Scenario help - grouping

hello,i have a scenario where i have division which has many business units which has many cost centers and profit centers. how can i group the whole thing? i want to show the highest level on my output screen and then user can drag in business units and cost centers from free characteristics. can someone give me ideas? thanks.

Hello,
From what i have understood:
DIVISION---one to many---BUSINESS UNITSone to many--
PROFIT CENTERS/COST CENTERS
Create a hierarchy in BI for the same. The same can then be used in for reporting.
Hope this helps!
Regards,
KunalG

Similar Messages

Self-Service Scenario Installation: Group PUBLIC not found

Hello All,
I am currently installing Self-Service Scenario using SAP Rapid installed SPS14 when I encountered an error at phase 76 out of 81.
Here is the java.exe.log
+ConfigMainExt state
TYPE=A STATE= INFO_SHORT=@info@ CONFIGURATION=TYPE=A STATE= INFO_SHORT=null - System SAP_ECC_Financials: Wed Nov 26 19:05:26 GMT+08:00 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to message server host failed
Connect_PM TYPE=B MSHOST=ncerpd01.nglcsl.com GROUP=PUBLIC R3NAME=E1D MSSERV=3901 PCS=1
ERROR Group PUBLIC not found
TIME Wed Nov 26 19:05:26 2008
RELEASE 700
COMPONENT LG
VERSION 5
RC -6
MODULE lgxx.c
LINE 4298
DETAIL LgIGroupX
COUNTER 2
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
com.sap.ctc.util.WDInternalConfigView.wdDoModifyView(WDInternalConfigView.java:157)
com.sap.ctc.util.wdp.InternalWDInternalConfigView.wdDoModifyView(InternalWDInternalConfigView.java:184)
com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
java.security.AccessController.doPrivileged(Native Method)
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) CONFIGURATION=+
I could not figure out how to configure the group PUBLIC or somehow change it to an existing group.
Your help is much appreciated.

I edited the logon group from SMLG and added PUBLIC there.
Restarted the connection and the configuration installation went through successfully.

Scenario Help: 5-6 Users...2 504 Phones

Hi everyone, i need some help with a scenario.
I have 5-6 staff that share two workstations in a factory to log on and check their email. they do this everyday. some staff are not always in, but usually there are atleast 3-4 of the 5-6.
I want each member to have their own extension, this way when they are not in the extension use SNR to ring on their mobiles.
What is the best way to put all the extensions on the two SPA-504 phones?
I dont like the idea of each user having to 'log in' to the phone... they are only at their desk for 10-20minutes at a time...if that.
Also Note i really use CCA...not a CLI user.
UC540 system with 8.6.1 Software Pack

Hi Jeremy,
Unfortunately you can only have SNR active on one extension per physical phone. So that isn't an option.
There are a couple of things you could do to get a similar scenario:
1)
Create a blast group for each user. Add the users extension to the blast group as well as an 'other number' of their cell phone. Then you can set the final location of the blast group to the users voicemail with 6XXX
XXX = [extension number]
2)
If you don't need voicemail you could just set the CFNA on the users extension to the users cell phone. To change this all you have to do is click on the extension in the phone page and there should be a Field for Call Forward No Answer.
Those are what I can currently think of to somewhat solve your issue. Let me know if you have any questions.
-Trent Good

Query Scenario Help - Average of Multiple Regions

Hi, I have a query scenario I can't create and I hope someone can help with.
The user inputs a sales Area and the report is to output the regions in that area and provide the Volume (easy) and the Average of all the presented regions. The problem is that the number of regions is dynamic so I don't know how to go about determining the average and making it constant across the regions. The user can also drill down on a region to present divisions and I would then need the average for the divisions this time instead of regions. Can you help?
Example 1
Input Sales Area 1000000
Region               1000001 1000002 1000003
Product1 Volume       100      120      105
Product1 Average      108      108      108
Product2 Volume       200      400      325
Product2 Average      308      308      308
Example 2
Input Sales Area 2000000
Region               2000001 2000002 2000003 2000004
Product1 Volume       100      120      105      180
Product1 Average      126      126      126      126
Product2 Volume       200      400      325      600
Product2 Average      381      381      381      381
To get this layout I have the following in the query builder:
The 2 Products are in a structue under Rows
The Key figures structure is also under Rows
The Region is under the columns

