enable the organization management and approval process.
    Sending of alerts/messages/mails and monitoring is suppoted by BPM.
    During configuration time a workflow template is generated for each BPM process develped in XI. So all the monitoring avaliable for workflow can be used to monitor the BPM process
    I am not sure of what do you mean by security management in BPM?
    -Sreekanrh

  • Prerequisites for SAP NW BPM implementation

    Hi All,
    Can you please let me know the prerequisites for SAP NW BPM implementation?
    Also,please let me know the phases in a SAP NW BPM implementation like requirement gathering and subsequent phases.
    Thanks in advance

    Hi,
    You can start with this document Step by Step Guide to SAP NetWeaver Business Process Management - Webinar Replay, and this simple example http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307336b8-098c-2d10-be9c-d41ae345f0ff?QuickLink=index&…
    Regards.

  • 11g equivalent for the oracle bpm 10g global interactive

    Hi,
    What is the 11g equivalent for the oracle bpm 10g global interactive activity?
    Thansk!

    The Initiator Task is the 11g equivalent to Global Interactive Activity.
    Find more information here
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15176/human_task_bpmpd.htm
    and here
    http://jamessmith73.wordpress.com/oracle-soa-bpm-11g/simple-bpm-task-initiator/

  • 'Send Aplication with Own transaction ' for triggering Output Type

    Hi All,
    Can anyone let me  know how the option 'Send Applicaion with own transaction'  for triggering output type works?
    Thanks in Advance,
    Savitha

    just F1 on the Dropdown list box, you get some help from there.

  • Flashback for triggers ?

    I have Windows XP with 10g 10.2.1.0
    Will flashback work for triggers ?
    Thanks

    Will flashback work for triggers ?yes, pl/sql is pl/sql

  • For triggering events

    Hi frnds ,
    I want to trigger events based on some conditions . i have created a subtype of my bus object . i will trigger my eveny using Funct. MOdule  BBP_EV_API_EVENTS_SAVE . This FM does triggers standard events . What i want to know is if i create my custom event i will fire it by using the same FM then will my event trigger or should any coding needs to be done inside the event in my custom bus object .
    Also is it always necessary that we have to do any coding inside the event for triggering it . Provided that we have done all the configurations in all the transactions like swec , swe2 .
    Thanks
    Rohit

    Hi Rohit,
    >
    ROHIT GUPTA wrote:
    > Also is it always necessary that we have to do any coding inside the event for triggering it . Provided that we have done all the configurations in all the transactions like swec , swe2 .
    You couldn't do any coding inside the event. You probably need to do some coding to trigger the event.
    Regards,
    Martin

  • Because it is better to use ADF for oracle SOA/BPM

    because it is better to use ADF for oracle SOA/BPM?
    TKY for your answers
    yango901

    Generally it is if you're comparing identical compressors & resolutions but there's something else happening here.  If you're worried about quality degrading; check the original file details on the camera (or card) either with Get Info or by opening in QuickTime and showing info. You should find the iPhoto version (reveal in a Finder) is a straight copy.  You can't really increase image quality of a movie (barring a few tricks) by increasing file size but Apple editing products create a more "scrub-able" intermediate file which is quite large.
    Good luck and happy editing.

Maybe you are looking for