Scenario for interface between a non sap system and a SAP erp

Hello,
I need some help in order to elaborate a interface between a SAP ERP and a non-sap system with the help of a XI system.
   - At first regarding the interface from the non sap system and a SAP ERP :
       the non sap system sends a flat file to the XI system. The flat file contains a row with header data and rows with item data. We were thinking when the file arrives to the XI system, to save the data in a header database and in a items database in XI. is it possible ?
And then to have like a job that reads the database and creates idoc and sends them to the SAP erp and updates the xi header and items database with a flag that means that the records have been sent to the SAP erp.
   -   Regarding the interface SAP erp to non SAP system:
       the SAP erp sends idoc to XI. Then the idocs are transformed into flat file.
Is this scenario possible ?
Do we need any adaptator between the non sap system and the XI ?
Thank you for your help
Christophe

Hi Bontron,
Idoc doesnot support synchronous call. So you can use either proxy or function module and inturn call the idoc from them and send response back to xi. You need to have two scenarios for your design.
Scenario1: Source File (file adapter) -- xi -- Dump into database tables (Jdbc Adapter)
Scenrio2: Pickup form Database tables (Jdbc Adapter) -- xi -- RFC Adapter ---> This is synchronous call.
Regarding the interface SAP erp to non SAP system
You can send idoc to xi and from there use File adapter to send to the receiving system.
These blogs may help you to some extent:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
https://wiki.sdn.sap.com/wiki/display/XI/step%2bby%2bstep%2bRFC%2bto%2bJDBC%2bscenario (your scenario will be opposite to this)
Regards,
---Satish

Similar Messages

Interface between business ware house system and SAP SD module

hi,
I want to develop interface between business ware house system(file adapter) and SAP SD module. how can i post the data into SD system? can any one tell me which Idoc i should use in receiver side?
if i want to go abap proxy how can do it?
give some inputs(methods which i should use)
Thanks in advance
regards
Ruban

Hey
the selection of IDOC depends upon what you wanna post into SD.get in touch with the ABAP guys and they should be able to tell u exactly which IDOC to use.
once u have decided on IDOC,you can go for a File to IDOC scenario.
as far as proxies are concerned,they kinda give better performance compared to IDOC but you need to do ABAP coding for them,in that case u dont need any IDOC
Thanx
Aamir

Business scenairo for transfering data from Non Sourace system.

Hi everyone,
i am looking for sample business scenario for transferring data from non source system.
If the case study is for any Financial system that will be even great.
if any one has good Document Please Fwd it to e-mail [email protected]

hi rk,
what you means to say something source like flat file, not from r/3 side.
or
what exactly you want,plz explain?
regards,
San!
if helped,assign point!

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER

Hi Experts,
How the MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER?
Scenario : when 2nd system create the invoice,it will create a po in the 1st system.
51 error msg we are getting material does not exists.but the material is available in the receiving plant.
Please suggest

If you say the material master is available in the 1st system (where you create the order), then the material number in the IDOC may not match with the material number in your database.
leading zeros. material number stored as alphanumeris instead of numeric.

Need of XI to send an XML from one SAP system to another SAP system

Dear colleagues,
I work in the SRM solution.
In SRM there is a Purchaser and Supplier scenario called Supplier Self Services.
The Purchaser creates a Purchase order and sends it to the supplier in form of an XML file.
The purchaser system and supplier system are the same SAP system but different clients.
Example: Purchaser client is 300 and Supplier client is 330 and both of them are on the same system.
I have a very basic question.
Currently we have the XI system which acts as an interface to send the Purchaser PO XML to the Supplier as XML.
a)My question is in case the XML structure is identical across both the clients, then what is the need of XI system?
b) Is it not possible to send XML from one client to another without an XI system? there si no need of any message mapping required since I am expecting the same XML structure in both clients.
Please clarify the need of XI system in the following scenario. Is it not possible without XI?
Many thanks.
Best regards,
Srivatsa

Hi Srivatsa,
YOu can send the XML message from one sap system to another sap system even without an XI system in between.
But the use of SAP XI (Or any other middleware) is recommended because, it gives you the following advantages.
1) Better monitoring and alerting mechanism. XI provides you robust set of tools that let you monitor the status of the messages that are exchanged.
2) Direct communication between systems is referred to as Point to Point communication, which has its own disadvantages as against Hub and SPoke model (Message exchange using XI).
3) Message delivery is guaranteed if you have XI in between.
If the target system is down, the sender sap system will not try multiple times to post the message.
But if you use XI, it can be configured to send the message multiple times, till it succeeds.
Regards,
Ravi Kanth Talagana

Difference between Business service, Business system and Business process

Hi,
Can anyone tell me the difference between Business service, Business system and Business process?
Thanks,
Harikumar. S

Hi,
Business system
It is a logical system from a business point of view.
One or more logical systems that belong together from a business point of view is called a group of Business system group. A business system group represents a unit within a company or organization that can be defined according to legal, economic, administrative or geographic factors.
The objects in a business system group are uniquely identified by a uniform numbering system.
Business process
Business procedure within an enterprise that uses resources and can involve activites from a number of different cost centers in a controlling area.
When executing a business process, activities can be utilized for several cost centers of a controlling area.
Business service
Its a third party system.
All these belong to a Business Scenario which is
Description of the flow of business processes according to a business typology. A business scenario represents a template for a business process, which runs within a particular area of a company process. All processes required to completely process the task are listed in chronological order in the scenario. Business scenarios can be described graphically, in either aggregated or detailed form (EPC). Example: Direct sale to industrial recipient
**DO REWARD POINTS IF THIS IS HELPFUL FOR YOU**
Regards
AK

Move IDOC Configuration from one sap system to other sap system

Hi All,
I have a scenario where in we need to move the SAP Configuration including Port,partner funtions details etc to other Sap system .As per my knowledge we have some SAP Standard tables which stores all the SAP Config data .So my thought is that if we move those table entries from sorce sap system to target sap system the task will be completed however i dont know which table entries i need to move.Kindly suggest.
Venu

Many of these IDoc settings are not asking for transport requests, since they are considered master data (table class A). They are to be done directly in each system, because the are often linked to information that is or might be specific, like master data, logical system names, path names, etc...
Please also search for previous discussions, you are probably not the first one encountering this issue.
Thomas

Administration differences between an As Java system and an As ABAP system?