If you redesign the report slightly to move the "Average" to a column at the end of each row (which really makes more sense, IMHO), then the answer is easy. Just change the Suppress Results Row property to "Never" for Region, and change the Display Results As property to "Average" for Volume.
You could also make this same change to Division and/or any other free characteristic they might use as a drill-across in the report.
Hope this helps...
Bob

BC to PI to RFC / RFC to BC scenarios help

Hi
I have a scenarios to work on the Business Connector <> PI <> RFC (R/3) wise versa, I don't have any idea about the BC connectors. Please help on these with your experience and knowledge, like what I need to get from BC side for BC Receiver and BC sender Adapters(PI 7.0).
Thanks
Vasu

Hi Vasu,
SAP Business Connector:
The SAP Business Connector is a middleware product based on webMethods B2B Integration Server. It allows you to integrate with R/3 using open and non proprietary technology. SAP BC uses the Internet as communication platform and XML/HTML as data format. Thus it seamlessly integrates different IT architectures with R/3.
SAP BC allows for full bi-directional communication to and from R/3. On the one hand all SAP functionality accessible using BAPIs and IDocs can be made available to business partners over the Internet as secure XML-based services. On the other hand applications and information running on a remote web site can be instantly invoked by a simple SAP function call thus making the information of the Web available to an R/3 System.
SAP BC provides an XML layer on top of R/3 functionality so that other applications do not need any understanding of R/3 internal data structures or protocols. You can deploy SAP BC to simply but effectively achieve business-to-business integration between trading partners, thereby extending the reach of your SAP infrastructure to customers, partners and suppliers. Examples for applications may include real-time integration between supplier inventories and your SAP System or multi-vendor product, price and availability information and your purchasing application.
For further Information on the same see WHAT IS SAP BC ?
SAP XI:
SAP Exchange Infrastructure (XI) enables you to implement cross-system business processes. The aim of the Exchange Infrastructure is to integrate different versions of SAP and non-SAP systems implemented on different platforms (Java, ABAP, and so on). The Exchange Infrastructure is based on an open architecture, makes uses of open standards (in particular those from the XML and Java environments) and offers services that are essential in a heterogeneous and complex system landscape: Namely a runtime infrastructure for message exchange; configuration options for managing business processes and message flow; and options for transforming message contents between the sender and receiver systems.
Check the following links:
Also go through the following links:
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
https://websmp106.sap-ag.de/~sapdownload/011000358700005272252005E/BC2XIMig-RZ.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
/people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
Amaresh

Scenario Help - Problem in Return Flow from RFC

Dear Expert,
I am new to the XI development. we are on XI 7.0PI. In one of our scenario
we are pulling some info. from Sql database & post some documents in SAP via RFC. in this case RFC returns me the Document No. & some status from SAP which i am suppose to update back the same table row from where i have fetched this information. But the problem is the RFC does not return the Key value which i need to update the SQL table back.
How can i solve this problem without using BPM. I cannot change the RFC since it is not in my hand. ( So that RFC can take the Key Field of SQL & return the same back which i can use in my reverse Mapping. )
Any Global container which can hold this data from Forward Map which i can use in Reverse Map to update this SQL table.??
Pl. Help... Waiting for the reply.
Regards,
Umesh

Hi Sudheer,
From SAP Help,
This object enables you to cache the values that you want to read again when you next call any user-defined function in the same message mapping.
In this case, the mapping programs are different. So there is no way (to my knowledge) of using GC to solve this issue. If the issue has to be solved from XI, my soln would be opting for a lookup in request and response mapping. In request mapping store the keyfield value and in response mapping, retrieve the same. Ofcourse this is not a much recommended way by SAP.
A cleaner soln would be to develop a wrapper RFC (if the original RFC can not be changed) that returns the keyfield value along with the status.
Regards,
Jai Shankar

BPM scenario help

Hello All,
              Here i am new to BPM. But here i got a scenario which involves BPM. can any one help me in the integration process logic for
            one sender interface and multiple interfaces. only one sender and one receiver.
please dont tell that we need not go for BPM . we can use multimapping without BPM. in my case i am going to use the proxies to post data to R/3. where as it is not possible for multimapping when we use XI adapter. please help me in this scenario.
           sender side :: one file server, one interface, file adapter.
        receiver side::::: one R/3 server, three interfaces, XI adapter.
please give me the logical diagram if possible . else atleast describe the logic to use in integration process.
pleaseeeeeeee help me in this scenario.
thanks in advance to all.

