Scenario IDOC - PI - RNIF
Hi Experts,
Can anybody send me the steps involved in idoc - rnif rosettanet the recever elemica gateway.
Wat is PIP (partner interface process)?
Wat is the use of PIP to the above scenario?
Thanks
Edited by: Raja Mohamed Ibrahim on Nov 20, 2009 8:26 AM
I would suggest you refer these two threads:
For scenarios involving RNIF & to know what is PIP: rosettanet pip
And this for a quick overview of how PIP is related to rnif: partner interface process (pip) in BPM
Regards,
Abhishek.
Similar Messages
-
XML Payload with attachment idoc to rnif
Hi Experts,
I am doing the scenario Idoc to RNIF. i have to pick up some1234 .pdf , fieldticket.pdf files and attached to the xml payload of out put and send it to the customers. How can we do this. please any one help me. If you have any documents please send me.Anyone working/worked with RNIF adapter would like to share their experience.
-
Hi ,
I am trying to implement an idoc to RNIF scenario. Please help me to know how to configure it. I have loaded the Rosetanet package in Integration repository . How should I proceed further
Thanks in advance,
HemanthikaHi
The RNIF 2.0 protocol provides measures to enforce the following security aspects, authentication, authorization, confidentiality and message integrity
do chk this links
http://help.sap.com/saphelp_nw04/helpdata/en/01/15fc3f0ac2c642e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e08a2bc6-e76e-2910-69ae-d7c30c8d8505
Regards
Abhishek -
Party in a scenario IDoc -- XI -- File.?
Hi folks,
I have a scenario IDoc <> XI <> File. Some IDOCs are LS, KU and LI type. Do I need a XI party to configure this scenario?
Thanks in advance,
Ricardo.Thanks for the quick answers
Remember that I also have File -> XI -> IDoc.
But, I still don't understand how SAP backend can distinguish the same IDOC for different partner types, ex. ORDERS05 type LS and/or KU. When the IDoc arrives the backend how it knows which type of IDoc is dealing?
Cheers,
Ricardo. -
Idoc to RNIF with pdf attachment
Hi
I am implementing a Idoc to RNIF with pdf attachment. I have to pick the pdf file from an ftp server in PI based on the invoice number in the idoc. I could not find a blog or documentation on how to attach the pdf file. The only viable solution I found is to create a module in this forum [Re: Using attachment with RNIF|Re: Using attachment with RNIF] Has anybody implemented this in any other way? Also, in this solution its not clear how both the messages and pdf file are reaching the rnif adapter together.
Can somebody give a step by step solution?
I am on PI 7.1 Ehp1
Thanks in advance
AsifAnyone working/worked with RNIF adapter would like to share their experience.
-
Can you plz tell m how to write Design Strategy in the scenario IDoc-- File
Hi,
can any body plz tell me how to write Design strategy, Preprocessing logic and post processing logic in the scenario IDoc-->File.
My idoc is:
Message Type: ZMMIPORDCHG
Basic Type : ORDERS05.
lookup's are available.Hi,
take a look at this document for an IDOC to IDOC Scenario,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Use it as a template to design one side of the Interface and also take a look at this blog,
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards,
Bhavesh -
Hi experts,
i've scenario IDOC to JDBC:
the interface receive two idoc's:
IDOC1: 1field1, 1field2, 1field3
IDOC2: 2field1, 2field2, 2field3
and give the data to only one table in the receiver, ie, the table is equally filled by the contents of both idocs,
the data in this table must be storage by follow:
field -> field1 field2 field3
values -> 1field1 1field2 1field3
2field1 2 field2 2 field3
¿how can i do this whe i realize the mapping ?
¿Is it possible, or it's better to use two interface, one for each idoc?
very thanksIf both the idocs are of same basic type, then you may perform Idoc packaging at the sender side. Due to this you could receive idoc at XI with multiple Idoc nodes having data from different idocs. Then you may map directly till node level and achieve the output.
If the type of idocs are different, use two interfaces or go for BPM to collect.
Regards,
Prateek -
Scenario Idoc -- JMS (Debmas -- Basis)
Hi everybody.
I have to develop a scenario idoc debmas --> jms wiht version 7.0.
I´ve never worked with jms and I´d like to know how I have to build the messages. ¿Does any external definition exist to work with customer data with jms or I´ll have to create my own data type, message type and message interface with a determinate structure??
Regards and thanks a lot.Hi,
In addition to Prateek's reply I would like to add below mentioned point.
Your secnario is IDOC --->JMS but JMS will be sending the data to some third party (legacy system). So try to filnd out what format is needed at legacy side. Once you know the structure required by legacy system then you can create the same data type in XI to deliver the message to JMS.
Regards,
Sarvesh -
Hi Experts,
Currently i am working on invoice idoc to JDBC(synchronous) to rnif. could you please help me the steps. depending on the bill to or soldto or plant i have to get the 14 fields from sql server and send it to the RNIF adapter. could you please send me the steps for this scenario. using BPM.
Advanced Thanks
Regards
SundherHi,
In BPM: without mapping lookup , but with Sync JDBC call
1) Receive Step to receive the Idoc message
2) Call the JDBC synchronously
3). Map the Response to RNIF Receiver Message
4) Send the Message to RNIF
You can make the Sync. Mapping i,e Mapping between Idoc message to JDBC call and JDBC Response to RNIF outside the BPM..
