Scenario is file-pi-soap

Hi All..
I am receiving a zip file coming from Mercator in zip format and this will be at source side and i need to read the contents and send to Web Services using SOAP adapter..
The structure of the web service call is the following where the file populates the <Content> tag.
regards,
Kishore.

Thanks for the replies
after this messages all the messages are processed successfully. so it seems that no url and authentication problem for this.
pls guide me how to resolve this issue.
Robin

Similar Messages

Issue in File to SOAP as Attachment

Hi,
I have scenario from File to SOAP.
I ma to send two files one file as content of SOAP request and other one as file attachment. The problem is i cannot send message both file content and file attachment.
Because when i select the "keep attachment" in the SOAP adapter both content and attachment become attachment, but if i didn't tick, only content is display by the recipient without the attachment.
How can i configure SOAP adapter so the recipient can receive both content file and attachment file.
Solution will be rewarded
Thanks
Jaideep Baid

hi gaurav,
   actually my SOAP payload will be a file only but I wnat to send till a perticular node as a SOAP payload and rest part as an attachment.
like
message----Root node
      field 1
      field 2
      field 3
         subfield 1
         subfield 2
         subfield 3
         subfield 4
SO i want till field2 it should go as payload and from field 3 i should go as attachment.
OR i can make two files of different name.
file1's content
   field 1
   field 2
file2's content
    field 3
         subfield 1
         subfield 2
         subfield 3
         subfield 4
Now in this case file 1 should go as SOAP payload and File2 as attachment.
So that In XI i can see two different file one named as mainDocument and other one name as Attachment.
Plzz suggest any solution
Thanks
Jaideep jain

File To SOAP

Hi,
I am trying out a scenario from file<>BPM<>SOAP.
In the Call Adapter step I am getting the following error message:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is not used by any processes</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The Message is successfully reaching BPM but then the error occurs.
Please help me in this regards.
Thanks,
Abhishek.

Hi,
check these
1. Go to Transaction: SXI_CACHE and check the return code for your intergration process, it must be 0.
Might solve your issue
2. In MONI click on PE (you will find this when you scroll towards right). Now navigate like this Goto ---> Graphical workflow log. Check in which step there is a error (it will be in red colour lines).
3.Can u check whether the interface used in Sender agreement is the same as the interface used in Receiver Determination, whose receiver is BPM?
4.Check the receiver determination for file to BPM. The file message that enters the BPM i think is not able to find the receiver.
Try one more things. In your BPM, try a f7 and see if there is any syntax errors.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

How many Receiver determination in File to SOAP scenario

Hi,
I am trying a File -SOAP-File scenario, where file will be send to PI asynchronous. BPM is configured to receive the file and
call the web services and get the response (Synchronous call) .After that BPM send the file asynchronous to File via FTP .
It is basically asynchronous/ Synchronous bridge scenario.
To do this I have have configured the BPM & created 3 Communication channel . 1 sender (File) & 2 receivers ( SOAP & File)
But i got confused in Receiver determination. How many Receiver determinations do we require in this step? 2 or 3. If 3 how they will look like. I believe Interface determination is same as Receiver determination. I am suing Business System to send & recv the file.
Points will be rewarded for suitable answer.
Thanks

hi,
You require 3 receiver determinations.
one from File to BPM(XI)..
another from BPM to SOAP and other from SOAP to FILE.
This is exactly the same scenario.
RFC Scenario using BPM --Starter Kit
Thanks,
Vijaya

Error handling in File - XI - SOAP scenario without BPM

Hello!
We have a File -> XI -> SOAP scenario without BPM. The problem is that if the Web Service sends back an error XI tries to reprocess the same message again and again instead of taking the next one.
We do not want set the retry interval to NULL because most error cases are temporary connection problems and then also those messages would not automatically be reprocessed any more.
We also have to use BE instead of EO, otherwise the Web Service will not return a response. But we need the response to be sure that the processing was successful. The message volume in this scenario is quite high and we do not want to use BPM only for the error handling.
I know that from SP19 some additional adapter modules are available for async - sync scenarios without BPM. I tried to configure it like described in File - RFC - File without a BPM - Possible from SP 19. but it did not solve the problem. Does anybody have any other ideas? Thanks.
Regards, Tanja

Hi Tanja,
>>>The volume is 3000 messages/day on business days and 700 messages/day during weekends but the traffic will increase in the future
I think, you should check that out. It is assumedly only 2 days work to build a scenario:
IDoc -> BP
BP <-> SOAP/HTTP
BP -> IDoc (Acknowledgement)
In the process you need a condition branch, where you decide success or not. You need 2 Interface Mappings for filling the ALEAUD.
Just send 1000 IDocs to the Test-XI and look to performance monitoring at Runtime Workbench, to find out, how many message will be processed in one hour. Assumedly 3000 and more per day should be possible. The advantage would be to reduce number of systems (no file system) and messages (better monitoring) and using the standard (better maintenance).
>>>So you are suggesting I should use HTTP adapter and then add the SOAP header manually in a mapping?
Yes, build the SOAP envelop during the mapping. Most easy is to use XSL or, if your mapping is ready, an additionsal XSL. You can put the error into the Acknowledgement to see it in ERP transaction WE02.
Filling of ALEAUD fields:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
I ve done such a scenario several times. That works without any problems.
Regards,
Udo