Here you go,i:N with BPM
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanx
Aamir

Please Help| group policy site failure

hey all, i have some big problem in my network.
i have 3 site named by city.
tel aviv-server 2012
beer sheva-server 2008r2
netanya-server 2008 r2
i crete gpo(computer management) that deny access to mmc.exe
computer management--->windows settings--->securtiy--->file system
and add---> %systemroot%/system32/mmc.exe and deny access to user.
now i go to check the gpo in client side with gpresult /scope computer /r and see that some computers in tel aviv site connected to netanya/beer sheva site.
what can i do ?
i have a situation that not matter what i do i cant release mmc.exe to users.

Hi eranvak,
Before going further, would you please let me confirm something more? Would you please descript how you configure
the group policy summarily? For example, when you create the GPO, where the GPO link to? Did you directly link GPO to the default Domain? Or in GPMC, right click the site and select
Link an Existing GPO…? Or any other I misunderstand, please feel free to let me know.
In addition, you descript “enable the inheritance option”, did you mean that just uncheck
Block Inheritance option?
Sorry for my confusion. Thanks for your understanding.
There are two articles for Group Policy Inheritance. Please refer to.
Group Policy Inheritance
http://technet.microsoft.com/en-us/library/cc739343(v=ws.10).aspx
Managing inheritance of Group Policy
http://technet.microsoft.com/en-us/library/cc757050(v=ws.10).aspx
Hope this helps.
Best regards,
Justin Gu

Query help - group by

Hi all,
I need to get the sum(sal) and sum(comm) using select query..
I am using group by..but unable to get the result..
For example..if the table is
eno     ename     job     sal      comm     deptno
1234     john     manager     2000 1     10
1235     andrew     salesman     1000     2     20
1236     steven     manager     2000 3     20
1237     robert     clerk      600     4     10
1238     laura     manager     2000      5     20
1239     dan     salesman     500     6     30
1240     james     clerk     500     7     10
I need to display all the columns by select query and the result should be as follows:
eno     ename     job     sal     comm     deptno     sum(sal)     sum(comm)
1234     john     manager     2000     1     10     6000     9
1235     andrew     salesman     1000     2     20     1500      8
1236     steven     manager     2000     3     20     6000      9
1237     robert     clerk     600     4     10     1100     11
1238     laura      manager     2000     5     20     6000      9
1239     dan      salesman     500     6     30     1500      8
1240     james      clerk     500     7     10     1100     11
I appreciate your help...thanks !

Use anaytic SUM:
SQL> select empno,
2          ename,
3          job,
4          sal,
5          comm,
6          deptno,
7          sum(sal) over(partition by deptno) sum_sal,
8          sum(comm) over(partition by deptno) sum_comm
9    from emp
10 /
     EMPNO ENAME      JOB              SAL       COMM     DEPTNO    SUM_SAL   SUM_COMM
      7782 CLARK      MANAGER         2450                    10       8750
      7839 KING       PRESIDENT       5000                    10       8750
      7934 MILLER     CLERK           1300                    10       8750
      7566 JONES      MANAGER         2975                    20      10875
      7902 FORD       ANALYST         3000                    20      10875
      7876 ADAMS      CLERK           1100                    20      10875
      7369 SMITH      CLERK            800                    20      10875
      7788 SCOTT      ANALYST         3000                    20      10875
      7521 WARD       SALESMAN        1250        500         30       9400       2200
      7844 TURNER     SALESMAN        1500          0         30       9400       2200
      7499 ALLEN      SALESMAN        1600        300         30       9400       2200
     EMPNO ENAME      JOB              SAL       COMM     DEPTNO    SUM_SAL   SUM_COMM
      7900 JAMES      CLERK            950                    30       9400       2200
      7698 BLAKE      MANAGER         2850                    30       9400       2200
      7654 MARTIN     SALESMAN        1250       1400         30       9400       2200
14 rows selected.
SQL> SY.