Check out this blog-/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
btw, what is the volume of data? based on that, you can decide to choose, mapping lookup or Sync JDBC call with BPM
Rgds,
Moorthy -
Scenario - IDoc - XI - RFC - IDoc
Hi Experts,
I am new to BPM.
We have 2 sap systems...SAP1, SAP2.
The BPM scenario is,
When Material changes made in MM02 of SAP1, changepointers creates an IDoc1. IDoc1 is first sent to XI. Now in SAP2, it is to be checked whether that particular changed in SAP1 exists in SAP2 or not. For this, from XI an RFC call is made to SAP2, depending on the return values, the IDoc message that has been reached to XI (from SAP1) is sent to SAP2.
How to achieve this.
Any docs, links would help me. I am very new to BPM.
-Naveen.Hi,
<i>Can any one give me some direction.</i>
>>>Are you talking about BPM steps ? if so I have given that.
For Message Interfaces-
1) Abs, Async, Message Interface of type Idoc
2) Abs, Sync, Message Interface of type RFC
3) Abs, Async Message Interface of type Idoc , which is sending to SAP2 system. If you have mapping changes.
Mapping is outside the BPM, Create a dummy message type for RFC response. To check the response in the BPM
i.e Idoc to RFC Req Mapping
RFC Response to Dummy RFC response
Hope this helps,
Regards,
Moorthy -
Scenario: Idoc - XI - external system (Idoc)
Hello,
I am trying to send an idoc from an sap 4.6c system to an external system. The external system is supporting idcos with trfc. This scenario is currently working with ALE. Now i have to set XI between these two systems.
My problem is to set up the communication channel in the integration builder (configuration) for the external system. The idoc is waitung in XI to transport. So the step XI-> external system causing problems.
My settings are:
adapter type: idoc
transport protocol: idoc
message protocol: idoc
adapter engine: integration engine
rfc destination: xyz (is working fine)
interface version: sap release 4.0 or higher
port: ??
sap release 46c
My problem is the port. should i set up a port in idx1? But the external system is not an sap system and so i dont have a client.
In XI i have defined a port in transaction we21 (transactional rfc) for the external system with rfc destination xyz. But if i enter that port in communication channel i got error messages.
Thanks for any help.Hi christian,
i'm also working in IDOC scenario between ECC to XI to MDM, if u have any document or snapshot then pls fwd it to me.
[email protected]
Thanks,
Jitendra -
Issues in IDoc Sender Scenario:IDoc with errors added
Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
ChilankaHi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
IDoc- XI scenario (IDoc should be sent by XI client 500)
Hi,
I'd like to set up a scenario mentioned in the subject. As a source SAP system I'd like to use XI client 500. XI client 100 is used as Integration Engine. How can I generate some IDoc from the source SAP system (XI cl 500) to import it into the repository?
Or do I have to use the R/3 as the source system?
Do you know some helpful links about the IDoc creation and so on?
Thanx, PeterHi Peter,
To import idocs in the IR, you need to perform the followinf steps:
1) In a SWCV you have a field Imported objects, right click on the link which then shows import of import of SAP objects, please click on that.
2) A window appears which for <b>Application Server, Systenm number, Username and Password.</b> Please check the system name and its client before moving further. It should be XIserver and client--500 in your case. If it's not there then double click on your SWCV and change it.
3) Enter the values in these fields, for example system number would be the same as it is given in the SAP logon window.
3) Here you can see links for IDOCs and RFCs and you can import the IDOC you want.
Hope this solves your problem.
Thanks and Regards,
Varun Joshi -
Sender Communication Channel for Integration Scenario IDoc - XI - IDoc?
Hello All,
One general question. I have to configure an IDoc - XI - IDoc Scenario. For this Scenario I have to configure an Receiver Communication Channel (IDoc Adapter) to the Backend System but what about Sending Communication Channel for the Sending R/3 system.
Is the (IDoc) Communication Channel from Sending system to XI required to configured?
Many thanks in advanced!
JochenHi Jochen,
for sending IDOCs from SAP to XI, sender IDOC adapter is not required. when XI will send the IDOC to a SAP system, then receiver IDOC adapter is needed.
Thanks,
Rajeev Gupta -
Problem with IDoc scenario - IDocs do not aarive to XI
Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM
Maybe you are looking for
-
Update mac os*10.6.8 to os 10.9.0
Required new version Mac OS*10.9.4 now OS*10.6.8
-
Application Builder Create Page Wizard... huh?
I just tried this wizard to create a wizard. I assumed the wizard would look like the Apex wizards with a "step" ladder. The Wizard wizard seems to create pages, next, previous, and cancel button and not much else. I tried creating it using tabs, jus
-
HT204266 How do I fix my home button?
When I click my home button onmy iPod touch it doesn't work. I have to hold it in for multiple minutes, and most the time it still doesn't work. How do I fix it so it is back to normal?
-
How to set weblogic 8.1SP4 not generated a EAR file; just leave ear folder
Could anyone please tell me how to configurate weblogic 8.1? Thanks.
-
Steps For Updating the IDOC Status using ALEAUD
Hi all, My Scenario is : R/3(IDOC)--> Legacy System(File).After the IDOC is received successfully on the Receiver System.I should Update the Status of IDOC on the Sender System. Can anyone help me out : What all the Steps & Configurations involved f