File-To-SOAP Scenario

Hi,
I am trying to do one of the End-To-End scenarios which are described in the following document published by Mukeshlal Parida https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
Since I don't know how to use the SAP html client I decided to use a file adapter instead of a http adapter (HTML To Web Service Scenario). I used a similar file adapter with the same settings in another scenario and it worked. But with my new scenario the file adapter doesn't collect the specified file. The only difference between the two scenarios is that I am using business services now instead of business systems. What am I doing wrong?
I would appreciate any help!!!
Kind regards,
Marc
setup a simple scenario using a file adapter which collects

Thank you Moorthy for the hint with the sender agreement. The file adapter is now working correctly. Unfortunately I don't get a response of the web service. In order to better understand my scenario I list here the ojects I use. I created all the objects how it was suggested in the above mentioned manual. Since I use a file adapter instead of the HTML Adapter I created two communication channels with File Adapters, one for each direction. After that I added a sender agreement and a receiver agreement for the new "File Service" and selected the previously created communication channels. Is there something else missing? How can I check if my soap adapter settings are working?
Regards,
Marc

File to SOAP Scenario Using BPM

Hi,
I am doing File to SOAP scenario using BPM.
while doing Integration Process in IR, i got the following error message
"Expression of simple type xsd:string expected"
But i have given xsd:string in the correlation element as well as in Data types.
I dont know why it is getting the error.
could you anyone please help me to sort out?
Regards,
Sai Ch.

Hey,
Check in the correlation editor, where you define the condition.
Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
regards,
Milan

File to Soap synchronous Scenario

Hi Experts,
I have designed an synchronous File to SOAP scenario in PI 7.31. I am able to send the request am getting the response to target path also correctly but am not able to see the msg in SXMB_MONI.am not using ICO am using dual stack in PI 7.31 plz help on this.
Regards,
Rajendar K

Hi Rajendar, what does your configuration look like? (e.g. Service Interfaces, Oparation Mapping)
I'm trying to do the same but SOAP response message is not getting back into IE. I have LOGGING_SYNC already set to 1.
Thanks, Aaron

File name to be read in mapping - File to SOAP Scenario

Hi all,
its a file to soap scenario. i need to send the file name also to target system. how can i get the file name in the mapping? is there a way to read the header information in mapping?
Regards,
Rashmi

You need to check for Adapeter specific Message Attributes of your File adapter.Then write user defined function to set Dynamic_configuration. So that you can get the file name in the header(u can chk this in SXMB_MONI after implementing the UDF, it will create one section for dynamic_configuration.)
Manisha

Sync File to SOAP scenario

Hey guys
i m doing a Sycn FIle to SOAP scenario(i guess i need BPM for that,right?)
lemme know if my configuration is correct
For sender FIle:
DT_sender,MT_sender,MI_sender,AI_sender(async)
For SOAP
DT_soap,MT_soap,MI_soap,AI_soap(sync)
For Receiver file
DT_receiver,MT_receiver,MI_receiver,AI_receiver.
and BPM would be
start>>Receive>>Sync send>>send>>stop
and ofcourse i need to import the WSDL for the webservice.
is this all,or i need to do some other designing too?
thanx
ahmad

Ahmad,
The weblog says you are sending a request from R3 using RFC. Then it gives back you the response from the webservice.
So first you have two scenarios:
Request:
Source: No datatype needed because you are importing the RFC.
Target: For this you need the datatype. Just create the datatype what he has mentioned.
Response:
Source : Just copy and paste the xsd. You import as an external definiton.
Target: Since your RFC is a synchrounous you will have the response for it. That is your target.
Then after that you do message mappings for request and response and then the interface mapping.
You dont need to have BPM for this interface. So dont worry about BPM for this interface.
Then you complete all the steps given in his weblog2. Then test it out.
---Satish

QOS File to SOAP scenario

I have a File to SOAP scenario which processes a file with many records and calls a webservice once per record.
The QOS of the sender File adapter is set to 'Exactly Once' but the SOAP messages have QOS 'Exactly Once In Order'.
I would like the SOAP messages to have QOS 'Exactly Once' to avoid messages going into 'Holding' status after an error occurs with a previous message.
Any suggestions greatfully received.
Thanks
Mark Briggs

Thanks for your suggestions. This scenario does not use BPM.
This is an asynchronous scenario as the sender is file based. The QOS of the File sender Adapter is set to 'Exactly Once'. I do not think it is possible to set the QOS of the receiver SOAP adapter. I understood that the QOS of the receiver was determined by the QOS of the sender.
The records in the source file are independent of each other and so I do not want subsequent messages to go into a holding status when a record is in error.
Is there any way to make the QOS of the receiver SOAP adapter 'Exactly Once'?