Proxies to jdbc scenario help...!

Dear All,
I am very new to XI , can anyone guide me step by step process for
1. File to webservice scenario via xi
2. Proxies to jdbc scenario via xi
3.IDOC to JDBC scenario via xi
will be much helpful as i need to complete these processes very soon.
Thanks in Advance.

HI,
Here are the documents:
Webservice scenario:
these 3 documents should explain it all,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
troubleshooting SOAP:
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
IDOC and JDBC Scenarios:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters --> For Idoc sender: IDOC -file
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
IDOC configuration :
Refer the help:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi - ALE settings for R3-XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Idoc to File:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
This is expalined both the scenarios:
Please follow the below process for configuration:
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Pre-requisites for Outbound IDoc from R/3 to PI:
Configurations required in R/3:
Maintain Logical System (SALE)
Define RFC Destination (SM59) which points to PI system
Maintain Port (WE21)
Maintain partner profile. (WE20):
Maintain Distribution Model (BD64):
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
Writing Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
Proxy:
Client Proxy:
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Server Proxy:
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Smarter Approach for coding ABAP Proxies
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
File to Inbound Proxy:
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Debugging Inbound Proxy:
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Thanks and Regards,
Chirag Gohil

Soap- XI- RFC- DB BPM scenario help

Hi,
I want to implement a scenario like this. a third party system use the soap adapter to call the ECC RFC via XI.and i want to write the RFC response into another DB using the jdbc adapter.after that i want to send back the DB update_insert result to soap client (third party system).so the scenario looks like this
soap request->XI->RFC
|
soap response <---DB
i want to use BPM,but have not too much experience.appreciate your help.
Regards
xiaofeng

Hi,
This will be a Synch Asycnh Scenario and you will need a BPM with a SYNCH ASYNCH bridge.
Steps :
1. Receiver Request Message from SOAP -- Open SA Bridge
2. Send Syunchronous -- To call RFC and get Response
3. Send Synchronous -- TO send data to JDBC and get response
4. Send -- TO send data back to SOAP -- Close SA Bridge.
You will have to do the corresponding message mapping , etc.
Take a look at the SAP BASIS Component -- Patterns -- Synch Asycnch pattern and this link for more info,
http://help.sap.com/saphelp_nw04/helpdata/en/43/65d4dab39b0398e10000000a1553f6/content.htm
Regards,
Bhavesh

Data Load scenario- help needed

Hi gurus,
Please help me with the below scenarios for the LO mechanism:
Rec 1 entered in R3 between T1 and T2 (during R3 setup table population). When does Rec1 get into BW?
Rec 2 entered in R3 between T2 and T3 (after setup table population but before initialization loads). When does Rec 2 get into BW?
Rec 3 entered in R3 between T3 and T4 (during initial loads in BW). When does Rec 3 get into BW?
Rec 4 entered in R3 after initialization is completed after T4. When does Rec 4 get into BW?
Time
T1                                          T2    T3                                                                               T4
|--|---||--
       Rec 1                                Rec2                                   Rec 3                                                   Rec 4
T1 T2 Setup Tables populated
T3 T4 Initial Loads performed
T4 onwards Delta Loads performed

