Scehduling should be Fix for Only One Phase in Process order

Dear ....
                      I created Recipe having  5 phases with base qty of 5000 Kg.
Each havign differten machine HR . Now when i crated the Process order for 5000 kg then all timing get copied in schedulinng of Opeartion.
Now my requirement is that One of Phase is independant of Process order quanity.
So for this Phase i need same timing of 5000 kg, irrespective of process order qty.
If i created process order of 3000 kg , the timing of thi phase get reduce in scheduling.
I need to prevent the schedulling of this one phase irrespective or process order qty, wheather it wil increase or descerase scheduling of this phase should be same as per Reciepe.
Edited by: abhisappp on Dec 28, 2009 7:44 AM

ya..U r right actauly it was misatke..formula now corrected.
But whre should i used this formula..as I am having other Activities which i am using for other phases .
For this phases scheduling i am using scheduling formula as "Machine * Operation quantity / Base quantity / Operation splits".
As thre is only one field for formula..how should i assign this my Fixed Fomula in reosurce so that only one phase should be effective with  new formula.
Hopw u got my query..

Similar Messages

  • Changing DB character set for only one schema

    We are interested in changing the characterset of only one user from Western European to AL32UTF8.
    Could you please verify if the following steps will be correct to do the same.
    1. Run CSScan on the one user
    2. Fix any issues
    3. Export that one user (with NLS_LANG set to <your old database character set>)
    4. Create a new database in the AL32UTF8 character set
    5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)

    Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
    Database Character Set Scanner provide user scan mode
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
    Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
    because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size.

  • PDF file not generating for only one Invoice billing document

    Hi all,
    We have upgraded our system into ECC6.0 from 4.7 version. During our Testing time, we have found the following Bug:
    Bug: Not possible to get output in pdf format for only one  Invoice type(TR code: VF02) except for all it is generating PDF output.
    Can anybody help me out to find the route cause for this problem.
    Regards,
    Murali.

    Hi,
    For one Billing-Invoice type , PDF is not generating. But it is generating for other Invoices.
    So should i need to go through the Printer settings?
    Regards,
    Murali.

  • Program installed for only one user

    Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
    Thanks

    Select the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
    sudo chown -R root:admin
    Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
    This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences.

  • ChaRM scenario for only one productive system

    Hi CHaRM-experts!
    I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
    It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
    Does ChaRM support such case?
    Thank you very much!
    regards
    Thom

    Hi Don,
    thank you very much for your answer.
    No, I do not plan any transport in the productive system.
    I would just make any adminstrative changes without transport.
    Does ChaRM support such scenarios?
    Thank you!
    regards
    Thom

  • Skype not notifying (oange flash) for only one con...

    I've been having the issue of skype not giving me an orange flashing taskbar notification for only one of my contacts.
    Strangely, this does not always happen. Sometimes this contact's messages will in fact make my taskbar flash. Other times it will not. I can add that both the contact and I have our status on "online", furthermore I have checked the following suggestion I found here on the forums but it did not work as it was already properly set to always notify me:
    Highlight the contacts name in the Contacts list so you can see the chat window for this contact. Click on the Conversation menu and select Notification settings. Select there the appropriate option for the notifications.
    Any ideas? This has really been going on for at least a few months, perhaps a year

    Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
    most likely different configurations.
    You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
    Also for each check C:\Windows\System32\Macromed\Flash  Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
    If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
    It has been my experience to not "assume", but verify:-)
    Thanks,
    eidnolb

  • Configuring PPP options for only one VPN connection

    How do you configure PPP options for only one VPN connection that is using L2TP over IPSec? The built-in VPN client in 10.4.9 is failing authentication because it won't talk MSCHAP-V2 (this is the only authentication protocol I can use) with the server. I am able to establish a connection if I add the following to /etc/ppp/options:
    refuse-eap
    refuse-pap
    refuse-chap
    refuse-mschap
    require-mschap-v2
    However, these options will affect all PPP connections. The preference file that contains the network configurations (/Library/Preferences/SystemConfiguration/preferences.plist) also contains PPP options for each specific network service. After some searching around, I found that there are several keys that seem promising (MSCHAP2, etc.). But these keys take a string value and I have no clue what they should be. These keys are defined in SCSchemaDefinitions.h file.
    Any ideas?
      Mac OS X (10.4.9)  

    Hi Brian,
    I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
    So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
    I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
    The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
    Cheers,
    Günter

  • How can I correct that emails for only one of my address going direct to my trash file before even being read and this just started a while back not before?

    have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.

    thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.