File to Soap Syn Scenario

Hi Experts,
I have created File to Soap syn Scenario.
I am getting following error in RWB (CC monitoring)::
SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/WRONG_VALUE; Params: SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(1), xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml, ST: ST_XMS_MSGHDR30_DYNAMIC; AdditionalText: An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC; ApplicationFaultMessage: null; ErrorStack: XML tag SOAP:Envelope(1)SOAP:Header(1)sap:DynamicConfiguration(3)sap:Record(1) (or one of the attributes) has incorrect value xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml An error occurred when deserializing in the simple transformation program ST_XMS_MSGHDR30_DYNAMIC Data loss occurred when converting xi_input120100406-133524-40720100406-133535-09520100406-133535-32920100406-133535-57920100406-133535-82920100406-133536-07920100406-133536-32920100406-133536-56420100406-133536-78220100406-133537-032.xml
Please suggest
T& R
Sushama

Hi Babu,
I am sorry if I was not clear in explaning.
Okay. I meant with the DC parameters the dynamic configuration parameters (or officially called the adapter specific message attributes or ASMA) that the file adapter added in the XI message. I assume Sushama activated this feature to transport the file adapter specific information (e.g., the file name, etc). These parameters are included in the DynamicConfiguration SOAP header. Sushama should check those entries in RWB at the adapter engine.
Some of those parameter values appeared to be too long and resulted in the quoted error:
>sap:DynamicConfiguration(3)sap:Record(1) (or one of the attributes) has incorrect value
Once which parameters are too long, Sushama can decide on how to resolve this issue using one of the options that I suggested in my previous reply.
I hope you got the idea this time.
Best regards, Yza

File to SOAP scenario question???

Hi,experts
let's take source system is A,target system is B.
I have a File to soap scenario using BPM,the scenario is send file request(from A) to PI,PI will be communicating target system(B) with soap(syn).After that, PI receives the soap response and send the response data to A.
Now the requirement is, we need to archive the file request msg(before sending to B) to a folder and archive the response msg(response from B) to a folder as well.how could it be achived?
any help will be much appreciated!
Thanks

Hello Rajesh_V2009 ,
I am trying to implement exactly the same pi scenario, but having some problems :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
<pns:name1>ajeet</pns:name1>
<pns:name2>phadnis</pns:name2>
</pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

File to Soap Scenario using UDF

Hi Guys
We have a requirement that said:
IF ShortDescription is not u201CNULLu201D then
map ShortDescription
ELSE IF ShortDescriptionLang with LanguageCode u201CENu201D is not NULL
map ShortDescriptionLang
So what I did is:
if( ShortDescription != "NULL")
map ShortDescription;
else if( (ShortDescriptionLang != "NULL" ) && ( LanguageCode == "EN") )
map ShortDescriptionLang;
But everytime when pressing f7 to check for errors I get thid:
C:/usr/sap/PI1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map0b27cd32dc2611df84e7000c2973cb67/source/com/sap/xi/tf/_MM_MATERIAL_TO_CATALOGUE_.java:441: '}' expected
Can someone suggest on how can I test this fucntionality cause one thing that I don't understand is the "map ShortDescription" and "map ShortDescriptionLang"
How do I put it on my if statement
Thanks,
Yonela

Hi All
On my FILE to SOAP Scenario I awant to map a field from my Target to get a Message ID on the moni like in the code below:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","XHeaderName1");
String value = conf.get(key1);
return value;
My is like this:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP","Messageid");
String id = conf.get(key1);
return id;
But the when presing f7 I get error:
C:/usr/sap/#####/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map1fee8942e00c11df9d67000c2973cb67/source/com/sap/xi/tf/_MM_MDM_MATERIAL_TO_CATALOGUE_.java:591: cannot return a value from method whose result type is void return value; ^ 1 error
So is it possible for me to use statement like this:
("http://sap.com/xi/XI/System/SOAP","Messageid");
Thanks
Yonela

File to SOAP scenario in PI 7.1

Hi
I am developing file to SOAP in 7.1 version and have the web service Url to call, Do I need upload the WSDL file of the SOAP into ESR under the external objects
Please let me know
Thank
PR

Hi,
it is not mandatory to upload the WSDLs of your webservice. You can create similar structure and call your webservice . But, using the WSDLs imported in your ESR you can save time spent in creating datatypes and message types. Even if you import WSDL under external definition, you need to create your service interfaces using WSDL.
Regards,
Reyaz

Scenario is file-pi-soap

Similar Messages

Maybe you are looking for