Hi ,
senario1;Rec 1 entered in R3 between T1 and T2 (during R3 setup table population). When does Rec1 get into BW?
during the setup table filling ,v3 jobs will be descheduled
you need to lock all the user's (no user can post documents)
Rec 2 entered in R3 between T2 and T3 (after setup table population but before initialization loads). When does Rec 2 get into BW?
here just setup table is filled,however init is not performed
so still v3 jobs will be in descheduled mode ,the posting which were/are happened sits in application tables
Rec 3 entered in R3 between T3 and T4 (during initial loads in BW). When does Rec 3 get into BW
here init is running,it will be down time for R/3 due to heavy load processing to BW
so still v3 jobs will be in descheduled mode ,the posting which were/are happened still sits in application tables
Rec 4 entered in R3 after initialization is completed after T4. When does Rec 4 get into BW?
after init,now we need to schedule v3 jobs, so all the postings(which were posted earlier/which are posted for the moment) now will transfer from application tables to delta que depending on the update mode(direct/queued/un serialized)
Hope this helps you!!!!!!!
cheers,
Swapna.G
Message was edited by:
        swapna gollakota
Message was edited by:
        swapna gollakota

Sales Forecast Scenario - help needed

Dear Experts
I need your help in following forecast scenario:
I am have two planning areas, one for actuals and other for planning (The cube structure are similar). The forcast function is written at material and month level in mutiplanning area. I have created a new planning version LE2 by copying actuals for first six months of 2008.
I like to generate forecast for next six months in this plannng version. by using reference data from actuals planning area with version # and period 01.2007 to 06.2008. I am using Automatic Forecast Method as the strategy.
I have restricted the calmonth characteristic in the package as 07.2008 to 12.2008. The fields for reference in the function has calmonth from 01.2007 to 06.2008 and # as version and planning area = planned. Field for condition has version # and planned as planning area.
I have following issues:
The function is using refrence data from 01.2007 to 12.2007 and not up to 06.2008?
Proposing values for version # and actuals planning area insted of LE3 version and Planned planning area.
Please guide.
Best Regards
Shahid

Hi
There is a correction in my previous mail. The planning area in reference data is set to actuals.
Best Regards
Shahid

Critical Scenario - Help Needed

Hi Gurus,
Scenario:
1) I have a table control with 2 radio buttons, 7 columns and 1 column of push buttons.
2) On click of radio button 2, the push button gets enabled and on click of the push button, a pop-up
screen comes up.
3) After entering data on the pop-up screen, control should come back to the main screen and whatever
data the user has entered should get displayed.
4) Now say user has entered 7 rows of data by repeating the above process. Suddenly, the user wants to
see what he entered in the first row's pop-up, then the user has to press the first row's push button in order
to see what he had entered in the pop-up.
My Problem is with the 4th Point, how can I achieve this.
Challenges I am facing: Even though I am clicking the 5th row's push button, it is showing me the 1st row's
data.
The Pop-up screen's values should change row wise depending on the data.
Please help me out, this issue is eating me up.
Thanks
Chandan

dont u go thru all the reply given to ur issue ......
again & again ur asking the same thing....
*screen 100
data: l_function like sy-ucomm,
        l_lin      type sy-stepl.
clear: ok_code,l_function,error.
ok_code = sy-ucomm.
l_function = ok_code.
if l_function(2) = 'BU'.
    clear l_lin.
    l_lin = gt_cat09-top_line + l_function+2(2) - 1.
   read itab into ls_itab index l_line.--->current line. basedon conditions u can call popup message.
    perform get_relations.
    if gt_cat06[] is initial.
      perform display_popup.--->pop up select options.
    else.
     saved = 'X'.
    endif.
    if error ne 'X'.
      call screen '0101'.-->i'm calling another screen.
    endif.
endif. case ok_code.
    when 'SAVE'.
    when 'DELE'.
    when others.
endcase.
regards
Prabhu

A2A Integration Scenario help

Hi,
Iam configuring the scenario such way that deals with adapters Idoc & File. Scenario deals with idoc to file. I configured such way that Service with pary i.e. Sender Party & Sender Business System Service & Receiver Party & Receiver Business system service. All the configuration done as per the requirements. But I am getting the error syaing "receiver not found". When I tried the same with service with out party it is working fine. Can anybody help in this reagard. Appreciate for your reply.
Thanks,
Mallikarjun.M

Hi,
The PARTY is used to B2B integration. As you are doing an A2A integration, you do not need party for your objects.
Take a look at this article too,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660">how to sample IDOC scenarios.</a>
Regards,
Bhavesh

Scenario help - grouping

Similar Messages

Maybe you are looking for