  • Tacacs authentication fails for one user account for only one switch

    Hi,
    I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
    The same user account works well for other devices.
    The AAA configs are same on every devices in the network.
    Heres the show tacacs output from the switch where only one user account fails;
                  Socket opens:        157
                 Socket closes:        156
                 Socket aborts:        303
                 Socket errors:          1
               Socket Timeouts:          2
       Failed Connect Attempts:          0
            Total Packets Sent:       1703
            Total Packets Recv:       1243
              Expected Replies:          0
    What could be the reason ?
    No errors on ACS server; same rights had been given to the user account.
    Thanks to advise.
    Prasey

    Hi there,
    Does the user get authenticated in the ACS logs?
    reports and activity----> failed attempts
    ro
    reports and activity----->  passed authentications
    That will help narrow it down.
    Brad

  • Can I show a data label for only one point in a series?

    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
    If this can't be done, I guess that adding a text box over those points would work.
    Thanks

    Hi W-T,
    Welcome to Apple Discussions and the Numbers '09 forum.
    wahoo_tiger wrote:
    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    Sure. Here's and example labeling only the MIN and MAX points.
    Column B contains the data charted with the blue line.
    Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
    Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
    Regards,
    Barry

  • Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

    Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
    <Email Edited By Host>

    These are user-to-user forums - I've asked the hosts to remove your email address from your post.
    Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • EA2: Code is generated for only one column with Domain check constraint.

    I created a Domain with a Value List (Y or N - Yes or No) and used that domain for two columns in the same table. But for only one column (the last one) the check appears in the generated DDL.
    After I enabled the "Use Domain Constraints" both checks appear in the DDL, but one as an inline check constraint and one as an "Alter table add contraint.."
    Once I changed the naming Template for the check constraint, both constraints are generated as an Alter table clause. The inline check constraint is only generated when the name of the constraint (according to the template) is too long. It would be nice if I could choose if I want an inline or a separate check constraint definition.
    Edited by: Roel on Nov 23, 2010 11:55 AM
    Edited by: Roel on Nov 23, 2010 12:02 PM

    I logged ER for that
    Philip

  • Which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use it for hometheater and HD movies.

    which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.

    Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.

  • AA implement aaset value for only one depreciation area

    Hi,
    Is it possible change acquisition value of asset for only one depreciation area, the area 20 for example?
    By point of view of FI I can post the accounts of area 20 by  trx OASV,
    but in AA how can I do?
    If I use the trx AB01 the  acquisition value is modified in every area.
    Any assistance would be greatly appreciated.

    You upload the values in AM with the transaction AS91, this don't create postings in FI. It is possible to upload different values by depreciation area.
    With the transaction OASV you create manual the total postings in FI. An other option is to use the transaction  ABF1 (search on this forum with ABF1 how it is working)
    When an area post direct you have to use the transaction OASV (asset account is reconcilation accounts) for the other area you can use a standard FI posting.
    When you use AB01 you can create you own transaction type and limet them to one depreciation area or a group (tray to play with Tty 147, there you can fill in amounts by depreciation area.)

  • I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button -  it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

    I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button -  it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

    After posting my concern/question, especially in regards to the optical drive, I read this on this forum:
    Jul 11, 2011 5:21 AM      
    I would like to update my macbook pro from Tiger to Snow Leopard, but my optical drive is not working. Can I take my macbook pro into the apple store and have them install it via a portable drive?
    MacBook Pro, Optical drive is no longer working
    Another poster replied, "Yes, I believe they will."
    Is this true? Can someone verify this?  Any idea of cost?  I really don't need my optical drive.  Besides, end of year, I'm getting a new Mack Book Pro.

Maybe you are looking for