Hi, I'm not that familiar with SAP systems that are As Java based only, so apologies in advance if I ask real stupid questions here!!
Can someone please explain how one logs onto an As Java only system?... ie without the ABAP stack does one still use the SAP logon pad or am I getting confused here totally???
Also how does one do transports in an As Java system?
If you could send me a document that explains the main differences between an As ABAP system and an As Java system, particularly the differences in administrating these systems that would be very useful. My email address is [email protected]
Many thanks
Ash

Hi,
Can someone please explain how one logs onto an As Java only system?.
You can login through browser, use NetWeaver Administrator for most of your activities. There is also Visual Administrator/ Config tool etc these have seperate GUIs.
It would not be easy to list out the options but i suggest you read understand info from help regarding the details below so that you can administer Java servers:
Visual Administrator
NetWeaver Administrator
Config tool.
SDM
With the knowledge of the tools above you can start of administrating Java servers.
Also how does one do transports in an As Java system?
You install Portal on Java server and then do transports. You should be having a system administration role.
Please do a search in help.sap.com and you will find loads of data on WEBAS Java administration.
Thanks & regards,
Vijith

Compatibility issue between your power management system and Windows 8.1

I have purchased a new Lenovo Ideapad S410 and have this problem.
Compatibility issue between your power management system and Windows
It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
If you'd like to know more, you can search online later for this error:
VIDEO DXGKRNL FATAL ERROR
Please help! My laptop is only 5 days old.

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

Send mail from SAP system to another SAP system

Hello Xperts
I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
thkx
Prabhu
PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap system

Hi
To send mail Internally check this sample code it works fine this code was developed by me
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& ABAP/4 Consultant *
*& Name- Pavan Praveen Valluri Created on 26/07/2007 *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
* SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'@gujaratpetro.com'.
* Data: p_email(25) type c value '[email protected]'.
* END OF SELECTION SCREEN ------------------------------------------- *
*----------DATA DECLARATION--------------------------------------------*
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,
 gd_error type sy-subrc,
 gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
 BELNR LIKE BSEG-BELNR,
 ZUONR LIKE BSEG-ZUONR,
 GJAHR LIKE BSEG-GJAHR,
 DMBTR LIKE BSEG-DMBTR,
 HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
 TXT50 LIKE SKAT-TXT50,
 SAKNR LIKE SKAT-SAKNR,
 KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
 BELNR LIKE BKPF-BELNR,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
*-------- END OF DATA DECLARATION--------------------------------------*
*--- CONCATENATING AND ARRANGING DATE ---------------------------------*
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
*--- END OF CONCATENATING AND ARRANGING DATE -------------------------*
*-------------------------SELECTION FOR BSEG---------------------------*
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
 ZUONR = lv_formatdate.
*--------------END OF SSELECTION FOR BSEG--------------------------- *
*-------------------------SELECTION FOR BKPF---------------------------*
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
*------------------END OF SELECTION FOR BKPF---------------------------*
*-------------------------SELECTION FOR SKAT---------------------------*
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--------------END OF SSELECTION FOR SKAT--------------------------- *
*-----------------POPULATING EMAIL SUBJECT ----------------------------*
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
*------------END OF POPULATING EMAIL SUBJECT --------------------------*
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
** Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 object_header = t_object_header
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
 ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
 submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
 refresh it_message4.
*--------------- LOOP FOR BSEG -----------------------------------------
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
 GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*---CHANGING DATE FORMAT FOR BKPF---------------------------------------
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
*-------------POPULATING EMAIL BODY WITH DATA -------------------------
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
 into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
*------------END OF LOOP FOR BSEG --------------------------------------
endform. " POPULATE_EMAIL_MESSAGE_BODY

To send an mail with external attachment check this one

first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv

Then include that report in the following report and copy the same code and paste it there

*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
* Receivers
receiver_list-recextnam = '[email protected]'. "-->
* EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
* General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
* Mail subject
w_object_hd_change-objdes = 'Message subject'.
* Mail body
APPEND 'Message content' TO message_content.
* Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
Regards
Pavan

HT4145 is it possible to use a sngle air port express both for streaming music to an audio system AND as a wireless base station

is it possible to use a single air port express both for streaming music to an audio system AND as a wireless base station

Yes you can - if it is your only router or it is after another Apple router - if you have a non-Apple router then it would have to be hard wired to create its' own wireless network.

How to copy a structure from one SAP system to other SAP system in ABAP

Hi All,
We have a requriement where need to copy an strcture of 250 feilds from on SAP system to other SAP system , do any one know how to do it .
Regards
Channu

Channappa,
It is really not hard to manually create the structure. Ctrl-Y copy from the source system screen and paste in the target system screen. You'll have to do this one page at a time. So, you will have to repeat it 9 times (or 18 times if you have to copy/paste component list and type separately).
I can assure you that you can finish the task in less than 30 minutes.

Compatibility issue between your power management system and Windows,

Compatibility issue between your power management system and Windows, and my system is Lenovo ACPI-Compliant Virtual Power Controller.

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

Scenario for interface between a non sap system and a SAP erp

Similar Messages

Maybe you are looking for